Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.7 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹20.2 L+₹1.2 L (6.53%)Rejected-Finance MOHALLA KAMA KHAN WARD NO 07 HOUSE NO 88 DISTT POONCH J K | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹23.0 L+₹4.0 L (21.2%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹24.5 L+₹5.5 L (28.9%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹25.9 L+₹7.0 L (36.8%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹24 L
EMD Value
₹48,000
Closing Date
2 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 881 EWS C/o 56 APO
GE 881 EWS C/o 56 APO
SPECIAL REPAIR TO BLDG NO P-33 (ESH-06) AND P-35 (ESH-10) AT MENDHAR UNDER GE 881 EWS
2022_MES_543575_1
GE/PNH-36/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE 881 EWS C/o 56 APO
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE 881 EWS
₹48,000
Yes
19 Nov 2022
5 Aug 2022
8 Sept 2022
5 Aug 2022
2 Sept 2022
20 Aug 2022
60 days
Amount
Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and directed.
M&L for 100mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in floor/hardstanding/path and finishing the surface even and fair without using extra cement, complete all as specified and directed.
Supply and fix glass dividing strip 3mm thick 28mm width,inserted in flooring, complete all as specified.
M&L for 50mm thick PCC 1:3:6 Type C-2 (using 40mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, including filled the joints with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.
Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.
M&L for walling of random rubble stone/boulder masonry brought upto course, well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete all as specified and directed.
Taking down cement plaster of any description on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc. complete all as specified and directed.
M&L for rendering 15mm thick on other than fair faces of brick or stone masonry wall surfaces in cement mortar 1:4 with mixing of liquid water proofing compound @ 3 % of cement and finished the surface even and smooth without using extra cement, complete all as specified and directed. Note: WPC shall be measured and paid separately
M&L for 10mm thick rendering in CM 1:6 on fair faces of brick orconcrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for 5mm thick rendering in CM 1:3 on fair faces of brick or concrete surfaces of ceiling & finishing the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for preparation of newly plastered / unplastered surfaces of wall including cornices pilaster etc, and applying two coats of cement base paint over a coat of white wash complete all as specified and directed.
M&L for preparation of newly plastered / unplastered surfaces of wall including cornices pilaster etc, and applying two coats of OBD over & incl a coat of chalk whiting and 1mm thick wall care putty complete all as specified and directed.
M&L for preparation of newly plastered / unplastered surfaces of ceiling and applying two coats white wash complete all as specified and directed.
M&L forcomplete removal of existing treatment and applying two coats of OBD over and including 1mm thick wall care putty complete on wall surfaces complete all as specified and directed.
M&L for preparation of old plastered/ un-plastered wall surfaces including brooming down or steel wire brushing, scraping down, smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots, and applying one coat of cement base paint, complete all as specified and directed.
M&L for preparation of old decorated surfaces of ceiling and applying two coats white wash complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed.
M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.
M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutter and similar works fixed with self tapping screws complete all as specified.
Dismantling wrought iron or mild steel work of any description complete all as specified and directed.
S&F rolled mild steel works as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee,angle, channel or flat sections) including distance pieces, cleats etc Fe 290(Gde E 165), complete, complete all as specified
S&F MS flat iron as in wind ties for roof confirming to Fe-290 Gde E-165 including hook or nuts, bolts, and necessary drilling etc complete all as specified
S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples; chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed.
M&L for two coats of synthetic enamel painting on new or old steel surfaces over 10cms width or girth over a coat of red oxide primer etc all as specified and directed.
Taking down chowkats with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed.
S&F box type steel window glazed and gauged (combination) with side hung/ top hung shutter including box type/ projecting type hinges and steel peg stay, handle and locking arrangement (02 Nos MS tower bolts 150 mm long for each leaf) and frame made out of 1.25mm thick pressed steel frame complete including necessary cooler arrangement in window and guard bars or 4mm dia galvanized steel wire 50 mm x 50 mm size mesh including one coat of red oxide zinc primer and all as per sample kept at GE office and complete all as specified and directed by Engg-in-charge.
S&F sheet glass, ordinary quality, 4 mm thick and glazing with oil putty or wooden beads, in square n exc. 0.5 Sq.m pane, complete all as specified and directed.
Supply only liquid water proofing admixture complete all as specified and directed.
S&F in repair PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint, laid in floor or trenches as soil pipe, complete all as specified and directed.
Taking down existing tar felt & existing lightening conductor and re-fixing the lightening conductor in same location after completion of roof treatment in functional condition including repair/replacement if required and Demolition of lime / cement concrete & screed bed complete from roof surfaces including parapets and lowering without disturbing the existing RCC roof slab and removing the same to a distance exc. 50m and n. exc. 100m including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc., complete all as directed and directed.
M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in roof padding, complete all as specified and directed.
M&L for rendering 10mm thick on other than fair faces of brick or stone masonry wall surfaces in cement mortar 1:4 with mixing of liquid water proofing compound @ 3 % of cement and finished the surface even and smooth without using extra cement, complete all as specified and directed. Note: WPC shall be measured and paid separately
M&L for water proofing treatment to roof by applying bitumenous primer @ 0.4 ltrs per Sqm over plastered surfaces of roof including parapet surface over the priming coat laying one layer APP based polymembric membrane of approved manufacturer 3mm thick, weight not less than 3 Kgs per Sqm reinforced with non woven polyester febric, weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a height of 60cm (min) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. Note :- (i) Laying APP bassed polymenic membrane shall be done by torch on methed or as per manufacturer's instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturer's instruction.
JAMWAL CONSTRUCTION CO
M/S KHAN ENTERPRISES
M/S Farooq Ahmed Bhat
M/S BHATT TRADERS
Modh Hafiz Khan
VIKAS ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .