SPL REPAIR TO BLDGS NO T-81D, P-26/1-4, P-33/1-4 AND PROVN OF HARD STANDING BLDGS NO T-46 AT AGE B/R-II BABINA UNDER GE BABINA CANTT

Amount

Demolition of PCC in any description and in any position etc complete all as specified and directed

Demolition of PCC/lime terracing of any description and in any position as in roof terracing complete all as specified and places where directed by Engineer-in-Charge/GE.

M&L plain cement concrete 1:2:4 type B0 using 12.5mm graded aggregate as in padding over roof finished and laid to required slop complete all as specified and directed by the Engineer -In-Charge at site.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and as directed.

M&L 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is green finished even and fair including mixing of water proofing compound as per manufacturer instruction complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid seperatly.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L applying water proofing treatment with the following :- (a) One coat of bitumen primer conforming to IS-3384 @ 0.4Kg / sqm (b) A layer of APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.

M&L for 75mm thick cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M&L PCC 1:2:4 type B1 using 20mm graded stone agg as in filling and mass concrete, Sub base/flooring complete all as specified and directed.

Taking down and Refixing in the same opening of door/window/cupboard wooden shutter of any description with or without not exceeding 1 Sqm each including easing and adjusting as required complete all as specified and as directed by Enineer-in-charge

All as per item No 10 above but exceeding 1 Sqm and not exceeding 2 Sqm

All as per item No 10 above but exceeding 2 Sqm each

S&F in repair of extruded Aluminum anodised handles 150 mm long, fabricated type, complete all as specified and directed.

S&F in repair of extruded Aluminum anodised handles 200 mm long, fabricated type, complete all as specified and directed.

S&F in repair of Aluminium anodised barrel tower bolts 150 mm long of extruded section, complete all as specified and directed.

S&F in repair of Aluminium anodised barrel tower bolts 200 mm long of extruded section, complete all as specified and directed.

S&F in repair of 16mm dia Aluminium anodised sliding door bolts with hasp and staple (bolt type) and fixing clips of sheets,cast or extruded type 300mm long, plate type, complete all as specified and directed.

S&F in repair of Aluminium anodised 100mm long hasp & staple type, incl bolt to hinge plate and fix with screws complete all as specified and directed.

S&F in repair of Aluminium anodised floor door stopper 140 mm with hard drawn steel spring long, complete all as specified and directed.

S&F in repair of Butt hinges, 75 mm size, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F in repair of Butt hinges, 100 mm size, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F 40 mm dia.,cup board knobs fixed with nut, screw and washer of brass, polished complete all as specified and as directed.

Taking down chowkhats or frames of any description n exc 1.5 sqm each (without taking off shutters from the frame) Note: Including cutting of hole as required at site for taking down and making good of distrubed portion with brick work of CM 1:6 or PCC 1:2:4 complete all as specified and as directed.

- ditto - but exc 1.5sqm and n exc 4sqm each - do -

Taking down shutters of any description n.exc 1 Sqm each etc complete all as specified and as directed

Taking down shutters of any description exc 1 sqm and n.exc 2 Sqm each complete all as specified and as directed.

Refixing of old door shutters in new chowkhats optained from taking down of shutters complete all as specified and as directed.

S&F 125 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4type B1 using 20 mm graded stone aggregate complete all as specified and as directed. Note :- 10 mm deformed bar shall be provided in bottom & PCC will be provided in hollow frame in same rate.

S&F 105 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4type B1 using 20 mm graded stone aggregate complete all as specified and as directed. Note :- 10 mm deformed bar shall be provided in bottom & PCC will be provided in hollow frame in same rate.

S&F for 30 mm thick locally fabricated flush door shutters solid core construction with block board core and ply wood face panels commercial type on both faces complete all as specified and as directed.

S&F 35 mm thick locally fabricated 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) fitted to chowkhats complete all as specified and as directed.

M&L Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing complete all as specified and as directed.

