CERTAIN MISC PETTY B/R DAY TO DAY REPAIR WORK TO

Amount

Petty repairs to joinery works such as easing of doors, windows, kitchen cabinets , fixing builder hardware gauge etc by providing glue nails and screws to the satisfaction of user and rectifying other misc minor carpentary works assigned by the Engneer In Charge. Notes : (i) Replacement of builders hardware if required shall be measured and paid as supply only separately. (ii) Contractor or his authorised representative will collect such type of complaints from AKASH VIHAR complaint cell of AGE B/R - I at 9.00 AM on daily basis except sunday /Holiday. No extra payment shall be made on account of collection of complaint. (iii) Complaint must be attended within 24 hours of receipt of complaint else recovery of Rs. 100/- per complaint/ per day will be Charged.

Petty repairs to plumbing/internal water supply works such as repair to leaking bib taps, pillar taps, mixers, stop cocks by tightening and providing washer repair to float valves, low leveled cistern by mixture adjustments leaking water supply lines by tightening the GI fitting or fixing W/S or sanitary fixtures using thread/teflon taps and including small GI fittings such as GI elbow, socket, union etc as required at site to the satisfaction of user as assigned by the Engneer In Charge. Notes : (i) Replacement of plumbing/ watewr supply fittings if required shall be measured and paid separately as SUPPLY ONLY. (ii) Contractor or his authorised representative will collect such type of complaints from AKASH VIHAR complaint cell of AGE B/R - I at 9.00 AM on daily basis except sunday /Holiday. No extra payment shall be made on account of collection of complaint. (iii) Complaint must be attended within 24 hours of receipt of complaint else recovery of Rs. 100/-per complaint/ per day will be Charged.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed.

M & L for Demolition of Cement Concrete floor/ terrazo tile floor of any description and in any position complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) finished fair & even as in Sub base flooring complete all as specified & directed.

M&L for glazed ceramic tiles, coloured, of size 350 x 250 x 7mm / 450x350x7mm, as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:3 complete all as specified & directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified & directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in skirting surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 10mm thick backing coat in cement mortar 1:3 complete all as specified & directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified & directed.

Dismantling of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar complete all as specified and as directed.

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished)in steps, jambs, pillars, window- cills, cooking platforms and including screed bed of 20mm thick in cement motar (1:4) with pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Rounding to edges of stones slabs on edges,such as in steps, cooking platforms and similar situations all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 250 lit n exc 500 lit and from mouths of circulating pipes, etc complete all as specified and as directed

Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 500 lit n exc 1000 lit and from mouths of circulating pipes, etccomplete all as specified and as directed

S&F in repair rotational moulded polyethylene water storage tanks 500 litre capacity ISI MARKED (cylindrical vertical with closed top) including hoisted and fixed in position all as specified in SSR Pt-I including dismantling and taking down existing water tank complete all as specified & directed.

S&F in repair rotational moulded polyethylene water storage tanks 1000 ltrs ISI MARKED (cylindlerical vertical with closed top) hoisted and fixed in position all as specified in SSR part I inclding dismantaling of existing damaged water tanks complete all as specified & directed.

S&F 20 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe as in repairs complete all as specified & directed.

Supply only 20mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball for new tanks screwed for iron pipe and fixed (minimum weigth 455gms) complete all as specified & directed.

Supply only 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

Supply only 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210gms) complete all as specified and directed.

S&F in repair 25mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210gms) complete all as specified and directed.

Taking up or down GI tubing 15 mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed.

All as per Item No 22 above but 20 mm bore.

All as per Item No 22 above but 25 mm bore.

S&F 20mm (OD)CPVC Pipe SDR 11 & Plain CPVC SDR 11 Fittings such as Tee, Elbow, nipple and small piece of pipe in trenches or fixed to wall/Ceiling complete all as specified and as directed by Engineer-in-Charge.

S&F 25mm (OD)CPVC Pipe SDR 11 & Plain CPVC SDR 11 Fittings such as Tee, Elbow, nipple and small piece of pipe in trenches or fixed to wall/Ceiling complete all as specified and as directed by Engineer-in-Charge.

