NIT No. 05 (20-21) Item No. 3

Renovation of Panel board no. 01 to 04 suitable for 415 Volts,3 Phase,50 Hz,4 Wire System for operation of 10HP Submersible Pump set. star delta timer -1No. Indicating lights RYB-1Set, on-off- 1set,Single phase preventer- 1No, Phase sequence relay-1No. (Auto Manual Reset, 2CO Contact)-1No. Timer/Relay: - L&T/Siemens. Phase Preventer:- L&T/Siemens. Indicating Lights:- Havells/L&T

Supply of PVC insulated PVC sheathed, copper conductor( flexible) cable for submersible pump motor, Size 3 core x 6 Sq mm ,1100 Volts, conforming to IS 694 . Make:- Havells/Finolex/Polycab DJB approved make

Supply of LT power Aluminum cable, solid, XLPE, insulated PVC armoured 650/1100 V size 3.5 x 25 Sq mm. Make:- Havells/Gloster/Grandey/ DJB approved make

Supply of electrical insulating mat confirming to IS 15652/2006 (Superceding IS: 5424 - 1969) B.I.S + CPRI + NTH + ERDA approved Dielectric strength 65 KV size 1M X 2M and 3.0 mm thick. Make: - Jyoti/DJB approved make

Supply of electronic dozing pump (4 LPH, 10 Bar) electrically operated 230 volts, 50 Hz supply chemical grade tank of 100 Ltrs. with pipe etc. Make: - Milton Roy/ Clomax/ DJB approved make.

Supply of Sodium Hypochlorite Solution having 9% to 12% availability of chlorine, packed in 35 Ltr PVC disposal jerry cane as per IS: 11673: 1972. Make DCM/DJB Approved.

Pressure Gauge of 150mm dia. size having required range with accessories such as GI fittings, Bib cock etc. required complete the work. Make:-Hguru/fibeg/DJB approved make.

Supply of 80mm dia. B class GI pipe length 3 Mtr. With duly Welded flange in both sides, complete with cutting of flange for cable and welded support in both flanges. Make: - Jindal/ Parkash/ Tata/DJB approved make.

Fabrication/ Supply of ventury assembly 80 mm dia. with complete accessories as required at site.

Workmanship Charges Fixing/Erection/Installation of E&M equipments, accessories, testing and commissioning on load with satisfactory functioning of Pump. The work includes all sundry required items for completion of work, i.e. loading, unloading, cartage, making good all damages caused during installation and restoring the same to their original finish as required, adequate safety provision, safety measures while executing the work or wherever necessary so as to avoid accident. The components of the installation shall be of such design so as to satisfactory function under all conditions. The tube well will be commissioned on automation mode and timing to be set as per direction of Engineer-in-Charge. The all sundry items which are useful & necessary for operation of Tube well in automation mode shall be deemed to have been included, whether such items are especially in specification or not.

Monarch Engineering Works