DAY TO DAY MAINTS OF INTERNAL ELECTRIFICATION INCLUDING ELECTRIC METERS, GYSERS AND CEILING FAN/WALL FAN/EXHAUST FAN IN MD AND OTM ACCN AT GE NASIRABAD

Amount

Taking down ceiling/wall/exhaust fans of any sweep dismantling blades carefully and cutting down and removing old copper wire winding of following size and type of fan of any make and rewinding with new super enamelled copper wire of existing gauge as per old copper winding including providing insulation by varnishing (golden), cleaning, oiling, greasing etc and assemble all the parts complete and testing in E/M store yard and hanging ceiling/wall/exhaust fans connecting up complete all as specified and directed :- Note :- (i)The super enamelled winding wire shall be any one make of Devidayal / Chetak / National of appropriate gauge as directed by Engineer-in-Charge. (ii) Any unserviceable parts required for replacement shall be measured and paid separately under respective item of 'BOQ' as supply only.

Ceiling fan of size 1200mm sweep

Ceiling fan of size 1400mm sweep

Ceiling fan of size 1500mm sweep

Wall fan of size 400mm sweep

Wall fan of size 600mm sweep

Exhaust fan of size 250mm sweep

Exhaust fan of size 300mm sweep

Exhaust fan of size 380/400mm sweep

Exhaust fan of size 450mm sweep

Taking down carefully ceiling fan/exhaust fan of following sizes from ceiling/wall after disconnecting the electric cable including dismantling carefully all parts of ceiling fan/exhaust fan and refixing the same to old or new location after cleaning, oiling, greasing and testing and making serviceable complete all as specified & directed :- Note : Any unserviceable parts required for replacement shall be measured and paid separately under respective item of 'BOQ' as supply only.

Ceiling fan of size 1200mm/1400mm/1500mm sweep.

Exhaust fan of size 250mm/300mm/380mm/400mm /450mm sweep

Supply only against Ser item No 1 & 2 here-in-before ball bearing double Z type, both end sealed suitable for ceiling/ exhaust fans of different sizes complete all as specified and directed :- MAKE:- NBC/TATA/SKF

Ball bearing No 6201

Ball bearing No 6202

Ball bearing No 6203

Ball bearing No 6204

Supply only against Ser item No 1.00 & 2.00 here-in-before gun metal bush of suitable size for 1200mm/1400mm/1500mm sweep of ceiling fans complete all as specified & directed

Supply only against Ser item No 1.00 & 2.00 here-in-before rotar shaft for following sizes of ceiling / exhaust fan complete all as specified and directed :-

Ceiling fan of size 1200mm/1400mm/1500mm sweep.

Exhaust fan of size 250/300mm sweep

Exhaust fan of size 380mm/400mm /450mm sweep

Supply only against Ser item No 1.00 & 2.00 here-in-before shackle assembly complete with rubber reel, brackets 3 X nuts & bolts with quarter pin suitable for fixing ceiling fan of any type sweep and make complete all as specified & directed.

Supply only against Ser item No 1.00 & 2.00 here-in-before three core copper flexible wire of size 23/0.0076 PVC insulated 1100 Volts, for ceiling fan / Exhaust fan complete all as specified and directed. Make :- Havells / Plaza / Finolex.

Supply only against Ser item No 1.00 & 2.00 here-in-before capacitor of following capacity, paper insulated with PVC/ aluminium body, ISI marked complete all as specified and directed. Make :- Havells /Bajaj / AMCAP.

Taking out old unserviceable capacitor and S & F capacitor of 2.5 Mfd capacity, paper insulated with PVC/ aluminium body, ISI marked complete all as specified and directed. Make :- Havells /Bajaj / AMCAP.

Supply only against Ser item No 1.00 & 2.00 here-in-before capacitor holding clamp suitable for any type of rod complete all as specified and directed.

S & F in repair mild steel clamp made out of flat iron of size 32 x 6mm of suitable length with nuts, bolts & washer for hanging of ceiling fan (any type, sweep and make) complete all as specified and directed.

S & F in repair plastic canopy suitable for ceiling fan of 1200mm/1400mm/1500mm sweep complete all as specified and directed. NOTE:- Make match with existing provisions

S & F in repair blade made of aluminium suitable for ceiling fan of 1200mm/1400mm/1500mm sweep complete all as specified and directed. NOTE:- Make match with existing provisions

S&F in repair stepped type (switch type) electronic ceiling fan regulator, flush type, AC, 230 volts complete all as specified and directed.