S&F GI pipe medium grade 25mm bore fixed to wall and ceiling or laying in floors, with all new fittings as required at site complete.

S&F in repair WHB vitreous china (flat back or angle back type ) ,including cutting for pinning in ends size 550x400 mm including brackets ,waste pipe ,coupling ,PVC connection pipe and CP piller tap complete all as specified and directed.

S&F in repair WHB vitreous china with pedestal ,including cutting for pinning in ends size 550x400 mm including brackets ,waste pipe coupling ,PVC connection pipe and CP piller tap complete all as specified and directed.

S&F in repairs Vitreous China Indian type water colset (Squat pattern) white complete excluding flushing cistern and flush pipe "Orissa" pattern size 580x400 with integral footrest including connection to trap, and to flushing pipe, anti syphonage pipe etc complete including making good to floor complete all as specified and directed.

S&F in repairs wash down water closet (pedestal pattern) white with plastic water closet seat cover closed pattern incl P or S trap with flat bottom and mild steel chromium plated or aluminised hinging device and excluding flush pipe and flushing cistern complete all as specified and as directed.

S & F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density PVC. 32 mm dia all as specified and directed.

S&F in repairs PVC cabinet with door fitted with looking mirror size 422mm x 622mm(Make: Prayag cat no : 555 or equivalent in M/s Atul Brand, Bombay & M/s Modi) all as directed by Engr-in-charge.

Supply only 125 mm size fixed in repairs brass chromium plated shower roses /shower arms with or without swivel joints complete all as specified and directed.

Supply only 15mm bore Chromium plated fancy type bib taps with wall flange, cast copper alloy with round operating knob screwed down, screwed for iron pipe or for brass ferrule and fixedin repairs complete all as specified & directed

Supply only 15mm bore PTMT Bib taps standard any colour screwed down for iron pipe minimum weight 90 gm complete all as specified and directed.

Supply only 15mm bore pillar tap cast copper alloy with capstan head ,chromium plated screwed down high presure with or with out lettered fixed with iron pipe complete all as specified & directed.

Supply only Angle cock fancy type brass chromium plated screwed one ends for iron pipe or for unions and fixed 15mm dia pipes, complete all as specified and as directed.

Supply only 15 mm bore stop valves, fancy type , cast copper alloy chromium plated, screwed down high pressure , with crutch or butterfly handle , screwed both ends for iron pipe or for unions all as specified and directed.

Supply only CP health faucet with 01 mtr tube and hook complete all as specified and directed.

Supply only Two way bib cock 15 mm dia chromium plated complete fancy type of branded as specified and directed.

S & F brass CP mixer for mixing Hot and Colder water scerewed down for iron pipe and fixed for 15mm bore fixed in repairs all as specified.

Supply only PVC connections 15mm size with PTMT nuts of length 600 mm.

S&F in repair High density polyethylene pipe (HDPE) 40mm bore of pressure rating 6kg/cm2 fixed to wall, ceiling or laid in floor etc complete all as specified and directed.

S & F Tubular Towel rail 20mm dia D type 60 cm long fixed between flanges in repairs with brass chromium plated incl all fitting & fixtures complete all as specified

Supply only Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.

Supply only Grating 150mmx150mm made out of PTMT complete all as specified and directed.

Supply only Grating doom 125mm dia with waste hole of PTMT (Minimum weight 40gms) complete all as specified and directed.

Supply only Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

Supply only PTMT waste coupling of 32 mm dia (half or full thread) including taking down old coupling of any description complete all as specified and directed.

Supply only Plastic EWC Seat cover hygenic type for pedestral pattern including all fitting complete all as specified and directed.

Supply only PVC waste pipe, 32 mm dia, 750mm long, suitable for wash basin & Kitchen sink complete all as specified and as directed.

S&F in repairs sinks with draining board made of stainless steel 1 mm thick kitchen with plugs , washers and waste , including bedding in cement mortar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe , overall size 915mm x 460 mm & bowl size 410mmx330mm x 160mm complete all as directed.

