Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.6 LAccepted-AOC | ₹34.6 L Quoted ₹35.0 L | L1 | Accepted-AOC Being lowest and reasonable |
| 2 | L2₹36.0 L+₹1.0 L (2.90%)Rejected-Finance NO 306 SCION AVENUE 4TH A CROSS KAGGADASPURA NEAR GANAPATHI TEMPLE BANGALORE 560093 | BANGALORE | BENGALURU URBAN | KARNATAKA | 560093 | ₹36.0 L+₹1.0 L (2.90%) | L2 | Rejected-Finance Not being lowest |
| 3 | L3₹36.0 L+₹1.0 L (3.00%)Rejected-Finance NO 45 5TH CROSS MALLAPPA LAYOUT BABUSAPALYA KALYAN NAGAR BANGALORE 560043 | BENGALURU URBAN | KARNATAKA | 560043 | ₹36.0 L+₹1.0 L (3.00%) | L3 | Rejected-Finance Not being lowest |
| 4 | L4₹37.0 L+₹2.1 L (5.89%)Rejected-Finance | ₹37.0 L+₹2.1 L (5.89%) | L4 | Rejected-Finance Not being lowest |
| 5 | L5₹37.8 L+₹2.8 L (8.12%)Rejected-Finance | ₹37.8 L+₹2.8 L (8.12%) | L5 | Rejected-Finance Not being lowest |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
18 Dec 2023, 6:00 pmClosed
GARRISON ENGINEER I R nd D WEST BANGALORE
GARRISON ENGINEER I R nd D WEST BANGALORE, DRDO COMPLEX, CV RAMAN NAGAR
REPAIR REPLACEMENT OF MANHOLES CI MANHOLE COVER CLEANING OF CHOCKED SEWER LINE SEWAGE LINES AND CERTAIN MISC REPAIR WORKS TO TYPE A B C J N KV SCHOOL KG SCHOOL AND DAD HOSTEL MARRIED ACCN OF ZONE I AREA OF DRDO TOWNSHIP PHASE I CV RAMAN NAGAR BA
2023_MES_625319_1
GE(I)/R ND D/BAN/TOKEN/79 OF 2023-24 8232/E8
Open Tender
Civil Works
Item Rate
270 days
GARRISON ENGINEER I R nd D WEST BANGALORE
CLASS AND CATEGORY AS PER NIT
9 documents required · 9 mandatory
₹500
GARRISON ENGINEER I R nd D WEST BANGALORE
₹94,000
13 Jan 2024
25 Nov 2023
23 Dec 2023
26 Nov 2023
18 Dec 2023
11 Dec 2023
26 Nov 2023 - 10 Dec 2023
Amount
M&L for excavation in trenches n.exc 1.5m wide and not exc 1.5 m in depth and gettig out in any type of soil complete all as specified.
M&L for excavation in trenches exc 1.5m wide and not exc 3.00 m in depth and gettig out in any type of soil complete all as specified,
Demolition of PCC of any description & in any position not otherwise specifically provided for (unreinforced) complete all as specified.
M&L for PCC 1:4:8 type D2 as in foundation filling and mass for Manhole , Drainage concrete etc complete all as specified.
M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in benching, drain and surface channel and the like, rounded or chamfered on edges including necessary formwork, etc complete all as specified and as directed by the Engineer-in-Charge.
M&L plain cement concrete 1:2:4 type B0 (using 12.5mm graded aggregate) as in coping/ bed plate/ bed block including necessary forms and moulds.
Demolition of brick work or stone/ PCC block masonry, built in cement mortar etc and removing debris outside MD Land complete all as specified.
Precast cement concrete block masonry with solid blocks exceeding 10 cm in width, in PCC 1:3:6 mix, type C1, (Using 20 mm graded stone aggregate) and setting in cement mortar 1:4 complete all as specified and as directed.
M&L for brick work with subclass 'B' bricks straight or curved on plan exc 6 mtr mean radius built in cm 1:4 all as in manhole etc.
Demolition of cover slab of any description & in any position complete all as specified.
M&L for TMT bars 10mm dia and above but to length bent to shape required inclding cranking bending etc and binding with mild steel wire (annealed) not less then 0.90mm complete.
M &L TMT bars 6 mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending and binding with and including mild steel wire (annealed) not less than 9 mm dia complete all as specified and directed.
M&L Precast RCC 1:2:4 type B1 using 20mm stone aggregate as in cover slab of manhole, gully trap, drain etc. set in CM 1:4 all as specified and as directed.