S&F for Factory made solid panel PVC door shutter 30mm thick prelam (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per manufacturer’s instructions Make : Rajshri /Black Cobra

S&F in repair steel windows z section with side hung shutters (02 Shutter for receiving glass & Jali in each window) including box type hinges with steel handle and steel peg stay, glazing bar,12mm dia MS bar 150mm c/c dovetailed or welded for receiving glass & Jali including taking out old unserviseable steel window complete all as specified and as directed.

S&F Steel ventilators with top hung shutter including hinges,steel peg stay, receiving glass & Jali complete complete all as specified and as directed.

S&F framed work such as grills, grating, etc, with ends of bars shouldered and or riveted, or froged in to spikes framed guard bars, barred iron doors, ladders, or similar work confirming to Fe 290 Gde-E-165 complete all as specified and as directed.

M&L for 2nd class hard wood for plain, solid, straight chowkats and frames for doors, wondows, ventilators etc. wrough, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints and fixed in position complete all as specified and as directed.

S&F in repair 18/19mm thick prelaminated particle board Exterior grade, prelaminated both face with decorative choice laminations one side and other side balancing white, fixed with screws to timber frame work including 2nd class hard wood beading on cutting exposed edges, polishing complete as in palmate boxes and kitchen cabinet and cupboard or in any type complete all as directed.

S&F continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30 mm complete all as specified and as directed.

M&L, for PCC 1:2:4 type B-1 using 20mm graded stone agg as in side of path/Hard Standing or on roof curbs on roof, champfered on edges including troweling slightly including necessary form work etc complete all as specified and directed.

Demolition of Brickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc complete all as specified and directed.

M&L for brick work with fly ash bricks (FASB) conferming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radious built cement mortar 1:6 complete (on parapet wall) all as specified and as directed.

M&L for brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.

Taking up or down existing 15 mm dia bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down existing 20 mm dia bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down existing 25 mm dia bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Supplying, fixing, jointing and testing 15 mm dia bore galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed.

Supplying, fixing, jointing and testing 20 mm dia bore galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed.

Supplying, fixing, jointing and testing 25 mm dia bore galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed.

Demolition of RCC water storage tank of size exc. 600x1200x1000 mm but n.exc 1200x1600x1500mm on roof, floor, staging complete and the scrap should be removing to distance of 50m where directed by EIC.

S&F 500 litre capacity of rotational moulded polyethylene water storage tank multilayered construction, ISI marked of make specified (cylindrical vertical with closed top) hoisted and fixed in position including S&F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified in SSR Part-I complete all as specified and as directed.

S & F 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and complete all as specified and as directed.

M&L, for PCC 1:2:4 type B-0 using 12.5 mm gradesd stone agg as in levelling course of floors of 25 mm thick complete all as specified and directed.

M&L for ceramic tiles 8 to 9 mm thick (square / rectangular) polished area of each tile exceeding 0.18 sqm but not exc 0.36 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc including 15 mm screed bed with CM(1:6) complete all as specified and as directed.

M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.0 6sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc and including 15 mm screed bed with CM(1:6) complete all as specified and as directed.

M&L for joint free glazed coloured tiles 300x600 x 7mm thick for work on vertical surface, set & jointed in cement slurry and pointed in white or coloured cement to match etc including 10 mm screed bed with CM(1:3) complete all as specified and as directed

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick in CM(1:6) etc complete all as specified and directed.

M&L 40mm thick Rough dressed stone slab flooring, laid dry but jointed & pointed in CM(1:3) complete all as specified and directed.

Taking down cement plaster on brick or stone wall including raking out joints, hocking for key scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of wall finish even and smooth finish without using extra cement on conc/brick surfaces in CM 1:6, complete all as specified and as directed

M&L for rendering 15mm thick on fair faces of wall even and smooth finish without using extra cement on conc/brick surfaces in CM 1:4, complete all as specified and as directed

M&L renderig 5mm thick in cement mortar 1:3 on ceiling surface and finished even and smooth with out using extra cment complete all as specified and as directed.

M&L for Preparation of new plastered surface of wall and applying two coat of OBD over a coat of alkali resistant primer over one coat of putty complet all as specified and as directed.

