REPAIR / REPLACEMENT OF WOODEN / ALUMINUM / STEEL JOINERY, PANELING, TILLING, TOILET, REPAIR, SANITARY FITTING ETC IN OTM ACCN OF NCC OTA UNDER AGE B/R-II

Amount

Demolition of cement concrete of any description and in any position (un-reinforced) in ground floors and paving not exceeding 15cm thick (below or above GL) complete all as specified and directed. Note: Demolished material through out of MoD Land rate included above item.

M & L PCC (1:2:4) Type B-0 using 12.5 mm graded stone aggregate as levelling course/mass concrete complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for vitrified, coloured and printed tiles of light shade, 8 to 10 mm thick (Square / Rectangular ) polished area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm as in flooring over and including 15 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for vitrified, coloured and printed tiles of width as directed and 8 to 9 mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set over and including 15 mm thick cement screed bed in (1:6) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm mm thick as in skirting fixed over and including 10 mm thick cement screed bed in (1:4) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.with the colour of tiles complete all as specified and directed.

M&L for glazed ceramic tiles, coloured tiles 300mm x 450mm x 7 to 8 mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

Dismantiling of stone slabs and tiles of any description or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L for Granite slab 18 to 20 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bed CM (1:3) the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms includigng rounding off the exposed edges and polishing complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) Type C2 (using 40mm graded stone aggregate) as in plinth protection/hard standing and floor finishes surface even and fair without using extra cement complete all as specified and as diected

M&L for Forming Construction joint 30mm deepx10mm wide filled with sealing compound grade A complete all as specified and as diected.

Demolition of brick work /stone work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6).complete all as specified and as directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4).complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed. Note: Demolished material through out of MoD Land rate included above item.

M&L for 15 mm thick rendering in CM 1:6 on fair faces of brick/ concrete/ stone surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces, mixed with water proofing compound at the rate of 200ml per bag of cement finished even and smooth without using extra cement complete all as specified and directed. Note : (i) The quoted rate is inclusive of necessary scaffolding works. (ii) WPC shall be measured and paid under relevant item.

M&L for 5mm thick rendering (1:3) on fair faces of brick work or concrete surfaces of ceiling/chajja/fascia etc finished even and smoth without using extre cement complete all as specified and directed.

Supply only liquid water proofing compound @ 200 ml per 50 kg of cement.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper, over and incl a layer of 3mm thick wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer, colour of paint Golden colour or any other colour as directed and approved by Engr-in-charge, complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old wall surface by bruss , sand paper, surface repair if required, filling putty in holes etc on surface and applying two coat of oil bound distemper white or any tinted, complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying a coat of cement base paint on walls, facia, cornice, chajja complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying two coats of white wash complete all as specified and directed.

M&L for preparation of old existing surface and applying two coats of cement base paint complete all as specified and directed.

M&L for complete removal of existing treatment of plastered or unplastered surfaces walls and applying two coat of oil bound distemper over a coat of 3mm thick wall care putty on walls complete all as specified and directed.

M&L for complete removal of existing treatment of surfaces of walls of plastered or unplastered surfaces and applying two coat of cement base paint complete all as specified and directed.

Material & Labour for complete removal of existing treatment and applying two or more coats of 100% Premium acrylic emulsion weather proof paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces omplete all as specified & directed.

Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each complete all as specified and as directed.

Taking down shutter of any description exceeding 1.00 sqm but not exceeding 2 sqm each complete all as specified and directed.

S&F of Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeetc complete all as specified and directed.

S&F of Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm (Double rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeetc complete all as specified and directed.

S&F for factory made single extruded WPC (Wood polymer composite) solid decorative type Flush door shutter of size 30mm thick comprising of virgine polymer of K value 58-60 ( Suspension Grade), calcium carbonate and natural fiber( wood powder/ rice husk / wheat husk ) and non toxic additives ( maximum toxicity index of 12 of 100 gms) having minimum density of 650 kg/ cum and screw withdrawal strenght of 1800 N ( Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant. WPC to be laminaed with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with 100mm long stainless steel butt hinges 04 Nos with necessary full body threaded star headed counter sunk S S screws,complete all as per specified and directed

S &F of 30mm thick Flush shutters, soild core construction, with paticle board core and plywood face panels, commercial type, both faces are covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

M & L for 35 mm thick glazed and skeleton factory made shutters of 2nd class Hard Wood, open rebated and prepare to reveive glass, guage etc (without sash bars ) edges of framing plain chamfered or rounded, fitted with moulded beads both sides for securing glass etc, size of members of shutters as specified complete all as specified and directed.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L preperation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surface any description not otherwise described over 10 cm width or girth and complete all as specified and directed.

