Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹36.1 LAccepted-AOC MUMBAI THANE MAHARASHTRA | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹38.2 L+₹2.1 L (5.78%)Rejected-Finance F 8 7 SECTOR 5 CBD BELAPUR NAVI MUMBAI | L-2 | Rejected-Finance Being L-2 | |
| 3 | L-3₹38.8 L+₹2.7 L (7.39%)Rejected-Finance 214 2ND FLOOR SAMRUDDHI COMMERCIAL PREMISES CHINCHOLI BUNDER ROAD MINDSPACE MALAD WEST | L-3 | Rejected-Finance Being L-3 | |
| 4 | L-4₹42 L+₹5.9 L (16.4%)Rejected-Finance | L-4 | Rejected-Finance Being L-4 |
Tender Value
₹38.8 L
EMD Value
₹77,500
Closing Date
18 Sept 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SE(M), CED
CED,BARC,Trombay, Mumbai
Repairs to Disposal shed at TVS and miscellaneous works at other sea side buildings, North site, BARC, Trombay, Mumbai.
2023_BARC_768320_1
BARC/CED/ET/41/2023-2024 Dated 23.08.2023
Open Tender
Civil Works
Item Rate
365 days
TVS, Sea Side Buildings NS BARC Trombay
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹77,500
Yes
28 Nov 2023
24 Aug 2023
22 Sept 2023
28 Aug 2023
18 Sept 2023
28 Aug 2023
Amount
Dismantling roofing including ridges, valleys and gutter etc and stacking the material within 50 m lead G.S Sheet / FRP Sheet / AC Sheet.
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismantling and stacking within 100 m lead.
Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge.
Dismantling doors, windows and clear storey openings (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) Of area 3.00 Sq.M and below
Dismantling doors, windlows and clear storey windows (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) Of area beyond 3.00 Sq.M
Removing bitumen based water proofing treatment form terrace, chajjas etc. dosposing within 50 mtr .
Providing & applying Chemical based water proofing of Modified Acrylic Emulsion Polymer and Elastomeric waterproofing coating meeting technical parameter / specification over terrace slab/ parapet/ side walls etc. at all elevations including polycon based fibrous net all complete including cleaning and preparation of surface and testing by ponding water complete with following operations: 1. Removing of all loose materials by wire mesh and clean entire terrace with clean water by using water jet wherever required. 2. Opening all visible crack by plaster cutting machine in "V" shape, 3. Diluting binder with water in the Ratio of 1:4 and pour on the bare slab to be treated, 4. Apply binder and cement in the ratio of 1:1 and water to obtain paste like consistency and fill the cracks. 5. Applying bond coat of binder and cement in the ratio of 1:1 to entire terrace. 6. Apply first coat of binder & cement at the rate of 1.48 Sq.M per litre of Modified Acrylic Emulsion Polymer and Elastomeric waterproofing. 7. Laying of polycon based fibrous net (polyester geotextile of minimum 80 GSM) for entire area immediately before drying of first coat to get proper bonding. 8. Applying one more coat of binder & cement above fibrous net. 9. Applying 2 coats of Flexcoat-WP @ 2.40 Sq.M per litre with dilution 10% weight of potable water, 10.Test the surface for water tightness. PHYSICAL PROPERTIES: Appearance : Milky white emulsion, Solid content (150°c/ 20 min.) :47.0 ± 0.5%, pH : 8.0-10 Viscosity (Brookfield LVF#1/60 @ 25°c) : 160 cps Max., Film test (draw down 250-micron ambient temp.) : Clear, free from bits, Slightly tacky, Minimum Film Forming Temperature (MFFT): 10 degree centigrade to 12 degree centigrade, Specific gravity of emulsion (typical) : 1.025-1.035, Film casting test @54°c dried overnight on rolling : Flexible, should not crack Note : Tentative / suggested make for guidance of bidder(s) : M/s. Indofil - MC76 or equivalent
Providing and fixing precoated Galvalume profile sheet roofing of 0.50 mm Thickness in Single sheet of approved size, shape and pitch up to and including single length of 12.00 met. The sheet shall be fixed using self drilling / self tapping screws of size (5.5 X 55 mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as directed by the Engineer-incharge.