S & F in repair 15mm dia down rod made out of high density mild steel, 30cm long including drilling the hole for split pin and duly painted same as existing colour of fan complete all as specified and directed.

S & F in repair 15mm dia down rod made out of high density mild steel, 45cm long including drilling the hole for split pin and duly painted same as existing colour of fan complete all as specified and directed.

S & F in repair exhaust fan louvers for following size complete all as specified and directed :-

300/380 mm Sweep

450 mm Sweep

M & L for painting of ceiling fan of any sweep complete in situ with one coat of synthetic enamel white paint by spray painting including filling cavities with filler after cleaning of dust etc complete all as specified and directed.

M & L for painting of exhaust fan of any sweep complete in situ with one coat of synthetic enamel black / grey paint by spray painting including filling cavities with filler after cleaning of dust etc complete all as specified and directed.

S&F switch in repair piano flush type 5/6 amps, single pole one way 240 volts, 50Hz, AC, ISI marked complete all as specified and directed. Make : Cona / SSK / Havells

S&F in repair switch piano flush type 15 amps, single pole one way 240 volts complete all as specified and directed. Make : Cona / SSK / Havells

S&F in repair socket out let 2 in 1,multipurpose 3 pin 5/6 Amp flush type, 240 volts, AC complete all, as specified & directed. Make : Cona / SSK / Havells

S&F in repair socket out let 2 in 1,multipurpose 3 pin 15/16 Amp flush type ISI marked complete all, as specified & directed. Make : Cona / SSK / Havells

S&F in repair switch socket combination 2 in 1, 3 Pin 5/6 Amp flush type, 230 Volt AC complete all as specified & directed. Make : Cona / SSK / Havells

S&F in repair socket out let 2 in 1,multipurpose 3 pin 15/16 Amp, 230 Volts, AC< flush type ISI marked complete all, as specified & directed. Make : Cona / SSK / Havells

S&F in repair bell push piano flush button type 5 Amp, 240 Volt, 50Hz, AC, ISI marked complete all as specified and directed. Make : Cona / SSK / Havells

S&F in repair ceiling rose surface bakelite, 3 terminals, 63.5 x 17 mm complete all as specified & directed. Make : Cona / SSK / Havells

S&F in repair bell ding dong type AC 240 volt complete all as specified and directed. Make : Cona / SSK / Havells

S&F in repair modular switch 1 way 6/10 Amp, 1 moudle, 230 Volt, AC 50Hz complete all as specified and directed. Make : Cona / SSK / Havells

S&F in repair modular switch 1 way 15/16 Amp, 1 moudle, 230 Volt, AC 50Hz complete all as specified and directed. Make : Cona / SSK / Havells

S&F in repair modular socket 15/16 Amp, 2/3 pin combined 2 module, 230 Volt, AC, 50 Hz complete all as specified and directed. Make : Cona / SSK / Havells

S&F in repair modular socket 5/6 Amp, 2/3 pin combined 2 module, 230 Volt, AC, 50 Hz complete all as specified and directed. Make : Cona / SSK / Havells

S&F in repair modular ceiling fan regulator, AC 120W, 2 moudle complete all as specified and directed.

S & F in repair top plug three pin 15 Amp complete all as specified and directed. Make : Cona/ SSK/ Havells

S & F in repair lamp holder PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. Make : Cona / SSK / Havells

Supply and fix in repair LED driver suitable for 2x2', 36 W LED light fitting, 240 volts. 50 Hz complete all as specified and directed. MAKE: Bajaj/Wipro/CG/Philips/Havells as approved by GE.

Supply and fix in repair single core 1.5 sqmm PVC insulated and unsheathed stranded copper conductor complete all as specified and directed.

Supply and fix in repair single core 2.5 sqmm PVC insulated and unsheathed stranded copper conductor complete all as specified and directed.

Supply and fix in repair single core 4 sqmm PVC insulated and unsheathed stranded copper conductor complete all as specified and directed.