S &F of 200mm long aluminium anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed.

S &F in repairs 200mm long aluminium anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F aluminum handles cast type, anodized of 150 mm size complete all as specified and directed.

S&F in repairs aluminum handles cast type, anodized of 150 mm size complete all as specified and directed.

S&F of butt hinges 100mm long medium weight, cold rolled mild steel complete all as specified and directed.

S&F in repairs butt hinges 100mm long medium weight, cold rolled mild steel complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, overall length of cover plate 150mm , with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F of Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repairs Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repair galvanised wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised staples complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F of Steel work in tubular trusses curved or plain i.e, truss bottom, top bend, sides, side supports, holding plates, posts and base plates etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed.

S&F of Mild steel plates (plain or chequered) channel sections, square cut or notched forming holes with riveted, bolted or welded attachment etc confirming to Fe-290 (Gde E-165) complete all as specified and directed.

S&F of mild steel works in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F of Hand rails, half round or other steel section or core for wooden hand rail straight portion , drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing post including cutting tops to shape as directed, drilling holes, notching for wire , etc.; flat iron fillets ( for securing wire mesh etc. including all necessary drilling , bolting or rivetting , etc., and similar work conforming to Fe 290 Gde E 165 with and including applying two coats of synthetic enamel paint over a coat of primer alround before fixing in position complete all as specified and directed

Dismantling of AC (corrugated / semi-corrugated) sheets in roof covering including any type of ridges complete all as specified and as directed.

S&F Pre painted galvalum corrugated steel sheet 0.50 mm thick having aluminum zinc coating 150 gsm/sqm of any colour having tensile strength of 550 Mpa as in Roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F Pre painted galvalum plain steel sheet 0.50 mm thick having aluminum zinc coating 150 gsm/sqm of any colour having tensile strength of 550 Mpa as in Roof covering/cladding (ridge) to wall fixed with self tapping screws complete all as specified and directed.

S&F for framed work such as grills gratings, etc, with ends of bars shouldered and or riveted , or forged into spikes, framed guard bars , barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 GDE -165, complete all as specified and directed.

S&F in repair 3mm thick ordinary glass pin head type and glazing with oil putty, silicon or S wooden beads, in squre n exc 0.5 sqm in each pane including hacking out aid broken glass of any thickness and any description from wooden/steel frame/stone concrete or block surrounds complete all as specified and directed

S&F in repair galvanised wire cloth, .48mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised staples complete all as specified and directed

S & F in repairs 30mm width of flaps (when open) Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed

S & F in repairs Mild steel Drawers or almira handles, projections drop (50mm to 65mm) on screwed plate complete all as specified and directed

S & F in repair 150 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

S & F in repairs 150mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed

S&F in repairs 25mm dia stainless steel curtain rod not less than 0.80mm thick including fixing of sufficient brackets ( minium 2 nos at every 1.50m length) & end Knobs complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs mild steel Chromium plated grating 100 mm dia to Nahani traps, complete all as specified and directed.

S&F in repair viterous china wash down water closet pan (pedestal pattern) white excluding fixing bolts,flushing cistern and flush pipe including connection to drain and to flushing pipe syphonage pipe etc and mild steel chromium plated or aluminised hinges device & on CP Jet complete all as specified and directed.

S&F in repairs wall mounted one piece(Including Flushing Cistern) pedestal pattern water closet with seat cover and inbuilt flush tank Size (mm) 380 x 630 X 770 Also available in Soft Closing Seat Cover).

S&F in repairs for vitreous china squatting pan, orissa pattern sise 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps and connection to trap and to flushing pipe to complete and making good to floor, complete all as specified and directed.

S&F in repair for PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle handle including bracket complete of capacity 10 litres, complete all as specified and directed.

S&F in repair for 15mm dia PVC connection with PTMT nuts of length 450 mm, heavy duty, steel wire mesh coated complete all as specified and directed.

S&F in repair for 15mm dia PVC connection with PTMT nuts of length 600 mm, heavy duty, steel wire mesh coated complete all as specified and directed.

S&F in repairs of vitreous china wash basin, white, flat back, size 550 x 400mm excluding taps, waste, chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets complete all as specified and directed.

S&F in repairs 32mm dia ribbed PVC waste drain pipe for WHB, urinal etc, stretched length 90cm with PVC coupling socket complete all as specified and directed

S&F for in repairs waste coupling fittings, brass chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly nuts, flange end bedded in red lead cement and other fixed 32 mm dia bore complete all as specified.

S&F in repairs Brass chromium plated bottle traps 32mm bore of trap for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed.

