SPECIAL REPAIRS TO BUILDING NO - 11 AT BOLTON ROAD AT CAW UNDER GE (AF) HAKIMPET

Amount

Dismantling of single layer mangalore pattern or similar tiles in roofs complete all as specified and directed.

Dismantling of battens for tiles, shringles etc of any size including tilling fillet spaced exc 15cm complete all as specified and directed.

Dismantling of mild steel work as in wind Tie, grills, grating etc complete all as specified and directed.

Dismantling of fillets rails, posts, rafters, purlins etc under 40 sqcm in section, unframed work complete all as specified and directed

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed

Dismantling of timber scantling 40 Sqcm and over in section in any position as in unframed work, complete all as specified and directed.

M&L 2nd class hard wood (kiln) as in scantling, clean sawn and fitted in unframed works including ceiling etc complete all as specified and directed.

All as item No 7 above but except timber scantling-ditto-.

M/L second class hard wood plain filletes (Exc 6 & n.exc 13 sq.cm ) square or rectangular in section , clean sawn, secured with niles complete all as specified and directed.

M/L second class hard wood Battens for tiles 30cm centre to centre cross section area exc 5 sqcm and not exc 15 sqcm complete all as specified and directed.

S&F MS framed work such as grills, guard bars,tie plates for truss or posts etc complete all as specified and directed.

M & L preparing wood and wood based surfaces, new or old of any description and girth, not otherwise described & treated with two coats of creosote oil complete all as specified & directed.

M & L 0.63 mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screw and washers, in roofs, walls etc with grade of zinc coating 275 complete all as specified and directed.

All as per item No-13 above but except sheet -ditto-.

S & F 0.80mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

M/L mangalore patern roof tiles interlocking at side joints laid dry complete all as specified and directed

M/L magalore patern ridge tiles bedded and jointed in cement mortar 1:6 complete all as specified and directed

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for coping of roof complete all as specified and directed

M & L PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in flooring benching to drain, coping, bed block etc and the like edge slightly rounded or chamfered including necessary form work complete all as specified and as directed.

Demolition of wall and ceiling boards ( fiber, pulp, insullation etc ) or insullation boards / slabs, blankets any thickness including cover fillets complete all as specified and directed.

S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre complete all as specified and directed.

M & L Seamless calcium silicate ceiling made out of 1800 x 1200mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish complete all as specified and directed.

M & L for applying one coat of alkahi resistant primer to ceiling surfaces of boards including preparation complete all as specified and directed.

M & L for applying one coat of Altec putty to ceiling surfaces of boards including preparation complete all as specified and directed.

M&L applying two coats of distemper oil emulsion on ceiling boards complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and forecast concrete articles, complete all as specified and directed.

M & L Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

Taking down cement plaster from stone/brick walls including raking out joints for keys and scrubbing down with water etc, complete all as specified and directed.

M&L rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished even & smooth without using extra cement in CM 1:6, complete all as specified and directed.

M & L applying one coat of Altec putty finish to wall surfaces including preparation complete all as specified and directed.

M&L rendering 15 mm thick on fair face of brickwork or concrete surfaces on one side of lathing finished even & smooth without using extra cement in CM 1:4, complete all as specified and directed.

M&L applying two coats of cement based paint over a coat of alkali-resistant primer to new/scrubing of old surfaces of walls complete all as specified and directed.

S & F Mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde-E-165.

Taking down Chowkats or frames not exc 1.5 Sqm each with shutters (without taking off shutters from the frames.) complete all as specified and directed

Taking down Chowkats or frames exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 30 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to raceive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered complete all as specified and directed.

S&F aluminium alloy wire cloth or XPM, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S & F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section

Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.

S & F 75 mm long medium weight, cold rolled mild steel Butt hinges.

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges.

S & F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S & F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty oin squares not exceeding 0.5 Sqm in each pane

S&F aluminium plate type II gate and shutter, hook & eye 125mm size.

S&F floor door stopper of aluminium alloy powder coated body and tongue, anodised, with hard drawn steel spring, fixed to door shutter, overall length of cover plate 140 mm.

S&F 5mm thick dark tinted glasses of approved superior (one way) quality pane for door/windows.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

M & L Plain cement concrete type B-1,1:2:4(using 20mm graded stone aggregate) 40mm thick as in floors.

M & L Screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes.

S&F vitrified ceramic tiles 10mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.

All as per item No-54 above but on vertical surfaces such as skirtings, matching to the floor-ditto-.

M&L rendering 10mm thick in CM 1:3 to wall as a backing coat to dados.

Removing building materials etc to any distance outside the MOD land including loading, unloading and stacking at the destination complete all as specified and directed

Complete removal of existing treatment on old surfaces of walls and applying two coats of cement base paint over coat of alkali resistant primer to wall surfaces complete all as specified and directed.

M&L preparation of old plastered surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant of walls syrfaces including removal of existing treatment complete all as specified and directed.

Preparation of New wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and directed.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Taking down carefully aluminum/copper point wiring (light fan socket or power) complete, including fittings & fixture such as switches with board, ceiling roses , pendents , bell , bell push, lamp holders, regulators , sockets, light fittings etc. removing material from site and making good distrurbed surface of walls, floors etc. including paint touch up to match with the existing surface complete all as specified and as directed.

