Supply and Installation of Hospital Furniture for Medical Centre at Main Campus Shalimar, SKUAST-Kashmir

Executive Table Knock-down structure with overall size 1200mm x 600mm x 750mm to be assembled at site. The worktop to be made of 25mm thick pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The table top shall be supported on CRCA rectangle pipe having cross-section area 40mm x 20mm duly powder coated. A pullout keyboard tray shall be provided of 18mm thick Pre-laminated particle board of size 550mm x 280mm. The tray shall be operated on keyboard channel. The table shall be clad with modesty panel which provides structural support for the table. It should be 1mm thick made up of high yield strength CRCA sheet of grade 'D' conforming to IS:513 duly perforated connected with both ends. The table under-structure shall have metal base C-type leg having cross-sectional area 60mm x 30mm. There shall be PPCP shoe provided at the base to avoid scratches on the floor. A mobile pedestal shall be provided with an overall size 400mm x 450mm x 660mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top facia shall be 18mm thick and drawer base 9mm thick. The pedestal shall have 3 drawers i.e. 2 box drawers and 1 filing drawer. The drawer shall be operated with SS handle and easily close & open mechanism with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism to synchronize all the drawers get locked with one single key. The pedestal shall be mounted over 50mm injection moulded nylon castor. The overall structure should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tests as per IS 2380.

Mid-Back Chair Chrome Cushion Arm, Swivel Tilt, Gaslift, Chrome Plated Metal Base Ergonomically designed, comfortable & aesthetically appealing Mid back chair. The seat shall be made of metal insert MS CRCA chrome plated upholstered with high resilience polyurethane foam 30mm thick having density 60kg/m³ with leatherite tapestry 0.8mm thick and 535 GSM and the back shall be supported by MS CRCA chrome finish upholstered with high resilience polyurethane foam 30mm thick having density 30kg/m³ with leatherite tapestry 0.8mm thick and 535 GSM with contoured lumbar support which helps to provide full back support and maintain the natural curvature of the spine. The seat and back shall be fixed with metal frame and the armrest shall be used of chrome pipe with cushion having complete joint with seat and back. The chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating should enable the user to adjust seat height upto 120mm with BIFMA standard class-3 gas-lift to suit using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal shall be made up of MS CRCA chrome plated having pitch circle Dia 700 mm fitted with 5 nos. 50mm twin wheel castors made of injection moulded black nylon 30% glass filled having self lubricating property for friction free movement with BIFMA standards. The Seat size shall be 510±10 mm(W)x480±10 mm(D) and back size shall be 510±10 mm(W)x480±10 mm(H) from seat & overall back height = 530±10 mm. overall height = 890±10 mm- 990±10 mm.

Medium Back Chair, Chrome Cushion Arm, Chrome Plated Metal Frame Ergonomically designed, comfortable & aesthetically appealing visitor chair. The seat shall be made of metal insert MS CRCA chrome plated upholstered with high resilience polyurethane foam 30mm thick having density 60kg/m³ with leatherite tapestry 0.8mm thick and 535 GSM and the back supported by MS CRCA chrome finish upholstered with high resilience polyurethane foam 30mm thick having density 30kg/m³ with leatherite tapestry 0.8mm thick and 535 GSM with contoured lumbar support which helps to provide full back support and maintain the natural curvature of the spine. The seat and back shall be fixed with metal frame and the armrest shall be used of chrome pipe with cushion having complete joint with seat and back. The frame structure shall be cantilever support type made up of MS/CRCA chrome plated circular pipe having dia. 25.4mm. There shall be co-polymer polypropylene shoe provided at the base to avoid scratches on the floor as well as uneven surfacing. The Seat size shall be 510±10 mm(W)x480±10 mm(D) and back size shall be 510±10 mm(W)x480±10 mm(H) from seat & & overall back height = 530±10 mm. overall height = 890±10 mm.

Revolving Stool Cushioned Top, Stainless Steel Structure, Height Adjustable (510mm - 690mm) Diagonal Leg Dia 538 mm. The seat shall be made of 15 mm thick plywood upholstered with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ with leatherette tapestry 0.8mm thick with spin section of thickness 1mm & non corrosive. It has a diameter of 305mm, seat base made of MS ring and rectangular tube. EN8 Screw having dia of 22 mm is used for height adjustment of the seat base. The round hub made of MS ERW tube having dia of 38mm and thickness 2 mm. The Hub is welded with the legs and it accommodates and covers the lead screw mechanism. The under-structure consists of 4 legs made up of MS ERW tube of diameter 25.4 mm and 1.6mm thick. The press formed pipe leg shall give a round & clean look. All the legs are Provided with 4 No. Nylon-6 bush. All metal components are pre-treated with zinc phosphating in 7 tank process and then powder coated with epoxy polyester powder coating . Safe working load is 135kg.

