REPAIR TO JOINERY FALSE CEILING ROOFING WALL PANELING ETC TO MD OTM ACCN AT AFS DINJAN UNDER GE AF MOHANBARI

Amount

Taking down Chowkhats or frames not exc. 1.5 sq.m each with shutters ( without taking off shutters from the frames) and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified.

Taking down chowkhats or frames exc. 1.5 sq.m and n exc 4 sq.m. each with shutters ( without taking off shutters from the frames) and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified.

Taking down shutters of any description n exc 1 sq.m each making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified.

Taking down chowkats or frame n.exc 1.5sqm each.and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified.

Taking down chowkats or frame exc 1.5 sqm but n.exc 4 sqm each.and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified.

Dismantling timber scantlings 40 sq. cm and over in section,unframed work in any position including removing of unserviceable material from work site all as specified and as directed.

Material and Labour for 2nd class hard wood (well seasoned) scantling clean sawn as in unframed work etc complete all as specified and directed.

Supply and fixing 35 mm thick Factory made plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 ( Part I) complete all as specified.

Material and labour 35 mm thick, IInd class HW(sal), factory made, Glazed and skeleton shutters , open rebated and prepared to receive glass, gauze, etc. (without sash bars) ,edges of framing plain,chamfered or rounded, fitted with cut and mitred beads for securing glass,etc;size of members of shutters as specified in SSR part-I, Section-8, clause 8.24 (a) supplied and fitted to chowkhats complete all as specified.complete all as specified.

Material and labour 35 mm thick, IInd class HW(sal), factory made, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into square with plain , chamfered or rounded, mitred and rebated sash bars, any numbers with edge of sash bars, forming moulded for window etc provided with stile and rails as specified in SSR part-I, Section-8, clause 8.24 (b) supplied and fitted to chowkhats complete all as specified.

M&L 2nd Class Hard wood ( Sal) Plain , solid , straight chowkhats and frames , wrought , framed rebated on the solid , rounded or chamfered , put together with glue, pinned at joints, supplied and fixed including tarring back of chowkhats with tar or coal tar black paint complete all as specified.

Supply and fixing Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

Material and labour for 125 mm x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plate, etc complete as specified.

Material and labour for 105 mm x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plate, etc complete as specified.

Supply and fixing Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars , dovetailed or welded complete including taking down existing old steel window all as specified.

Supply and fixing Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars , dovetailed or welded complete all as specified. Note:- Taking down of existing old already considered in item No. 16 of BOQ.

S&F in repair stainless steel wire mesh cloth 0.36mm nominal dia of wire and average width of aperture 1.4 cm and fixed with tinned tacks or galvanized wire staples complete all as specified

Supply and fixing for Steel ventilator with top hung shutter including hinges steel peg stay, steel handle complete including taking down existing old steel ventilator all as specified.

Material and labour mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified.

Supply and fixing stainless steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.4 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

Supply and fixing 4 mm thick sheet glass, ordinary quality, in squares not exceeding 0.5 Sqm in each pane, glazed with putty or fixed with beads complete all as specified.

Supply and fixing in repair 3 mm thick sheet glass, ordinary quality, in squares not exceeding 0.5 Sqm in each pane, glazed with putty or fixed with beads including hacking out old broken glass complete all as specified.

Supply and fixing solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with Mild steel square tube , supplying and fixing in opening as per specifications and drawings

Supply and fixing factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Supply and fixing butt Hinges, medium weight, cold rolled mild steel, 100 mm size complete all as specified.

Supply and fixing Aluminium handles, cast type anodised, 150 mm long all as specified.

Supply and fixing Aluminium handles, cast type anodised, 125 mm long all as specified.

Supply and fixing Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt complete all as specified.

Supply and fixing Aluminium, anodised, barrel tower bolts of extruded section and fixed, 100 mm length of bolt complete all as specified.

Supply and fixing Aluminium handles, cast type anodised, 100 mm long all as specified.

Supply and fixing butt Hinges, medium weight, cold rolled mild steel, 75 mm size complete all as specified.

S&F aluminium anodised sliding door bolt 250mm long with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

M&L for preparation of untreated new wooden surface of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint, over a coat of pink primer complete all as specified and directed

M&L for preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, compete all as specified.

Dismantling wall and ceiling boards ( fibre, pulp, insulation ,etc. ) or insulation boards/slabs/blankets, any thickness, including cover fillets including removing rubbish obtained from dismantling from worksite outside MD land at any distance specified.