M&L for applying Two or more coats on new plastered surface of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over 1mm thick wall putty (for external suface) complete all as specified and directed.

M&L Preparing new plastered surfaces of Ceiling and applying three coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment from surface of wall of any description complete all as specified and as directed by the Engineer-in-Charge

M&L applying one coat of OBD over a coat of alkali resistant primer over one coat of putty on old surface of wall complet all as specified and as directed.

M&L for applying Two or more coats on old surface of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over 1mm thick wall putty (for external suface) complete all as specified and directed.

M&L for preparation of old painted surface fo brick, stone, concrete, asbestos sheet or plastered surface of any description over 10cm width or girth and applying one coat of Apex paint exterior grade, complete all as specified and as directed.

M&L preparing old decorated plastered or unplastered surfaces of wall, pilasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specified and as directed.

Description same as per item No. 71 above but on ceiling in lieu of walls complete all as spedified and as directed.

M&L PCC 1:3:6 type C-0 (using 12.5mm graded stone aggt) as in filling in holes of hold fasts and back filling of chowkats complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F 3mm thick, sheet glass, ordinary quality and glazing withoil putty in square in exc 0.5 sq.m in each pane etc complete all as specified and as directed.

M&L for preparation new wooden surface of any description not otherwise described over 10 cm width or girth and applying two coat synthetic enamel paint over one coat of pink primer etc complete all as specified and as directed.

M&L one coat synthetic enamel paint on old wooden surface incl prepartion of old surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed

M&L, preparing for new steel surfaces of any description and applying one coats of synthetic enamel paint over one coat of primer 10 cm width or girth complete all as specified and as directed.

M&L, preparing for old steel surfaces and applying one coats of synthetic enamel paint over 10 cm width or girth complete all as specified and as directed.

S&F in repair vitreous china squatting pan orissa pattern of size 580x440mm white with integral foot rest and including connection to trap and to flushing pipe, anti syphonage pipe etc. complete including making good to floor complete all as specified and directed.

S&F in repair 10 ltrs capacity PVC low level flushing cistern sleek plus single flush of colour star white Make :- Hindwar with inlet, float valve and handle with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed.

S&F in repair Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand and waste pipe complete all as specified and directed

S&F CP Brass soap dish fixed to wall with cp brass screws etc complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC connections 15mm size with PTMT nuts of length 600mm etc complete all as specified and as directed.

S&F brass CP wall mixer 15mm dia bore mixing hot & cold water with shower rose for screwed down for iron pipe and fixed for bathroom complete all as specified and directed.

S&F brass CP wash hand basin mixer/ Piller taps Mixer 15mm dia bore mixing hot & cold water for screwed down for iron pipe and fixed for WHB complete all as specified and directed.

S&F brass CP Sink mixer 15mm dia bore mixing hot & cold water with long body for screwed down for iron pipe and fixed for kitchen sink complete all as specified and directed.

S&F 15mm bore cast copper alloy chromium plated angle cock with flange complete all as specified and as directed.

S&F in repair of CP two way angle cock, 15 mm dia with wall flange, ISI Marked, complete all as specified and directed.

S&F in repair of CP two way bib cock & angle cock, 15 mm dia with wall flange, ISI Marked, complete all as specified and directed.

S&F 15mm bore cast copper alloy chromium plated two way angle cock with flange complete all as specified and as directed.

S&F 15mm bore fancy type chromium plated bib cock body with flange etc complete all as specified and as directed.

S&F in repair of CP health faucet with 8 mm dia, 1.5 mtr long flexible tube & wall hook, made of cast copper alloy, complete all as specified and directed.

S&F in repair PVC floor 125/110mm trap/Nahani trap PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed

S&F 600mm CP towel rail "D" type fixed to wall with CP brass screws complete all as specified and as directed.

S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union and fixed complete all as specified and directed.

S&F for wall mounted stainless steel Kitchen plate rack (utensils) over all size 750 x 900 X 250mm made with 0.63mm thick SS sheet including necessary stainless steel nuts and bolts complete all as specified and directed.