S&F in repairs stainless steel Kitchen plate rack of grade 304, weight not less than 3 kg and size 34"x35"x9" all as specified and directed by Engineer in charge.

Taking down100mm bore CI pipes (any size or pattern) and in any position, including all fittings etc as in soil/waste pipes complete .

Taking down 75mm bore CI pipes (any size or pattern) and in any position, including all fittings etc as in soil/waste pipes complete .

S&F 110mm bore dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall complete all as specified and directed.

S&F 75 mm bore dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall complete all as specified and directed.

S&F 110 mm bore dia PVC (SWR) bends of any radius with access door complete all as specified and directed.

S&F 75 mm bore dia PVC (SWR) bends of any radius with duck foot or heel rest fitted with oval access door complete all as specified and directed.

S&F 110 mm bore dia PVC (SWR) branch single (Single Y) equal or unequal complete all as specified and directed.

S&F 75 mm bore dia PVC (SWR) branch double (double Y ) equal or unequal complete all as specified and directed.

S&F in repair PVC ( SWR) floor trap,75mm outlet dia plain with grating including joining with solvent cement all as specified and directed.

Taking down Chowkats with shutters (Without taking off shutters from frame) n exc 1.5sqm each complete and removal from site.

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions. The door frame shall be tied to the wall using 75/100mm long MS screw complete as directed by Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. M S tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS fram welded/sealed to the stile and rails with suitable PVC sheet beading and jointed together with solvent cement complete as directed by Engineer-in-Charge.

S&F 100mm long MS Medium weight Butt hinges cold rolled , fixed complete all as specified and as directed.

S&F 100mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed in panels of joineries with stainless steel wire staples fixed in repair complete all as specified and as directed.

Hacking out old broken glass ( any thickness, size, quality or description) from metal frame frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones including supply and fix 4mm thick sheet glass ordinary quality in square or n. exc 0.5 sqm each pane up to 4th floor complete all as specified and directed by Engr-in-charge.

Supply only 150 mm aluminium anodised barrel tower bolts, of extruded section all as specified and directed.

Supply only 200 mm aluminium anodised barrel tower bolts, of extruded section all as specified and directed.

Supply only 300mm aluminum anodised sliding door bolts, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alluminium alloy complete all as specified and directed.

Supply only mild steel butt hinges of 75 mm size medium weight cold rolled by welding to existing frame complete all as specified and directed.

S&F only mild steel butt hinges of 100 mm size medium weight cold rolled by welding to existing frame complete all as specified and directed.

Supply only 150 mm extruded aluminum alloy handles, fabricated type anodized complete all as specified and directed.

Supply only 100 mm long safety type aluminium anodised hasp and staple with hinge pin including bolt to hinge plate complete all as specified and directed.

Supply only floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140 mm anodised with hard drawn steel spring complete all as specified and directed.

Supply only mild steel helical door spring 300mm ordinary rat tail rod pattern springs including roller plate complete all as specified and directed.

Supply only aluminium( Extruded section) body door closer hydraulically regulated , designation No. 3 universal type , suitable for door shutterof 851 to 1000mm in width complete all as specified and directed. Make : Dyna and equivalent ISI marked

Supply only Brass Mortice lock 4 leavers vertical type size 100mm complete all as specified and as directed.

Supply only of powder coated curtain rod brackets suitable for fixing 1" dia size curtain rail all as specified and as directed.

S&F in repairs 20 mm dia anodised aluminium anodised powder coated tubular curtains rod including fixing brackets complete all as specified and directed.

M&L necessary weldings in Repairs 2.5 cm but n exc 5cm thick of metal to be welded n. exc. 6 mm.

Taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc as in internal and external surfaces of man holes, septic tank, filter bed etc incl removing of debries complete all as specified and directed.

M/L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick or concrete and finishing the surfaces even and smooth without using extra cement in patch work at various places upto 8th storey incl necessary formwork complete all as specified & directed.

