ADDITION / ALTERATION/ IMPROVEMENT TO CERTAIN HOSPITAL BUILDING UNDER GE (AF) HASIMARA.

Amount

Note 1:- (Applicable for all parts/items) : The biidders/contractors are advised to read tender documents & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, man-holes, pier holes, etc. n exc 10 sq m on plan & n exc 1.5m in depth & getting out in soft/loose soil complete all as specified and as directed.

M&L for Cement Concrete1:4:8 Type D-2(using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

Demolition of old brick work built in cement mortar including all quoins arches,pillars etc complete and removing debris from site of work all as directed.

Dismantling old wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L for cutting out bricks, forming toothing for, and bonding new into old work including value of new materials entering old walls and jointing and pointing in 1:4 cement mortar (measured on vertical face in contact with old wall only) complete all as specified and as directed.

M&L for Old size brick work with sub class 'B' bricks straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick wall including provision of 02 Nos 8mm TMT bars at every fourth course complete all as specified and as directed.

M&L Old size Brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified and as directed.

M&L broken stone or boulder hardcore of gauge n.exc 63 mm deposited spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering & well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed.

M&L for 75 mm thick PCC (1:4:8) type D-2 (using 40mm graded stone agg.) as in sub base of floor complete all as specified and as directed.

Taking down old cement plaster on brick or concrete surfaces incl racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L 15 mm thick rendering in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound on top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

M&L for 5mm thick rendering in cement mortar 1:3 on fair faces of brick work or concrete surfaces, rendering finished even and smooth (without using cement) as in ceiling complete all as specified and as directed.

Supply only liquid Integral water proofing compound approvend brand as per IS.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) o f foundation and plinth beams; and similar work; vertical or to batter for flat rough finished surface of concrete complete all as specified and as directed.

Use and waste of Formwork for rough finished flat surface of concrete surface to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

Use and waste of Formwork for rough finished flat surface of concrete surface to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed.

Use and waste of formwork for rough finished flat surface of concrete surface to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over grade Fe-500D, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for mild steel TMT bars 6mm to 8mm dia grade Fe-500D, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for RCC M-25 (Design Mix) (using 20mm graded crushed stone aggregate) as in chajjas complete all as specified and directed. [Note: Reinforcement and formwork shall be measured and paid separately under relevent item.]

M&L for RCC M-25 (Design Mix) (using 20mm graded crushed stone aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. [Note: Reinforcement and form work shall be measured and paid separately under relevent item.]

M&L for RCC M-25 (Design Mix) (using 20mm graded crushed stone aggregate) Columns, pillars, piers, posts and struts complete all as specified and directed. [Note: Reinforcement and form work shall be measured and paid separately under relevent item.]

Demolition of old reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work ( table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

S&F of 10 mm thickness of PVC insulation panel with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre and dismantling of existing false ceiling with wooden/MS/GI frame work complete as specified and directed.

M&L for gypsum cornice of width 150mm with designer type and fixed along to wall as in perimeter of room complete all as specified and directed.

S&F of 07 to 08mm thickness of PVC insulation panel with EPS stuck to 1mm plain PVC sheet inclusive of solvent cement and fixing at site on frame with fillets as per specifications and drawing complete all as specified and as directed.

S&F pre painted galvainiume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws all as specified and directed.

S&F pre painted galvainium aluminium zink coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws all as specified and directed

S&F for mild steel framed work such as grills, gratings etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, frammed balusters, walk ways, railings, frame work of water tanks and similar works conforming to FE-290, Gde-E-165 complete all as specified and as directed.

S&F for mild steel rolled mild plates (plain or chequered)channels, square cut or notched, forming holes with riveted, bolted or welded attachment conforming to Fe 290 Gde E-165 complete all as specified and as directed.

S&F for MS steel work in tubular trusses and tubular posts including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to I.S.I 1161-1998 Grade St-240 with one shop coat of zinc chromate primer paint complete all as specified and as directed.

M&L for MS screw bolt diameter of shank 11 to 15mm (machine made) with hexoganal head at one end screwed the other or screwed both ends each screw end fitted with washers and one hexagonal nut, n.exe 05cm complete all as specified and as directed.

S&F for mild steel bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410W Gde E-1250 quality A complete all as specified and as directed.

S&F for steel wire fabric of weight n exc 4 kg/Sqm complete to wood or steel members complete all as specified and as directed.

Dismantling of floor, hearth or wall tiles including cement mortar bedding ( but not backing) and remvoing rubbish off the premishes all as per specified and directed.

M&L for Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15 mm thick screed bed in cement mortar (1:6) all as per specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 350x250x7mm/450x350x7mm thick as in skirting or dado on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick cement plaster as in backing of tiles in cement mortar (1:4) complete all as specified and directed.

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15 mm thick screed bed in cement mortar (1:6) all as per specified and directed.

M&L vitrified heavy duty full body digital paving tile 10 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed (1:6) Complete all as specified and as directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness, (Below or above ground level) and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M complete all as specified and as directed.

M&L Plain cement concrete 40mm thick type B-0, 1:2:4 (using 12.5mm graded stone aggregate) in alternate bays and finished the surface even and smooth using extra cement including necessari demolition of cement concrete (unreinforced) in ground floor (Glass stirps measured and paid separately) complete all as specified and as directed.

M&L Glass deviding strips, 3mm thick inserted in position, conform to design of 38mm wide complete all as specified and as directed.

M&L for 75mm thick cement concrete 1:3:6 type C-1( using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified complete all as specified and as directed.

M&L for Chequred cement concrete tiles of size 30 cm x 30cm x 25 mm thick set jointed & pointed with grey cement and pigment in neat cement slurry over and including 20mm thick creed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for PCC 1:2;4 type B2 (using 40 mm graded stone aggregate) as in surface channel and drain all as specified including necessary formwork all as specified and as directed .

M&L for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds mitered/stopped ends etc. complete all as specified and as directed. .

Taking down old chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as specified and as directed.

Taking down old chowkat with shutter without taking off shutter from the frame exc 1.5 Sqm n.exc 4 Sqm each complete all as specified and as directed.

Taking down old shutter of any description exc 1 & n.exc 2 Sqm each complete all as specified and as directed.

Resecuring or easing & adjusting without taking down of shutter of any description exc 1 & n.exc 2 Sqm complete all as specified and as directed.

S&F for powder coated Anodised aluminium frame for doors, windows / ventilators and partitions etc., with one or more rebates including joining cleat for fixing etc., complete all as specified and directed.

S&F for powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F in repair of Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or fixed with tinned tracks incl wooden beads complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins / spring clips and providing new pins / spring clips complete all as specified and directed.

S&F for 10 mm thickness Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and as directed.

S&F in repair double action floor spring hydraulically regulated made up of minium 1.25mm thick aluminium alloy sheet foundation box , main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

S&F for 5 mm thick ACP sheet in panels of Aluminium door exc.0.5 Sqm in each pane with rubber beading complete all as required and directed.

S&F for aluminium mortice lock with 4 levers vertical types size 75mm complete all as specified and as directed.

S&F for sheet glass, ordinary quality, 5.5mm thick in squares n exc 0.5 sq. m each pane solar control film 25 micron reflective type (gareware sun control or equivalent) complete all as specified and as directed.

S&F for 5.5 mm thick, frosted glass and glazing with neoprine rubber beading for aluminium door/windows exc 0.5sqm in each pane complete all as specified and as directed.

S&F for door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width of aluminium (Die cast) body complete all as specified and as directed.

S&F in repairs of floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified and as directed.

M&L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment over sand cushion all as specified and as directed .

M&L for sand cushion under interlocking tiles complete all as specified and as directed.

S&F for 18mm thick prelim wooden finished PVC piastic ply for self cupboard etc including all required accessory and builder hardware, as per direction.

S&F extra over rates of block board or veneered particle board (18/19 mm thick board) for external teak wood lipping, 6mm thick fixed with nails complete all as specified and as directed.

S&F in repair Ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and as directed.

S&F in repair Brass knobs 35-40mm dia complete all as specified and as directed.

S&F for continuous piano hinges bright finish or electrogalvanised 30 mm width of flaps (when open) complete all as specified and as directed.

M&L for conceled hinge with integrated dampening/ soft close system including all fixing arrangements for copboard doors complete all as specified and as directed.

Taking down old 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work complete all as specified and as directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.( Note :- The rate includes all plain CPVC fittings mean fittings which do not have any metal component ( Elbow, Tee, Socket, Reducer, Bushing, Step over bends, End cap, End Plugs etc) and pipe cutting fixing with CPVC solvent cement and testing.The seprate rate for special fittings [CPVC Brass fittings (Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor etc), Unions, Ball valves, Flange and tank adaptor] complete all as specified and as directed.

S&F for CPVC 20 mm dia of Brass Elbow complete all as specified and as directed.

S&F for CPVC 20 mm dia Brass Elbow (3/4 X ½) complete all as specified and as directed.

S&F for CPVC 20 mm dia Brass Tee complete all as specified and as directed.

S&F for CPVC 20 mm dia Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and as directed.

S&F for CPVC 20 mm dia Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and as directed.

S&F for CPVC 20 mm dia Tank Adaptor complete all as specified and as directed.

S&F for CPVC 20 mm dia UNION complete all as specified and as directed.

S&F for CPVC 20 mm dia BALL VALVE complete all as specified and as directed.

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth of brick wall complete all as specified and as directed.

S&F in repairs 15mm bore fancy type, chromium plated, stop valves,concealed type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union complete all as specified and as directed.

S&F in repairs vitreous china squatting pan ,"Orissa pattern" white, size 580x 440 mm with integral foot rest, 'P' or 'S' trap, including connection to trap, and to flushing pipe, CI anti -syphonage pipe complete all as specified and as directed.

S&F for PVC connection 15 mm size with PTMT Nuts of length 600 mm complete all as specified and as directed.

S&F for PVC waste pipe for urinal/ WHB 32 mm bore with one end with socket complete all as specified and as directed.

S&F for vitreous china WHB white flat black size 580 x 450mm excluding pillar tap, but including 32mm dia waste pipe with CP waste coupling bracket etc in repair complete all as specified and as directed.(Make: Cera, Hindware, Peryware) .

S&F in repair CP pillar tap 15 mm bore with capstan head, screwed down high pressure with or without lettered “hot’ or “ cold” with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.

S&F in repairs, 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed.

S&F in repairs of 15mm bore bib taps, cast copper alloy with chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs angular stop cock 15mm bore chromium plated in repair complete all as specified and as directed.

S&F in repairs Brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F in repairs Swivel shower rose of brass chromium plated 125 mm size with long head arm for fixing with 15 mm pipe complete all as specified and as directed.

S&F in repairs of Central hole basin mixer chromium plated fancy type complete all as specified and as directed.

S&F for Sheet Glass Shelf Assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

S&F in repairs vitreous china EWC (padestal pattern) white 'P' or 'S' trap and including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc complete all as specified and as directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F for CP grating 100mm dia with or without waste hole, fixed to floor trap in repair complete all as specified and as directed.

M&L for applying one coat of white washing on old decorated surfaces of wall including preparation of surfaces by scrubbing down with steel wire brushing scrapping down smoke soot, moulds moss and fluorescent salts and trading oil and greasing spots all as specified and as directed

All as per srl item No 2.07 here in before but ceiling, soffits of slabs, chajj etc complete all as specified and as directed.

M&L applying one coat of oil bound distemper to old decorated surfaces of wall including preparation of surfaces complete all as specified and as directed.

Complete removal of existing treatment of any type from walls complete all as specified and as directed.

M&L for applying one coat of putty on walls to obtain a smooth surface including making good any undulations on the surfaces complete all as directed .

M&L for preparing newly plastered surfaces of internal walls, etc and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint (1st grade quality) to old decorated wooden surfaces of girth exc 10cm width or girth incl preparation of surfaces complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint (1st grade quality)over a coat of read oxide primer after preparation of new steel surface, over 10cm in width or girth,not otherwise described complete all as specified and as directed.

M&L applying one coat of synthetic enamel paint (1st grade quality) to old decorated steel surfaces of girth exc 10cm including preparation of surfaces complete all as specified and as directed.

M&L applying three coat of white washing on ceiling surfaces including preparation of new surfaces complete all as specified and as directed.

M&L applying three coat of white washing on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for applying two coats of cement base paint over a coat of Alkali resistant primer to new plastered surfaces of wall including preparation of surface complete all as specified and as directed.

M&L for preparing old decorated surface of wall/chajja by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and applying one coat of cement base paint on surface of wall/chajja complete all as specified and as directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over Complete removal of existing treatment of old surface of wall complete all as specified and as directed.

M&L for applying one coat of Aluminium paint on old steel surfaces of any description over 10 cm width girth after complete removal of existing treatment incl preparation of surfaces complete all as specified and as directed.

M&L for preparation of new surfaces of walls, of any description over 10cm width or girth and application of two coat of plastic emulsion paint over one coat of chalk whiting priming complete all as specified and directed.

M&L for preparation of old surfaces of walls, of any description over 10cm width or girth and application of one coat of plastic emulsion paint complete all as specified and as directed.

S&F of bold SS 3d letter or alphabet made out of 22 gauge thick 304 grade SS plain sheet (hollow section made to any shape),the height of letter / alphabet shall not be less than 250 mm in hindi /english language of readble format fixed to Granite Pillar/wall complete all as specified and as directed.

S&F High intensity reflective single sided sign boards made of 2 mm thick ACP(Aluminium composite plate) sheet face to be fully coverd with MICRO PRISMATIC RETRO REFLECTIVE sheeting (HIGH INTENSITY) in approved colour incl 25 mm wide border of high intensity prismatic grade tape and writting required message in two language (English & Hindi ) using symbol (Block,Roman, Italic or Indian) ,commas, indexhand,arrow,dashes,stops etc (letter size n exc. 30 cm high) using HIGH QUALITY/HIGH INTENSITY PRISMATIC GRADE TAPE fixed on the sheet through hand squeeze roller applicator all inclusive in quated rates as per sample all as specified and directed .

S&F for factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed.

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side Prelam PVC sheet used instead of Plain colour PVC sheet. to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable Prelam PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F for aluminium, anodised, barrel tower bolts of extruded section of 150 mm long complete all as specified and as directed.

S&F for aluminium handles, cast type, anodised of 100 mm long complete all as specified and as directed.

S&F for 75 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and as directed.

S&F for rotational moulded polyethylene water storage tanks multilayer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank and Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed to 20 mm bore pipe inculding dismantling of old water Tank complete all as specified and as directed.

S&F for rotational moulded polyethylene water storage tanks multilayer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm Nipple suitable for HDPE water tank and Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed to 20 mm bore pipe. inculding dismantling of old water Tank complete all as specified and as directed.

Disconnecting existing exceeding 500 ltr but not exceeding 1000 ltr tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of 500 ltr capacity PVC water storage tank all as specified and directed.

S&F for PTMT Nipple 20 mm suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and as directed.

S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass and fixed (wight not less than 210 gm ) complete all as specified and as directed.

S&F for 110 mm dia PVC rain water pipes,single sockets, in any length with sealant rubber ring joints fixed to wall incl necessary MS flat iron clamps of size (40x4mm) all as specified and as directed.

S&F for 75mm dia, PVC rain water pipes, single socketed,in any length with sealant rubber ring joints fixed to wall incl necessary MS Flat iron clamps of size (40x4mm) all as specified and as directed.

S&F in repair of 110 mm bore, PVC (SWR) bends of any radius complete all as specified and as directed.

S&F in repair PVC (SWR) junction, single, (single T) equal or unequal 110mm bore complete all as specified and as directed.

S&F in repair 75 mm bore, PVC (SWR) bends provided with access door of any radius complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) junction, single, (single T) equal or unequal complete all as specified and as directed.