S&F stainless steel sink with drainage board 1.00mm thick for kitchen or laboretory with plug, waste pipe, coupling, washers also incl cantilever cast iron brackets connecting union etc, overall size 41" X 20" with bowl size 410x330x160mm complete all as specified and directed

S&F 25 mm dia chromium plated curtain rod with CP brackets and knobs at both end as per sample approved by Engineer-in-charge.

Taking down and breaking up PVC drain pipes set in cement mortar in floors or wall in 110/75mm dia meter complete all as specified and directed

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with clamp out of 25x3mm flate Iron including bolts and nuts 110mm bore complete all as specified and directed

S &F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed

S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed

S&F SS chromium plated peg set of Six fixing with wall complete all as specified and directed

Demolition and breaking drain pipe (salt glazed stoneware) set in cement mortar including packing under and haunching against side of pipe for 150 mm Internal dia of pipe complete all as specified and directed

Demolition and breaking drain pipe (salt glazed stoneware) set in cement mortar including packing under and haunching against side of pipe for 200 mm Internal dia of pipe complete all as specified and directed

M&L for concrete bed to drain pipes 150mm including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 complete all as specified and directed

M&L for concrete bed to drain pipes 200mm including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 complete all as specified and directed

M&L Salt glazed stone ware (SGSW) grade 'A' pipe 150mm bore laid and jointed on concrete bed complete including testing all as specified.

M&L Salt glazed stone ware (SGSW) grade 'A' pipe 200mm bore laid and jointed on concrete bed complete including testing all as specified.

Excavation in trenches for fdn n.exc 1.5m wide and n.exc 1.5m in depth & getting out in soft /loose soil complete all as specified and directed.

Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm complete all as specified and directed

Removing excavated at a level n.exc 50m m above the starting point complete all as specified and directed

Fixing only Stone slab 35 mm to 40 mm thick dressed true and square, in one length not less than 60cm and n. exc 120 cm in copings, window cills, chajjas, sunshades, etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edged rounded or chamfered as directed, set, jointed and pointed in CM(1:4) complete all as specified and directed

S&F of extruded Aluminum anodised handles 150 mm long, fabricated type, complete all as specified and directed.

S&F of Aluminium anodised barrel tower bolts 150 mm long of extruded section, complete all as specified and directed.

S&F of alumonium Butt hinges, 100 mm size, medium weight, cold rolled, complete all as specified and directed.

S&F 4mm thick sheet figured glass pin headed type, not exc 0.50 sqm in each pane, complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint on external wall surface over a coat of alkali resistant primer over one coat of putty complete all as specified and as directed.

M&L for complete removal of existing treatment from surface of wall all as specified and as directed by the Engineer-in-Charge

M&L applying two coat of OBD over a coat of alkali resistant primer over one coat of putty complet all as specified and as directed.

M&L for applying two coats of cement base paint on external wall surface over a coat of alkali resistant primer over one coat of putty complete all as specified and as directed.

S&F 1000 Ltr capacity 3 layered white colour rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600 mm long with fitting complete all as specified and as directed by the Engineer-In- Charge.

S&F 20mm Gun metal globe or gate vlve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repairs Vitreous chine wash down water closet pan (padestal pattern), white(EWC) including plastic seat of same colour of Wc, closed pattern with flat bottom, and cover mild steel chromium plated hinging device complete all as specified and directed

S&F in repairs Vitreous China Urinal, Half stall type, white with pvc connection , waste pipes and all accessorise complete all as specified.

S&F in repairs Urinal spreader of PTMT any white colour for fixing with 15 mm dia pipe (minimum weight 60 gms) complete all as specified

S&F Soap Dish holder Make Jaquar code No ACN-1131N complete as directed by Engr-in-Charge.

S&F Toilet roll paper holder with flap (Continental) Make Jaquar code No ACN-1153N complete as directed by Engr-in-Charge.

S&F in repairs floor Gratings complete as directed by Engr-in-Charge.