M&L Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces including finishing even and fair. complete all as specified and directed.

M&L Rendering 10mm thick in cement mortar 1:3 as in ceiling concrete surfaces including finishing even and fair. complete all as specified and directed.

M & L for applying three coats of white wash on wall including preparation of newly plastered surfaces complete all as specified and as directed.

M & L for applying two coats of distemper oil bound distemper on walls over a coat of primer including preparing newly plastered wall surfaces complete all as specified and as directed.

M & L for applying three coats of white wash on ceiling including preparation of new plastered surfaces complete all as specified and as directed.

M & L for two coats of cement base paint over a coat of primer including preparation of newly plastered surfaces of walls complete all as specified and as directed.

Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation or manholes etc., and area n.exc. 10 Sq.m on plan and getting out in hard/dense soil all as specified and directed.

Excavation in trenches n.exc. 1.5 m wide and exc. 1.5 m and n. exc. 3.0 m in depth for foundation or manholes etc., and area n.exc. 10 Sq.m on plan and getting out in hard/dense soil all as specified and directed.

Returning, filling in with approved soil obtained from excavation including spreading levelling, watering and well ramming in layers n.exc. 25cm thick all as specified and directed.

Removing the excavated soil to a distance exc 250 m and n.exc 500 m and depositing where directed all as specified.

Demolition and breaking up drain pipes(salt glazed ware,AC or reinforced concrete) set in cement mortar including concrete bedding and haunching complete all as specified and directed for 150mm dia pipe all as specified and directed.

All as per item no 100 above but 200 mm bore pipe.

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 (type D-2) 150mm bore drain pipe all as specified and directed.

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 (type D-2) 200 mm bore drain pipe all as specified and directed.

M&L for SWG drain pipe grade 'A' of 150 mm internal dia laid in trenches and jointed in cement mortar 1:1 all as specified.

M&L for SWG drain pipe grade 'A' of 200 mm internal dia laid in trenches and jointed in cement mortar 1:1 all as specified.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting ou existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm dia SWG pipe all as specified and directed.

Description All as per item no 106 above but 200 mm dia.

M&L for Cleaning of all blockage of Nahani trap/ floor trap, bottle trap, gully trap P or S traps of WCs, 100/75mm dia CI pipes upto 1st MH, CI/SGSW pipes between gully trap and 1st MH, CI/PVC 'T'/ Door bends etc to maintain internal sewage system and any type of sewage line ie branch sewer line, main sewer line etc, manholes of any section and depth, any situation by way of cleaning/disludging manholes by using any type of manually,mechanically or by way of any other suitable means including foreign materials as well as rodding of sewer lines and between successive from block manholes where required and ordered by Engineer-in-charge and keeping the sewage line functional cleaning trap,water closet,soil waste/vent pipe,gully traps upto final drop out let into septic tanks or central sewage system treatmenting in other adjoining Zone/Area of into sewage well (working in foul condition with taking precautionary measures) equipment as required or applicable all as specified and directed.

Manholes of any size and depth and removing the sludge/material and depositing outside the MOD land complete all as directed by Engr-in-Charge. NOTE : (i) Sufficient number of persons working under the area Akash Vihar (AF) camp cell in charge JE in all working days from 08.30 Hrs to 16.30 Hrs with necessary T&P. (ii) Complaint must be attended within 24 hours of receipt of complaint else recovery of Rs. 100/-per complaint/ per day will be Charged. (iii) The cost of transportation (to and fro) and other necessary T&P, flexible rods, wires, bamboo sticks and other equipment and safety gear shall be arranged/ bought by contractor to complete the job and no extra cost cost shall be paid to the contractor in this effect. (iv) Apprroximate length of sewage line is 1800 Rm. (v) Apprroximate No. of MH IS 400Nos. (vi) Apprroximate No. of Md Accn is 460 No. and OTM 20 No.

Cleaning and de-sludging of existing septic tanks / deep manholes up to 4 metre deep including taking out sewage water / sludge in any form alongwith all other foreign materials by mechanical equipment or manually or by way of any other suitable means including removal of sludge and other foreign materials out side the MD land by any means complete(working in foul condition) all as specified and directed.

