Construction of Additional Drug Store, M.S. Grills , Tensile Membrane Fabric Structure for Car/ Ambulance Parking at 100 Bedded Sub-District Hospital Akhnoor.

Amount

Earth work in excavation by manual means in trenches for foundations, not exceeding 10 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: All kinds of soil

Providing and lying in position cement concrete of specified grade excluding the cost of centring and shuttering- all works upto plinth level. (crushed Stone 40 mm nominal size) 1 cement 5 coarse sand: 10 graded, stone aggregates 40mm size crushed Stone.

Providing and lying in position reinforced cement concrete of specified grade excluding the cost of centring and shuttering finishing and reinforcement-All works upto plinth level, 1 cement 1.5 coarse sand:3 graded, stone aggregates 20mm size crushed Stone

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree, landing balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding cost of centring, shuttering, finishing and reinforcement. 1 cement: 1.5 coarse sand : 3 graded stone aggregates 20mm nominal size

Providing and laying in position cement concrete of specified grade in retaining walls, return walls, parapets, coping, upto floor five level, excluding the cost of centring, shuttering and finishing: 1 cement: 3 coarse sand : 6 graded stone aggregates 20mm nominal size

Providing and laying in position cement concrete of specified grade in drain sides, excluding the cost of centring, shuttering and finishing: 1 cement: 3 coarse sand : 6 graded stone aggregates 20mm nominal size

Cetring and shuttering including strutting, propping etc and removal of the form work for:

Foundation, footing, bases of column

Suspended floors, roofs, landing, balconies and access platform.

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

columns, Pillars,Piers, Abutments, Posts and Struts.

Edge of slabs and break in floors and walls

Weather shade, chajjas, corcels etc., including edes.

Retatning walls. walls (any thickness) including attached pilasters.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Providing and Fixing bolts above 300 mm in length including nuts & washers complete (20 mm dia 900 mm long)

Providing and fixing of bearing plates & M.S.Gusset plates of required thickness as per specified & approved design.

Designing, fabricating, supplying and erecting in position a tensile membrane structure for car shed, the structure shall be made of M.S. pipes/sections of approved size & make, fixed with required base and gusset plates, brackets & also also the elongation systems, droped with more than 730GSM waterproof, Washable, fire retardent, dust repellent & residew resistant belgium seion & Teflon coated PVDF material including providing required scafolding & painting to the entire exposed surfaces of structure with high quality PU paint doing customised patterning of PVDF material fixing of PVDF material over the structure, cost of transportation, loading, unloading etc. similar to pattern as approved by Engineer-in-charge.

Brickwork with common burnt clay F.P.S (non modualar) bricks of class designation 75 in foundation and plinth in 1cement : 6 coarse sand mortar

Extra for masonry in superstucture above plinth level upto floor V level (by manual means)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal Wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and em beddings in cement concrete block 30x10x15 em 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size )

Brick Tile Corbelling (three layer) in 1:4 mix including providing and laying of cement concrete of required thickness and plastering complete in 1:4 mix and all carriages complete

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m.

Filling of R.B.M under floors including digging, ramming and watering, carriage and loading/unloading complete

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

12 mm Cement plaster of mix I cement: 6 coarse sand

Painting top of roofs with bitumen of approved quality at 17 kg per 10 sqm impregnated with a cost of coarse sand at 60 cudm per 10 sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete. Min residual type petroleum bitumen of penetration 80/100

Proving and Laying of PVC Tarpulin of superior and approved make including all coplete icluding taxes complete

10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 ( 1 clay: 1 cow dung) and covered with flat tile bricks of class designation 1 00 grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. 12.261 With Hand moulded F.P.S brick tiles

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and fixing 35 mm thickpanelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. Second class deodar wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10 kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30 mm Thick Second class deodar wood

Providing and fixing 30 mm thick wire gauze shutter using galvanised M.S. wire gauze .of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows: with bright finished butt hinges of required size with necessary screws. Second class deodar wood

Providing and fixing glazing of 4 mm thick glass panes in panelled and glazed shutters for doors, windows and clerestory windows with wooden beadings of 4 mm thick glass panes

Suppying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs manufacture from high tensile steel wire of adequate strength confirming to IS 4454 part1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover

Extra for providing mechanical device chain crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area

Providing and fixing in position collapsible steel shutters with vertical channels 20x1 Ox2mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T -iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles,including applying a priming coat of approved steel primer,

Providing and fixing M.S. grills of required pattern on walls embeding hold fasts in cement concrete 1:3:6 mix with M.S. flats, square or round bars M.S.Hollow sections etc including priming coat with approved steel primer all complete.

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.

Providing and fixing of M.S.Pipe/G.I.Pipe of approved size in railings, cattle guards or similar work including applying a priming coat of approved steel primer. Icliding all carriages and taxes complete

Supplying and stacking of good earth at site, including royality and carriage complete.

Suppying , fixing , welding of M.S.Welded Mesh to frames of approved design complete. M.S.mesh of size 30x30mm of wire dia 2.10 mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08%and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.

Making plinth protection 50mm thick of cement concrete1:3:6 1cement: 3 coarse sand: 6 graded Crushed aggregate 20mm nominal size over bed of dry Brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surafce even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.67 litre/10 sqm over and including base Coat of water proofing cement paint app-lied @ 2.20kg/10sqm)

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade New steel work (two or more coats)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work including primming coat with with ready mixed pink or grey primer of approved brand and manufacture on wood work .

Supplying of Que manager crowd control barrier starchion of stainless stell 202 grade, clear height of pole 90 cmm, pole size 6.2 cm dia and base pole dia 32 mm with 2 mtr retractable durable nylon belts complete set of 04

Providing & Fixing of Acrylic LED Glow Letters/Alphabets for signage boards of required size and shape complete as approved by Engineer-in-charge.

Providing & Fixing of Led sheet linning on door and walls of lead sheet min. thickness 2 mm wherever radiation shietting and protection is required in order to protect the medical staff persons from high frequency range of electro magnetic radiations.

Supply of lead linned Door made up of wood lined with 1.5 to 2.0 mm thick lead sheet fitted with all hardware accessories of size 7'-0''x 4'-0'' minimum thickness of door 35 mm

Supply of X-ray mobile shield of G.I/wood lined with Lead sheet 1.5 to 2.0 mm thickness, the solid pannel is constructed a single unpierced lead sheet laminated between two for mica pannels finished with window of lead glass of equal shielding capacity and fitted with steel braced legs with heavy duty wall bearing castors assuring stability and movability.

Supply and fixing of Garden Benches with cast iron leg supports and seating/back side of bench of rectangular tubes 2"x1" in length of 5'-0" size, angle of back 90 degree to 105 degree and painted with spray paint for shiny look complete. Size of bench 150cm x 60 cm x78 cm.

Providing and fixing of Aliminium hardware fitting ISI marked with necessary screws etc. complete. :

Towr Bolt 200 x 10 mm

Towr Bolt 100 x 10 mm

Handle 125 mm

Door Stopper (Twin)

Sliding Door Bolts 250 x 16 mm

Casement stays (Eye Hooks)

Filling the Gaps in between Aliminium frame and adjacent RCC/ Brick work/stone work by weathering silicon sealant over backer rod of approved quality as per architectural drawings and directions of Eingineer-in-charge.

Dismantling /Removing of aluminum / Gypsum false ceiling including disposal of unserviceable surplus material and stacking of serviceable material within 50 meters lead and fixing of same to other suitable location wherever required as directed by Engineer-in-charge.

Removing of Mulba/ building rubbish from drains by enging labours.

Disposal of Mulba/ building rubbish by enging trolleys outside muncipal limits bt MT av lead 5.0 kms including loading/unloading.

Providing and applying of 2.5 mm thick road making Strips of specified shade/ Colour using hot thermoplastic material by fully / semiautomatic thermoplastic paint applicator machine fitted with profile shoe heater, driven by experienced oprator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease & foreign material etc complete as per directions of Engineer-in-charge & accordance with applicable specifications.

Carriage of Material By MT

Sand by an av lead of 20 Kms.

Stone Aggregate by an av lead of 20 Kms.

Bricks by an av lead of 20 Kms.

Measurable quantities may vary at the time of actual execution of the work and shall be allowed as per actual with in the cost.

M/S PARDEEP KUMAR