Providing and fixing precoated Galvalume roofing accessories using self drilling / self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete.
Roofing accessories of Galvalume sheet up to 600 mm total width for ridges, gutters, aprons,and flashings.
Supply and fixing at all heights, level & locations aluminium air driven turbo ventilator of 600mm dia with 2.00mm thick polycabonate dome sheet base plate with matching profile to galvalume sheet for side and end laps. The sheet shall be fixed with self drilling / self tapping screws or with polymer coated J or L hooks, bolts and nuts on purlin. The all end and side laps shall be sealed with PU sealent to make it complete leakproof etc. all as per direction of Engineer-in-charge.
Providing, supplying, cutting, welding, fabricating, hoisting and fixing in position structural steel members like trusses, purlins, posts etc. using MS hollow / circular / square / rectangular tubular sections including appling a coat of Zinc chromate primer of approved make all as per specifications, drawings and as directed by the Engineer in charge. 1. Structural steel confirming to IS 2062 shall be supplied. 2. Welding weights, connections, bolts and nuts shall not be measured for payment but the cost of which shall be deemed to have been included in the rates. 3. Welding Electrodes manufactured by M/s. Advani Oerlicon / ESAB India & D& H of specified suitable grade only shall be used. 4. Holes to be drilled only by Drilling machines and gas cutting of holes are not permitted. 5. Rate inclusive of all consumables like GAS, welding electrodes and tools and tackles etc.
Providing and Fixing 16 MM diameter 150 mm Long Anchor Fastner of approved make including drilling in concrete as per requirement for fixing Eps or other structures all as specified by the manufacturer complete all as per specifications and drawings.
Dismantling old plaster / skirting carefully , raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100 m lead.
Providing structural repairs in old damaged concrete structures / surfaces with approved Polymer with following operations 1) Removal of loose/Spalled or damaged concrete by chipping and cleaning the concrete surface and reinforcement steel with wire brush and with water 2) Cleaning the re bars with Acetone for complete rust removal and washing with water to make the surface clean. 3) Applying protective coat / bond coat using polymer and cement in the proportion of 1:1.5 (1 part of polymer and 1.5 parts of cement in synthetic enamal paint like consistancy with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the proportion of Cement 50 Kg : washed and dried river sand 87.50 kg : silica sand 37.50 Kg. mixed with 10 litres of Polymer (or 1 Kg cement : 1.75 kg washed and dried river sand : 0.75 Kg silica sand : 200 ml polymer) 5) If thickness of repair exceeds 20mm , after every 20 mm thick repair, bond coat as per 2 above to be applied and further thick of repair to be continued for each layer. This work is inclusive of all materials, labour, complete all as directed at site using approved polymer suitable for structural repair shall be used) Note: Scaffolding will be paid separately under relevant item
Providing and fixing double tubular scaffolding system using H frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding. Note: The mobile scaffolding will be supplied by the department free of cost for truss painting or any other work at the discretion of EIC. The contractor has to make his own arrangement for transportation to & fro and fix the mobile scaffolding at the desired location as directed by EIC. After completion of work, the mobile scffolding shall be returned in good condition to the departmental store. For the portion of work where the mobile scaffolding is supplied free, no additional payment to the contractor shall be made under the above item.
Providing and fixing G.I. chicken mesh in the junctions of concrete & brick work / masonry or as directed by the Engineer in charge including cutting, fixing with nails in position before plastering complete all as directed by the Engineer-in-charge. (Note : Only area of the chicken mesh used alone will be measured)
Providing and constructing Brickwork in cement mortar 1:4 using crushed sand with Flyash/ Flyash Lime bricks with minimum 70 kg/ sq.cm strength of approved make and size in super structure up to and including Floor II Level including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings.