Material and labour for non asbestos fibre cement building board, 4mm thick, fixed to aluminium frame work with screw as in ceiling in flat or sloping complete all as specified.

Supplying and fixing Aluminium anodised snap grid frame work as in false ceiling all as specified size of grid 605 X 605 mm with aluminium main T section of size 36.5 X 23.5 X 1.6 mm and cross T of size 23.5 X 23.8 X 1.6 mm with aluminium wall angle of size 36.5 X 23.5 X 1.6mm with suspender complete all as specified.

S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications including PVC cover fillet of matching colour, grid size not exc 800mm complete all as specified and directed.

M&L for preparation of untreated old wooden surface of any description Exc 10cm in width or girth one coat of varnish complete all as specified and directed

Taking down shutter of any description not exc 1 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws all as directed.

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws all as directed.

M&L for Anodized aluminum frame with powder coating not less than 50 micron thick for doors, windows, ventilators with one or more rebate including joining cleat for fixing etc complete all as specified

M&L for Anodized door shutters, aluminum section weighting 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handle four No’s in each door, hinges anodized aluminum snap beading screws etc complete all as specified with powder coating of Thickness not less than 50 micron.

M&L for Anodised aluminium window and ventilator shutters, sliding or fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified with powder coating not less that 50 micron.

Supply and fixing 5.5 mm thick sheet glass, ordinary quality, in squares not exceeding 0.5 Sqm in fixed in aluminium shutters, glazed with putty or fixed with beads complete all as specified.

Supply and fixing 5.5 mm thick sheet glass, ordinary quality, in squares exceeding 0.5 Sqm in fixed in aluminium shutters, glazed with putty or fixed with beads complete all as specified.

Supply and fixing 4 mm thick figured glass,pin head type, in squares not exceeding 0.5 Sqm in fixed in aluminium shutters, glazed with oil putty complete all as specified.

Supply and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment)

Supply and fixing in repair Mortice lock , 2 lever ,vertical type , size 100mm, complete all as specified

Supply and fixing in repair Prelaminated particle board 18/19 mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, as in kitchen cabinet shutter complete all as specified.

Material and Labour for Repair of Steel Windows by welding of hanging hinges ,window stays,handles etc making good to the steel welded surface by providing synthetic enamel paint in two coats over primer to match existing color complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in hold fast block, filling in pressed steel chowkats including necessary form work etc complete all as specified.

Supply and fixing of bands, straps,hold fast etc conforming to Fe-290 Gde-E-165

Dismantling of plain or corrugated, semicorrugated ,etc sheets in roof coverings including removing of unserviceable material from work site all as specified

Supply and fixed Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified.

Supply and fixed Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified.

S&F in repairs aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 3 , universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified.

M&L as in repair for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repairs, with & including replacement of floor tiles if any broken during repair work and making good disturbed surfaces matching to the existing surfaces complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

Material and labour for rolled mild steel as in roof truss, purlins, rails and fastenings and similar work including distance pieces, cleats etc conforming to Fe-410-W (Gde-E 250) including cutting and welding as required complete all as specified and directed.

Supply and fixing in repairs 140 mm floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), in floors, aprons etc .laid dry or laid dry and pointed including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.complete all as specified.

Material and labour for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screeding in CM 1:4 complete all as specified ( Note: screed bed shall also deemed to be included in the quoted rate by the contractor ).

Material and labour for glazed ceramic coloured tiles of size 300 mm x 200 mm x 7 mm thick on vertical surfaces such as dados , skirting and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick screeding in CM 1:4 complete all as specified.

Material and labour for vitrified ceramic (square/rectangular) light shade coloured polished tiles, (1st quality) area of each tiles not exc 0.36 sqm and 10mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white cement and pigment to match over 15 mm thick screeding in CM 1:4 complete all as specified ( Note: screed bed shall also deemed to be included in the quoted rate by the contractor ).

Material and labour for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over 20 mm thick screeding in CM 1:6 complete all as specified

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified.

M&L for PCC1:3:6 type C-2(40mm graded aggregate)as in boundary pillars, posts etc all as specified.

S K ENTERPRISE

R K CHAKRABORTY AND CO

KP GHOSH AND CO

D N ENTERPRISE

M/S N K SAI TRADING

FREEZCON