Different type work against Business Plan Scheme year 2019-20 in the area of Alambagh under jurisdiction of E.E., EUDD., Alambagh, LESA, Lucknow

Amount

Safe Loading, Carriage & unloading of following Materials from Centre Store to Pit Site/J.E. Dump Store.

a- Line Material

b- ST Pole 9/11 Mtr.Long

c- ABC 3x120/1x95/1x16 sq. mm.

d- T/F 630 KVA

e-LT PVC cable 1x630, 3.5x400 sq. mm.

f- 11 KV XLPE Cable 3x120 sq.mm.

Dragging of ST/PCC Pole digging of pit erection of sub-station type double pole structure on ST/PCC Pole with fixing of necessary item such as Top Channel, along with grouting (As per RESPO Norms) Dropper Channel, 11 pin insulator with Pin & 11 KV Disc Insulator with fitting, DO Fuse set its ramming, as per RESPO Specification. Only Pole and insulator will be Provided by the Department.

Dragging of ST/PCC Pole from Dump Store to pit site, diging of pit erection and grouting (As per RESPO Norms) of LT support suitable for laying of ABC Line on 9 Mtr Long ST/PCC Pole by providing of necessary eye hook/Lt Shackle insulator with Clamps and its accessories etc. as per RESSPO Specification. Only Pole will be Provided by the Department.

Grouting & Nuzzling of 11 KV stay set complete including fixing of necessary clamps. Accessories required including its grouting by civil material (Sand, Brick blast & cement). All material except stay wire shall be supplied by the contractor.

Proper laying & commissioning of (3x120/1x95/1x16 sq.mm) XLPE Aerial Bunched Conductor. Only ABC Provided by deptt.

Pipe type earthing of T/F with 60 Fit Deep borring and providing GI Pipe 1.5" dia ("B" Class) and earthing must be joint by G.I. Strip of 32x5 mm thick long attached with nut & bolts and GI pipe cap. All material and labour shall be supplied the contractor.

Construction of T/F plinth of size 2x2x1.2 mtr with the help first class brick & masonary in the ratio 1:4 cement & sand coarse. Filling the structure completely per norms with RCC to 1:2:2 cement & stone grit with MS bar and MS channel for resting transformer.

Wiremess fencing of 11/0.4 KV S/S shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of wire mesh. Rectangular welded type wire mess of size 50x25 made of 12 S.W.G. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I.

Construction of masonry/metalic type distribution pillar of size 1x1.5x2.5 mtr. with supply & fixing of fabricated 4 nos. doors (2ft.x4ft.) made of BP sheet of 18 SWG with locking arrangement, 2 Nos. Straight MS angle 50x50x6mm (1800 mm olng) 2 nos. 500 Amp, 3 Nos. 300 Amp henely Type Tailess Funse Unit, 3 Nos coper bus bar of size 1000x50x6 mm and one No. Alum busbar 1000x50x6 mm including all civil material required for work. All material shall be supplied by contractor.

Fabrication, errection & commissioning of 630 KVA T/F on Plinth with all accessories. All material except 630 KVA T/F shall be supplied by the Contractor.

Laying and Fixing of LT PVC cable 1*630/3.5x400 sq. mm with required Allu. Lugs and L-Piece as Per RESPO Norms. Only PVC Cable shall be supplied by Deptt.

Laying of 3X120 sq.mm 11 KV XLPE cable by drill method as per RESPO Norms. Only 11 KV XLPE cable supplied by Department.

Cable Hosting of 11 KV 3x120 sq. mm XLPE Cable at the following including jumpering etc complete with help of GI Pipe as Per RESPO Norms. GI pipe and other required material shall be supplied by contractor.

High pressure testing of 11 KV 3x120 XLPE cable along with arrangement of High Pressure equipment.

Supply and fixing Eye Hook Clamp as per RESPO Norms.

Supply and fixing Dead End Clamp Clamp as per RESPO Norms.

Supply and fixing LT Insulated piercing connector Clamp as per RESPO Norms.

Supply and fixing Hanely type fuse unit Clamp as per RESPO Norms.

Supply and fixing Cooper Bus Bar unit Clamp as per RESPO Norms.

Supply and fixing Aluminum Crimping lugs 240 sq. mm as per RESPO Norms.

Supply and fixing Aluminum Crimping lugs 630 KVA mm as per RESPO Norms.

Supply and fixing Copper L Piece 630 KVA Transformer per RESPO Norms.

Construction of LT Cable Stand as per RESPO Nroms. All Material shall be supplied by contractor.

Fixing of Single/Three Phase distribution boxes/Kiosk on the LT poles including all clamps and material required for mounting connections & sealing. Only distribution box Shall be supplied by deptt.

VIBHU ENTERPRISES