M&L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solven cement as in repairs complete all as specified and as directed.

S&F for CP grating 100mm dia with or without waste hole, fixed to floor trap in repair complete all as specified and as directed.

Internal Electrification

Taking down carefully copper/aluminium point wiring complete (light,fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets main switches, DB removing materials to store & making good of disturb surfaces of wall/floors etc as specified & directed.

M&L for point wiring complete as specified with 1100 V grade with 1.5 Sq mm single core PVC insulated unsheathed FRLS cable, copper conductor multistranded passing through including concealed PVC conduit not essthan 20 mm dia with concealed modular box suitable for logic modular switches , sockets , etc and logic modular white plates, sorroundings of suitable size as required at site with PVC insulated FRLS unsheathed stranded copper conductor of size 1.5 sq mm as earth wire connected to common earth dully as specified complete all as specified and directed for the following:- Note:- (i) Rate quoted shall include for cost of making MS box and concealed in wall including cutting and sinking of boxes and making good to the walls (No extra payment will be made for the same) (ii) Provision of blank plates as per site requirement (No extra payment will be made for the same)

All as per item No 3.01 but One light point / one fan point controlled by one, one way swtich.

All as per Item No 3.01 but One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per item No. 3.01 here in before but on independent board.

All as per ser item No. 3 .01 herein before but with 2.5 Sqmm PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 2.5.0 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including boards for mounting purposes.

S&F Switch modular type, single pole, one way, 5/6 Amp, one module, completes all as specified and directed.

S&F Switch modular type, single pole, one way, and 15/16 Amps, one module complete all as specified.

S&F socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, two module, modular type completes all as specified and directed.

S&F socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin 5/6 Amp, modular type completes all as specified and directed.

Taking down ceiling fans , any type and depositing MES STORE complete all as specified and directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers including necessary cutting on wall for fixing exahaust fan of size 300 mm sweep and making good the opening in cement mortor 1:3 or cement concrete 1:2:4 type B1 as required at site complete all as specified and directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 450 mm sweep with, blades, and frame and louvers including necessary cutting on wall for fixing exahaust fan of size 450 mm sweep and making good the opening in cement mortor 1:3 or cement concrete 1:2:4 type B1 as required at site complete all as specified and directed.

S&F Air Circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting with necessary fixing arrangment on wall complete. Make: Havell's Model Turbo Force equivalent in Almonard /Bajaj.

S&F in replacment of ceiling rose of size 65 x 50 mm surface bakelite 240 Volts three terminal as specified and directed.

Taking down FTL fitting any type and wattage complete all as specified and directed.

S&F LED lights fitting 1x20 Watt, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make: Bajaj/Philips/Crompton /Wipro/Havell's/Crompton

S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type ultra slim with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cases of suitable size complete all as specified and as directed. Make: Bajaj Cat Part No. BZSSQL 36 LED G54 WH /Equivalent in Philips/Crompton /Wipro/Havell's/Crompton

S&F LED Down Lighter round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make: Bajaj Cat Part No. BZSLO nxt 15L LED WH SD or Equivalent model of Philips/Crompton /Wipro/Havells.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F Water heater storage type, electric complete capacity 25 litres.BEE 5 star rated, PUF insulation, Adjustable knob for tempearture setting, including Flexible connection pipe accessories Max up to 600 mm for both hot and cold pipe from angle cock , complete with fiixing accessories on wall by using 50 X 5 mm MS plate/Strip and writing MES no and complete all as specified and as directed . Make : Havells Model Monza DX Cat Part No. GHWAMGSIB025/ V- Guard Model IRIS25 or equivalent in Racold/Crompton.

S&F MCB DB SPN double door 12 way , IP 43 protection concealed on wall complete all as specified and directed. Make: Make : Indo Asian /Legrand /L & T /Standard/Havell's

S&F MCB DB SPN double door 08 way , IP 43 protection concealed on wall complete all as specified and directed. Make: Make : Indo Asian /Legrand /L & T /Standard/Havell's

S&F RCBOs for Earth leakage , over load and short - circuit protection 32 Amp DP 100 mA complete all as specified and directed.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed.