S&F for in repairs for 15 mm Stop valve cast copper alloy screwed down high pressure with CAPSTON HEAD handle chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore or for unions complete all as specified and directed.

S&F for in repairs 15mm, pillar taps fancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and directed.

S&F in repairs 15mm angle cock chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed and complete all as specified and directed. .

S&F in repairs for 15mm, bib tap Fancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified

S&F in repairs for shower rose brass chromium plated without swivel joints, 125 mm in size including fixing to steel pipe complete all as specified and directed.

S&F in repairs for shower rose brass chromium plated without swivel joints, 300x300 mm in size including fixing to steel pipe complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with chromium plated bracket and guard and railing 60cm long completed all as specified and directed

S&F for in repairs Brass CP WHB mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified.

S&F for in repairs Soap dish of CP fixed with pvc rawal plugs and screw, complete all as specified and directed.

S&F in repair brass cromium plated tubular towel rail D type 20mm dia and 60cm long complete all as specified and directed.

S&F in repair for mild steel peg set of solid body 125mm to 175mm fixed to wall with PVC plugs and screw, complete all as specified and directed.

S&F for in repairs Health Faucet (ABS Body) mild steel chromium plated 15 mm dia with 1.25 meter PVC flexible body pipe of CP including fixing bracket, complete all as specified and directed.

S&F in repairs for wall mixer 15mm dia with Three in one pattern in of brass CP, complete all as specified and directed.

S&F in repairs Toilet paper holder with flat recessed type stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F in reair PVC bath room cabinaet mirror of Size 500mmx400 mm complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) of any description and in any position including all fittings, heads, shoes, bend, swan necks etc (measured overall as fixed along the centre line over fittings and accessories) complete all as specified

S&F for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified

S&F for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified

S&F for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified

S&F for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified

S&F for 110mm dia PVC (SWR) pipe bends any radious complete all as specified and directed.

S&F for 75mm dia PVC (SWR) pipe bends any radious complete all as specified and directed.

S&F for 110mm dia PVC (SWR) pipes junction single (single T/Y) equal or unequal any radious with access door complete all as specified and directed.

S&F for SWR bends 75mm provided with access door complete all as specified and directed.

S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and directed.

S&F Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia around iron stays including bolt and nuts for securing ends of stays to walls or roofs, bore pipe 100 mm dia pipe complete all as specified and directed.

S&F Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia around iron stays including bolt and nuts for securing ends of stays to walls or roofs, bore pipe 75 mm dia pipe complete all as specified and directed.

M&L for PVC (SWR) gully trap 125 /100 plain with grating incl. jointing with solvent cement as in repair, complete all as specified and directed.

Dismantling of water tanks exc 250 ltr and n.exc 500 ltr capacity and removing from site complete all as specified and as directed.

Dismantling of water tanks exc 500 ltr and n.exc 1000 ltr capacity and removing from site complete all as specified and as directed.

S&F Rotational moulded polyethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triple layer in construction white in colour hoisted and fixed in position complete all as specified and directed.

S&F Rotational moulded polyethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triple layer in construction white in colour hoisted and fixed in position complete all as specified and directed.

S&F for 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed in 20mm dia pipe. (Minimum weight 15mm-142gms, 20mm-210gms, 25mm-455gms, 40mm-690gms) complete all as specified and directed.

S&F in repairs for 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed in 20mm dia pipe. (Minimum weight 15mm-142gms, 20mm-210gms, 25mm-455gms, 40mm-690gms) complete all as specified and directed.

M&L for chequered cement concrete tiles of size 20cmx20cmx25 mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in cm (1:6) complete all as specified and directed.

M & L for PCC (1:3:6) Type C-2 (40mm graded aggregate), 75 mm thick as floor surfaces concrete complete all as specified and directed.

S&F in repair of Flushing jet Spray (chromium plated) for pedestal pattern EWC including 1.00 metre tube flexible pipe and brass chromium plated nuts completed all as specfied and directed.

S&F in repair corner glass shelf 300mm (with ABS Bracket ) complete all as specified and directed.

S&F in reapir plastic water closet seat cover white coloured closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devise complete all as specified and directed.

S&F in repairs Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S&F for in repairs vitreous china urinals, Half stall type ,white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

Providing and fixing of SFRC (Steel Fiber Reinforced Concrete) cover and frame (heavy duty, HD-20 grade designation) of any size level thick 100 mm, providing with lifting handles both sides complete size and design as per site requirement and directed.

Taking down of Wall panelling and similar work complete all as specified and directed.

S&F of Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, colour and design as directed and approved.

S&F of 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

J.N.R. Engineers and Builders (BID ID -3515234)

M/s KGN Builders (BID ID -3502080)