Removal / taking out of sludge muck consisting of loose aggregate sediments mud etc from filter bed and refilling the same after cleaning/washing into the filter bed.

Excavation in trenches for exposing the sewage line and breaking SGSW pipe horizontally on top to help cleaning the sewer line from Manhole to the location where the SGSW pipe is broken and covering the broken portion of SGSW pipe from the top and sealing the opening in CM (1:3) including returning filling and ramming in trenches with excavated earth and disposal off surplus earth to a distance not exceeding. 50 m complete all as directed by Engr-in-charge (irrespective of depth and type of soil).

Demolition of existing SWSG gully trap including PCC kerb etc and supply and fix SWG gully trap square mouthed 100mm size set in PCC (1:3:6) type C1 block measuring 450mm and 100mm thick bed concrete and jointing to drain pipe in CM (1:1) including 100x150mm high PCC kerb in (1:2:4) type B1 with CI perforated grating 150x150mm bituminous coated including disposal of waste/sludge complete all as directed.

Demolition of PCC around floor trap and dismantling existing floor trap and cleaning the blockage of pipe from floor trap to gully trap and supply and fix PVC floor/Nahani trap in existing pipe and embedding in CM (1:1) including lowering or raising with vertical piece with PVC pipe for jointing trap and fixing gratings at true level of floor complete all as directed.

Demolition of Brick / stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles.

M & L for Pre-cast cement concrete block masonry type B1 1:3:6 (20mm agg) with solid blocks, exc 10 cm in width and setting in mortar 1:6 complete.

Material and Labour for Cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping, benching including finishing the concrete surface even & smooth without using extra cement.

Material and Labour for forming fair finish to channel in manholes using extra cement.

Taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc as in internal and external surfaces of man holes, septic tank, filter bed etc incl removing of debrie all as specified and directed.

Material and Labour for rendering 15mm thick in CM 1:4 on brick or cement concrete surfaces & finished even and smooth without using extra cement. (WPC will be meausred and paid separately)

Supply only water proofing compound.

Material and Labour for PCC (1:3:6) type C2 using 40mm graded stone aggregate in foundation.

Demolition of reinforced cement concrete of any descripition and any position not other wise specially provided all as specified and as directed.

M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for manhole cover & septic tank covers slabs etc including necessary form work and set in CM (1:4) all as specified and directed. Note:- Reinforcement will be measured and paid seperatel.

S/F MS TMT bars 10 mm dia and over for reinforcement etc, cut to length, bent to shape required including cranking, bending sprially for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified & directed.

S/F MS TMT bars 6mm to 8mm dia and over for reinforcement etc, cut to length, bent to shape required including cranking, bending sprially for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Taking down rain water pipes / Drain pipes/ Soil waste pipes of any description and any size any pattern incl all fittings heads, shoes bends etc all as specified and as directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 110 mm all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 75 mm. all as specified and directed.

S&F branch pieces, single (equator unequal) ordinary or inverted (size or socket type) or with parallel branches with oval access door bore of pipe 100mm. all as specified and directed.

S&F PVC(SWR) bends 110 mm dia.

S&F PVC(SWR) bends 75 mm dia.

S&F PVC(SWR) junction double,(double T),equal or unequal. 110 mm dia with access door.all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm dia complete all as specified and directed.

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement in repair complete all as specified and directed.

S&F for PVC (SWR) gully trap of 125/110 mm dia set and jointing wilh solvent cement complete all as specified and directed.

S&F straps, supports or stays for rainwater, ventilating pipes, including bolts, if required with MS Flat Iron brackets for fixing PVC (SWR) pipes of 110mm dia single socketed in any length with @ 2.0 mtr interwell fixed to walls complete all as specified and directed..

Removing building materials etc to a distance of 5km, beyond the lead included in the rates, including loading, unloading and stacking at the destination.

sri sai construction (BID ID -3126819)

docileworx (BID ID -3126202)