Demolition and breaking up 150mm / 160mm bore drain /sewage pipes set in cement mortar (salt glazed stoneware/asbestos cement/reinforced/UPVC) including bed concrete and removal of debris outside MD land, of the following sizes complete :
Demolition and breaking up 200mm bore drain /sewage pipes set in cement mortar (salt glazed stoneware/asbestos cement/reinforced/UPVC) including bed concrete and removal of debris outside MD land, of the following sizes complete :
Demolition and breaking up 300mm bore drain /sewage pipes set in cement mortar (salt glazed stoneware/asbestos cement/reinforced/UPVC) including bed concrete and removal of debris outside MD land, of the following sizes complete :
M&L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in PCC 1:4:8 type D2 for 150/160mm dia pipe complete all as specified.
M&L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in PCC 1:4:8 type D2 for 200mm dia pipe complete all as specified.
M&L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in PCC 1:4:8 type D2 for 300mm dia pipe complete all as specified.
M&L UPVC pipes of 150/160mm internal dia, foam core, self fit 0.4 Mpa (class-2) pressure 4.00 Kg/CM2 laid under trenches jointed in CM (1:1) complete all as specified and as directed.
M&L for 300mm bore double wall corrugated HDPE pippe (DWC HDPE) of iffness class designation SN 8 (cofirming to I.S. 16098 Part-2: 2013) (Spigot and socket ended pipe) at sie cofirming to relavant I.S and CPHEEO Specification jointing with rubber gasket, alongwith all necessary fittings for jointing the pipe complete all as speified and as directed.
M&L UPVC pipes of 200mm internal dia, foam core, self fit 0.4 Mpa (class-2) pressure 4.00 Kg/CM2 laid under trenches jointed in CM (1:1) complete all as specified and as directed.
Cutting into existing manholes for connecting new drains ,making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished,and reforming benching as required for 160mm bore pipe.
Cutting into existing manholes for connecting new drains ,making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished,and reforming benching as required for 200mm bore pipe.
Taking down cement plastering of any thickness on brick, concrete or stone walls, partitions, ceilings etc including raking out joints, hacking for key, scrubbing down with water etc, and rmoving debris outside MD land complete all as specified and as directed.
M&L for 15mm thick rendering on brick or concrete surface of manholes, drain and septic tank/soakage well in cement mortar 1:4 and finishing the surface with using water proof compound even and smooth without using extra cement all as specified and as directed. Note: Water proofing compound shall be measured and paid seperately
Supply only water proofing compound liquied all as specified
M&L for returning, filling in including spreading, levelling, watering and well ramming in layers n exc 25cm complete.
Removel of excavated soil not exc 50mtr and depositing where directed at a level 1.5M above the starting point.
Demolition of cement concrete in ground floor and paving n exc 15cm below or above ground level complete all as specified.
Removing demolished concrete materials etc. to a distance of 100m or under, beyond the lead included in the rates, including loading, unloading and tacking at the destination exc 5.0 km total distance up to10KM complete all as specified and as directed.
Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar and removing debris outside MD land omplete all as specified.
M&L 75mm thick PCC type C-1, (1:3:6) using 20mm graded stone aggregate as in path/Hardstandiing,Plinth protection finished surfaces even and fair Incling construction Joints complete all as specifiedand as directed.
M&L 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in sub base of paving/plinth, Hard standing protection.
S&F Chequered cement concrete commercial Tiles30cm x 30cm x 20 to 22mm /30cmx30cmx20 to 25mm thick of with grey cement and pigment set jointed and pointed in neat cement slurry in floors and cut and polished laid ande over and including 15mm Screed in CM 1:6 including all as specified and as directed.
Cleaning of blocked sewage line of any dia by rodding from one manhole to next manhole and washing through in fresh water including removing all sludge, tree roots from the sewage lines and disposed off properly outside the MD land complete all as directed.
Cleaning of manhole of any description & size and exceeding 1.5 M in depth including lifting up and removing sludge & accumulated solid/semi solid sludge and any other foreign material with mechanically & washing down with water for smooth functioning of sewage line all as directed, sludge obtained from cleaning shall be removed outside MD land complete all as directed
All as item No.36 above but depth exc 1.50M but not exc 3.00M
Removing of blockage from kitchen/ bathroom/WHB by using rubber cup and clearing the blockage upto nearest gully trap / manhole with cleaning rod including disposing off waste material outside MD land obtained complete all as directed to entire satisfaction of Engineer-in-charge
Cleaning of blockage WC (E type) or I (type) by opening inspection door bend and using roding/pressure technique to clear blockage complete all s specified and as directed.