S & F in repair Vitreous China Ware counter Wash hand basin white color including cutting and fixing on granitre for and pinning ends of brackets or erecting stand and waste pipe. Make : Cera cat No S2030114 OR equivalent as mentioned in appendix B to Particular Specification.

S&F PVC (SWR) pipes single socketed, in any length with clamp out of 25x3mm flate Iron including bolts and nuts rubber ring joints, fixed to wall 75 mm bore complete all as specified and directed

S &F of 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed

S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed

M&L for construction of an up flow filter effluent treatment of septic tank 3.7m X 1.8m X 1.5 m of 100 users including excavation in hard/dense soil, foundation in PCC 1:2:4, fly brick work in CM(1:4), RCC slab in 1:1.5:3 complete all as specified, directed and shown on Drg No. CEBZ/TD/81/2011 Shett No.1/1. dt 1.08.2011

M&L for construction of soakage well, 1.8m dia x 1.5m deep including excavation in hard/dense soil, foundation in PCC 1:3:6, well honey combed fly ash brick wall masonry including RCC slab in 1:1.5:3 , filling brick bats complete all as specified, directed and shown on Drg No.CEBZ/TD/78/2011 Shett No.1/2 to 2/2

Material & Labour for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete ,sub base of floor etc complete all as specified and as directed.

Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid dry or laid dry & pointed

M&L for Glossy finish 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.complete all as specified and as directed.

Dismantling AC /CGI /PGI sheet roofing with ridge (corugated or semi corrugated) complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zink coating AZ-150 GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed self tapping screws as specified.

S&F Pre-painted galvalume aluminium zink coating AZ-150 GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed self tapping screws as specified.

Dismantling timber santling 40sqcm and above complete all as specified and as directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-290 Gde E-165 complete all as specified and as directed.

Dismantling of wall and celling board ( fiber, pulp, insulation, etc.) or insulated boards/slabs/blankets any thickness, including cover fillets complete all as specified and as directed.

S&F Powder coated galvanised MS grid frem work false ceiling of (main T size 32mmx24mmx0.45mm cross tee 24mmx24mmx0.35mm & wall angle size 19mm x 19mm x0.35mm with slot for fixing including suspended with 2mm dia GI wire hangers fixed with steel dash through fasteners from purline of the roof complete all as directed.

S&F 4 mm thick high pressure steam cured (HSPC) preprime non asbestos fiber cement designer board of size 600mm x 600mm /595mm x 595mm decorative finish as in ceiling complete all as specified and directed.

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in hard/dense soil complete all as specified and as directed.

M&L Preparing new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

Surface dressing n exc 15CM deep in soft/loose soil complete all as specified and directed.

Taking down carefully unserviceable aluminium point wiring (light, fan, socket or power) complete with fitting such as switches, ceiling roses, lamp holders, sockets, fan regulators, wooden terminal box plastic laminated sheet cover from TW battens including TW batten or drawing from existing conduit removing including TW batten all as specified and as directed by Engr-in-Charge.

Taking down carefully existing wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size any capacity from boards complete all as specified and as directed.

Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed.

M & L for concealed point wiring for one light point controlled by one switch complete with PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed .

Description same as per item No 158 above but one fan point controlled by one switch & regulator.

Description same as per item No 158 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

Description same as per item No 158 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

Description all as per item No 158 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

S&F switch piano flush button type 5 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and as directed.

S&F switch piano flush button type 15 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and as directed.

S&F ceiling rose,surface bakelite 63 x50mm three terminals complete all as specified and as directed.

S & F Sheet metal enclosure double door concealed suitable for distribution board when MCB to be used having 100 Amp rated bus bar SPNDB 8 ways 240 volts complete all as specified and as directed.

S&F MCB single pole and neutral 40 Amp/63 Amp 240 V ,10KA , 'C' series, connected with copper lugs complete all as specified and as directed.

S & F Sheet metal enclosure double door concealed suitable for distribution board when MCB to be used having 100 Amp rated bus bar SPNDB 4 ways 240 volts complete all as specified and as directed.

S & F delux Fan Regulator white electronic rotary, socket type 240 Volt 50 Hz complete all as specified as directed.