Examination Couch Overall approx. dimension: 1875 mm L x 640 mm W x 850 mm H With footrest, Gas Spring, Three Drawers & Three Cabinets, Powder coated Table top approx. dimension: 1875 mm L x 575 mm W • Construction made from mild steel CRCA tubes and sheets • Two section mild steel CRCA sheet top • Headrest adjustable on gas spring • Three drawers with locks • Three cabinets with one having lock • Complete with B.P. apparatus tray, Foam mattress covered with raxine and Built-in Step Stool Pretreated and powder coated finish

Casualty Bed Detachable Moulded Polymer Head and Foot Panel, Backrest Adjustable, Upper Leg Adjustable, MS Parts Powder Coated. Overall Dimension - 2170mm X 1050mm Mattress area divided into 4 sections made up of CRCA Sheet. • Detachable polymer moulded head and foot bows provide a soothing look. • Corner PU buffers absorb impact and reduce damage in handling. • Provided with Collapsible safety side rails. • Castors of 125 mm dia with diagonal locking are provided for mobility with control. • The complete metal components are pre-treated and epoxy powder coated. • Adjustable Back rest and Knee rest Trendelenburg & Reverse Trendelenburg, High -Low Positions obtained by smooth crank System with foldable handles

Semi Fowler Bed Detachable Moulded Polymer Head & Foot Panel, Crank Mechanism, Powder Coated. Overall Dimension - 2010mm X 900mm X 600mm Mechanically operated by smooth crank system Adjustable back rest, operated smoothly by foldable screw handle from foot end Two-sectional Uniformly Perforated CRCA Sheet Top Superior-quality ABS plastic head panel and foot panel Four locations on bed frame for telescopic IV pole Mounted on Rubber Stumps Pre-treated and Epoxy Powder Coated

Bed Side Locker One Box & One Drawer, SS Top With Three Side SS Railing, Powder Coated. Overall Dimension: 400mm x 400mm x 800mm Locker cabinet and drawer made from mild steel CRCA sheet • Stainless steel top with raised edge on three sides • Cabinet door with magnetic catcher • Mounted on four castors 50 mm dia, two with brake • Pre treated and powder coated finish

Operation Theatre Table Four Function Electric, with hand remote and Backup Panel Heavy-duty SS 304 construction with radiolucent top suitable for C-Arm procedures. Four electric functions: Height Adjustment, Trendelenburg, Reverse Trendelenburg, and Lateral Tilt. Height range approx. 700–1000 mm with smooth, stepless electric movement. Backrest, headrest and leg section manually adjustable for multiple surgical positions. Safe working load minimum 200–250 kg. Jerk-free electric actuators with handheld remote control. Heavy-duty, anti-static mattress included (waterproof, removable). Floor-locking system for stability; easy-clean, disinfectant-resistant surfaces. Supplied with essential OT accessories: arm boards, leg supports, anaesthesia screen rod.

Suction Machine Electric 1/4 Hp Heavy-duty motor with oil-free, maintenance-free vacuum pump. Minimum vacuum pressure: 600–650 mmHg with adjustable vacuum control. Suction capacity: 20–30 LPM (litres per minute) suitable for OT, ICU, and emergency use. Equipped with 2 × 1-litre unbreakable polycarbonate jars with overflow safety valve. Noise level below 60 dB, smooth and vibration-free operation. Bacterial filter and tubing set included; autoclavable accessories. Mounted on anti-vibration base with easy-carry handle or trolley type (as required). Suitable for continuous duty cycle with thermal overload protection.

• Stretcher • Deluxe Trolley, Two Section Top with Moulded Mattress, Ratchet Mechanism, Powder Coated. • Overall approx. dimension: 2030 mm L x 620 mm W x 880 mm H Strong Mild steel tubular construction • Removable MS stretcher top supported on tubular frame With Cushioned Top, Backrest Adjustable on Ratchet • Provided with SS rails, Tray and Iv Rod. • Four heavy duty castors 150 mm dia, two with brake Pretreated and powder coated finish

Wheel Chair (Rigid) Adjustable Aluminium Footrest, Break Handle SS 202 FRAME, Overall Dimension - 700mm x 1050mm x 980mm

Four-Fold Screen Four Fold Screen, MS Frame With Curtain Overall Dimension - 1675mm (H) x 2450mm (L)

ECG Trolley SS Top- Detachable, One Drawer, Powder Coated, Overall Dimension - 615mm X 510mm X 850mm. Framework is made up of CRCA Two SS shelves with three sides railing on top shelf and 3 sides Raised. Provided with one Drawer All metal components are pretreated and epoxy powder coated

Double Footstep Stool Powder Coated, Overall Dimension - 300mm X 500mm X 450mm (Double Step Stool). Mild Steel finish with Epoxy Powder Coated