S&F MCB SPN 6 to 32 Amp ,10 KA complete all as specified and as directed ( Incomer to SPB 8/12 Way DB's)

S&F power unit 4 module up to 25 Amps including sockets 25 Amps with six module concealed metal box for mounting of power unit and power socket complete all as specified and directed. Make - Legrand cat no-675558 for mudulaar power unit ,Make - Legrand Cat No 67372 32 for 25 Amp socket , 6 module Box Make - Legrand Cat No 6890 10 or equivalent as approved by GE.

M&L for submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 4.0 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 4.0 Sqmm 1100 Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. (power supply to DB 's and AC ) Note:- (i) Three runs of cables drawn in conduit will be measured as one length of sub main. (ii) PVC conduit and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

S&F LED Flood light 120 W IP 65 along with necessary fixing arragement on wall /pole complete all as specified. (For building security light)

M&L for submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 2.5 Sqmm drawn through in and including rigid PVC heavy duty conduits surface type including 2.5 Sqmm 1100 Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed ( Connection to LED Flood light for BLDG Security light) Note :- (i) Three runs of cables drawn in conduit will be measured as one length of sub main. (ii) PVC conduit and its accessories is deem to be included in this item rates.

S&F Shadowless type LED Operation theater Mobile light (Minor OT) alongwith emergency power backup for 30 min unit complete all as specified and directed with following parameters Make: Dentis Model No S 300 or equivalent make of Philips / Cognet) :- Technical Specifications:- (i) Maximum illumination intensity : 1,30,000 Lux (ii) Variable Colour Temperature :3800/4300/4800K (iii) Colour rendering Index Ra/R9 :96/95 (iv) Operator Field diameter :15-25 cm (v) Focus :Adjustable (vi) Working Distance : 100 cm (vii) Depth of illumination L1+L2 at 20% :1500 mm (viii) Depth of illumination L1+L2 at 60% :750 mm (ix) Illumination Control :30-100% (x) Number of LEDs :42 (xi) Life time of LEDs :60000 Hrs (xii) Light Head Diameter :43 +/-1 cm (xiii) Detachable Centre grip :Yes

Shadow Dilution (i) With Tube :100% (ii) With 2 Mask :50% (iii) With 2Mask+Tube :50% Mains Mode (i) Input Voltage :100~240Vac, 50/60Hz (ii) Mains input protection :By SMPS (iii)Battery charger : UPS (Indegeneously Made ) suitable for 30 min backup (iv) Output Voltage :Fix Voltage CERTIFICATION Note : (i) The installation , Testing and commissioning of Light should be done by OEM .(ii) The contractor shall provide free service for one year from the date of completion

Supply, installation, testing and commissioning of 1 KVA online UPS with CRCA enclosure, input voltage : 160-260 Volt AC Single phase, frequency : 50Hz+6%, output voltage : 230Volt + 1%, Fequency : 50 Hz, Power factor 0.8 including sealed maintenance free battery bank with suitable number of battery to cater the full load for 60 minute minimum back up time along with FRP made battery Rack/stand with adequate shelf as required to accomadate all battery, microprocessor based display for I/P & O/P voltage, DC Voltage output, frequency, % battery back up etc, LED Indicators for Mains On, Battery On, Charge, Low Battery imminent, load in inverter, Load in Auxillary supply etc, Electrical protection : Input/ Output/ Under volt, over temp, over load, shortcircuit and battery low trip, surge protection, inbuilt over voltage cutoff device etc, inbuilt isolation transformer between UPS out put and Supply Mains, intergration of UPS with battery bank, UPS shall have multi line LCD display which shall show various status parameters of system and UPS shall give audio signals /Alarms for battery mode low battery or other faults etc complete all as specified and directed. (Make : Luminous /V-Guard/ Blue Bird, Excide, Microtek or equivalent)

