Interior and other allied works in additional area at NBCC Corporate office at Lodhi Road New Delhi 110003

Name of Work: Interior & other allied works in additional area at NBCC Corporate office at Lodhi Road, New Delhi, 110003

AMOUNT (In Rs.)

S NO DESCRIPTION TOTAL

Please note that the bidder has to quote their bid with consideration of atleast 5 year warranty for all Electromechanical components. Back to Back OEM

warranty + Contract Copy of Warranty 1

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - INTERIOR WORKS

DSR 2023 AMOUNT (In Rs.)

S NO DESCRIPTION QUANTITY UNIT RATE

1 FLOORING WORKS

CEMENT CONCRETE: Providing and laying in position CEMENT CONCRETE of specified grade

4.1 exluding the cost of centring and shuttering-all work upto plinth level.

4.1.8 1: 4: 8 (1 Cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) 78.64 CUM 6812.00 535678.65

ALUMINIUM SKIRTING: Supply of 100mm Aluminium (Grade 6063) Skirting with 15

1.02 MR micron anodising In Natural Finish. Thickness 1.30 to 1.50mm. Designed to conceal screws. 486.00 METRE 360.00 174960.00

Seamless finish. Complete with Rubber/ PVC Jointers and Gasket.

VITRIFIED TILES: Providing and laying Vitrified tiles full body with smooth surface in floor

(thickness 15 mm to be specified by the manufacturer), with water absorption less than

0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and

1.03 MR shade, laid with cement based high polymer modified quick set tile adhesive (water based)

conforming to IS: 15477, in average 6 mm thickness, approved make Kajaria, Somany, RAK

or equivalent. as per direction of Engineer-in charge.

CARPET TILES: Providing and laying carpet tile flooring. Carpets shall be of Type 6 nylon

loop pile carpet tiles/Plank. The carpet shall have sufficient gauge (1/10 ~ 1/12) with

sufficient stitches (10~13) per inch. The carpet shall be solution dyed fibre content or with

1.04 MR injection printing technology. The carpet shall have the pile height ranging from (2.0 ~ 3.0) 562.00 SQM 6000.00 3372000.00

mm with average density higher than 4500 Oz/ cubic yard. The total thickness of the carpet

tile shall also range from (5.5 ~ 6.0) mm.

IPS FLOORING: 52mm thick cement concrete flooring with concrete hardener topping,

under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size) and top layer 12mm thick cement hardener consisting of mix

1.05 11.4 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, 562.00 SQM 978.45 549888.90

hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's

specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps

KOTA STONE : Kota stone slab flooring over 20 mm (average) thick base laid over and

1.06 11.26 jointed with grey cement slurry mixed with pigment to match the shade of the slab, including 0.00 SQM 1895.65 0.00

rubbing and polishing complete with base of cement mortar 1: 4 (1 cement: 4 coarse sand):

FLAMED FINISH GRANITE : Providing and laying flamed finish Granite stone flooring in

required design and patterns, in linear as well as curvilinear portions of the building all

complete as per the architectural drawings with 18 mm thick stone slab over 20 mm

1.07 11.55 (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with

cement slurry and pointing with white cement slurry admixed with pigment of matching shade

including rubbing, curing and polishing etc. all complete as specified and as directed by the

Engineer-in-Charge :

Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

HEAT RESISTANT TILES : Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300

mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial

emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement

1.08 12.55 sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of 349.50 SQM 1703.95 595530.53

white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface

upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet

walls in the same manner.

Laminated wooden flooring : Providing & Fixing of laminated WOODEN FLOORING Panel

1820x145 Total thickness 14 mm Numbers of panels per pack 6 Nested Lengths Max. 1 plank

out of 6 m2 per pack 1,583 m2 Kg per pack 11,99 kg Toplayer PEFC controlled sources EN

13489 ± 3 mm Core board PEFC controlled sources Spruce Backing layer PEFC controlled

sources Wood Veneer 2 mm Tongue and groove Length Uniclic Width Uniclic Multifit Domestic

use Conditions in each pack 33 years Uniclic - Multifit connection Lifetime Commercial On

request "Wood for Life" Edge Protect + Provides a warranty on build-up of residue dirt along

the edges due to maintenance over the years 5 years "Wood for Life" Surface & Edge Protect

+ (lacquered products only) Provides a warranty on pollution of surface structure and a

1.09 MR warranty on build-up residue dirt along the edges due to maintenance over the years 10 120.00 sq m 2500.00 300000.00

years Surface layer Wood species Oak Origin Europe Finishing UV cured Oiled finish 2 layers

UV cured Lacquer Anti-scratch top coat 5 - 7 layers Natural variance Due to nature, visual

surface can deviate from samples Surface treatments cf catalogue/website Nature Marquant

Vibrant General aspect of installed EN 13489 Lipping - difference in height (mm) ≤ 0,20

difference in width (mm) ≤ 0,20 cupping lengthwise % ≤ 0,1 cupping in width % ≤ 0,2

Dimensional stability ISO 24339 Cupping short side max % ≤ 0,30 Changes 30 - 85 % RH

Cupping short side min % ≥ - 0,20 Open joints short side (mm) ≤ 0,20 Open joints long side

(mm) ≤ 0,30 Underfloor heating Suitable of special installation instructions.or its equivalent

2 FALSE CEILING WORKS

SCHEDULE OF QUANTITIES - INTERIOR WORKS

DSR 2023 AMOUNT (In Rs.)

S NO DESCRIPTION QUANTITY UNIT RATE

GYPSUM BOARD CEILING: Providing and fixing false ceiling at all height including providing

and fixing of frame work made of special sections, power pressed from M.S. sheets and

galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and

37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5

mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of

25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle

hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200

mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with

tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be

fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out

2.01 12.45 of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter

channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter

of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm

long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section

and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c,

including jointing and finishing to a flush finish of tapered and square edges of the board with

recommended jointing compound , jointing tapes , finishing with jointing compound in 3

layers covering upto 150 mm on both sides of joint and two coats of primer suitable for

board, all as per manufacturer's specification and also including the cost of making openings

for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably

fixed, all complete as per drawings, specification and direction of the Engineer in Charge but

excluding the cost of painting with

12.5mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011

(Board with BIS certification marks)

OPEN CELL CEILING: Supply and installtion of Metal open Cell ceiling made of GI made and

powder coated of approved RAL shade. open cell ceiling with cell size of 50 x 50 mm. The cell

is formed by locking of upper sections and lower sections with U shaped profiles of 40mm

height 15mm width and 595 mm length. The upper and lower sections when locked are

locked with end panels on all 4 sides to form a tile of 595 x 595mm. Each tile is installed on a

15mm T Grids system The grids system is formed by locking of GI made Main T of 3000mm

or 3600mm length and GI Cross T of 600mm at 600mm c/c. GI wall angle 25x25

x0.4x3000mm {Material-GI(IS513),YS-280Mpa,Finish-Galvanised 90GSM(IS277)} is fixed

along the periphery of the ceiling with wooden screws at 300mm centers or Hilti HPS

2.02 MR 6x40mm placed at 600 mm c/c. The grid system is suspended by 4 mm wire rod with 5.00 SQM 2800.00 14000.00

adjustable clip, connected to the grids system at 1200mm c/c. The suspension rod with clip is

fixed to the slab by means of soffit cleat and rawl plug ( fastner), at 1200mm c/c. Gyproc®

soffit cleat 27x37x25x1.6mm {GI(IS513)YS-260Mpa, Finish-Galvanised 120GSM(IS277) } is

fixed with Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR1 grade, Zinc coating (7 to 8

microns) pull out load- 6.8kN for M30 concrete grade} Suspension etc. all complete as per

direction of Engineer-in-charge.. (Make- SAINT GOBAIN/ Product should be GreenPro

Certified / IGBC / GRIHA Compliant. Product should be GreenPro Certified / IGBC / GRIHA

Compliant. Manufacturing- Make In India (Govt. of India Initiative). System should be

complete in all respect as per direction of Engineer-in-charge.

3 WALL FINISHES WORKS

GLASS PARTITION (FIXED DOUBLE GLAZED GLASS PARTITION): Providing & Fixing of

Double glazed modular system consists of Aluminium section of 30x75x1.5mm thick ,With

adaptable profile for 6 mm Groove system to accommodate the carpet & the uneven surfaces.

All sections duly anodised up to 20-25 microns with 6063-T6 grade and required accessories

3.01 MR i.e. glass to glass aluminium I/H sections, T section & 90 degree L sections & Glass packing to 77.57 SQM 11766.00 912665.09

adjust the floor level. Ceiling profile, Floor profile and wall profile are 30 mm visible face and

75 mm wide with 10/12 mm toughened glass & insertion of Thermoplastic gasket to adhere

the glass firm & airtight. The sound reduction Value is from 42 to 45 Db.

STYLED GLASS DOOR: Providing & Fixing of Partition System Double Glazed Stile Door

having size of 75x55mm with door profile GD-75T+ i.e.. 6063-T6 Virgin grade duly Anodized

Aluminium Door Sections having sizes of 75x30x1.5mm thick, 2 Layers of 6 mm toughened

Glass including Geze make Door Closer TS3000V, 5nos Flush Hinges, SS Offset D type Pull

Handle 25 x 450mm with narrow Stile mortise Dead lock, Door Seal & Gaskets

WOODEN DOOR FRAMES: Providing wood work in frames of doors, windows, clerestory

windows and other frames, wrought framed and fixed in position with hold fast lugs or with

3.03 dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for

9.1.1 Second class teak wood 0.09 cu m 142949.70 13508.75

WOODEN BATTENS: Providing and fixing specified wood frame work consisting of battens

8.27 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming

8.27.1 Kiln seasoned and chemically treated hollock wood 1.00 CUM 187277.65 187277.65

FLUSH DOOR SHUTTERS: Providing and fixing on all height prefabricated factory made

40mm thick flush door shutter in existing door frame bounded with BWP type synthetic resin

adhesive & wooden fillers as per IS 848 -1974 shutter should be confirm IS:2202 (part-1)

non decorative type flush door of area up to 1.80 to 2.50 sqm and nothing shall be paid on

account of size variation upto 5% plus mimus of make Greenlam, Duro, Century or Equivalent

with both side 4mm thick decorative teak veneering of make sapele/white american

oak/vintage teak including fixing on all edges 8mm thick second class teak wood

3.05 MR. margin/lipping with 8 mm thick clear vision/frosted glass fitted vertically in flush door shutter 28.80 SQM 3838.00 110534.40

of make Saint Gobin, Modi Guard & Hindustan National Glass fixed all-round by 4mm thick

second class teak wood margin/molding and size of cut in flush door shutter will be approx.

200x1800mm or as per approved drawing and one no. of door rubbershutter finished

complete with PU polish all-round i/c SS butt hinges and SS screws all complete as per the

direction of engineer-in-charge. (Note: this item is inclusive of all material, T&P and labour

involved and the work shall be executed as per the approved drawing).

WOODEN LIPPING: Extra for providing lipping with 2nd class teak wood battens 25 mm

3.06 9.23 minimum depth on all edges of flush door shutters (over all area of door shutter to be 10 SQM 462.35 4623.50

SCHEDULE OF QUANTITIES - INTERIOR WORKS

DSR 2023 AMOUNT (In Rs.)

S NO DESCRIPTION QUANTITY UNIT RATE

FLUSH DOOR FLOOR MACHINE : Providing Double cylinder Floor Spring D-120 for

Wooden door with Closing Force EN 4 with Maximum door weight 120 Kg. Maximum door

3.07 MR width 1250 mm.Closing speed : 130° Final closing speed : 15-0°. Hold Open (standard): 90° 2 SET 15039.00 30078.00

hold open. Weight of floor spring approx : 6kg, 5,00,000 cycles Tested. approved make and

model all complete as per the direction of Engineer-in-charge.

TOP & BOTTOM STRAP : Providing top and Bottom Strap for wooden doors of approved

make and model all complete as per the direction of Engineer-in-charge.

FLUSH DOOR DEAD LOCK : Providing and Fixing 160 mm Euro Dead lock with Rose rings

3.09 MR for wooden doors of approved make and model all complete as per the direction of Engineer- 2 Each 1238.00 2476.00

FLUSH DOOR LOCK CYLINDER : Providing and Fixing 60 mm Eco Pin Cylinder 1CK SS

3.10 MR Cylinder One side knob and one side regular key for wooden doors of approved make and 2 Each 1137.00 2274.00

model all complete as per the direction of Engineer-in-charge.

FLUSH DOOR HANDLE : Providing 32x840 mm SS 304 H type Handle for wooden doors of

3.11 MR approved make and model all complete as per the direction of Engineer-in-charge. 2 Each 4202.00 8404.00

Material: Stainless Steel; Finish: Satin Stainless Steel (SSS).

GLASS FILMS: Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special

CRYSTAL-effect film to reproduce Sand-blasting effect on glass with customised designs,

thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8) with adhesive having minimum

tensile strength of 3.5 pound/inch at 73 F (0.6 kg/cm at 23 C). Adhesion after 24hrs of

installation should be 4 pounds/inch (0.7 kg/cm) on Acrylic, Glass Polycarbonate: MCS

warranty of 3yrs (if exposed to direct sunlight) to 15yrs (indoors).

LACQUERED GLASS: Providing and fixing of 6mm thick annealed SGG Planilaque Evolution

(premium GRIHA rated lacquered glass from Saint-Gobain) of approved color by Architect/

Client / Customer, fixed with SGG ULTRAFIX (compatible neutral core silicon/ double sided

tape) on a perfectly leveled 12mm thick water proof marine plywood / MDF / Mineral fibre

board which is mounted on the RCC wall/any other structure. Lacquered glass must be made

industrially (via curtain coating process); opaque (if viewed against a support wall), coated

3.13 MR with PU lacquer (50 micron thick); color consistency (measured by Minolta 83.95 SQM 5004.00 420085.80

spectrophotometer CM5081); highly durable (passes PERSOZ hardness test for minimum 220

oscillatios); humid resistant (conforms to BS EN 1036 1999); environmentally friendly (no

lead, no arsenic, no copper, noformaldehyde); appropriate recycled content (12% post

industrial/ 6% post consumer); compressive strength (1000 MPa) & tensile strength (40

MPa), same as float glass;

GYPSUM BOARD PARTITION: Providing and fixing partition upto ceiling height consisting of

G.I. frame and required board, including providing and fixing of frame work made of special

section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side

inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm

and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre

with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal

screws with nylon plugs and the studs 48mm wide having one flange of 34 mm and other

flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel

and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including

9.105 fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or

metal screws with nylon plugs at spacing of 450mm centre to centre, and fixing of boards to

both side of frame work by 25mm long dry wall screws on studs, floor and ceiling channels at

the spacing of 300mm centre to centre. The boards are to be fixed to the frame work with

joints staggered to avoid through cracks, M.S. fixing channel of 99mm width (0.9mm thick

having two flanges of 9.5mm each) to be provided at the horizontal joints of two boards, fixed

to the studs using metal to metal flat head screws, including jointing and finishing to a flush

finish with recommended jointing compound, jointing tape, angle beads at corners

(25mmx25mmx0.5mm), joint finisher and two coats of primer suitable for board as per

manufacturer's specification and direction of engineer in charge all complete.

75mm overall thickness partition with 12.5mm thick double skin fire rated Glass Reinforced

9.105.1 Gypsum (GRG) plaster board conforming to IS: 2095: part 3 (Board with BIS certification 10.00 SQM 2131.10 21311.00

ACRYLIC SOLID SURFACE CLADDING: Supply & Installation of 12 mm thick

Thermoformable Acrylic Solid Surface Sheets (DuPont Corian/ Tristone/ Lotte), over a robust

substrate made out of BWP/ Flexi Ply/ MS- Aluminum sections etc. as required, to achieve

stated design intent. ASS in 12mm thickness, shall be manufactured as per guidelines of ISO

19712. ASS sheets to be cut, pasted and finished over the substrate as provided, to achieve

3.15 MR smooth and seamless finish. Item cost include intend adaptation, supply, freight and 80.00 SQM 8635.00 690800.00

installation of ASS sheets to site, wastage, finishing, creating provisions/ cut-outs for

accessories and final placement of table. Work shall be done by company's authorized Quality

Network (QN) fabricator, as per satisfaction of Engineer-in-Charge. Colours: Basic, Solid and

small speckled (Group I & 2)

WINDOW BLINDS: Providing & supplying of fabric venetian Window Blinds (Nantucket) as

per the approved sample, consisting of 3" vane size having head rail, rotator rail and bottom

rail made of aluminium alloy 6063-T6 PER ASTM B221 - 85 extruded profile, powder coated

and provided in standard natural white color. The rolling tube should be made up of

aluminium alloy from extruded profile of 34mm dia. The head rail dimensions should be of

suitable size according to the length of head rail and space available and finished with fabric

cover matching with the louver fabric. The cassette should conceal the working mechanism

rotary-clutch. (White polycarbonate spring tempered rotary clutch which raises), lower and

tilts the blinds. White polycarbonate limit assemblies control vane over-rotation, located on

3.16 MR either side of individual blinds. The room darkening fabric of Blind should be of anti-static 380.64 SQM 7475.00 2845284.00

polyester vanes which have facings between two sheer layers (50 mm wide) to reduce glare.

Sheer layers should be of white 100% knit polyester, the colors, textures and opacities as

approved. The fabric shall be made of spun- bonded 100% polyester fiber (having green

guard certification) treated with soil & dust repellent requiring minimum regular interval

cleaning. GREEN GUARD Gold certified for low-emitting products to maintain Indoor

environment. Up to 80% ultraviolet protection with vanes open and 90% with vanes closed.

The shading to be operated by Easy rise mechanism with a continuous cord loop operating

system. All parts, components & hardware are in approved shade as per direction of Engineer-

SCHEDULE OF QUANTITIES - INTERIOR WORKS

DSR 2023 AMOUNT (In Rs.)

S NO DESCRIPTION QUANTITY UNIT RATE

PELMET: Fabricate and install pelmet made of 19mm thick board, up to 300mm high and in

3.17 MR line with external glazing as per details of Architect. Rate to include finishing exposed surfaces 87.84 RM 225.00 19764.00

of the Pelmet with 1mm laminate.

13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to

prepare the surface even and smooth complete

Applying priming coats with primer of approved brand and manufacture, having low VOC

(Volatile Organic Compound) content.

With water thinnable cement primer on wall surface having VOC content less than 50

Removing white or colour wash by scrapping and sand papering and preparing the surface

3.20 13.88 smooth including necessary repairs to scratches etc. complete 25.00 SQM 19.75 494.00

Providing and applying white cement based putty of average thickness 1 mm, of approved

3.21 13.80 brand and manufacturer, over the plastered wall surface to prepare the surface even and 25.00 SQM 156.05 3901.00

smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile

13.83 Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture,

including applying additional coats wherever required to achieve even shade and colour

5.5mm THICK HDHMR BOARD (BOTH SIDE RAW): Providing and fixing in wall lining,

partitions etc. Confirming to ASTM E-84-2021 class1 BOTH side raw, having even grade low

emission, high moisture resistance, fire resistance, borer, termite & fungus resistance, green 1522.80 SQM 504.00 767491.20

3.23 MR material and environmental friendly with necessary fixing arrangement and screws etc. ,

complete as per direction of Engineer-in-Charge

5.5mm thick HDHMR Board

11 mm THICK HDMR BOARD (BOTH SIDE RAW): Providing and fixing 11mm thick

HDHMR board in wall lining, partitions etc. both side raw. Extra density, high moisture

3.24 MR resistance, borer, termite & fungus resistance, green material and environmental friendly with

necessary fixing arrangement and screws etc. Complete

11 mm thick HDHMR Board 1976.40 SQM 1079.00 2132535.60

ALUMINIUM FRAME: Providing and fixing partition, frame work in 50x25x1.5mm Aluminium

Section placed at 600mm centre to centre both ways (horizontal & vertical) fastened to floor,

3.25 MR ceiling and horizontal member. The item includes providing and fixing 50mm thick polyester 1976.40 SQM 1347.00 2662210.80

synthetic insulation as insulation of 100 GSM.

LAMINATE PANELLING: Providing & Fixing decorative high pressure laminated sheet of

plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and

9.127 reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of

adhesive of approved quality.

Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate

made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with

vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters.

3.27 9.136 The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the metre 57 1709.25 97427.25

frame and fixing with dash fastener of approved size and make,

including applying a coat of approved brand fire resistant primer etc. complete as per

direction of Engineer-in-charge (Dash fastener to be paid for separately).

Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating

conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-

in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top

rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating not

less than 120 gm/sqm) duly filled FR insulation material and fixing with necessary stainless

steel ball bearing hinges of approved make, including applying a coat of approved fire

resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid

for separately).

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with

G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/sqm) of

size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and

150 mm c/c , including applying a coat of approved fire resistant primer/ powder coating of

not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc

complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of

Engineer-in-charge

with glass of required thickness having 60 minutes of fire resistance both integrity & radiation

control (EW60) and minimum 20 minutes of insulation (EI20). The manufacturer have to give

test report/certification of fire glass and the glass should have the stamp showing the value of

E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other

accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as

per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing

size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm.

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch &

9.139 Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the each 10 8366.15 83661.5

Engineer- in- charge, all complete.

4 MISCELLANEOUS WORKS

SCHEDULE OF QUANTITIES - INTERIOR WORKS

DSR 2023 AMOUNT (In Rs.)

S NO DESCRIPTION QUANTITY UNIT RATE

1.To carry out Soil investigation followed by analysis and submission of Scheme for

development of structure in coordination with appointed architect followed by vetting from

A qualified professional for the purpose shall be appointed after due

4.01 MR aproval frm Engineer-in-charge. 1.00 LS 1500000.00 1500000.00

2. Preparation of complete set of detailed/shop drawings including finishing, MEP services,

details, design calcualtions etc. and for prepration of as built drawing any other details as and

when desired by Engineer Incharge/ client. A qualified professsional for the purpose shall be

appointed after due appproval from Engineer-In-Charge.

CUSTOMISED STORAGE UNIT: Supply and fixing of full height storage units (upto 450mm

4.02 MR depth) made out of 18mm plywood finished with approved 0.8mm laminate on the inside and 32.40 SQM 26726.00 865922.40

outside. Hardware used of Hettich make.Compleate as per the direction of Engineer in charge

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels,

plates etc., including welding, grinding, buffing, polishing and making curvature (wherever

required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c

4.03 10.28 fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel 1168.80 Kg 772.4 902781.12

bolts etc., of required size, on the top of the floor or the side of waist slab with suitable

arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of

stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,

Painting with synthetic enamel paint of approved brand and manufacture of required colour to

give an even shade :

Two or more coats on new work over an under coat of suitable shade with ordinary paint of

approved brand and manufacture

5 25 STRUCTURE GLAZING

Providing and supplying aluminium extruded tubular and other aluminium sections as per the

architectural drawings and approved shop drawings , the aluminium quality as per grade 6063

T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming

5.01 25.1 to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The 7500.00 Kgs 414.30 3107250.00

item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of

extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of

aluminium extruded section shall be taken for purpose of payment.

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized

5.02 25.2 system of structural glazing (with open joints) for linear as well as curvilinear portions of the

building for all heights and all levels, including

(a) Structural analysis & design and preparation of shop drawings for the specified design

loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times

design wind pressure without any failure), including functional design of the aluminum

sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice

plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone

sealants, flashings, fire stop (barrier)- cum-smoke seals, microwave cured EPDM gaskets for

water tightness, pressure equalisation & drainage and protection against fire hazard

(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5

brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional

movement for achieving perfect verticality and fixing structural glazing system rigidly to the

RCC/ masonry/structural steel framework of building structure using stainless steel anchor

fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of

stainless steel grade 316, of the required capacity and in required numbers.

(c) Providing and filling, two part pump filled, structural silicone sealant and one part weather

silicone sealant compatible with the structural silicone sealant of required bite size in a clean

and controlled factory / work shop environment, including double sided spacer tape, setting

blocks and backer rod, all of approved grade, brand and manufacture, as per the approved

sealant design, within and all around the perimeter for holding glass

(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes,

shapes and profiles, as required as per the site conditions, to seal the gap between the

building structure and all its interfaces with curtain glazing to make it watertight.

(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to

make it watertight, by incorporating principles of pressure equalization, providing suitable

gutter profiles at bottom (if required), making necessary holes of required sizes and of

required numbers etc. complete. This item includes cost of all inputs of designing, labour for

fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and

other incidental charges including wastages etc., enabling temporary structures and services,

cranes or cradles etc. as described above and as specified.

The item includes the cost of getting all the structural and functional design including shop

drawings checked by a structural designer, dully approved by Engineer-in-charge. The item

also includes the cost of all mock ups at site, cost of all samples of the individual components

for testing in an approved laboratory, field tests on the assembled working structural glazing

as specified, cleaning and protection till the handing over of the building for occupation. In the

end, the Contractor shall provide a water tight structural glazing having all the performance

characteristics etc. all complete as required, as per the Architectural drawings, as per item

description, as specified, as per the approved shop drawings and as directed by the Engineer-

Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded

aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof

stainless steel wire mesh shall be paid for separately under relevant items under this sub-

head. However, for the purpose of payment, only the actual area of structural glazing

(including width of grooves) on the external face shall be measured in sqm. up to two decimal

SCHEDULE OF QUANTITIES - INTERIOR WORKS

DSR 2023 AMOUNT (In Rs.)

S NO DESCRIPTION QUANTITY UNIT RATE

Note:-2. The following performance test are to be conducted on structural glazing system if

area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by

NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of

Science & Technologies, India. Cost of testing is payable separately. The NIT approving

authority will decide the necessity of testing on the basis of cost of the work, cost of the test

and importance of the work. Performance Testing of Structural glazing system Tests to be

conducted in the NABL accredited lab or any other accreditation body which operates in

accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025

1. Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to +300pa)

as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr

2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method for

a range up to 2000 ml

3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for

a range upto 2000 m

4. Structural Performance Deflection and deformation by static air pressure test (1.5 times

design wind pressure without any failure) as per ASTME-330-10 testing method for a range

5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for

Qualitative test, Tests to be conducted on site

6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000

Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-

sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as

required and specified, comprising of an outer heat strengthened float glass 6 mm thick, of

approved colour and shade with reflective soft coating on surface # 2 of approved colour and

5.03 25.3 shade, an inner Heat strengthned clear float glass 6 mm thick, spacer tube 12 mm wide,

dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all

complete for the required performances, as per the Architectural drawings, as per the

approved shop drawings, as specified and as directed by the Engineerin-Charge. The IGUs

shall be assembled in the factory/ workshop of the glass processor.

(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.25.2)

For payment, only the actual area of glass on face # 1 of the glass panels (excluding the

areas of the grooves and weather silicone sealant) provided and fixed in position, shall be

measured in sqm.

(i) Coloured tinted float glass 6 mm thick substrate with reflective soft coating on face # 2, +

12 mm Airgap + 6 mm Heat Strengthened clear Glass of approved make having properties as

(i) visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light 750.00 Sqm 3718.70 2789025.00

reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3

W/m2 degree K etc. The properties of performance glass shall be decided by technical

sanctioning authority as per the site requirement.

Extra for openable side / top hung vision glass panels (IGUs) including providing and

supplying at site all accessories and hardwares for the openable panels as specified and of the

approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone

5.04 25.4 locking sets with stainless steel plates, handles, buffers etc. including necessary stainless 37.50 Sqm 3671.50 137681.25

steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural

drawings, as per the approved shop drawings, as specified and as directed by the Engineer- in-

Providing, fabricating and supplying shadow box of required size and shape, for fixing in the

spandrel portion of the structural glazing, in linear as well as curvilinear portions of the

building by providing semi -rigid, inorganic, non-combustible fibre glass wool insulation 50

mm thick, conforming to IS: 8183 and BS: 3958 Part 5. The insulation layer shall have facing

5.05 25.5 (factory bonded on surface # 1 of the fibre glass insulation layer), of black non-woven fibre 240.00 Sqm 2159.65 518316.00

glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm /sqm, made

of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing

1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS

rivets, nuts, bolts, washers etc complete.

Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened

monolithic float glass of approved colour and shade with reflective soft coating on surface # 2

of approved colour and shade so as to match the colour and shade of the IGUs in the vision

panels etc. ,all complete for the required performances as specified, as per the Architectural

5.06 25.6 drawings, as per the approved shop drawings, as specified, and as directed by the Engineer-

in- Charge. For payment, only the actual area of glass on face # 1 of the glass panels (but

excluding the area of grooves and weather silicone sealant) provided and fixed in position,

shall be measured in sqm. (Payment for fixing of Spandrel Glass Panels in the curtain glazing

is included in cost of relevent Item*).“

(i) Coloured tinted float glass 6 mm thick substrate with reflective soft coating on face # 2,

having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal

10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value 240.00 Sqm 2450.15 588036.00

of 3.0 to 3.3 W/m2 K etc. . The properties of performance glass shall be decided by technical

sanctioning authority as per the site requirement.

Add Cost Index @ 103 & Correction Factor @ 0.973 16945617.24

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

S DSR E&M Amount (In Rs.)

DESCRIPTION UNIT QTY RATE

NO 2025 DSR NON-DSR

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single

1.10 core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point

with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5

1.55 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with

1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed

medium class PVC conduit along with 1 No. 4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding

modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 2 136.00 272.00

1.24.5 6 pin 15/16 amp socket outlet Each 2 219.00 438.00

A.5 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. Each 20 47.00 940.00

1.27 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as

Wiring for twin control light point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed

A.7 1.11 medium class PVC conduit, 2way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR Each 10 1803.00 18030.00

PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3

pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6

pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2

A.10 1.56 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in Each 216 757.00 163512.00

non residential buildings).

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single

core cable in surface/ recessed medium class PVC conduit as required.

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 10 373.00 3730.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 10 482.00 4820.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 270 1078.00 291060.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 270 1454.00 392580.00

11.1 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC

C.1 11.1.21 sheathed

X 35 sq. mm aluminium

(32mm) conductor cable of 1.1 KV grade as required. Each 4 437.00 1748.00

Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium Conductor Cables :

Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor armoured cable of 1.1 KV grade conforming to

C x 120 Sqmm/ IS:1554 part-1 respectively & ISI marked.

XLPE cable 1078.00 215600.00

(c ) 3.5 C x 70 Sqmm XLPE cable RM 50 680.00 34000.00

(e) 3.5 C x 35 Sqmm XLPE cable RM 50 378.00 18900.00

C.3 MR Supply of following sizes of copper cables -PVC sheathed PVC/XLPE insulated Copper conductor armoured cable of 1.1 KV grade

(a) conforming to IS:7098

4 C x 16 Sqmm part-1cable

XLPE copper / IS:1554 part-1 respectively & ISI marked. 200 1446.00 289200.00

(b) 4 C x 25 Sqmm XLPE copper cable RM 50 2253.00 112650.00

(c ) 3.5 C x 35 Sqmm XLPE copper cable RM 100 2686.00 268600.00

(d) 3.5 C x 50 Sqmm XLPE copper cable RM 50 3224.00 161200.00

D.1 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. Each 50 14.00 700.00

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of

D.2 following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, MCB in the existing MCB DB complete with connections, testing and

D.3 commissioning etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/

2.4 recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing

D.4 etc. as required. (But without MCB/ RCCB/ Isolator)

MR 12 way (4 + 36), Double door Each 9 9081.00 81729.00

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a

sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete

D.6 2.3 with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.

(But without MCB/RCCB/Isolator)

2.3.3 12 way, double door Each 9 2871.00 25839.00

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding

modular plate etc. as required.

1.24.6 Telephone socket outlet Set 162 168.00 27216.00

1.24.7 TV antenna socket outlet Set 9 168.00 1512.00

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper

braid and protected with PVC sheath in the exisitng surface/recessed steel/ PVC conduit as required

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall

E.3 and making good the same in case of recessed conduit as required.

Supplying and drawing following pair 0.5 mm dia FRLS/HFFR PVC insulated annealed copper conductor, unarmored telephone cable in

the existing surface/ recessed steel/ PVC conduit as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover

plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required.

F.2 5.14 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. MTR 50 1246.00 62300.00

F.3 5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. MTR 50 287.00 14350.00

F.4 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. MTR 100 84.00 8400.00

G PANEL BOARDS

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

S DSR E&M Amount (In Rs.)

DESCRIPTION UNIT QTY RATE

NO 2025 DSR NON-DSR

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and commissioning the following sheet steel cubicle

type panels fabricated from 1.6mm thick CRCA sheet, dust and vermin proof, outdoor type double door with canopy, TPN Panels with

hinged lockable doors fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear access for

cable alley and with segregated bus-bar chamber with tinned aluminium bus bar and including supplying and fixing following

switchgears, meters and accessories, inter-connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram:

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as detailed in the Specifications

Colour: Gray Powder Coated, as per approved sample.

1 nos, 200 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking capacity 25 KA (ICS=ICU up to 433 V)

complete in all respect

TPN aluminum bus bars of minimum of 200 Amps capacity with heat shrinkable colored sleeves and I/C DMC/SMC bus bars supports

at required intervals complete for cross section, size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB - 4 Nos.

(b) 40 Amps, TPN, MCB -4 nos

Panel complete as above Each 3 125000.00 375000.00

Providing and fixing MV danger notice plate of 200mm x 150mm made of mild steel, atleast 2 mm thick, and vitreos enamelled white

on both sides and with iscription in single red colour on front side as required

a) Supply, Installation, Testing and Comissioning of Modular Dectralized architecture True Online Double Conversion UPS with

250KVA Frame and 10 x 25KVA Hot Swappable Power Modules for 225 KVA in N+1 redundant

b) MODBUS for BMS integration

1 c) SNMP for remote monitoring of UPS Each 1 3071754.73 3071754.73

d) Lithium Ion integration feature

e) DC Cable from UPS to Battery Bank ( 10m)

f) Phase sequence correction & protection

Supply, Installation, Testing and Commissioning of Lithium Ion Battery Bank of LFP Type 50AH-40.72KWh-[TP120]-LITHIUM ION

2 BATTERY CABINET Battery Bank for BOL 42min & EOL 32Mins backup with each UPS @ 0.8PF Load condition w.r.t 225 KVA UPS Each 1 4088059.26 4088059.26

capacity Integrated Battery Management System with each battery cabinet for cell level, module level and rack level monitoring.

Supply, Installation, Testing and Commissioning of 20KVA 3PH/3PH True Online Double Conversion UPS

b) MODBUS for BMS integration

c) Lithium Ion Battery Integration Kit

d) DC Cable from UPS to Battery Bank ( 10m)

e) Phase sequence correction & protection

f) Battery breaker with the battery cabinet

Supply, Installation, Testing and Commissioning of Lithium Ion Battery Bank of LFP Type 50AH-10.24KWH-LITHIUM ION BATTERY

4 CABINET (4 Modules) Battery Bank for 30 mins backup with UPS @20KVA @ 0.8PF (16KW) Load condition along with Integrated Each 2 589480.80 1178961.60

Battery Management System with each battery cabinet for cell level, module level and rack level monitoring.

Total of Electrical items 5331055.00 10396876.47

SCHEDULE OF QUANTITIES - FURNITURE WORKS

S. No Type Description Reference Image Unit QTY Rate Amount

MEETING ROOM TABLES

MEETING ROOM TABLE :- Fabrication, Supply & Installation of the meeting room table with the following specifications

Table top finish The board in 25mm thickness with wooden / solid laminate finish. The 2mm ABS edgeband colour matches with surface finishing. Every workstation will have a rounded corner / square edge. Rate

MEETING ROOM TABLES inclusive of cutout for cable cubby & MEP requirement. & Flip top box as per the drawings

SIZE - 2400W X 900D X Below table top finish & supports

725HT Combination of metal anthracite / coloured beams and legs ( inset A shape ) to form table. Cable management is mounted on the understructure and is completely concealed. Table to have a cable uptake with a

separator to carry data and electrical cables. Levellers to be considered in the cost.

Cable Management

The cables riser for each cubby need to considered from floor outlet through the vertical riser cover on the leg, and feed cable tray/cable box/cable holder ( approved color anodizing as per understructure ). Cable

trays are mounted onto the understructure below the worktop as per the rquired size basis selected cubby box

The understructure should have a inermediate leg with vertical riser cover for both electrical and data cables running in separately defined compartments and with provisions for access in case of maintainence &

repair. This vertical riser shall carry cables from floor upto Table & these will be in metal for larger tables. The understructure should also have a horizontal cable tray for both electrical and data cables running in

separately defined compartments and appropriate space for mounting the face plates . The ends of this cable tray should also be easily accesible for maintenance purpose.

All worksurfaces have straight edge & round edge options. The front and side edge allows the chamfer feature.

The core board is an E1 particle board with 25mm thickness, while all chamfered edge worktops have MDF in the core. The surface material can be specified as either Melamine or High-pressured laminate.

Understructure Leg Design :

All Byne legs are made of either 2.5 mm thick sheet (metallic). It can support worksurface in three depths: 600, 700 & 800mm unless specified otherwise. All fixed height legs come with adjustable glides that allow

leveling adjustment from 725-750 mm (from floor to desk-tops). All the legs are available for Back-to-Back (BTB) and Single Side (SS) options, SS comes with left-hand (LH) and right-hand (RH) options.

• Material: Imagine the Axis end leg is made of 2.0mm thickness 30x60 square tube welded metal brackets.

• Color: The leg surface finish could be any color out of the standard powder coating color.

• BDHLILB: It is for back-to-back applications.

• BDHLILSLH/RH: It is for single-side applications and is available in LH and RH as options.

• BDHCIL B/S: Its side cover is made of a 1.2mm thick metal sheet and offers color options. It is for both single-side and back-to-back applications.

2 Workstations

• BDHL IM/IA B/S: Imagine leg (Fascia) comes in two alternative materials: metal and acrylic. The acrylic option allows for a clean and frosted surface. It is for both single-side and back-to-back applications.

Mid Leg and Cover - Material: All mid legs are made of 2.0mm thick 30x60 tube welded metal brackets.

Beams and Bridgres - Material and color: All Byne beams are made of cold-rolled rectangular tubes measuring 30mmx40mm, with 2mm wall thickness. It provides 1200/1400/1500/1600/1800 in width to connect

end leg to end leg or end leg to mid leg. The beam finish could be any color out of the standard powder coating color.

Desk-up frameless screen provides multiple material types, fabric, and writable glass as options. The fabric screen provides a trackable

and pinnable option with a softcore inside for Pin function. All the desk-up frameless screens share the aluminum bracket to fix and connect to the understructure.

Cable Management : Provision of Switch sockets on the trench alligned at the centre of Workstation with a provision in metal or PET construction. Inside, sockets can be securely mounted to pre-cut hardware and

smart straps keep cords tidy and compact.

• BDWTB: Deep Cable Holder is made of a 1.0 mm thick SPCC metal sheet. It is specified for Back-to Back configuration, which is fixed length and compatible for all worksurface.

It is regarded as part of the structural elements. Byne standard power socket mounting plate is not compatible with the Light cable tray.

MEETING ROOM TABLE :- Fabrication, Supply & Installation of the meeting room table with the following specifications

Table top finish The board in 25mm thickness with wooden / solid laminate finish. The 2mm ABS edgeband colour matches with surface finishing. Every workstation will have a rounded corner / square edge. Rate

inclusive of cutout for cable cubby & MEP requirement. & Flip top box as per the drawings

Below table top finish & supports

Combination of metal anthracite / coloured beams and legs ( inset A shape ) to form table. Cable management is mounted on the understructure and is completely concealed. Table to have a cable uptake with a

BOARD ROOM TABLE

separator to carry data and electrical cables. Levellers to be considered in the cost.

Cable Management

The cables riser for each cubby need to considered from floor outlet through the vertical riser cover on the leg, and feed cable tray/cable box/cable holder ( approved color anodizing as per understructure ). Cable

trays are mounted onto the understructure below the worktop as per the rquired size basis selected cubby box

The understructure should have a inermediate leg with vertical riser cover for both electrical and data cables running in separately defined compartments and with provisions for access in case of maintainence &

repair. This vertical riser shall carry cables from floor upto Table & these will be in metal for larger tables. The understructure should also have a horizontal cable tray for both electrical and data cables running in

separately defined compartments and appropriate space for mounting the face plates . The ends of this cable tray should also be easily accesible for maintenance purpose.

This chair has an upholstered seat cushion with a suspension back. It has a 5-star base and two pneumatic height adjustment range options. The polymer back frame, seat pan, upholstered shell, arms, arm pads and

tilt controls are available in black finish. The task chair has an adjustable seat depth with 70mm range. The task chair tilt options include a synchronous with tilt limiter/lock. The tilt limiter allows the user to set tilt

range to limit the amount of recline. Arm are height-adjustable arms with 100mm vertical range.

The TriFlex™ polymer back is constructed of a Y-shaped glass filled nylon spine. The spine has three steel threaded press-fit inserts for attachment to the tilt. A polypropylene back shell with ergonomic contours and

perforations attaches to the spine at three locations. Two pockets in the upper back shell encapsulate the ends of the Y-shaped spine. Two 6mm thread forming screws tap into glass filled nylon caps that are press fit

into the polymer back. The back shell connects to the lower spine using two M6 thread forming screws.

The contoured seat pan is constructed of molded nylon and supports the molded polyurethane seat foam with carrier inside. The foam has a nominal 38mm – 64mm thickness with waterfall edges. Fabric is applied

non-bonded. When chairs are refurbished, the complete seat foam and carrier assembly can be replaced.

HEAD CHAIR FOR CABINS

VERUS WITH HEADREST

Fabric for the seat shall be attached without bonding, but with carrier inside the foam application. Fabric shall be staple attached to the carrier. The carrier attaches to seat pan via 4 screws and snap-fit.

The height adjustable arms have a 2-piece telescoping, T-style arm pad support. Both pieces are glass-filled with nylon and finished to match. A combination of washers and 1 bolt through the seat frame attach the

arm to the seat.

The Self-adjusting tilt mechanism is constructed of a die cast aluminum housing, powder coated black. A stamped steel back attachment bracket is pivotally connected to the housing via steel pins and bushings and

is connected to a glass-filled nylon seat bracket. The back attachment bracket is pre-tensioned with a steel coil spring. A multi-position tension adjustment is constructed of a glass-filled nylon knob that is press fit

onto a steel shaft shall extend out from the right side of the tilt. The steel shaft drives a gear and link mechanism that controls the torque output of the tilt.

The pneumatic seat-height-adjustment mechanism is housed within a steel tube. The tube slides and rotates in a bushing within the steel base weldment. The top end of the tube is pressed into the tilt mechanism

and the lower end is inserted into the 5- star base. The outside of the pneumatic tube is coated black. The 5-star base has a glass filled nylon construction with a matching color to the frame.

10 Digitally signed by RAJ PAL

S. No Type Description Reference Image Unit QTY Rate Amount

The separate seat and back shall be a durable, breathable Pellicle material stretched within a carrier ring and fitted into an outer frame. The Pellicle material shall be a woven blend of colored polyester yarn with

Hytrel elastomeric polyester of various stiffness, which is a high-performance polymer. It shall support and distribute the user’s weight through zonal stretching including more support in the front zone and reduced

support around the IT’s. The back has a high tension upper zone and lumbar zone with reduced pressure in the PSIS region and the scapula, and shall retain its original shape when the chair is unoccupied.

The carrier ring shall be a glass-filled elastomeric copolymer molded around the perimeter ofthe Pellicle material to frame and support it. The outer frame shall be injection-molded, glass-filled nylon. The ring and

frame shall be secured together with screws. The back of the outer frame shall have molded-in rails to accept the optional PostureFit, PostureFit SL and lumbar pad.

The chair base shall house a unitized pneumatic seat height adjustment mechanism contained in 2 steel tubes; an inner tube shall slide and rotate in an acetal bushing within an outer tube. The outer tube shall be

VISITOR CHAIR FOR

coated black and shall have a tapered end that will be pressed into the base and an upper end that shall be pressed into the tilt mechanism.

WORKSYATIONS CHAIR

The tilt mechanism shall contain 2 fiberglass leaf springs, a nylon gear-driven tension adjustment and a die-cast aluminum front and rear housing with either a polished, smooth or wrinkle-coat powder-coat epoxy

finish. A 3-piece ABS cover shall snap together to enclose the mechanism.

The PostureFit SL support shall have a glass-filled polypropylene “wishbone” frame and cover, a 4 1/2”-high x 3 3/8”-wide sacral pad and 4 7/8” high x 4 1/8” wide lumbar pad of rigid ABS plastic and polyurethane

foam. The sacral and lumbar pads are snap fit to an impact modified nylon stem.

The lumbar pad shall be a nylon bow with integral attachment clip features on each side. A flexible Hytrel strap shall be stretched across the width of the lumbar bow, connecting with a hook and loop. A 5 ½” high x

4 ¼” wide support pad made of nylon snaps to the center of the strap with 4 snaps.

All worksurfaces have straight edge & round edge options. The front and side edge allows the chamfer feature.

The core board is an E1 particle board with 25mm thickness, while all chamfered edge worktops have MDF in

the core. The surface material can be specified as either Melamine or High-pressured laminate. All worksurfaces

have a cable management cut out option.

Understructure Leg Design :

All Byne legs are made of either 2.5 mm thick sheet (metallic). It can support worksurface in three depths: 600, 700 & 800mm unless specified otherwise. All fixed height legs come with adjustable glides that allow

leveling adjustment from 725-750 mm (from floor to desk-tops). All the legs are available for Back-to-Back (BTB) and Single Side (SS) options, SS comes with left-hand (LH) and right-hand (RH) options.

• Material: Imagine the Axis end leg is made of 2.0mm thickness 30x60 square tube welded metal brackets.

• Color: The leg surface finish could be any color out of the standard powder coating color.

• BDHLILB: It is for back-to-back applications.

• BDHLILSLH/RH: It is for single-side applications and is available in LH and RH as options.

• BDHCIL B/S: Its side cover is made of a 1.2mm thick metal sheet and offers color options. It is for both single-side and back-to-back applications.

• BDHL IM/IA B/S: Imagine leg (Fascia) comes in two alternative materials: metal and acrylic. The acrylic option allows for a clean and frosted surface. It is for both single-side and back-to-back applications.

Mid Leg and Cover - Material: All mid legs are made of 2.0mm thick 30x60 tube welded metal brackets.

4 Beams and Bridgres - Material and color: All Byne beams are made of cold-rolled rectangular tubes measuring 30mmx40mm, with 2mm wall thickness. It provides 1200/1400/1500/1600/1800 in width to connect NOS 1 ₹ 223,440.00 ₹ 223,440

end leg to end leg or end leg to mid leg. The beam finish could be any color out of the standard powder coating color.

Understructure Leg Design :

All Byne legs are made of either 2.5 mm thick sheet (metallic). It can support worksurface in three depths: 600, 700 & 800mm unless specified otherwise. All fixed height legs come with adjustable glides that allow

leveling adjustment from 725-750 mm (from floor to desk-tops). All the legs are available for Back-to-Back (BTB) and Single Side (SS) options, SS comes with left-hand (LH) and right-hand (RH) options.

• Material: Imagine the Axis end leg is made of 2.0mm thickness 30x60 square tube welded metal brackets.

• Color: The leg surface finish could be any color out of the standard powder coating color.

• BDHLILB: It is for back-to-back applications.

• BDHLILSLH/RH: It is for single-side applications and is available in LH and RH as options.

• BDHCIL B/S: Its side cover is made of a 1.2mm thick metal sheet and offers color options. It is for both single-side and back-to-back applications.

• BDHL IM/IA B/S: Imagine leg (Fascia) comes in two alternative materials: metal and acrylic. The acrylic option allows for a clean and frosted surface. It is for both single-side and back-to-back applications.

Mid Leg and Cover - Material: All mid legs are made of 2.0mm thick 30x60 tube welded metal brackets.

Beams and Bridgres - Material and color: All Byne beams are made of cold-rolled rectangular tubes measuring 30mmx40mm, with 2mm wall thickness. It provides 1200/1400/1500/1600/1800 in width to connect

end leg to end leg or end leg to mid leg. The beam finish could be any color out of the standard powder coating color.

Cable Management : Provision of Switch sockets on the trench alligned at the centre of Workstation with a provision in metal or PET construction. Inside, sockets can be securely mounted to pre-cut hardware and

smart straps keep cords tidy and compact.

2 SEATER SOFA- 1380mm X 690mm X 770 mm HT

Model: Sabha Collaborative Seating

Sabha is the ultimate soft-seating system. Designed to be lightweight, low and open-

platform. It can be configured in myriad ways.Benches, one-, two- and three-seater options,built-in surfaces and functional occasional items can come together to create the ideal counterbalance to personal

2 SEATER SABHA SOFA FOR workstations, thus supporting collaboration, naturally.

CABIN TABLE The sofa frame made with solid wood and MDF with nozag spring system with structure padding of High-resilient, variable density, polyurethane foam The seat cushion is made up with High-resilient, polyurethane

seat cushion with a wrap of fibre-fill.Understucture is made of powdercoated steel.

Warranty: 12-year limited warranty, 5-year guarantee to the fabrics and foam

Eco-Labels & Certificates Forest Stewardship Council™ (FSC-C028824), Bifma X 7.1, CDPH 01350

Strength, Durability & Stability Certificates: BIFMA X5.4 — Lounge & Public Seating, EN 1022 Furniture, EN 16139-L2 Furniture

11 Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: LIGHTING FIXTURES

S No Description Unit QTY RATE DSR Amount NDSR Amount

SITC of Pendent luminaire with HPE (High Performance Efficiency) LED (Light Emitting Diode), system

power: 28W in continuos cascading effect, Luminous flux of luminaire 3080 lm, 110 LM/W system

efficacy, colour temperature of 4000 K, neutral white, CRI > 90, THD<5%, SDCM 3, 230V constant

current driver, 70% of luminous flux after 50,000 operating hours, Energy efficient LEDs, Direct light

emission, Luminaire profile in aluminium, Polyester powder aluminium white coloured coat applied over

a 5- stage pre-treatment, opal prismatic diffuser for a homogenous light distribution ZHLS(ZERO

HALOGEN LOW SMOKE) internal wiring, integral electronic control gear, Protection class I, IP 40, L =

LED Down lighter (COB Type) (System lumen efficacy ≥120 lm/Watt ) Supplying, Installation, Testing &

Commissioning of LED Recessed/surface Down lighter (Round / square/ Rectangular) COB Type of

following body material and construction as per IS : 10322 with driver as per the requirement with

Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -

5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P.

F.≥0.95, IP20, CRI >80 , UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5 %), life

time (LED, Driver & electrical circuitry), life time of minimum 50000 Burning Hours with, 70% of initial

Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),

SDCM(Standard Deviation Colour Matching)<3, Maximum power consumption should not more than

2 8.1 the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name

Engraved/Embossing/ Screen printing on housing. OEM must have its own in house NABL lab

setup for all testing facilities for LED fixtures. "complete in all respect i/c external connections

with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as

required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output .

LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted

Shape size and CCT shall be as approved by Engineer-inCharge as per requirement. (Thermal

management: heat sink of aluminium housing such that LED junction temperature shall not rise

above 90°C). Powder coated die cast /Extruded aluminium Body including trim with Aluminium

SCHEDULE OF QUANTITIES: HVAC

S No Description Unit Quantity Rate DSR Amount NDSR Amount

VRF OUTDOOR UNIT: Supply, Installation, Testing & Commissioning of Modular type Variable

Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling/heating having

100% hermetically sealed inverter type twin Rotary/Scroll Compressor(s),minimum two compressors

(with individual separate PCB) for above 14HP modules, microprocessor based Controller, top discharge

type condensing unit(s), with R-410-A Refrigerant or equivalent, vibration Isolators with suitable

foundation etc. complete as required. To have better efficiency condenser fan shall be capable to operate

at different speed with respect to load. The unit shall deliver the rated capacity and in confirmation as

per IS 18728:2024 and CPWD Specifications and work even at 50°C ambient temperature without

tripping. The system shall be able to deliver 100% of the rated capacity upto 39 Degree Celcius.The unit

1 31.3 shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply and BMS compatible. The unit

shall be filled with first charge of the refrigerant and ready for use as required. The condenser should be

coated with a hydrophilic film to prevent water accumulation on the surface of the heat exchanger,

enhance water dispersion, and reduce the risk of degradation, thereby improving overall performance and

durability. The Indian Seasonal Energy Efficiency Ratio (ISEER) of the unit shall be as per Energy

Conservation and Sustainable Building Code (ECSBC) 2024 as below and complete as per CPWD

specification, connections, inter connections etc. as required. (For capacity <40 kWr ISEER 7.4, Capacity

> 40 and <70 ISEER 7.5, Capacity > 70 ISEER 7.6 for Super ECSBC Building)

For Cooling or Heating or Both

VRF INDOOR UNITS: Supply, Installation, Testing and Commissioning of following minimum capacity High

wall type Indoor unit equipped with and comfort washable synthetic media pre-filter, fan section with low

noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic

expansion valve, outer cabinet, cord less remote control, drain pan, necessary accessories etc., suitable

for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required. The Indoor units

must shut down upon receiving a singal from the BMS System/Fire Singnals. The system shall be capable

to adjust air flow as per room requirement automatically. The cooling capacity of indoor unit will be at air

inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. (Make will be same as of Outdoor)

Supply, Installation, Testing and Commissioning of following minimum capacity Single way wall/corner

VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter,

fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX

Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration

3 31.6 Isolation, Corded remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC

supply,complete, as required. The Indoor units must shut down upon receiving a singal from the BMS

System/Fire Signals. The system shall be capable to adjust air flow as per room requirement

automatically. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19

Degree C WB temperature. (Make will be same as of Outdoor)

INDOOR UNIT Supply, Installation, Testing and Commissioning of following minimum capacity 4 way

Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section

with low noise fan /dynamically balanced blower, multispeed motor, coil section with DX Copper coil,

electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration Isolation,

Corded remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply,

complete, as required. The Indoor units must shut down upon receiving a singal from the BMS

System/Fire Signals. The system shall be capable to adjust air flow as per room requirement in auto

mode. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree

Supply, Installation, Testing and Commissioning of Y/T/Multi Joints. Joints shall be of same

Original Equipment Manufacturer (OEM) make as of ODUs and IDUs

b 31.13.2 Outdoor Multi Joint Nos 9 8,098.00 72,882.00

REFRIGERANT PIPING:

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following

nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings,

6 31.14 with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with

XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves

sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as per

specifications etc. as required:

a 31.14.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Metre 360 256.00 92,160.00

b 31.14.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Metre 1350 346.00 467,100.00

c 31.14.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Metre 360 487.00 175,320.00

d 31.14.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Metre 1350 615.00 830,250.00

e 31.14.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Metre 200 739.00 147,800.00

f 31.14.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Metre 200 904.00 180,800.00

g 31.14.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Metre 150 1,068.00 160,200.00

h 31.14.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Metre 150 1,157.00 173,550.00

i 31.14.9 31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm Metre 75 1,222.00 91,650.00

j 31.14.10 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm Metre 75 1,286.00 96,450.00

k 31.14.11 38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm Metre 50 1,322.00 66,100.00

l 31.14.12 41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm Metre 50 1,368.00 68,400.00

a MR 300x75mm outdoor cable tray with cover (hot dip galvanized) Metre 150.00 1,439.00 215,850.00

DRAIN PIPING For VRV HVAC

12 Providing and fixing of uPVC/cPVC/PVC drain pipe

CONTROL CABLING

Supplying, receiving, storing, laying, effecting proper connections, testing and commissioning of the

13 following sizes of 1.1 KV grade PVC insulated copper conductor unarmoured stranded control cable

complete as required.

a MR 2C x 1.5 mm² Cu (Communication cable from ODU to IDU for VRF units) Metre 1740 274.00 476,760.00

SCHEDULE OF QUANTITIES: FIRE DETECTION AND ALARM SYSTEM WITH PUBLIC ADDRESS AND 2-WAY COMMUNICATION

DSR (E&M) Amount (In Rs.)

S No 2025 Description of Items Unit QTY Rate

Code No DSR Non-DSR

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal

1 28.2.4 detector with in-built isolator complete with mounting base complete as required. Each 68.00 3004.00 204272.00

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box

having two LED, metallic cover complete with all connections etc as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with

4 28.2.9 rate of rise cum fixed temperature thermistor having in-built isolator complete with base as Each 10.00 2866.00 28660.00

Supplying, installation, testing & commissioning of addressable fire control module complete as

Supplying, installation, testing & commissioning of addressable phone control module complete as

Supplying, installation, testing & commissioning of addressable manual call point complete as

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers

complete as required.

Supplying, installation, testing and commissioning of digital audio amplifier 75 watt, 25V rms

operating at 240 Volt AC Supply complete as required

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed

12 28.5.2 copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath Each 680.00 192.00 130560.00

complete as required.

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and

accessories like coupler etc. as required.

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing

14 28.5.3 surface / recessed steel conduit of following pairs, cores and size including connections and

interconnections etc. as required.

(a) 28.5.3.1 Speaker cable Single pair, 2-core, 1.5 sqmm Mtr. 540.00 61.00 32940.00

SAFETY SIGNAGE:Providing and fixing of photo luminiscent/visual markers signage made out of

photo luminiscent, produced luminization with suitable colours combination (Glow in dark) with

high intensity luminious properties covered with U/V statilized coating having following features

complete as required.

(a)Thickness of aluminium/ACP sheet 2.00 mm ±10%

(b)Service temperature - 40 C to 120 C

(c)Suitable for indoor surface, glow visibility for more than 8 hrs in total darkness.

One sided signage written in English and also in regional Language,if required, for the below

15 MR dimension Fire Safety Signages.

Signage printed with the above stated specification for (i)

"NO SMOKING" with board size 4" x 12" at suitable point,

(ii) Floor indentification signage with board size 4"x12" at suitable point,

(iii) Exit signage board size 4"x12" at suitable point,

(iv) Colour signages for " EVACUATION MAP OF EACH FLOOR" with board size of 18"x24" at Sq. inch 5760.00 18.00 103680.00

suitable point, (v)Lift Alert with board size 8'x12' at suitable point,

(v)the signages of " FIRE ORDER" with the board size of 24"x36" at main exit/entry (Gr. Floor)

Supply,Installation,Testing & Commissioning of Carbon-di-oxide type fire extinguishers with

capacity of 4.5 Kg.consisting of welded M.S.cylindrical body, internal discharge tube, discharge 9.00 9278.00

nozzle, suspension bracket, conforming to IS:15683, finished externally with red enamel paint and

fixed to wall with brackets complete with internal charges.

Supply,Installation,Testing & Commissioning of Dry chemical powder type fire extinguishers of

capacity of 6 Kg consisting of welded M.S cylindrical body, internal discharge tube, discharge 9.00 4215.00

nozzle,suspension bracket, conforming to IS:15683, finished externally with red enamel paint and

fixed to wall with brackets complete with internal charges.

Supply,Installation,Testing & Commissioning of "ABC Powder Automatic (Nitrogen) Type Fire

18 MR Extinguishers" of capacity 5 Kg shall confirm IS:15683 & IS:14609 with initial fill & all mounting Each 9.00 8732.00 78588.00

accessories etc.complete.

Supply,Installation,Testing & Commissioning of Foam type fire extinguishers of capacity 9 Ltr.

consisting of welded M.S. cylindrical body,discharge nozzle, suspension bracket, conforming to

19 MR IS:15683 finished externally with red enamel paint and fixed to wall brackets complete with Each 9.00 4377.00 39393.00

internal charges.

SCHEDULE OF QUANTITIES: IP Based CCTV System

S NO DESCRIPTION Unit QTY RATE

2025/MR NON-DSR

Supplying Installation Testing and Commissioning of 5/6MP IP IR Dome Camera having following specifications and features etc :-

1)Type of Camera: Dome Camera 2) Image Sensor: 1/2.8" or better progressive Scan CMOS get color image even at night condition 3) Signal System: PAL/NTSC 4) Minimum Illumination: 0.008Lux@ F1.4,

AGC ON, 0 lux with IR or better 5) Imaging: 1/3s to 1/30000s Shutter Support, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking. 6)

On Screen Display: Camera should display Camera title, Date & Time in live & recorded video both. 7) Signal to Noise Ratio: > 50 dB 8) Day & Night: True Day & Night High Performance Mechanical IR cut

filter with auto switch, IR Source Inbuilt IR LED's with effective distance upto 50 Mtrs integrated IR 30 Mtrs for colour view in night. 9) Video Compression (Minimum): H.265 or better, Audio:- G.711U/A,

G.711Mu, G.726, AAC, G.723 10) Wide Dynamic Range: WDR (120dB or more) 11) Digital Noise Reduction: DNR (2D/3D) On/Off 12) Streaming: Triple streaming, configurable 13) Video Streaming & Frame

Rates: Triple streaming , configurable Main stream: 5/6MP @25/30 fps, Sub streams: D1@25/30 fps or better 14) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through

client software or web browser 15) Profile Management: User configuration import, export 16) Security: User Authentication, Water Marking 17) Onboard Storage: Camera should support built-in Micro

1 40.5 SD/SDHC/SDXC Card slot upto 512 GB. It should be supplied with minimum 128GB memory Card. 18) Recording Management: Format SD, overwrite, storage management, video to NAS device, 19) Edge

Analytics : Tripwire, Intrusion, Motion Detection 20) Alarm Trigger : Motion/tampering detection;network disconnection detection; IP conflict detection; memory card state detection; memory space detection

21) Alarm Support: It should have 1/1 Alarm In/ Out Port 22) Audio Support: It should have 1x Built-In Mic and 1/1 Audio In/ Out Port for external Mic. and Speaker (As per site requirement) with

G.711U/A/ G.711Mu/ AAC/ G.726 audio compression 23) Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast,

24) System Capability: ONVIF 25) VMS: Camera shall support open source VMS 26) Cyber Security: trusted boot, AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security logs,

, account lockout, video encryption, IP/MAC filtering, HTTPS, trusted upgrade. 27) Ethernet: 1 RJ 45 10/100 Ethernet port 28) Power Input: The camera should support simultaneous dual power input—12

VDC (via power adapter) and PoE—to ensure continuous operation in the event of a failure in one power source. 29) Power Requirement: 12VDC/24VDC/PoE (802.3af)/ePoE 30) Enclosure: IP67 weather

proof, IK10 31) Operating Condition: Ambient Temperature:- (-) 05°C to 50°C, humidity 95% (max) (non-condensing) 32) IR life: 40000 hours or higher 33) Video Bit rate: 32 KBPS - 8 MBPS or better

34) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS

1.1 40.5.2 5MP/6MP IP IR 2.7 to 4 mm ~12 to 13.5mm or better Varifocal Motorized lens Dome Camera. Nos. 18 26,993.00 485,874.00

Supplying Installation Testing and Commissioning of

5MP/6 MP IP IR Bullet Camera having following

specifications, type of lens and features etc :-

1) Type of Camera: Bullet Camera 2) Image Sensor: 1/2.8" or better progressive Scan CMOS get color image even at night condition 3) Signal System: PAL/NTSC 4) Minimum Illumination: 0.006Lux@

F1.4, AGC ON, 0 lux with IR or better 5) Imaging: 1/3s to 1/30000s, Auto Gain Control ,White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking. 6) On Screen

Display: Camera should display Camera title, Date & Time in live & recorded video both. 7) Signal to Noise Ratio: > 50 dB 8) Lens Type & Focus: as given below. 9) Day & Night: True Day & Night High

Performance Mechanical IR cut filter with auto switch, IR Source Inbuilt IR LED's with effective distance upto 50 Mtrs integrated IR and 30 Mtrs for colour view in night. 10) Video Compression (Minimum):

H.265 or better, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723 11) Wide Dynamic Range: WDR (120dB or more)+C9 12) Digital Noise Reduction: DNR (2D/3D) On/Off 13) Streaming: Triple streaming,

configurable 14) Video Streaming & Frame Rates: Triple streaming configurable Main stream: 5MP/6MP @25/30 fps, Sub streams: D1@25/30 fps or better 15) Image Setting: Rotate Mode, saturation,

2 40.6 brightness, contrast, sharpness adjustable through client software or web browser 16) Profile Management: User configuration import, export 17) Security: User Authentication, Digital Water Marking 18)

Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 512 GB. It should be supplied with minimum 128GB memory Card. 19) Recording Management: Format SD, overwrite,

storage management, video to NAS device,20) Edge Analytics: Tripwire, Intrusion, Motion Detection 21) Alarm Trigger : Motion/tampering detection; network disconnection detection; IP conflict detection;

memory card state detection; memory space detection 22) Alarm Support: It should have 1/1 Alarm In/ Out Port 23) Audio Support: It should have 1x Built-In Mic and 1/1 Audio In/ Out Port for external

Mic. and Speaker (As per site requirement) with G.711U/A / G.711Mu/ AAC/ G.726 audio compreesion 24) Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS,

UDP, ICMP, SSL, DHCP, SMTP, RTSPS,unicast, 25) System Capability: ONVIF 26) VMS: Camera shall support open source VMS 27) Cyber Security: trusted boot, AES 256-bit Encryption,Configuration

encryption, trusted execution, Digest, security logs, account lockout, ,video encryption, IP/MAC filtering, HTTPS, trusted upgrade. 28) Ethernet: 1 RJ 45 10/100 Ethernet port 29) Power Input: The camera

should support simultaneous dual power input—12 VDC (via power adapter) and PoE—to ensure continuous operation in the event of a failure in one power source. 30) Power Requirement: 12VDC/24V

DC/PoE (802.3af)/ePoE 31) Enclosure: IP67 weather proof, IK10 32) Operating Condition: Ambient Temperature:- ()05°C to 50°C, humidity 95% (max) (non-condensing) 33) IR life: 40000 hours or higher

34) Video Bit rate: 32 KBPS - 8 MBPS or better 35) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS

2.1 40.6.2 5MP/6MP IP IR 2.7 to 4 mm ~12 to 13.5mm or better Varifocal Motorized lens outdoor Bullet Camera. Nos. 3 26,993.00 80,979.00

Supplying Installation Testing and Commissioning of following Channel Network Video Recorder (NVR) with camera licenses to record for all channels having specifications and features etc as mentioned

1) Network Video Recorder Embedded/ Installed OS (Linux) along with Camera Licenses to record per NVR and to provide a live view, storage and simultaneously Multi-channel playback of all IP camera or

more and must be ONVIF with minimum support of 384 Mbps incoming Bandwidth.2) NVR should support video compressions : H.265 or better, H.264, MJPEG.3) Must support 1 channel RCA Input, 2 channel

RCA Output for Two-way Talk with G.711U/A, G.711u, PCM, G726 audio compressions.4) Intelligent auto power on when power resumes after power outage.5) Storage: It should support minimum 8 SATA

Slots with 20TB capacity/ Slot and RAID support of RAID 0/1/5/6/10.6) Connectivity Interface : 2 Nos. x 10/100/1000 Mbps Ethernet Ports, 1x RS485, 1x RS232, 1x eSATA Port 7) Backup Interface : Its

should have 4 Nosx USB port (2x USB3.0, 2xUSB2.0) 8) Video Output Ports: 2x HDMI and 2 VGA 9) Alarm Ports: It should have 16/8 Ch In/ Out ports to connect various type of external sensors and output

devices like hooter/ Siren etc.10) Email & SMS Altert options: Option for SMS/ Email Alerts to minimum 5 designated mobile number for power failure, HDD failure, vandalism, tempring, network

disconnection and panic 11) Web & Mobile Application: Web, Mobile app (For iPhone, iPad, Android Phone) for alerts and viewing.12) Protocols: HTTP, HTTPS, TCP/IP, IPv4/IPv6, UDP, DHCP, DNS, SMTP,

UPnP, IP Filter, PPPoE, FTP, DDNS, Alarm Server, IP Search, Multicast, Auto Registration, ONVIF (Profile T, Profile S, Profile G), CGI, SDK and OEM Cloud for remote monitoring without any public IP need.13)

Standards: CE, FCC, RoHS, BIS Certified 14) Power Supply : Should support AC100-240V, 50/60Hz Power supply.15) Operating Condition: -5°C to 50°C, humidity 90% (max) (non-condensing)16) The VMS

application shall support all the features & functionalities of the offered cameras.

17) VMS should consist Licenses for all channels to record Cameras with General, motion detection, intelligent, alarm and POS recording modes. VMS should be provided with Camera Licenses, with no

dependency of VMS licenses by binding with the MAC address of the cameras to achieve the functionality.18) The NVR OEM shall be responsible for providing a mobile application compatible with both

Android and iOS devices, enabling remote monitoring and playback of cameras/NVR footage.19) The OEM must provide its own DDNS server hosted in India, eliminating the need for a public IP address for

3 40.11 remote monitoring over the Internet.

20) Must support Continuous, Alarm, Motion, Instant, Panic Recording Mode 21) It should support Resolution: 32MP; 24MP; 16MP; 12MP; 8MP; 5MP; 4MP; 1080p; 720p; D1; CIF; QCIF 22) When alarm

recording is enabled and an event occurs, you can click the alarm icon on monitoring page to view the alert details. The snapshot function is supported on monitoring and playback page 23) The Network

Video Recorder (NVR) shall be configured to send email whenever a system message is created or an alarm event occurs. The email server shall be a valid SMTP server. Each recipient email address shall be

configured to receive any combination of critical, warning, or informational messages or alarm notifications. When an alarm occurs, the email message includes the NVR name, time of alarm and a list of

camera that is configured to record upon alarm

24) It should have Web and GUI interface. 25) Built-In Artificial Intelligence: NVR should have built-in AI: - 2 Channel face detection and recognition, - Minimum 4 Channel perimeter protection, - Minimum

Smart Motion Detection 26) Face Recognition Database Capacity: It should support total Blacklist and Whitelist capacity of Minimum 20,000 Faces or more with Face Detection speed of 12 face images/sec

and facility to add Name, gender, birthday, address, credential type, credential No., countries & regions and state to each face image. 27) Face & Human Attributes Search: Search Pictures/ Video by Gender,

age group, glasses, expressions, face mask, beard, Top color, top type, hat, bag, age, gender and umbrella. 28) ANPR Capability: It should support ANPR Camera with License plate, plate color, vehicle body,

vehicle model, vehicle logo, calling, seatbelt, vehicle registration location etc vehicle attributes. 29) Alarm Notifications based on: Motion detection, video tampering, video loss, scene changing, PIR alarm,

Camera external alarm, Face detection, face recognition, perimeter protection (intrusion and tripwire), ANPR, people counting, stereo analysis, crowd distribution, heat map, Disk Full, Storage Error, IP

Conflict and abnormal behavior of fan, cybersecurity exception 30) Alarm Notification should be linked with Recording, snapshots, Camera external alarm output, buzzer, logs, presets and email. 31) General

AI Based Search: Search Pictures by channel, time, event type, target classification (Fall Detection, People Approach Detection, People No. Exception Detection, People Staying Detection, Violence Detection.

32) Smart playback function: Should support smart search for the selected area in the video and smart playback to improve the playback efficiency 33) VCA (Video Content Analytic): Should support multiple

3.1 40.11.1 32 Channel Network Video Recorder (NVR) having display split :- Main screen: 1/4/8/9/16/25/32(36), 2nd screen: 1/4/8/9/16 Nos. 1 64,784.00 64,784.00

Supplying, Installation, Testing and Commissioning following capacity Serveillance grade Hard Disk with upto 256MB/s Transfer Rate, 256 MB Cache, 7200 RPM Disk Speed, 3.5 inch form factor, SATA

Interface, BSMI, ICES-003/NNB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL Certifications.

SCHEDULE OF QUANTITIES: FIREFIGHTING SYSTEM

Amount (In Rs.)

S No Description of Items Qty Unit Rate

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS

3589/ IS 1239 including Welding, fittings like elbows, tees, flanges,tapers,nuts bolts, gaskets

etc.and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting

with two or more coats of synthetic enamel paint of required shade complete as required :

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of

2 27.21 rating 68 degree centigrade with required accessories :

(a) 27.21.1 Pendent Sprinkler 165.00 Each 599.00 98835.00

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of

stainless steel complete with 15 NPT on reducer thread with maximum working pressure of

3 27.25 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to

sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center

bracket, stockbar of following sizes complete as required

Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in

white finish UL Listed or FM approved complete as required

Schedule of Quantities: IT PASSIVE

DSR E&M Amount (In Rs.)

S No Item Description UoM QTY Rate

DSR Amount Non-DSR

Supplying, Installation, Testing and commissioning of following CAT6A Patch Cord should have ETL/UL verification program certificate for compliance with

ANSI/TIA-568.2-D etc. complete as required.

1 39.13.1 Copper Patch Cords of length 1m (3ft) Set 360 173.00 62,280.00

39.13.2 Copper Patch Cords of length 3m (10ft) Set 360 405.00 145,800.00

Supply, Installation, Testing and Commissioning of loaded Patch Panel 24 Port Cat 6A U/UTP ,The Cat-6Atransmission performance is in compliance and

Exceeds ANSI/TIA/EIA-568.2-D Standard. Supports 1000-Base-T. 90 Degree (Top Entry) or 180 Degree Punch Down Design for Convenient Network

Terminations, Individual replaceable jack module panel design as applicable.UL Listed, Complaint to RoHS Directive 2011/65/EU and (EU) 2015/863 and

ASTM B 117 Certified. OEM should have ISO 9001:2015, ISO 14001:2015and ISO 45001:2018 or latest.All networking passive material (Fiber Cable,

Copper Cables, Networking Racks and their connectivity components) should be from one OEM make only for Data as per given Specification etc. all

3 MR Supply Installation Testing & Commissioning of 1 uPVC Cable Manager as per given specification etc. Nos 54 1,250.00 67,500.00

4 MR Supply, Installation, Testing & Commissioning of Mounting Hardware pack of 10pcs as per given specification etc. all complete Nos 12 200.00 2,400.00

Supplying and fixing 42U Rack with 6 inch Castor wheels and front brake Floor Standing Rack with Main Frame Pillar of 1.6mm CRCA Sheet with

removable side panels, L- Shape adjustable Vertical Mounting Rail of 2mm with 'U'Marking completely knocked-down condition (CKD) Shape, fitted with 4

number cooling fans, minimum 8nos two line cable entry/exit provision at top and bottom with rubber protection, Front door 5mm Toughened Glass with

5 39.25 MS frame or MS perforated with lock, Rear MS vented or perforated door, Powder coated Color- RAL- 7035 or black, complied with UL & RoHS, 2 x 6 Nos 1 32,954.00 32,954.00

sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required.

Supplying, Installation, Testing and commissioning of CAT6A Copper Information Outlet (IO) with face plate of color as per site requirement, should have

ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D. All copper Cable and components should be from same OEM to maintain

6 39.15 compatibility and interoperability etc. complete as required. Nos 360 302.00 108,720.00

Supplying, drawing, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG solid copper cable in existing conduit/ on surface, U/FTP, LSZH, Non-Plenum,

Horizontal (solid) Cable suitable for high speed data networking application supporting upto 10Gbps over a 100 meter channel. The 4 Unshielded Twisted

Pairs (UTP) cable with color coded insulation for easy indentification should have FLAME PROPERTIES i.e. Flammability Test - IEC 60332-1, Smoke Density -

39.18 IEC 61034, LSZH standards compliance: ANSI/TIA-568 C.2, ISO/IEC 11801, IEEE 802.3an, RoHS. Delay Skew should be < 45NS. The outer Cable

Diameter should be 7.5 + 2 mm. Cable should have been tested and verified by UL/ ETL etc. complete as required.

Supplying, Installation, Testing and commissioning of RJ45 Connector for CAT 6/6A Cables. RJ45 modular plug supports 4 twisted pairs, 8 positions, 8

connectors. Housing: PC, UL94V-2, transparent color, Use for 24- 26 AWG stranded wires etc. complete as required.

Supplying and drawing following core Multi mode Fiber Optic Cable having corrugated steel armoring, leser optimize 50/125 μm with HDPE jacket, LSZH

(Low smoke Zero Halogen), Tight-buffered or loose tube, maximum attenuation: < 3.5 dB/km at 850 nm, < 1.5 dB/km at 1300 nm, bandwidth > 2000

MHz-km at 850 nm, > 500 MHz-km at 1300 nm compliance and certifications: ISO/IEC 11801 Ed. 2.2, ANSI/TIA-568-C.3, ITU-T G.651.1 RoHS compliant.

Multi Mode Fiber shall be Central-loose tube filled with Thixotropic jelly, duly following Standards: ISO 11801, IEC 60793-1/60794-1-2, ITU-T-REC G.652D

and Telecordia GR-20-core, High quality Electro Chromium Coated Corrugated Steel tape (ECCS ) and HDPE- Sheath, Operating ambient Temperature

should be – 5 0C to +50 0C and Storage Temperature should be – 5 0C to +50 0C, Maximum Attenuation ± 3.5 dB/km at Operational Wavelength 850 nm

and ± 1.5 dB / km at Operational Wavelength 1300 nm . type of fiber should be 50/125 / G.652D & Refractive Index should be 1.483/1.478, The value for

Mode-filed, Cladding Diameter 50 ± 2.5 μm and 125 ± 1μm correspondingly i/c splicing & marking etc complete as required.

6 Core Multi Mode Optical Fiber Cable

Supply and fixing following port Rack Mount loaded LIU with pigtail, Front-mounted cable saddles for jumper management, suitable to manage both splices

and terminations, Pre-assembled shelves in multiple configurations, Rubber fiber slotted bracket built-in, metal splice shelf to protect the fibers, 2 fiber

10 39.21 spools built-in for 900μm tight buffered fiber storing, Capable of storing up to 3 meters of 900μm tight buffered fiber per adapter, Removable front and

rear covers for better access to interior of LIU, Should be Single / Multi mode LC Type fully loaded. Accessory kit consists of cable ties, mounting ear

screws, and spiral wrap tube etc complete as required.

Supplying and fixing Patch Cord of Optical Fiber Multi Mode or Single Mode LC to LC Fiber Duplex having high precision ceramic ferrule with good

concentricity, Fiber corning single mode G652D, Cable Type 2mm with Mechanical specification Apex Offset < 50 µm, Fiber Height + 100 nm, End-face

11 39.22 radius of Curvature 7mm < R <25mm, Repeatability < 0.2 db, Working ambient Temperature – 5 0C to +50 0C, Storage Temperature – 10 0C to +50 0C, Each 24 705.00 16,920.00

Length -- 2meter,Type -- LC-LC Duplex etc complete as required.

Schedule of Quantities: Integrated IT ACTIVE

DSR E&M Amount (In Rs.)

S No Item Description Unit QTY Rate

2025/ MR DSR Non-DSR

Supply, Installation, Testing & Commissioning of 48 Ports PoE+ capable ,(36 × 1 GbE PoE+, 12 × multigigabit RJ‑45

1a MR ports (supporting 100 M/1G/2.5G/5G) with PoE+ Uplink: 4 × fixed 10 Gigabit SFP+ ports, Layer 3 switching capabilities , Nos. 12 381,090.20 4573082.448

PoE+ support: up to 740W . With 5 yrs warranty . back to back OEM warranty + Contract Copy of warranty.

Supply, Installation, Testing & Commissioning of Port configuration48 Port switch with 48 × 10/100/1000 data ports ,

Uplinks: 4 × 10 Gigabit SFP+ fixed ports ,PoE capability None (no PoE support) , Switching Capacity: 176 Gbps , Stacking

Bandwidth: 80 Gbps via StackWise‑80 (up to 8-member stack) . With 5 yrs warranty . back to back OEM warranty +

Contract Copy of warranty.

Supplying, installation, Testing and commissioning of following capacity 24 port Layer 2 indoor Network Switch having

features and specifications etc. as mentioned here under: At least 24 X RJ-45 Gigabit Ethernet Ports and additional 2 X

10G Base -T with 4 X SFP Ports with non-blocking architecture by having Switching capacity of min. 168Gbps and packet

forwarding rate of 125Mpps or higher, 16K MAC table. Console Port, USB port, Stacking support of min. 8 units per stack.

Internal dual AC Power supply, STP, RSTP, MSTP, BPDU Filter, BPDU Restriction, Min. 9K Jumbo Frame, LBD, IGMP

Snooping V1/V2/V3, MLD Snopping V1/V2. IGMP /MLD Groups 1K or more, IPv4/IPv6 Loopback Interface, 16 L3 IP

39.3 Interface, Ipv6 ND, VRRPv3, UDP Helper, ECMP. VLAN: 802.1Ǫ, Port based, Ǫ-in-Ǫ, Multicast VLAN, Protocol VLAN, VLAN

2 Trunking, DHCP Snopping, Server, server Screening. RADIUS , TACACS+ Authentication, ǪoS: 802.1P, 8 queues per port,

ǪoS : WRR, Strict+WRR, WRED, 802.1p. ACL: MAC based, IPv4C IPv6, TCP/UDP Port number, time based ACL, TFTP

Client, SNMP V1, v2c, v3, SNMP traps, RMON, DHCP server, relay, client, LLDP, LLDP-MED, OAM, Dying Gasp, 802.3ah,

sflow, RIP, OSPF v2/v3, policy based route, SSL, SSH. 6 kV surge protection on all Gigabit Ethernet ports and on all GE RJ-

45 access ports. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of

Department of Telecommunication, Government of India etc. complete as required.

39.3.2 24 port Layer 2 Non-PoE Network Switch Nos 10 86,163.00 861,630.00

Supply, Installation, Testing & Commissioning of 10GBASE-SR SFP Module- Multi mode , Enterprise-Class ,With 5 yrs

warranty . back to back OEM warranty + Contract Copy of warranty.

Supply, Installation, Testing & Commissioning 1000BASE-T SFP transceiver module for Category 5 copper wire , With 5

yrs warranty . back to back OEM warranty + Contract Copy of warranty.

Supply, Installation, Testing & Commissioning of Access point with Dual‑band 802.11ax with 4×4:4 MIMO, internal

antenna , Max ThroughputUp to ~5.38 Gbps aggregate , Ethernet Uplink1 GbE and 2.5 GbE via PoE or PoE+ , PoE

Standard 802.3af (PoE) or 802.3at (PoE+) Memory / Storage 2 GB DRAM and 1 GB Flash , With 5 yrs warranty . back to

back OEM warranty + Contract Copy of warranty.

Supply, Installation, Testing & Commissioning of Wireless Controller with Throughput 5 Gbps (upgradeable to 10 Gbps),

5 MR AP Support Up to 250 Client Support, WLANs / VLANs 4,096 each Ports 2 × 10G fiber uplinks; 4 × 2.5/1G downlink RJ45 Each 2 471,127.27 942,254.54

. With 5 yrs warranty . back to back OEM warranty + Contract Copy of warranty.

Supply, Installation, Testing & Commissioning of AAA virtual solution for 200 users . Non Appliance base . With 5 yrs

warranty . back to back OEM warranty + Contract Copy of warranty. 802.1X authentication for wired and wireless

networks ,MAC Authentication Bypass (MAB) ,Guest access management with captive portal, Role-based and policy-

6 MR based access control Endpoint profiling (users, devices, and device types), Posture assessment and compliance checks Nos 1 668,630.24 668630.244

Integration with:

Cisco switches and wireless infrastructure Active Directory / LDAP / RADIUS Centralized monitoring, logging, and

Supply, installation, testing & commissioning of NMS , DNA Center Virtual Appliance. NMS license for 100 devices should

support day one. with 5 Years Support. back to back OEM warranty + Contract Copy of warranty. Centralized network

visibility and monitoring , Real-time health, performance, and fault monitoring , Network device discovery and inventory

Configuration management and change tracking , Network assurance and analytics , Automated policy enforcement and

provisioning ,Role-based access control (RBAC) Customizable dashboards, alerts, and reports

On site support & end-to-end integration of the existing network infrastructure with newly supplied network components

Smart Rack solution including Cooling,UPS, Fire Safety - Security and Monitoring

Capacity of IT Load (Total) - 7 kW

No. of Server Racks (800mm Width x 1200mm Depth x 42U Height) - 3 nos

Cooling Capacity - 3 x 3.5 kW in N+1 redundancy

Cooling Type- 6U Rack Mounted Cooling

Cooling Technology- Scroll Compressor

Detailed Monitoring & Diagnotics thru RDU Unit with Temp & Humidity Monitoring Sensor , Door Sensor , Water Leak

Sensor , Beacon Alarm with Event alert via Email notification with HMI Display screen

9 MR Blanking Panel as required Nos 1 2,787,455.00 2787455

Fire Safety & Security - Externally mounted Fire Suppression system , Rack based Access control system , IP Based

CCTV camera for live monitoring only

KVM Console 8Port

Rack PDUs( Vertical 0U Basic PDU IEC-16 (C13x +20 C19x4)-32A , Single Phase )- 2 Nos. per rack

10 kVA rack mountable UPS System - 02 no. in N+N redundancy

Battery back up per UPS via 12 V SMF Batteries - 30 min per UPS

Warranty - 5 yrs

One Time Installation & commissioning Charges

Supply & Laying of Interconnecting 18 G Copper piping with 9mm thick insulation between indoor & outdoor unit

considering 20 mtr indoor to outdoor unit piping distance per RCU (90 mtr or more/ as per requirement complete)

Supply & Charging of Refrigerant Gas (30 Kg or more/ as per requirement complete)

Supply & Laying of 25mm CPVC / UPVC Drain pipe with 9mm thick insulation @ 5 mtr per unit (15m or more/ as per

requirement complete)

Supply & laying of 4C X 2.5Sq.mm copper cable with conduit between IDU & ODU (70 m or more/ as per requriement

10 Unloading, Lifting, shifting & positioning of IDU & ODU unit at site (3 nos.) Nos 1 351,876.00 351,875.00

Supply of 0.5 sqmm x 6 core Copper cable (60m or more/ as per requirement complete)

Perforated 300X 50 mm Cable Tray with cover (40m or more/ as per requirement complete)

Lifting shifting of smart cabinet and accessories (1 lot/ as per requriement complete)

Installation , Testing & Commissioning work complete

All Items & accessories should be from single OEM

Schedule of Quantities: Audio Video Work

S No Description UNIT Qty PRICE Amount

SITC of 55" Display having Aspect Ratio 16:9 Resolution 3840*2160(4K UHD) Brightness 500cd/m² Backlit LED Type

1 Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract Nos. 19 58,310.00 1,107,890.00

Copy of warranty.

SITC Push Pull mount bracket for 55 inch display having material: High Grade Cold Rolled Steel,Swivel Angle: -60~+60° Swivel,

VESA Pattern: Max. Upto 600x400mm ,Mounting Profile: 60-390mm, Colour: Black, Weight Lifting Capability: Upto

2 50kgs/110lbs,Comes with standard mounting hardware, Product Size: 640x430x50mm Nos. 21 8,610.00 180,810.00

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates.back to back OEM warranty + Contract

Copy of warranty.

SITC of Premium all-in-one video bar having Maximum Peak Power, Symmetrical 20 W Rated Power, Symmetrical 20 W per

channel, < 0.3% distortion over frequency range Connectors (1) stereo 1/8-in (3.5 mm) Safety IEC/UL/EN

60065:2014/A11:2017, IEC/UL/EN 62368-1:2014/A11:2017 Focus Distance 0.5 m (1.6 ft) to ∞ Field of View (FOV) 123°

diagonal × 115° horizontal × 81° vertical

3 Image Sensor 8 MP Lens Up to 5x digital zoom Positioning Autoframing mode, manual pan-tilt-zoom (PTZ) with configurable Nos. 12 140,000.00 1,680,000.00

presets Automatic white balance, automatic brightness, digital noise reduction Supported Video Resolutions UHD 2160p (4K),

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of wireless presentation system having Operating system Windows 10 and higher macOS 11 (BigSur) and higher Android

v11 and higher (ClickShare App) iOS 14 and higher (ClickShare App),For a smooth experience with Microsoft Teams or Zoom

Minimum: Intel i3 dual-core processor or AMD Ryzen 7 / 8GB RAM / OS: Windows 10 latest build or Mac OS Mojave latest build

Recommended: Intel i5 4-core processor or AMD Ryzen 9 / 8GB RAM / OS: Windows 11 latest build or Mac OS latest build,4K

UHD (3840*2160) @ 30Hz. HDMI™ 1.4b or USB-C DisplayPort 1.2 (only Gen2),Audio output HDMI,USB 1 X USB-A, 1 X USB-C

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of 15Mtr Type C to Type C Active Cable support up to 100w of power, 40Gbps transfer speeds and 8k@60hz solutions. All-

in-one cable is compatible with Thunderbolt 4, Thunderbolt 3, USB4 and USB 3.1,Gen 1,Gen 2 & DisplayPort Alt Mode.100%

5 USB-C Compatible.Ideal for Macbook Pro or better Nos. 10 19,040.00 190,400.00

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates.back to back OEM warranty + Contract

Copy of warranty.

SITC of 1.8 Mtr Type C to Type C Active Cable support up to 100w of power, 40Gbps transfer speeds and 8k@60hz solutions. All-

in-one cable is compatible with Thunderbolt 4, Thunderbolt 3, USB4 and USB 3.1,Gen 1,Gen 2 & DisplayPort Alt Mode.100%

6 USB-C Compatible.Ideal for Macbook Pro or better Nos. 10 2,100.00 21,000.00

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of table enclosures with 2 Nos. universl power modules, 2 Nos. LAN ports, 1 Nos. Type C port, 1 Nos. HDMI port, 1 Nos.

USB 3.0 port and 2 pass-through holes or better

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of Kisok with 22 inch touch screen including license, thermal printer, Barcode scanner and Web camera

8 Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract Nos. 1 360,000.00 360,000.00

Copy of warranty.

SITC of 65" Display having Aspect Ratio 16:9 Resolution 3840*2160(4K UHD) Brightness 500cd/m² Backlit LED Type Surface

Haze 25% or more Hard Coating 3H Operating hours 24/7 operation

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC POP-UP Motorized TV Lift with Remote Controller for 65 inch display

10 Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract Nos. 7 42,000.00 294,000.00

Copy of warranty.

SITC of 43" Display Aspect Ratio 16:9 Resolution 3840*2160(4K UHD) Brightness 500cd/m² Backlit LED Type

Haze 25% or more Hard Coating 3H Operating hours 24/7 operation

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC Push Pull mount bracket for 43 inch display having material: High Grade Cold Rolled Steel,Swivel Angle: -60~+60° Swivel,

VESA Pattern: Max. Upto 600x400mm ,Mounting Profile: 60-390mm, Colour: Black, Weight Lifting Capability: Upto

12 50kgs/110lbs,Comes with standard mounting hardware, Product Size: 640x430x50mm Nos. 2 10,320.00 20,640.00

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of Professional electrically retractable 21,5" widescreen FULL HD monitor with 20 degrees of automatic inclination to be

integrated into furniture. Solid aluminium monitor housing in natural anodised finishing. Modern and elegant design with round

corners. Up-table cover plate in brushed stainless steel. DVI-I and DVI-D HDCP compliant inputs. Lift system with electrical

13 engine activated through integrated push buttons in the cover plate, external GPI controls (contact closure) or AH-Net Protocol Nos. 2 773,500.00 1,547,000.00

(RS422) through CAT 5 cable with loop-through, addressing and termination switch.

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of Digital Interactive Podium in Metallic Frame with 22”LCD Tablet Monitor 222WD( Dual Touch ),Resolution :1920 x 1080

( FULL HD )View Area 477(H) x 268(V) mm– 22 inch Luminance, White 250 cd/㎡ Contrast Ratio 1000:1 (typ.) Viewing Angle

160˚ (H/V) Lamp Life Time 20,000 Hrs (min) Tablet Technology Electromagnetic Resonance Detectable Height 3~10 mm

14 Position Report Rate 138pps Pressure Resolution 1024 Level UHD HDMI Inputs : 3 HDMI INPUT ( HDMI 1.4/HDCP1.2 UHD HDMI Nos. 2 315,000.00 630,000.00

Outputs 3 HDMI OUTPUT ( HDMI 1.4/HDCP1.2 Max. Resolution 3840 X 2160 (upto UHD)

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of Mini PC having Intel 14th Gen Core Ultra 7 155H Processor (16 Cores 22 Threads 4.8GHz 24MB Cache Intel Arc

Graphics) and 2.5GbE LAN, Wi-Fi 6E, Bluetooth 5.3 and 2x Thunderbolt 4 ports

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

Supply installation testing and comissioning of fully digital conference system controller audio processing ,Integrated dynamics

processor with programmable noise gate, AGC, and limiter, Should support microphone modes: Direct Speak, Request, Group

Discussion, Operator, Hands-Free. Should Front controls: Power On/Off and system volume dial; DLP switch for conference port

power. Should have Browser based configuration and monitoring.Connectivity: minimum 2× power connectors, 4× conference

network ports, 1× USB 2.0, 1× LAN, 1× balanced XLR in, 1× balanced XLR out, 2× unbalanced inputs, 2× unbalanced outputs,

and 2+ Dante ports.Recording: 8 GB internal storage and external USB (up to 500 GB); MP3 recording with single-button

16 start/stop and LED indicator.Features: audio routing, network monitoring, diagnostics, camera control(with third party or or Nos. 2 636,098.40 1,272,196.80

using external OEM certified Control Processor / product of approved make)).19" rack-mount; power supply must be from the

same OEM. Certification CE (BIS). OEM must have a direct presence in India with company owned service centre ., need to

submit the incorporation certifications during technical bid as per specification..The OEM, product and bidder shall not share the

common borders with India and adhere to GFR 144 (xi) guidelines of purchase manual.