Waiting Chairs (03 in one) Three Seater With 4 PU Arm, Powder Coated Understructure, Metal Insert PU Seat and Back Size in mm - 1690(L) x 630(D) x 790(H)

Sofa Three Seater, Wooden Frame, SS Pipe Leg Frame, Seat Back Tapestry, Size in mm - 1900(L) X 770(D) X 800(H) Constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm padded with high resilience polyurethane foam having density 40Kg/m³. The structure shall be upholstered with leatherite tapestry 1±0.2 mm thick and 571 GSM. The understructure shall consist of pipe frame loop leg of SS shiny chrome finish having cross-section area 40mm x 20mm. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat size shall be 510±10 mm(D) x 1540±10 mm(W), seat height = 435±10 mm, overall width = 1900±10 mm, overall depth = 770±10 mm & overall height = 800±10 mm.

Centre Table SS Pipe Frame Chrome Finish, PLPB Edge Banded Top, 18mm Thick, 1200mm x 600mm Overall size 1200mm x 600mm x 450mm. The top of the table shall be made of 18mm thick Pre-laminated particle board of grade II of IS 12823. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The understructure shall consist of SS 202 grade pipe frame with shiny chrome finish with an overall size 40mm x 20mm with 1.6mm thick. One No. footstep shall be provided between the frame with same size i.e. 40mm X 20mm. There shall be PPCP shoe provided at the bottom to avoid scratches on the floor.

Steel Personal Locker The locker shall have 6 doors. It shall be (like top, side, back, door, shelf etc.) made of 0.8mm thick high yield strength CRCA sheet of grade ‘D’ conforming to IS: 513. The main frame and base shall beache semi welded and folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly distributed load capacity of each shelf shall be 40 Kg. The door shall be operated with aesthetically appealing snap fit ABS plastic handle and concealed crank hinge. Adjustable leveler shall be provided with metal insert to resist scratches on the floor and also level & support structure. The structure shall be supplied with white powder coat 40-60µ thick with 13 tank phosphate process. Overall size of the pedestal shall be 900mm (W) x 450mm (D) x 1830mm (H).

• Crash Cart • Complete SS Frame, Polystyrene Lockable Storage, Overall Dimension - 970mm X 500mm x 1630mm • Stainless steel tubular framework and SS shelves. • Six removable plastic bins and two polystyrene lockable storage units with two drawers having containers of different sizes • Four heavy duty castors 125 mm dia, two with brake Complete with four corner buffers, SS IV Rod, Cardiac massage board and Oxygen cylinder holder (MS)

Dental Chair, Revolving Without Arm, Chrome Plated Pipe Frame with Foot Rest, Nylon Base, Gas Lift, Seat & Back Leatherette Tapestry. The seat shall be made of 15mm thick hot pressed commercial plywood upholstered with high resilience polyurethane foam 30mm thick having density 32kg/m³ with leatherite tapestry 0.8mm thick and 535 GSM and the back shall be made of metal insert pipe upholstered with high resilience polyurethane foam 25mm thick having density 32kg/m³ with leatherite tapestry 0.8mm thick and 535 GSM. The seat and back shall be fixed with metal pipe. The chair shall have 3600 revolving mechanism. The pneumatic seat height adjustment for healthy seating should enable the user to adjust seat height upto 240mm with BIFMA standard class-3 gas-lift to suit using the lever under the seat. Footrest shall be provided of MS chrome plated round pipe of Dia 16mm. The Pedestal shall be made up of injection moulded black nylon having pitch circle Dia 650 mm fitted with 5 No. 50mm gliders made of injection moulded black nylon 30% glass filled. The seat shall be 440±10 mm (D) x 455±10 mm • (W) and back size shall be 535±10 mm (W) x 260±10 mm (Ht) from seat. Overall height shall be = 875±10 mm.

Chair for Sample Collection Blood Donation Chair With Recline, Cushion Seat & Back With Arm, Leatherette Tapestry, Ms Powder Coated Frame

Bed Side Stool Powder Coated, Overall Dimension - 300mm X 300mm x 510mm Top plate made of MS CRCA sheet with section of thickness 1 ± 0.2mm & non corrosive. It has a square of 300± 10mmmm, seat base made of MS rectangular tube. The under-structure consists of 4 legs made up of MS ERW tube of diameter 25.4 mm x 25.4 mm and 1.2mm thick. The press formed pipe leg gives a round & clean look. All the legs are Provided with 4 No. of Nylon bush. All metal components are pre-treated with zinc phosphating in 7 tank process and then powder coated with epoxy polyester powder coating.