EXTERNAL ELECTRIFICATION

Supply,install,test and commissioning of IN-door type LT distribution box made out of 2.0 mm thick CRCA sheet type ,totally enclosed weather dust and vermin proof as per IS with front and rear opening suitable locking arrangement having copper bus bar of 600 Amp capacity for RYB and neutral and insulated with insulators, including connecting incoming and outgoing cables necessary PCC 1:3:6 in foundation and made out of 50 X 50 X 6 mm angle iron grouted at ground above 30 cm from ground level Comprising the following Note : Cost includes necessary internal wiring for meters , CTs, indication lamps,etc and Rigid bus bar connections from bus bar to MCCB terminals connection Bus to MCCB/MCB connections ( LT Panel Board inside the LT Panel Room ) Incoming :- (i) MCCB 315 Amp 4 pole 36 KA - 01 No. (ii) Digital multi function Meter 0 - 500 Volt Make: Legrand/ L & T /HPL (iii) LED type Indicating lamps -03 Nos [Make : C& S/ Neptune / L&T / Vaisnavo] CT's 500 /5 Amp - Set of three [Make :AE / Kappa] Out going :- (i) MCCB 200 Amp, 4 pole , 36 KA -02 Nos (ii) MCCB 100 Amp, 4 pole , 36 KA -04

S&F LED type spike light 10 Watt out door type 230 watt volts AC outdoor type including necessary PCC fundation of size not less than 300 X 300 X 600 MM complete all as specified Make: Bajaj Cat Part No. BGSBL 9W LED WW/Equivalent in Phlips/Havell's /Crompton.

S&F post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete ( For Gate lights) Make: Havells cat part no. Victoria or equivalent model of makes Philips/Crompton/Wipro

Supply, laying and testing cable XLPE Insulated ,screened, PVC edded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of cross sectional area 10 sq mm 4 core complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 metre wide and not exc 1.5 metre in depth for foundation of pole / stay, or cable trenches and getting out in soft/loose soil complete all as specified and as directed by the Engineer in charge

Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25 cm in soft loose soil complete all as specified and as directed by the Engineer in charge

Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point all as specified and as directed by the engineer –in- charge.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 40mm dia conforming to IS, approved colour complete with fittings for cable protection complete all as specified and as directed.

S&F junction box made from SMC/FRP sheet ready made of size 310 X 285X 180 mm with aluminium bus bar of 100 Amp capacity for RYB and half for neutral made in suitbale size fixed inside the junction box with necessary supporting insulators fixed on hylem sheet ,MS sheet steel fixed inside the bottom portion of box to connect the cable gland complete , entire assembly fixed to pole /Wall with MS clamp 25 X 5 mm and nuts & bolts, or inside the Copping of pole /Post top including MCB SP 6 Amp 10 KA 240 V - 1 No, with necessary size copper lugs for connecting cables from junction box to fittings complete all as specified and as directed.

M&L for LED strip lighting 75 Watt warm light , IP 65 including driver and connection arrangements for fixing Metal on sign board complete all as specified. Make: Bajaj / Phlips/Havell's /Crompton. Note:- Lenght of strip considered 10 mtrs in one unit.

Supply and install split type air conditioning units Indoor /out door complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor quality with minimum 5 star rating of capacity 1.5 TR complete all as specified and as directed.

S&F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA ( For Ac's) complete all as specified and as directed.

S&F power unit 4 module up to 25 Amps including sockets 25 Amps with six module concealed metal box for mounting of power unit and power socket complete all as specified and directed. Make - Legrand cat no-675558 for mudulaar power unit ,Make - Legrand Cat No 67372 32 for 25 Amp socket , 6 module Box Make - Legrand Cat No 6890 10 or equivalent as approved by GE.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed.

M&L for submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables cross sectional area 4.0 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including cross sectional area 4.0 Sqmm 1100 Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. ( Ipower supply to DB 's and AC ) Note :- (i) Three runs of cables drawn in conduit will be measured as one length of sub main. (ii) PVC conduit and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

DEEP NIRMAN

M/S JAGDISH PRASAD AGARWALA

M/S AHUJA TRADING

M/S MANODEEP CONSTRUCTION