S&F in repair MCB single pole 240 volt 10 KA breaking capacity, 5 to 32 Amp conforming to IS 8828 of 1996, Curve 'C' including connection with suitable size aluminium lugs complete all as specified & directed. Make : Legrand/ Siemens/ Schneider

S&F in repair MCB single pole and neutral 240 Volt 10 KA breaking capacity, 25 to 32 amp conforming to IS 8828 of 1996, Curve 'C' including connection with suitable size aluminium lugs complete all as specified & directed. Make : Legrand/ Siemens/ Schneider

S&F in repair MCB triple pole and neutral 240 Volt 10 KA breaking capacity, 40 to 63 amp conforming to IS 8828 of 1996, Curve 'C' including connection with suitable size aluminium lugs complete all as specified & directed. Make : Legrand/ Siemens/ Schneider

S & F in repair LED tube light fitting box type in acrylic linear tube (1x18 watt), 230 V for single LED tube light including 1x18 W LED retrofit bar professional CW 6500 K cover channel, bipin holder, LED power driver, connector block, etc complete with all accessories internally prewired and incuding connecting up with twin core twisted flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed. Make : Bajaj Cat part No BLRB 18 W CW for tube BLRB - DB 118 for batten, Havells cat part No LHLDDBXEUL7Z018 (for tube) LHFYBP1TB1W20 (for batten), Syska cat part No SSK - T-8-18W (tube) SSK-TL-22 F (batten).

Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete (Make : Bajaj/ Havells/Philips as approved by GE

S&F LED light fittings suitable for & including 1x 10 W bulk head luminaries, complete with all accessories and including connecting up with three core copper conductor cable with suitable size of 230V, 50 Hz complete all as specified and directed. Make Bajaj Code No BIBWP 10W LED , Havells Cat part No LHEOAP7UZ6W010, crompton greaves as approved by GE

Supply and fixing in repair testing and commissioning energy saving street light luminaire 35 watt LED , pressure die cast housing with epoxy powder coated with colour finish and prismatic poly carbonate coverlic cover complete, IP 66 protection incl connecting with three core copper flexible wire from ceiling rose to connector of light fitting complete all as specified and directed by Engr-in-Charge. Make :- Bajaj / PHILIPS/ HAVELLS as approved by GE.

Supply & Fix in repair street light bracket made of 32mm GI pipe, 1.2m length fixed with two nos of clamp, nut and bolts complete all as per specified and directed.

S & F in repairs heating element round / triangle base including rubber ring, washer, holding clamps and nuts of following capacity complete all as specified and directed. Make :- BAJAJ / RECOLD / THEETA or any other ISI marked as approved by GE.

1.50 KW capacity

2.00 KW capacity

S & F in repairs thermostat of temperature variation ranging from 0 degree centigrade to 80 degree centigrade suitable for 25 litres and 50 litres capacity geyser complete all as specified and directed. Make :- Ranutrol / Indofoss or any other ISI marked as approved by GE.

S & F in repairs heating element 2KW with inbuilt thermostat including rubber ring, washer, holding clamps and nuts of following capacity complete all as specified and directed. Make :- BAJAJ / RECOLD / THEETA or any other ISI marked as approved by GE.

Taking down old unserviceable PVC connection and S & F PVC connection, Mesh type heavy duty 15 mm bore, 45 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed

Taking out old unserviceable apparatus plate assembly and supply & fix new apparatus plate with rubber gasket, nuts and bolts of suitable size for following capacity of Storage type heater (geyser) vertical type complete all as specified and directed :-

25 Litres capacity

50 Litres capacity

M & L for preparation of old outer surfaces of storage type heater (geyser) of following capacity, type and applying two coat of synthetic enamel paint (1st quality) of approved tint by spray and including writing MES No, figure (BLOCK, ROMAN or INDIAN) with black synthetic enamel paint (1st quality) 2cm high of complete all as specified and directed :-

25 Litres capacity

50 Litres capacity

S&F in repair geyser inner tank of following capacity made out of stainless steel sheet of existing gauge confirming to IS 6/8/9 hole as per existing geyser complete all as specified and directed :-

25 Litres capacity

50 Litres capacity

Disconnecting & taking down carefully storage type water heater (geyser) 25/50 Ltr capacity, taking out heating element, thermostat and cleaning inner container by removing all scales etc and refixing of heating element, thermostat and reconnecting the same complete all as specified and directed.

Supply & Fix in repair 15mm dia down rod of length as per site requirement, made out of high density mild steel, including drilling the hole for split pin and duty painted same as existing colour of fan complete all as per specified and directed.

S & Fix in repair LED indicator red/green colour of any type of geyser complete all as per specified and directed.

Supply & fixing in repair modular white cover plate with frame for fixing of modular switches of following :- Make: Cona / SSK / Havells

12 module

8 module

6 module

4 module

3 module

2 module

1 module

S & F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB SP `C' series for geyser & AC complete all as specified and directed.

PD GUPTA AND COMPANY

M/S SHIVA TRADERS

KIRTIMAN ENTERPRISES

Anu Trading Co

AIRCOM