Supply and laying GI pipe 50mm bore "LIGHT GRADE" in trenches, under floors, roads, along poles for protection of cables, including sealing ends complete all as specified and as directed.

Supply and fixing in repair 20 W LED 6000k Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 28watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed by Engr-in- Charge.

S&F MCB single pole 6 to 32Amps 240 V,10KA, 'C' series, connected with copper lugs complete all as specified and as directed.

S&F TPN DB-DPX 125 MCCB DBs 4 way single door with provision for DPX 125 MCCB and as incomer and SP/TP MCBs as out going no of modules DPX 125+12, concealed Complete all as specified and as directed. Make:- ABB / Havells / HPL / Standard.

Supply and fix MCCB having breaking capacity of of 16 KA 415V, 4 pole having rating capacity of 100 Amp 100% ICU complete all as specified and as directed.

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed.

Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge.

S&F LED security/street light fittings1x35W LED 5700K energy saving and envoiremental frendly long life versatile pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 luminaire with high power LED as light siurce and electronic driver suitable for pole dia 35mm including 35mm dia light grade tube bracket, bend to shape 1.80m long with two numbers clamp of size 50mmx6mm with nuts, bolts, washers etc including connection with 1.5Sqmm two single core PVC insulated and PVC sheathed cable stranded copper conductor upto ceiling rose and fixing on wall /pole complete as ditrected by Engineer in Charge. Make: Bajaj Cat Part No BRLEP20WLEDWH or equivalent make as specified in Appendix B to particular specification.

S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings complete all as specified as directed

S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make C&S Cat No LTHPLEDLAMP7W/B22 or equivalent make as specified in Appndx 'B' to PS .

M&L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into conduit (Existing / new) including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code concealed on wall complete all as specified and as directed Note:- (a) Two runs of 6 sqmm cable and one run of 6 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) New conduit 25mm and conduit accossories shall be included and measured in one unit length of payment

Supply and laying or fixing or passing through HDPE pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel or strip and overall PVC sheathed, 16 sq mm 4 core ISI Marked as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc complete all as specified and directed.

S&F BLDC Ceiling fan complete with three aluminium blades down rod, snackel clamp, reel insulator, fan canopy split pin and accessories 230 V, 1200mm sweep with service value not less than 7.8, power consumption not more than 28 watt and minimum air delivery of 220 CMM, BEE 5 star rated, two core PVC insulated copper wire white sheathed of size 0.5 sqmm from fan connector to ceiling rose complete all as specified and directed. NOTE:-(I) Writing MES no in 20mm letter size with black paint etc is deemed to be included in quoted rate. (ii) Old fan deposit in store yard.

Supply and Fixing Exhaust fans AC single phase 230/240V of size 300 mm sweep, 1400 RPM with louvre complete including with all arrangement of making holes on wall, making good and finishing of disturbed surfaces matching with the existing surfaces, necessary fixing arrangement such as fastener bolts, nuts, washers etc, of appropriate size all as specified and as directed

Supply and fixing in repair LED mirror light batten type decorative ultra slim linear fixture with extruded aluminium heat sink envoiromental friendly energy efficient ready to use pack 1x10Watt, 2 feet, surface mounting type extruded PVC, snap on installers and domestic electronic driver, connector block etc with all accessories internally prewired and including connecting up with 2 core flexible copper conductor cable and mounting clamp complete all as specified and directed by Engr-in- Charge.

Supply and fixing in repair LED tube light batten type decorative ultra slim linear fixture with extruded aluminium heat sink envoiromental friendly energy efficient ready to use pack 1x20/22Watt, 6000k, 4 feet, surface mounting type extruded PVC, snap on installers and domestic electronic driver, connector block etc with all accessories internally prewired and including connecting up with 2 core flexible copper conductor cable and mounting clamp complete all as specified and directed by Engr-in- Charge.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.

M/S M S Constructions (BID ID -3291267)

M/s Pratham Enterprises (BID ID -3288108)

N K ENTERPRISES (BID ID -3291256)