Demolition of floor , hearth or wall tiling including cement mortar bedding ( incl backing ), removing serviceable tiles to store and rubbish off the premises.
M&L 25 mm thick PCC 1 : 2 : 4 type B0 (using 12.50 mm graded stone aggregate) as floor rough and even to received tile screed bed/bedding layer complete all as specified and directed
M&L non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specfied and directed.
S&F for Vitreous china White Squatting Orissa Pattern pan of size 580x440mm, including UPVC ‘P’ or ‘S’ trap, front or back inlet and integral foot rests and making connection to trap and to flushing pipe, anti syphonic pipe, fixed in repair including dismantling existing squatting pan and making good to disturbed floor, complete all as specified and directed.
S&F Vitreous china white wash down water closet pan (pedestal pattern) with PP soft closing seat cover, hinges, fixing accessories set (excluding flushing cistern and flush pipe), including UPVC (SWR) ‘P’ or ‘S’ trap and connection to drain (or outgoing pipe) and to flush pipe, antisyphonic pipe fixed in repair including dismantling existing water closet etc complete all as specified and directed by GE” Make : Cat part No CNS-WHT-553SS of Jaquar or techno-commercial equivalent model in other makes as approved by GE”
S&F in repair of cuddappa stone /factory made cover slab on gully traps by adjusting the size of hole or vent pipes to avoid entering of snakes, rats etc as directed by Engineer in Charge
M&L in repair PVC (SWR) gully traps 125/110mm setting and jointing with solvent cement
S & F (SWR) PVC pipes 110 mm dia single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil waste/vent pipes including taking up or down existing PVC pipes, connections & provn of scffolding up to (G+3) complete all as specified and as directed.
S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in laid under floor or on walls fixed as soil waste/vent pipes including taking up or down existing PVC pipes and connections complete all as specified and as directed..
M&L 75mm dia PVC (SWR) floor trap, plain with grating including,removing of existing floor trap, jointing with solvent cement complete all as specified and directed.
S&F 75mm PVC(SWR) multifloor trap with grating including jointing with solvent cement
S & F 75 mm bore PVC (SWR) bends of any radius with access door.
S & F 110 mm bore PVC (SWR) bends of any radius with access door.
S&F 75mm dia branch piece single (Single Y) equal or unequal
S & F 110 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal.
S&F PVC (SWR) vent cowl 110mm dia
M&L for 20mm thick Granite work (of any type) (table rubbed and premirror polished) in pillar for gates, single piece in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in cement white (1:2) using marble dust with admixture of pigment to match the shade of granite, including making hole for gas pipe including half rounding the edges of granite, laid over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L 15 mm thick rendering in CM 1 : 3 on fair faces of brick work or concrete surfaces finished fair and even mixed with water proofing compound complete all as specified and directed Note : Water proofing will be measured and paid separately.
M&L applying 1mm thick BRUSHBOND RFX GREY or equivalent using stiff brush or trowel to the plastered surface in sunken floor complete all as specified and as directed.
M&L for PCC 1 : 5 : 10 type E2 (using 40 mm graded stone aggregate) 75 mm thick, in as in sub base of the sunken floors complete all as specified and directed.
Cleaning of blockage gully trap to first manhole by roding/pressure complete all as specified and as directedfloor trap of 75mm dia all as specified
Dismantling wrought iron or old mild steel work of any description not otherwise provided for complete all as specified and as directed.
S&F in repairs for Framed work such as grills, structural steel, gratings and similar work etc., with ends of bars shouldered and/or riveted, or forged into spikes; ; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165
M & L for painting of old steel surfaces of any description not otherwise described over 10 cm width or grith with two coats of synthetic enamel paint including preparation of surfaces and on coat of primer etc complete all as specified and as directed.
M&L two coats of synthetic enamel paint on new steel surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and as directed..
S&F M-35 Grade Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, all as specified and as directed.
Providing and fixing in repairs for position circular shape up to 560 mm internal dia pre-cast R.C.C. EHD - 35 manhole cover and frame of required shape and approved quality complete all as specified and as directed.
Supplying and fixing in repairs for any size of rectangular/ Circular C.I. cover with frame for manholes to be not less than 23 kg complete all as specified and as directed.
SCION ENTERPRISES
M/S Suresh Raju
Solar Electricals and Electronics
K R Koteswara Rao
MAA ENGINEERING SERVICERS
SM CONSTRUCTIONS
MAYDINI CONSTRUCTION CO
Ravees Enterprises
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .