Construction of parking facilities for E-buses at district notor garage, Leh

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed: All kinds of soil

Random Rubble masonry with hard stone from nallah in foundation and plinth including levelling up with cement concrete 1 :6:12 ( 1 Cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with cement mortar 1:6 (1 Cement: 6 coarse sand)

Providing and laying damp-proof course 5Crnm thick with cement concrete 1:2:4 (1 cement : 2 co.:Hse sand 4 graded stone aggregate 20mm nominal size

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size)

Centring and shuttermg including strutting, propping etc. and removal of form for columns, Pillars, Piers, Abutments, Pos ts and Strut

Centring and shuttermg including strutting, propping etc. and removal of form for· Lintels, beams, plinth beams, girders, bressumers and centilevers.

Centring and shuttermg including strutting, propping etc and removal of form for· suspended floors, roofs, landings, balconies and access platform.

Centring and shuttermg including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls. Under 20cms wide

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars.

Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring,shuttering and complete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) (A) Crushed

Dry stone filling /soling in horizontal layers any thickness including the cost of stone

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) (A) Crushed

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 coarse sand)

6mm cement plaster to ceiling of mix 1 : 3 (1 cement: 3 fine sand)

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and in-cluding priming coat with cement primer

Suppying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs manufacture from high tensile steel wire of adequate strength confirming to IS 4454 part1 and M.S. top cover of required thickness for rolling shutters 80x1.20 mm M.S. laths with 1.20 mm thick top cover

Providing and fixing ball bearing for rolling shutters.

Extra for providing mechanical device chain crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS :1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber I neoprene .. gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I panelling, C.P. brass I stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in Charge (glazing, panelling and dash fasteners to be paid for separately.)nodised aluminium (anodised transparent or -~ dyed to required shade according to IS: 1868, kg 371.95 minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber I neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item.)With float glass panes of 5.50 mm thickness (weight not less than 13 .. 50 kg I sqm)

carriage of sand /bajri average distance of 20km by MT

carriage of stone avergae distance 0f 25kms by MT

carriage of soiling stone avg distance of 15kms by MT

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc complete On steel work

Wiring for light point 6amp socket/exhaust fan point / call bell point /with 1.5 Sq.mm PVC FR insulated copper conductor single core in surface/recessed medium class PVC conduit, suitable size MS box and earthing the point with 0.75 Sq.mm. FR PVC insulated copper conductor single core cable as required.

Wiring for 16amp socket outlet with 2.5mm FR PVC insulated copper conductor cable in existing recessed PVC conduit including sheet as required.

Supplying and drawing circuit wire for light and 6/32amp socket outlet with 4.0sqmm FR PVC insulated copper conductor single core cable in the recessed/surface PVC conduit pipe as required.

Supplying and fixing of inch 3/4 inch PVC Conduit casing /capping along with accessories in surface /recessed including cutting the wall and making good the same in case of recessed conduit and sheet as required.

Supply and fixing of a 6amp 240 volt single pole grid plate mounted switch indicator with molded copper plate including recessed 2 inch M.S box complete as required including connection.

Supply and fixing of following single pole and neutral sheet steel MCB distribution board 240 volt on surface recess complete with tinned busbar neutral link earth bar, tin bar, detachable glaud plates, double door interconnected including pointing etc as required 16 way double door SPN.

supply and fixing of LED HIGHBAY light with fully vermin &weather proof/powder coated body /latest new generation accessories SS hardware/electrical safety class 1 digree of protection 1p66 /inbuilt driver operating directly on 100V-280V AC/LED USED ,OSRAM ,PHILLIPS , BRIDGELVX warranty 2years / powder LED with secondary optical lenses /cast aluminum /brdy/ total wattage 50W/ LED SMD HIGH POWER /COLOR TEMP 6500K/PF>0.90/WORKING VOLTAGE 100V TO 280V A 50HZ with surge protection:5KV INTERNAL suitable for parkiglots sheds etc

Supply of 1100 volt grade aluminium conductor PVC insulated and PVC sheathed / XLPE armoured power cables complete as per specifications as required and as below. A) 50sqm. 3.5core.

Providing and fixing of 100 amp four pole change over switch/iron clad switch fuse unit including drilling holes on the board, thimbling, connections, earthing the body etc. As required.

Supplying and fixing of 36 watt LED Street Light complete with GI pipe bracket duly embedded along the parapet/wall. Philips, Atcom.

Supply and fixing of miniature circuit breaker of following poles in the existing MCB DB completed with connections testing and commissioning etc, as required. Single pole 6/10/20 Amp

Supply and fixing of miniature circuit breaker of following poles in the existing MCB DB completed with connections testing and commissioning etc, as required. Double pole 40 Amp.

Supply and fixing of miniature circuit breaker of following poles in the existing MCB DB completed with connections testing and commissioning etc, as required. Double pole 63 Amp.

MOHAMMAD HANEEF

M/S DAMSNA ENTERPRISES

M/S TSERING SANGROP GOVT CONTRACTOR