Taking down unserviceable MCB DB, plug & socket boards alongwith MCBs of any description and making good the disturbed surfaces of walls to match with existing finishes complete all as specified and as directed.

Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable, with multi-stranded copper conductor cable, 1100 volts grade, drawn through and including non metallic medium grade, rigid PVC conduit with all conduit accessories (including concealing in any type of wall and finishing to match with the sorroundings) and including provision of 1.5 sq mm PVC insulated copper cable FRLS as earth continuity conductor, fabricated steel terminal box made out of 1.60 mm thick MS sheet concealed in walls (Modular/ non modular as per site ) for fixing the switches/ socket/ fan regulators etc, all as specified and as directed. Note : Cost of modular cover plate & base frame shall be measured and paid separetely.

One light point controlled by one way switch 5A, SP

One ceiling fan/ Wall mounted fan point controlled by one way switch .

One 2/3 pin 5 Amp socket out let on the same board with other switches.

One 3 pin 5 Amp socket out let point on independent board.

All as per item No.66 above here-in-before but with 2.5 Sq mm single core copper conductor cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 Amps switch socket combination point including running of 2.5 Sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. complete all as specified and as directed.

All as per item No.66 above here-in-before but using 4.0 Sq mm single core copper conductor cable of multistranded PVC insulated unsheathed 1100 volts grade for AC industrial socket including running of 4 sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

M&L Modular switch 6A, 1 way.

M&L for Modular switch 16A, 1 way.

M&L for Socket outlet 6A modular.

M&L for Socket outlet 16A modular.

Supply & fix single pole and neutral enclosure with a two pin, earth plug and socket concealed in wall complete with one 20 Amps single pole MCB including necessary electrical connections and fixing arrangements complete all as specified and directed.(For AC)

S & F Modular ceiling fan regulator 2 Module step type AC 240 volt suitable for 1200/1400 mm sweep

S & F ceiling rose, 3 terminal, PVC/Polycarbonate isolated body.

S & F Angle/batten holder including LED lamp of 7 watt of insulated body with back plate for angle/batten fittings fixed with wooden round blocks complete all as specified.

S & F sheet metal enclosure vertical type DB TPN 4 way double door suitable for and including 100 Amps TPN MCCB 25 KA as incommer and 12 Outgoing SP MCB's with magnetic locking system complete all as specified . Note : MCB SP shall be measured and paid seperately.

S & F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 Volts double door with magnetic locking system complete all as specified and as directed.

S & F MCB SP 6 to 32 Amps, 240 volts, suitable for fixing in MCB DB 'C' series complete all as specified and as directed.

S & F MCB SPN 32 Amps, 240 volts suitable for fixing in MCB DB 'C' series complete all as specified and as directed.

S & F 2"X 2" recess mounted fitting of any type, supply and fix, newThe Venus Neo tunable white is a range of color tunable LED recessed panels that support "Human Centric Lighting". The product features color tuning from 3000 K to 6500 K with precise control on tuning and dimming and is perfect for applications such as office workstations, meeting rooms and cabins,hospitals, classrooms etc Make : Havells, VENUSNEOTW2X2PLR42WLEDTWMOD 'OR' equivalant in Phillips / CG.

S & F 20W LED light fitting 4" wall mounted New E-Lite LED Triyca batten. A Color changing LED batten with options of 3000 K, 4000 K & 6500 K, allin one fixture extruded aluminium heat sink provided for efficient heat dissipation & intergrated electronic driver including suitable copper cable all as specified and directed.

Sub main wiring complete with two runs of 6 Sqmm single core PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable with one run of 6 Sqmm single core, PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable as earth continuity conductor, drawn through and including suitable size of non-metallic rigid PVC conduit and conduit accessories concealed in any type of wall including stone masonry, floors / fixed to ceiling etc. all as specified and as directed. NOTE: Two runs of 6 sqmm cable conductor, one run of 6 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length.

M&L for Earthing complete with galvanised cast iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 5 of SSR part I 1991 or directed.

Supply and replacing of tamper proof AC Three Phase Static Energy meter of Accuracy Class 1.0, 3 x 240V, 50Hz, with Backlit LCD Display, of rating 10-60A (Measures & Displays kWh, V,I, kW, PF, Hz, Last month history of kWh & MD in kW) with special features like TOD,Tamper logging, Optical Communication Port , including taking down the old meter. Make : HPL, Model:TPPL15100000020C00 (Gurgaon) 'OR' equivalent in Secure, L&T , AE.

Supply and laying of XLPE insulated, armoured, heavy duty electric cables with aluminium conductor, 1100 volts grade, of size16 Sqmm, 4 Core cross-sectional area complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth in hard/dense soil for laying of LT cable / pole complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in hard/dense soil complete all as specified and as directed.

Removing, surplus excavated material to a distance n.exc. 50 M and depositing where directed at a level n.exc. 1.5 M above the starting point complete all as as specified and directed.

Supply and lay, fine river sand for cable cushioning in trenches or in duct complete all as specified and directed. NOTE: Punned thickness shall be measured and paid.

Supply and lay brick sub class 'B' old burnt for cable protection all as specified and as direceted.

B AND H CONSTRUCTIONS

K LAKSHMAN SINGH AND CO

STANDARD AGENCIES