Work of conversion of 11KV overhead network of Torla feeder to 11KV underground system along the road side from 33/11KV Shiroda Sub-Station under Sub Division II, Division-X, Ponda in Shiroda Constituency.

Amount

COST OF MATERIAL

Supply of RCC Hume Pipe 100mm dia with required no. of collars, for road crossing

Supply of GI Pipe 100mm, class B for nalla crossing and for cable rising on D.P. of DTC

Supply and layingof of Sand for cushioning of HT underground cables.

Supply of 11KV, 3 core 300 sq.mm A2XFY Aluminium Armoured XLPE Cable through conventional open trenching method in any type of soil including hard laterite.

Supply of straight through joint for 300sq.mm cable

Supply and laying of RCC protective covers of size 600mm long x 250mm width and 50mm thick capable of bearing load of 135Kg. And covered with earth, sand upto depth of 0.15mts. Confirming to IS 1255 1967 at non-road crossing.

Supply and laying of Warning tape.

Providing and laying in position cement concrete 1 is to 2 is to 4 (1 cement is to 2 coarse sand is to 4 graded granitic or basaltic stone aggregate 40 m nominal size for foundations.

12mm cement plaster 1 is to 4 (1 cement is to 4 fine sand) for foundations.(supply and providing)

Supply of 11KV, 630 Amps, Outdoor, SF6 Ring Main Unit with two Load Break Switches and one Circuit Breaker .

Supply of 11KV, 630 Amps, Outdoor, SF6 Ring Main Unit with three Load Break Switches.

Supply of 11KV, 3 core, 95sq.mm, Al conductor, XLPE, insulated, armoured cable (from the RMU to the transformer)

Supply of 11KV 3 phase indoor terminating kit to be used with cables 300sq.mm.

Supply of 11KV 3 phase outdoor terminating kit to be used with cables 300sq.mm.

Supply of 11KV 3 phase indoor terminating kit to be used with cables 95sq.mm.

Supply of 11KV 3 phase outdoor terminating kit including sockets at 11KV end of DT to be used with cables as per 95sq.mm.

Supply of Cable Route marker

Supply of Earthing complete with 40mm GI Pipe, 2.5 mts long alongwith 20 kgs each salt, charcoal complete.

Supply of HDGI flat of size 25mm x 5mm for earthing.

Cost of Erection

Earthwork in excavation by mechanical means (hydraulic excavator) or manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in is to Hard Soil for TRENCH AND RMU

Erection of RCC Hume Pipe 100mm dia with required no. of collars, for road crossing

Erection of GI Pipe 100mm, class B for nalla crossing and for cable rising on D.P. of DTC

Erection of 11KV, 3 core 300 sq.mm A2XFY Aluminium Armoured XLPE Cable through conventional open trenching method in any type of soil including hard laterite.

Erection of straight through joint for 300sq.mm cable

Refilling the pipeline, foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge

Disposal of earth at a distance of 3000 mts

Centering and shuttering including struttings, propping etc and removal of formwork .

Erection of 11KV, 630 Amps, Outdoor, SF6 Ring Main Unit with two Load Break Switches and one Circuit Breaker .

Erection of 11KV, 630 Amps, Outdoor, SF6 Ring Main Unit with three Load Break Switches.

Erection of 11KV, 3 core, 95sq.mm, Al conductor, XLPE, insulated, armoured cable (from the RMU to the transformer)

Erection of 11KV 3 phase indoor terminating kit to be used with cables 300sq.mm.

Erection of 11KV 3 phase outdoor terminating kit to be used with cables 300sq.mm.

Erection of 11KV 3 phase indoor terminating kit to be used with cables 95sq.mm.

Erection of 11KV 3 phase outdoor terminating kit including sockets at 11KV end of DT to be used with cables as per 95sq.mm.

Erection of Cable Route marker

Erection of Earthing complete with 40mm GI Pipe, 2.5 mts long alongwith 20 kgs each salt, charcoal complete.

Erection of HDGI flat of size 25mm x 5mm for earthing.

Cost of Dismantling

Dismantling, Removal of 9mtr long RCC pole

Dismantling, Removal of M.S. Rail Poles 90 lb by yd 13 mts

Dismantling, Removal of 11KV Pin Insulator with GI Pin

Dismantling, Removal of 11KV HDGI 11 KV V shape cross arm

Dismantling, Removal of HDGI cross arm clamps for RCC Pole 11.00 mtr L.A, S.A.

Dismantling, Removal of HDGI cross arm clamps for RCC Pole 9.00 mtr L.A., S.A.

Dismantling, Removal of HDGI cross arm clamps for 90 lb Rail Pole LA

Dismantling, Removal of Top Fitting cross arm ISMC channel, 75 x 40mm, 0.7mts long.

Dismantling, Removal of 45KN Disc Insulators with Metal parts

Dismantling, Removal of Cut point Channel 1.3 Mtr long

Dismantling, Removal of Guard Channel 1.5 Mtr Long

Dismantling, Removal of ACSR conductor WEASEL

Dismantling, Removal of GNAT Conductor

Dismantling, Removal of Stay set of 9mtr long RCC pole