Dressing Trolley Stainless Steel tubular Frame. Overall Dimension: 610mm x 475mm x 850mm. Two SS shelves with three side railings on top shelf. Four heavy duty castors 100 mm dia, two with brake

• Bed Side Table (Adjustable) • Height Adjustable Through Gear Mechanism, Wooden laminated Top, Stainless Steel Structure, Overall Dimension - 760mm X 400mm, Frame work of rectangular mild steel tubes • Mounted on 50mm swiveling noiseless casters • Fixed with wooden laminated top Height adjustable by Knob Mechanism. Pre treated and epoxy powder coated

Trolley with Dust Bins Heavy-duty MS trolley frame designed for 4 colour-coded bins (25 L each). Each bin pedal operated for hands-free opening as per biomedical waste norms. Bin capacity: 25 litres × 4, high-grade, durable, easy-wash plastic bins Mounted on 100 mm dia non-rusting castor wheels, 2 with brakes. Smooth, silent movement with anti-thread guards and heavy-duty wheel housings.

Officer Chair Wooden Frame, Wooden Arm, Torsion Bar, Gas lift, Wooden Base Ergonomic design, comfortable & aesthetically appealing. The seat and back frame shall be made up of the combination of 15mm thick hot pressed commercial plywood and ply-board padded with high resilience polyurethane foam (50+19+30)mm thick having density (40, 32 & 32)kg/m³ in seat and (40+30)mm thick having density (32, 32)kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine for lumbar support which helps to provide full back support as well as head support. Seat and back shall be covered with polished wooden at both side for decorative appearance. The chair shall be supplied with natural wood arm having melamine polish and cushion base leatherite covering top. For seating durability the chair shall have torsion bar 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating should enable the user to adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMAx5.1-2011 standards. The Pedestal should have five legged metal insert CRCA covered with natural wood having pitch circle dia. 700 mm fitted with 5 No. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon, conforming to ANSI/BIFMA standardsx5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 510±10 mm(D) x 530±10 mm(W) and back size shall be 530±10 mm(W) x 735±10 mm(H) from seat. Overall height shall be = 1160±10 mm, overall depth = 705±10 mm & overall width = 700±10 mm.

Officer’s Table Modular table in completely knock down conditions with an overall size 2100mm x 1800mm x 750mm to be assembled at site. Top shall have the size 1900mm x 900mm made up of 45mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The table top shall be supported on 75mm Peg mounted over side storage unit and fixed pedestal. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 45mm thick Pre-laminated particle board and profile shall be in linear shape with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It shall be 18mm thick Pre-laminated particle board in linear shape with appropriate PVC edge banding connected with both ends. The table shall have side unit for storage purpose with an overall size 1800mm x 510mm x 625mm. The side unit shall be made up of Pre-laminated particle board of grade II of IS 12823 with top and side 45mm thick and drawer base 9mm thick & other parts 18mm thick like shutter, back, facia, etc. It shall have 3 drawers and 2 sliding shutters. Each drawer shall be operated with SS handle and with easily close & open mechanism with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawers are synchronized to get locked with one single key. To protect the wall from kicks, abrasion to serve as a decorative moulding, skirting shall be provided at bottom. A hanging pedestal shall be provided with an overall size 455mm x 685mm x 485mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, facia shall be 18mm thick & drawer base shall be 9mm thick. The pedestal shall have 2 No. drawers. Each drawer shall be operated with SS handle and easily close & open mechanism with the assistance of sliding channels to enable operation. The drawer shall have central locking mechanism in which all the drawers shall get locked with one single key. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw- withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.

Steel Almirah Overall size shall be 915mm (W) x 485mm (D) x 1980mm (H) including legs. The almirah shall be provided with 2 Doors, 4 No. adjustable shelves i.e. 5 loading compartments. All components shall be made of 0.8mm thick high yield strength CRCA sheet of grade ‘D’ conforming to IS: 513. Stiffeners shall be provided in shelf & door. The steel hinged door shall be provided with locking mechanism which is assembled with bolt arrangement. The shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly distributed load capacity per each shelf shall be 40kg. The complete steel structure shall be constructed by welding, finishing with epoxy polyester powder coated to the thickness of 40-60µ (DFT).

Steel Personal Locker Overall size of Personal Locker Unit with add on units shall be of dimensions 900mm(W) x 400mm(D) x 1850mm(H) having 15 locker units. Stackability shall have add-on units that can be stacked width wise to form bank of lockers having common side panel. Locking shall have Pad-lock. Material shall be CRCA 0.8 mm thickness. Shelf shall be uniformly distributed. Load capacity per shelf level is 35 Kg maximum. Finish shall be epoxy polyester powder coated to the thickness of 50 microns. Handle/Label holder shall be aesthetically appealing Snap fit ABS plastic handle. Ventilation shall be of attractive punched pattern.

Note:-The rate to be quoted by the bidder should be in single percentage as above or below the estimated cost (aggregate) to cover all the costs, taxes, charges, whatsoever and the University shall not be liable to pay any extra charges in any shape including taxes

Please Enable Macros to View BoQ information