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

S No Description UNIT Qty PRICE Amount

Supply installation testing and commissioning of Integrated Chairman Audio Conference Unit

a) Mount Type: Sleek flush mount

b) Buttons: 'Push to talk and integrated LED, Priority button & 'Next in line' button

c) Connectivity: 2 x RJ 45 ethernet port (IN/OUT - interchangeable). Loop through, daisy-chain cabling (non-proprietary).

d) Microphone Dynamic range: > 90 dB or better

e) Frequency response: 20-20,000 Hz or better

f) Compatible with Short Stem Removable microphone Size: Max. size should be 110 mm or less with dual indicating LED.

g) Connector : Push and lock connector

h) Polar Pattern: Cardioid.

17 i) Max SPL @e 1kHz: 105 dB SPL or better Nos. 2 86,502.50 173,005.00

j) Signal-to-noise ratio referred to 1 Pa: 74 dB or better

k) Sensitivity @ 1 kHz : -35 dBV/Pa or better

l) Certification: CE, BIS etc., complete as required.

Complete as required with all accessories. It is inclusive of detailed conditions, re-doing till the satisfaction, getting the desired

functionality complete.OEM must have a direct presence in India with company owned service centre., need to submit the

incorporation certifications during technical bid as per specification. The OEM, product and bidder shall not share the common

borders with India and adhere to GFR 144 (xi) guidelines of purchase manual.

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

Supply installation testing and commissioning of Integrated Delegate Audio Conference Unit

a) Mount Type:Table flush mount

b) Button: 'Push to talk' with integrated LED

c) Connectivity: 2 x RJ 45 ethernet port (IN/OUT - interchangeable). Loop through, daisy-chain cabling (non-proprietary).

d) Microphone Dynamic range: > 90 dB or better

e) Frequency response: 20-20,000 Hz or better

f) Compatible with Short Stem Removable microphone Size: Max. size should be 110 mm or less with dual indicator LED.

g) Connector : Push and lock connector

h) Polar Pattern: Cardioid.

i) Max SPL @ 1kHz: 105 dB SPL or better

j) Signal-to-noise ratio referred to 1 Pa: 74 dB or better

k) Sensitivity @ 1 kHz : -35 dBV/Pa or better

l) Frequency response: 125 to 15000 Hz or better

m) Certification: CE, BIS etc., complete as required.

It is inclusive of detailed conditions, re-doing till the satisfaction, getting the desired functionality complete.OEM must have a

direct presence in India with company owned service centre., need to submit the incorporation certifications during technical bid

as per specification. The OEM, product and bidder shall not share the common borders with India and adhere to GFR 144 (xi)

guidelines of purchase manual.

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of short stem mic with The color of the LED is configurable red or green for the inactive, active and request state,

low profile microphone of exceptional sound quality designed to give the user the possibility to view the meeting and be seen by

19 other participants and/or the audience without any obstruction Nos. 22 38,690.40 851,188.80

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

Supply, Installation, Testing and Commissioning of Audio routing software it allows you to create custom configurations,

manage inputs outputs and switch between configurations for dante channel.Create new custom configurations ,Activate a

prepared audio configuration.Edit, duplicate and delete a configuration ,Switch between existing configurations Visualize the

various routing groups as a matrix ,Set routing options,Manage all inputs and outputs (auxiliary and Dante levels) ,Set mix

20 minus and number of mix minus groups ,Route translation channels to Dante.Select microphones or loudspeakers as always Nos. 2 329,000.00 658,000.00

active for user input and output groups in customs configurations.OEM must have presence in india , need to submit the

incorporation certifications during technical bid as per specification.

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of Connection Cable 2mtr black ICC5/2

21 Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract Nos. 25 3,078.40 76,960.00

Copy of warranty.

SITC of Connection Cable 20mtr black ICC5/2

22 Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates.back to back OEM warranty + Contract Nos. 8 10,469.60 83,756.80

Copy of warranty.

SITC of 2-way, Ceiling-mount loudspeaker. Frequency range - 72 Hz to 20 kHz, Rated RMS Power - 30Watts or better,

Sensitivity-88 dB SPL or better, Coverage Angle-110° conical or better, Maximum SPL Continuous/Peak-104dB/110dB or better,

Rated Impedance - 8 Ohms. Transformer Tapping - 70V/100V(30, 15, 7.5watts) or better. Transducer - LF - 6.5-inch or better,

23 HF- .86-inch or better coaxially mounted with LF, Material - Painted ABS polymer Baffle and Power coated steel grille or better. Nos. 18 16,128.00 290,304.00

Safety rating - UL1480, UL2043. Mounting rails and C-Ring for ceiling tile included.

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of Quad Channel Class-D amplifier. Per Channel Power 60W @8Ω/4Ω or better. Support for 70V/100V or more. Power

Sharing or Bridge/Parallel modes for better power distribution. Frequency Response- 20 Hz – 20 kHz or better. Signal to Noise

ratio -> 103 dB or better, Input impedance - >10k, balanced or unbalanced or better, Front and Rear panel indicators for Power,

24 signal (per channel), limit / mute / protect etc. or better. Better to have Remote standby and Power saving features - Auto- Nos. 4 108,752.00 435,008.00

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of Open Architecture Digital Signal Processor with 64-bit architecture. Audio Processing - 32-bit floating point. Mic/Line

Inputs - 36 or more with +48VDC Phantom Power on each channel. Line Outputs -16 or more. GPIO ports for external control -

32x32 or more. AEC channels - 48 or more with 200ms tail length for Analog and Networked Microphones. Minimum 8x8 Dante

channels and support for up to 256x256 Network audio channels via Dante /AES67 or similar protocol. SIP Softphone integration

for Audio conferencing. USB port for AV USB Bridging for software or web-based conferencing applications emulating USB Audio

(Speakerphone) and USB Video (Camera) driver. USB Audio Bit depth - minimum 24 bit, USB Channel - 16x16 or more, USB

Sample rate - 48 kHz, A/D-D/A converters - 24 bit or better, Sample Rate - 48 kHz, Input frequency response - 20 Hz to 20

kHz or better, Input and Output dynamic range > 108 dB or better. Front Panel Control and Indicators with OLED Display.

Ethernet Ports - Dual Gigabit for Audio Transporation and Audio & Network Redundancy. The Processor should have processing

capabilities for Video Conferencing (AEC).

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of Digital Wireless handheld transmitter with dynamic cardioid microphone capsule, Sensitivity: 2.1 mV/Pa, Sound

pressure level: 154 dB SPL, Frequency response: 20Hz - 20KHz, System latency: 1.9 ms, Dynamic range: 130 dB, 10mW RF

power with up to 100m/328ft working range, Programmable mute switch, persistent E-Ink display for always on information

along with battery backup of 12 hours.

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of Four-channel digital Dante enabled receiver, should support automatic frequency setup function, intermodulation free

operation with spectrum scan functionality to establish an equidistant frequency grid for more than 250 channels. Frequency

response: 20Hz - 20KHz, System latency: 1.9 ms, Dynamic range: 130 dB, AES 256 encryption, Ethernet ports (RJ-45) for

remote network-based monitoring, headphone output along with OLED display to showing the current frequency, channel

number, metering of RF level, metering of AF level, lock status, muting function, antenna switching diversity, app connection,

27 gain, audio output level, menu, and battery status for each of the transmitters, Integrated antenna splitter with antenna power Nos. 2 179,340.00 358,680.00

and loop through to daisy chain up to 16 channels, Four network ports for flexible network configurations - each port can be

assigend as: Control, Control + Dante® Prim, Control + Dante® Sec, Dante® Prim, Dante® Sec, can be controlled through

smart Assist App which can monitor the system remotely.

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

S No Description UNIT Qty PRICE Amount

SITC of Digital Wireless UHF Headset microphone set with Rack receiver having 56 MHz or higher of switching bandwidth and

equidistant spacing enables up to 90 channels or more along with 2,240 selectable frequencies for fine tuning. It should have

auto scan feature for efficient connections to reduce time and effort. It should have min 100 meter transmission range. It should

have cardioid pick-up pattern, Sound pressure level (SPL) : 150 dB or more, System Latency : 1.9 ms, Dynamic range: 130 dB

and frequency response: 20Hz- 20000 Hz. The microphone system can be controlled through ios / Android applications via

bluetooth. It should have 12 hours of operation life and more.

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of Charging set with USB charger and 2 rechargeable battery packs for handheld and bodypack transmitter. It should

charge 100% battery power in max. 3 hours charging time. Maximum operating time of 12 hours. Stackable and charging is

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of HDMI 8x8 Matrix Switcher with HDMI Compliance HDCP Compliance Video Bandwidth Video Resolution Color Space,

Color Depth HDMI 2.0b, HDCP 2.2 594MHz/18Gbps Up to 4K@60Hz 4:4:4, RGB, YCbCr 4:4:4 / 4:2:2. YUV 4:2:0 8/10/12bit,

Audio Formats HDMI IN/OUT: LPCM, Dolby Digital/Plus/EX, Dolby True HD, Dolby Atmos, DTS, DTS-EX, DTS-96/24, DTS High

Res, DTS-HD Master Audio, DSD AUDIO Extracted: Optical Outputs: LPCM 2.0CH/Dolby/DTS 5.1CH Balanced Analog Audio

30 Outputs: LPCM 2CH, input ports 8 × HDMI INPUT [Type A, 19-pin female], output ports 8 × HDMI OUTPUT [Type A, 19-pin Nos. 2 260,000.00 520,000.00

female] 8 × OPTICAL AUDIO OUT [S/PDIF] 8 × L/R AUDIO OUT [3.5mm, 5pin Phoenix Connector], Control ports 1 × TCP/IP

[RJ45] 1 × RS-232 [D-Sub 9] 1 × IR EXT [3.5mm, Stereo Mini-jack] or better

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of Multiveiwer for camera with HDMI 2.0b, HDCP 2.2 and HDCP 1.x compliant, Support 18Gbps video bandwidth, Input and

output resolutions support up to 4K@60Hz, Support LPCM, AC3, DD+, DTS, DTS-HD, up to 7.1 audio channel, Seamless

switching between input channels and combined multiple images on single UHD monitor, Up to 8 display modes: SINGLE, PIP,

PBP (1), PBP (2), Triple (1), Triple (2), Quad (1), Quad (2), Seamless switching in single screen display mode, Fast switching in

31 multiview display mode, Audio de-embedding via analog and optical fiber audio ports, Support volume control and independent Nos. 2 180,600.80 361,201.60

audio selection, Support OSD navigation for advanced setting, EDID management, Control via front panel buttons, IR remote,

OSD menu navigation, Controller software, RS-232 commands or better.

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of 4 x 4 USB 3.2 having Computer4 x USB Type B Female (Blue)

Device4 x USB Type A Female (Blue)

Power (Optional)1 x USB micro B Female (Black)

USB CableUSB 3.2 Gen 1 B to A Cable 1.2m x 2

Remote Port Selector1.8 m

Selected4 (White)

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of 4K @30fps & Full HD 1080p @ 60fps PTZ Camera with minimum 30X Optical Zoom & FoV of minimum 68 deg , min 255

Presets.Camera should support simultaneous outputs through Ethernet, HDMI, 3G-SDI, Audio In and can be controlled via

RS232 & 422 In & Out & IP.Panning angle -170° ~ +170°, Tilting angle -30° ~ +90° . The tilting and panning speed of camera

33 should be minimum 300° per second. Camera should support SRT, FreeD Protocol, PoE and Virtual USB Driver. OEM should be Nos. 6 205,800.00 1,234,800.00

CE, FCC, RoHS & BIS Certified.

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of Cable Cubby with a push button and flip top, 2 Universal Power, 1 Type C, 2 Network/RJ-45 with pass through for

HDMI, USB Cables etc. all complete as per approved drawings, tender specifications and direction of Engineer-in- Charge.

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of wireless System for video conferencing and / or wireless and simultaneous transmission of image content from up to

two sources (e.g., presentations) in conference and meeting rooms on one visualization devices (e.g., display or projector). The

system supports any conferencing platform, UC based systems and works with AV – USB peripherals. It provides an output

resolution up to 4K (3840 x 2160) pixels. Supports dual display output for video conferencing and presentation. The annotation

and whiteboard functionality on compatible devices are supported. Direct connection of one USB-C Alt video source,

35 simultaneous integration into two separate and independent network system (through WLAN & LAN) is possible. The system Nos. 2 246,960.00 493,920.00

supports Airplay, Google Cast, Miracast and extended desktop.

Input resolution: (USB-C Alt) up to 3840 x 2160 pixels @ 30fps

Output resolution: (HDMI) up to 3840 x 2160 pixels @ 30fps

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of 24-Port with 1U rack mount 440x43.2x400mm, Switching Fabric 128 Gbps, 24 ports PoE+ 10M; 100M; 1G 648W (base)

up to 720W, 10GBASE-X SFP+ ports 4 ports 1G; 10G, 1 x Fixed 880W (C14) On/Off switch.

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of A rack-mountable control system with a powerful 4‑Series™ control engine, Ethernet 100/1000 Mbps, auto‑switching,

auto‑negotiating, auto‑discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP

(SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1xX, SNMP, BACnet™ and IP1, IPv4 or IPv6, Active

37 Directory® service authentication, HTTPS web server, HTTPS web browser setup and XiO Cloud® client, SMTP email client or Nos. 2 162,400.00 324,800.00

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates.back to back OEM warranty + Contract

Copy of warranty.

SITC of mobile control app with Super Retina® display support for the home, office, or classroom. Integrates Apple® iPad®

devices with a control system to monitor and control lights, media, climate, security, and more from anywhere via a mobile

38 broadband or Wi-Fi® network connection or better. Nos. 2 11,200.00 22,400.00

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of 10.2 inch ipad (9th generation), Capacity1 64GB 256GB, Retina display 10.2-inch (diagonal) LED backlit Multi-Touch

display with IPS technology 2160x1620-pixel resolution at 264 pixels per inch (ppi) True Tone display 500 nits brightness or

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of Wifi router with 1.5x better performance than an AC router, up to 1.8Gbps† for fast wireless speeds, WiFi 6 supports all

current WiFi devices—Backward compatible with earlier WiFi generation devices,• WiFi6(802.11ax)dualbandWiFi (AX1800)-

2.4GHz: 600Mbps, 40/20 MHz

1024/256-QAM- 5GHz: 1200Mbps, 80/40/20 MHz 1024-QAM- Backwards compatible with 802.11a/b/g/n/ac WiFi • 1024-

QAM—25%dataefficiencyand faster speeds than a 256-QAM router Powerfulquad coreprocessorMemory:256MBflashand512MRAM

Five(5)10/100/1000MbpsGigabit Ethernet ports-1WAN&4LAN One(1)USB3.0port.

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

S No Description UNIT Qty PRICE Amount

SITC of TechnologyePaper Display

Display Size11.6 inches, Anti Glare Display

Installation TypeAny Hard Surface, and Glass

Made in IndiaRequired

Supporting CalenderG Suite, Office 365, Microsoft Exchange, and iCalendar

Scheduled Meeting Showcaseupto 9 rooms at a single glance

Battery Cycle1 month ( with 5-10 changes per day)

Display ColorsBlack, White, Red & Yellow

TransmissionWireless

FeaturesWeb Portal to check Battery Life, Dashboard, Reports with cloud licence.

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of HDMI 4K to USB 3.0 professional camera converter works with any virtual meeting room software that enables USB

cameras and microphones, such as Microsoft Teams, Zoom, Google Meet or BlueJeans. Requiring no drivers and compatible with

42 Windows, macOS and Linux laptops, the camera converter resolves all interoperability issues. Nos. 2 60,360.00 120,720.00

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of 15Mtr HDMI AOC Cable (Certified 4K UHD) with 2.0, including Ultra HD 4K (3840* 2160 @ 60Hz), 18Gbps, mirror and

extend modes, HD 2K 1080p, 3D, Ethernet Channel, Audio Return Channel, 1080p, Full HD Resolution, Dolby True HD and DTS-

43 HD Master Audio. Featuring an aluminum case and corrosion- resistant 24K gold plated or better. Nos. 30 14,000.00 420,000.00

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of Speaker Cable 2C x 0.75 sq.mm with Core 2core Insulation Material1.55mm PE Jacket Material PVC material Color

Pink Diameter 3.8X7.6mm, Conductor Material Copper Diameter 2x150/0.08mmBC or better.

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of 1.8 Mtr HDMI Cable (Certified 4K UHD) with 2.0, including Ultra HD 4K (3840* 2160 @ 60Hz), 18Gbps, mirror and

extend modes, HD 2K 1080p, 3D, Ethernet Channel, Audio Return Channel, 1080p, Full HD Resolution, Dolby True HD and DTS-

45 HD Master Audio. Featuring an aluminum case and corrosion- resistant 24K gold plated or better. Nos. 50 1,500.00 75,000.00

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of Control Cable Shielded Twisted Pair (STP) Cable, Category 6 (Cat6) compliant with EIA/TIA 568-C.2 standard or better.

46 Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract Mtr 900 91.00 81,900.00

Copy of warranty.

SITC of CAT6 Cable (for HDMI extenders/control) with Category : 6 UTP Solid cableConductor : Conductor : 23 AWG

(Solid)Conductor Meta : Conductor Meta : Bare CopperInsulation Material : HD-PEOD : 6.1mm ±0.2Resistance Unbalance : 5%

47 MaxCapacitance Unbalance : 330pF/100mDelay Skew : <45nS or better. Mtr 400 41.00 16,400.00

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of 15Mtr Type B to Type A Active Cable support up to 100w of power, 40Gbps transfer speeds and 8k@60hz solutions. All-

in-one cable is compatible with Thunderbolt 4, Thunderbolt 3, USB4 and USB 3.1,Gen 1,Gen 2 & DisplayPort Alt Mode.100%

48 USB-C Compatible.Ideal for Macbook Pro or better. Nos. 4 22,400.00 89,600.00

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of 24U Rack (600 X 600 X 825) with 1.2mm high quality metal sheet 1.6mm mounting angle wiht clear "U" marking, Front

with toughened glass, Real MS Door with lock, Removable side panels, Cable entry provision at top & bottom, 2/4 Cooling fan

fitting option at top, Sufficient perforation provided for ventilation, Finished with 7 process pre-treated powder coating,

Attractive color design- RAL- 7035 or black or better.

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of 8 Port relay for Controlling Motors for up/down screen, Projector Mounting Kit up/down, Curtains open/close, Power ON

the projector / switcher in sequence, Power ON/OFF the lights.

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates.back to back OEM warranty + Contract

Copy of warranty.

SITC of 98" Display having Aspect Ratio 16:9 Resolution (HxV) 3840(H)x2160(V) Brightness (typ) 500 cd/m² High Haze Yes,

Haze 25% or more Viewing Angle 178° Display Orientation Landscape & Portrait Operation Time 7 daysx24 hours.

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC POP-UP Motorized TV Lift with Remote Controller for 98 inch display.

52 Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract Nos. 1 91,000.00 91,000.00

Copy of warranty.

SITC of 86" Display having Aspect Ratio 16:9 Resolution (HxV) 3840(H)x2160(V) Pixel Pitch 0.4296mm(H) × 0.4296 mm(V)

Back Light Unit DLED Brightness (typ) 500 cd/m² Contrast Ratio 1200:1 High Haze Yes, Haze 25% or more Viewing Angle 178°

53 Display Orientation Landscape & Portrait Operation Time 7 daysx24 hours Nos. 1 236,250.00 236,250.00

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC Push Pull mount bracket for 86 inch display having VESA : 200 x 200 , 300 x 300 , 400 x 200 , 400 x 400 , 600 x 400 mm,

Tilt : +/- 3 degrees, Metal Sheet Thickness:Wall Plate THK=2mm cold-rolled sheet, Bracket Arm THK=2.5mm cold-rolled sheet,

54 Surface Finish:Powder Coating, Color:Fine Texture Black,Bracket Arm Profile:68~215mm. Nos. 1 23,120.00 23,120.00

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC Push Pull mount bracket for 65 inch display having material: High Grade Cold Rolled Steel,Swivel Angle: -60~+60° Swivel,

VESA Pattern: Max. Upto 600x400mm ,Mounting Profile: 60-390mm, Colour: Black, Weight Lifting Capability: Upto

55 50kgs/110lbs,Comes with standard mounting hardware, Product Size: 640x430x50mm. Nos. 4 13,760.00 55,040.00

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC of 75" Display having Aspect Ratio 16:9 Resolution (HxV) 3840(H)x2160(V) Brightness (typ) 500 cd/m² High Haze Yes,

Haze 25% or more Viewing Angle 178° Display Orientation Landscape & Portrait Operation Time 7 daysx24 hours.

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

SITC Push Pull mount bracket for 75 inch display having VESA : 200 x 200 , 300 x 300 , 400 x 200 , 400 x 400 , 600 x 400 mm,

Tilt : +/- 3 degrees, Metal Sheet Thickness:Wall Plate THK=2mm cold-rolled sheet, Bracket Arm THK=2.5mm cold-rolled sheet,

57 Surface Finish:Powder Coating, Color:Fine Texture Black,Bracket Arm Profile:68~215mm. Nos. 1 20,230.00 20,230.00

Warranty : OEM warranty of atleast 05 years to be provided within the quoted rates. back to back OEM warranty + Contract

Copy of warranty.

58 SITC of SOFTWARE,CONTROL,F/SIGNAGE DISPLAY Nos. 1 28,000.00 28,000.00

SITC of Dual Side Table Top Display Size 7.5" Diagonal or more with brushed Aluminium finishing, Landscape orientation

required, E-Ink Technology, Capable to Display in Black, White,Red & Yellow Colours, Resolution-800 x 480, Connectivity-BLE,

59 Battery Powered, Operatablity through Mobile Software Application as well as Server if required, including Gateway setup (for Nos. 20 49,000.00 980,000.00

atleast 2 rooms) and Cloud License for 5 years complete as per direction of Engineer in charge. OEM warranty of atleast 05

years to be provided within the quoted rates. back to back OEM warranty + Contract Copy of warranty.

S No Description UNIT Qty PRICE Amount

SITC of active led wall size 3.6m x 2m

Pixel Pitch: 1.2mm or less

Brightness:800 nits or more

Technology: COB

Refresh Rate: 3840 Hz or more

Inbuilt controller and Digital Signage software of same make as of LED

Media player of same make with PBP/PIP upto 4 input sources, Wall Mounting Structure with cabinet, accessories & spare

modules, processor, etc. complete in all respect as per direction of Engineer in charge.

Warranty : 05 years or more to be provided by OEM within the quoted rates. back to back OEM warranty + Contract Copy of

SITC of active led wall size 3mx1.6m Pixel Pitch 1.2mm COB

Pixel Pitch: 1.2mm or less

Brightness: 800 nits or more

Technology: COB

Refresh Rate: 3840 Hz or more

Inbuilt controller and Digital Signage software of same make as of LED

Media player of same make with provision upto 4 input sources, Wall Mounting Structure with cabinet, accessories & spare

modules, processor, etc. complete in all respect as per direction of Engineer in charge.

Warranty : 05 years or more to be provided by OEM within the quoted rates. back to back OEM warranty + Contract Copy of

SITC of outdoor active led wall size 5mx3m or more

Pixel Pitch: 3.97mm or less

Brightness:4500 nits or more

Technology: SMD

Refresh Rate: 3840 Hz or more

Inbuilt controller and Digital Signage software of same make as of LED

Media player of same make with provision upto 4 input sources, Wall Mounting Structure with cabinet, accessories & spare

modules, processor, etc. complete in all respect as per direction of Engineer in charge.

Warranty : 05 years or more to be provided by OEM within the quoted rates. back to back OEM warranty + Contract Copy of

SITC of Outdoor active led wall size of 3mx2m

Pixel Pitch 2.98 mm or less

Brightness:4500 nits or more

Technology: SMD

Refresh Rate: 3840 Hz or more

Inbuilt controller and Digital Signage software of same make as of LED

Media player of same make with provision upto 4 input sources, Wall Mounting Structure with cabinet, accessories & spare

modules, processor, etc. complete in all respect as per direction of Engineer in charge.

Warranty : 05 years or more to be provided by OEM within the quoted rates. back to back OEM warranty + Contract Copy of

Schedule of Quantities: IPBAX

A DSR /MR Item Description Make UOM Qty Unit Price DSR Amount Non DSR Amount

Supplying, installation, testing and Commissioning of IP based voice communication system with 04 Port Voicemail, 04 Port FXS,

04 Port FXO, 1 PRI Trunk lines (30 Channels) Circuit with CLIP Facility, min 100 IP users License with provision for further

1 MR additions, 100 analog users, 01 Number IP based Operator Console, 100 Party Conference, Speed Dial, Music on Hold, Internal/ Avaya/ Al-Lu/ Cisco Nos. 1 1,565,743.00 1,565,743.00

External ring difference, Call Barring, Call Pickup, Redundant server in active -Active mode and as per technical specification

including supporting accessories etc complete as required. The system should have valid TEC GR approval from DoT.

SITC of Gateway for accomodating Analog Extension CArds, Compact, stackable design with optional 19" rack or wall mounting

kits; includes internal PSU and power cord. 2 x 10/100 Mbps full-duplex LAN ports with managed Layer 3 Ethernet switch (one for

2 MR Avaya/ Al-Lu/ Cisco Nos 9 168,750.00 1,518,750.00

LAN/WAN), Additional ports: DTE (serial), Music-on-Hold (MOH), relay switch (e.g., for door entry), Compact Flash, and Feature

Key slot, Dual SD card slots. Will increase IP PBX analog extension capacity by 220 extensions

3 MR SITC of 1 No. SIP PRI Activation Lic Avaya/ Al-Lu/ Cisco Nos 1 54,375.00 54,375.00

Supply, Installation,Testing and commisioning of IP Video Phone with 5-inch colour screen and an integrated camera for full

access to video calls and conferences, Video Resulution: 1080p30, Integrated Camera: 2 megapixels with digital shutter, 32 GB

flash memory, 2 GB of RAM, Dual Port RJ45, 10/100/1000 Mb, Display resolution 720 x 1280 pixel, Capacitive Touch with 24-bits

4 MR Avaya/ Al-Lu/ Cisco Nos. 5 40,000.00 200,000.00

color depth, Touch Screen, Message Waiting Indicator, RJ9 headset connector for a high-quality wired headset, Micro HDMI 2.0

port to extend display, General purpose port: USB flash drive for data transfer to and from the device up to 32 GB of storage.,

Supply, Installation, Testing & Commissioning of Type 1 SIP Phone with 2.8” (diagonal) color display—320 x 240 pixels, 4 buttons

with dual LEDs (red, green), 4 Context sensitive soft keys, 12 administrative buttons/ 3pages, Hard buttons for phone, messages,

5 MR Avaya/ Al-Lu/ Cisco Nos. 9 13,500.00 121,500.00

contacts, history, home, navigation cluster, headset, speaker, volume, mute, LEDs for speaker, mute, headset, message, history,

Full duplex speakerphone & handset , Message waiting indicator, 2 nos. Gigabit Ethernet (10 / 100 / 1000) line interface

SITC of Type 2 SIP Phones Monochrome display – 3.2 inches x 2.2 inches, 8 buttons with dual LEDs (red, green), 4 softkeys,

Hard buttons for phone, messages, contacts, history, home, navigation cluster, headset, speaker, volume, mute, Red LEDs for

6 MR Avaya/ Al-Lu/ Cisco 45 7,000.00 315,000.00

speaker, mute, headset, message, history, 24 administrative buttons, Wideband audio in handset and headset, Full duplex

speakerphone, 2 nos. Ethernet (10/100) line interface

Supplying, Installation, Testing & Commissioning of Analog phones having standard feautres like 16 digit LCD display, 2 way

7 38.4 Beetal/Panasonic Nos. 320 1,544.00 494,080.00

speaker, caller ID and number storage facility etc. complete as required.

8 MR SITC of 50 Pair Riser cable Delton Mtr. 300 650.00 195,000.00

9 MR SITC of 500 Pair MDF Box with Krone module Krone Nos 2 25,900.00 51,800.00

10 MR SITC of 100 Pair MDF Box with Krone module Krone Nos 10 14,500.00 145,000.00

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - RO Plant

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE

DSR (INR) NON-DSR

SITC of Point-of-Use Water Cooler, Tri-Temperature type (Hot, Ambient &

Cold), floor-standing model, comprising cold water tank capacity 15 litres and

hot water tank capacity 1.5 litres, cold water performance 8 LPH at 32°C

ambient, hot water performance 7.9 LPH, stainless steel body, overall

dimensions 1150 mm (H) × 325 mm (W) × 425 mm (D), unit weight approx.

27 kg, power consumption 600 W, full load current 2.8 Amps, suitable for

continuous commercial use, complete with all accessories, electrical and

A.1 MR plumbing connections, installation, testing and commissioning, Each 10 41300.00 413000.00

Warranty : OEM warranty of atleast 05 years to be provided within the quoted

rates. back to back OEM warranty + Contract Copy of warranty.

Design, Engineering, Supply & Installation of 500 LPH Water Treatment Plant

(WTP) comprising of Pre-Treatment System including Pressure Sand Filter

(12”x48” FRP Vessel with Manual MPV), Activated Carbon Filter (12”x48” FRP

Vessel with Automatic MPV), Ultra Filtration (4”x20”), UV Sterilization System

(SS 304, 30 mJ/cm²), Raw Water Pump (0.5 HP), Control Panel, SS 202 Skid

with CPVC/UPVC Piping, complete with all internal interconnections, media

A.2 MR (Sand & Activated Carbon), valves, gauges and accessories, suitable for 2 Each 1 182500.00 182500.00

m³/hr flow rate, operating pressure 3 kg/cm², complete as per technical

specifications.

Warranty : OEM warranty of atleast 05 years to be provided within the quoted

rates. back to back OEM warranty + Contract Copy of warranty.

Supply, fabrication, installation and commissioning of 1000 Litres capacity

vertical Stainless Steel Storage Tank, fabricated from SS 316 and 304 grade

(food grade) material, suitable for potable water storage, cylindrical type with

dished top and bottom, mounted on suitable MS support structure. The tank

shall be complete with inlet, outlet, overflow, drain connection, vent with

mosquito proof screen, level indicator, and necessary SS fittings. The tank shall

be internally and externally finished with smooth surface, leak-proof welded

joints, tested for water tightness, complete.

Warranty : OEM warranty of atleast 05 years to be provided within the quoted

rates. back to back OEM warranty + Contract Copy of warranty.

25 Digitally signed by RAJ PAL