Providing 20 mm thick water proof plastering in cement mortar 1:4 (using crushed sand) finsihed smooth with a floating coat of neat cement including approved water proofing compound added @ 2% by weight of cement or as per manufacturer's specifications, sieving of sand to required fineness, preparation of surface, scaffolding at all heights, curing all as per specifications, drawings and as directed by the Engineer-in-charge
Providing 15 mm thick Internal plaster in cement mortar 1:4 without cement punning (using Crushed Sand) finished smooth, including sieving of sand to required fineness, preparation of the surface, scaffolding, curing all as per specifications, drawings and as directed at site complete.
Lead charges for Debris Beyond 4 Km but up to and including 5 km by mechanical transport includinmg loading,unloading, stacking / levelling etc. Note: The rates in respect of Item are applicable for NET Quantities arrived at after making deduction for voids @ 30% from corresponding TRUCK Measurement
Providing and Painting two coats of synthetic enamel paint on steel surfaces to give an even shade over a primer coat including preparation of the surfaces, scaffolding complete as per specifications and as directed by the Engineer-in-charge.
Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (Note : fittings glazing and panelling shall be paid for separately) Notes : 1) The rates for aluminium is inclusive of all fastners required for fabrication and fixing in the walls. 2) All joints shall be of mittered Joints 3) A long M.S rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 4) Only Aluminium members alone shall be measured and paid for.
Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)
Extra for colour anodizing
Providing and fixing With clear float glass panes of 4.0 mm thickness glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge. Note : Cost of snap beading shall be paid in basic item.
Providng and fixing Aluminium Grill 10 mm thick in natural Silver anodising of min 15 Microns with a opening size of 60mm x 45mm and Minimum weight of 4.12 Kg/ Sq.M including providing anfd fixing Suitable 'F' / 'H' section outer frame and mullion fixing with screws complete all as per specifications and as directed at site by the Engineer-in-charge. Aluminium alloy shall be of 6063-T6 with yield strength of minimum 6.5 kg/ sq.mm. Note : Tentative / suggested make for guidance of bidder(s) : M/s. "DECO GRILLE" make Model No. DG- 202 or equivalent make
Extra over for providing Aluminium Grill 10 mm thick with colour anodised by the manufacturer (Champagne, black, Bronze, Gold colours) complete all as per specifications and as directed at site by the Engineer-in-charge.
Providing, supplying and fixing hollow metal flush steel doors 40 mm thick of approved make consisting of door frame and shutters and all hardware fittings, frame made out of 14g thick G.I sheets and shutters made of 16g thick sheets, hollow portion filled with puff, including necessary stiffners in shutters and frame, vision panel of specified size with 4 mm glass and clip on pressed steel frame for vision panels, fixing 4 nos heavy duty stainless steel 304 grade ball bearing hinges, mortise / dead lock of approved make and aldrop for padlock, a pair of 200 mm long stainless steel handles, 250 mm long stailless steel tower bolt, etc. frame hollow portion filled with PCC 1:2:4, necessary hold fast embedded in concrete, fixing in concrete with anchor fastners. finished with Polyurethane painting of approved colour complete all as per drawings and specifications and as directed by the Engineer-in-charge
Providing, painting and finishing walls with two coats of exterior emulusion paint of approved make on sand face plaster/ plain plaster / concrete surfaces / rough cast plaster surfaces of required shade including base coat of water proofing cement paint, preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge.
On sand face plaster/ plain plaster / concrete surfaces
On rough cast Plaster surfaces
Providing and painting with two coats with oil bound distemper of approved make and manufacturer to give an even approved shade and including priming coat with one coat of cement primer including preparation of sufaces, filling with putty if required, scaffolding complete as per specifications and as directed by the Engineer-in-charge.
ORIENTAL INTEGRATED FACILITY MANAGEMENT PVT. LTD.
PALLAVI CONSTRUCTION
ELEGENT ENTERPRISES
stage.html
html • 0.05 MB
techsummary_807674.pdf
PDF • 0.22 MB
BOQ Comparative Chart
xlsx • 0.01 MB
finsummary_807674.pdf
PDF • 0.35 MB
WOET41KunalConstruction.pdf
PDF • 5.80 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .