MP1/QC MEASURING TOOLS/YARD/CMSRU.

Vernier Caliper 0-150 mm manual type standard brand

Vernier Caliper 0-300 mm manual type standard brand

Vernier Caliper 0-150 mm digital type standard brand

Feeler gauge 3"long (0.01 to 1 mm) standard brand

Feeler gauge 3"long (0.01 to 2 mm) standard brand

Feeler gauge 12"long (0.01 to 1 mm) standard brand

Feeler gauge 12"long (0.01 to 2 mm) standard brand

MEASURING TAPE 3 M LONG

MEASURING TAPE 5 M LONG

STEEL RULE 15 CM

STEEL RULE 30 CM

DENTAL MIRROR

THERMAL TEMPERATURE GUN 0-500 C

BORE GAUGE SET (0-25,25-50,50-75,75-100,100-200,200-300,300-400,400-500mm)

INSIDE MICROMETER SET (50-300,50-500 mm)

OUTSIDE MICROMETER SET (0-25,25-50,50-75,75-100,100-200,200-300,300-400,400-500mm)

INSIDE & OUTSIDE CALIPER SET (4",6",8",12")

DEPTH GAUGE (0-25,0-50 mm)

DIAL GAUGE WITH MAGNETIC STAND (ADJUSTABLE & FIXED)

CLAMPMETER 1000 A AC/DC

MULTIMETER 1000 V AC/DC, 10A

Providing and fixing in position approved quality white glazed earthenware flat back lipped front urinal 265 x 315 x 440mm or nearest size having a 15mm PVC connection, 32mm or nearest dia PVC waste connection and 1 no CP spreader connected to waterline and 15mm brass push cock, cutting and making good the walls and floors, including cost and conveyance of all materials, screws, plugs, labour, other incidentals, etc. complete. All PVC items are to be heavy duty type.

Supplying and fixing 690 x 165 x 325mm size or nearest size porcelain urinal division plate of approved quality and colour as directed by the Engineer-in-charge.

Providing and fixing in position powder coated aluminium double leaf door with outer frames of size 63.5mm x 38.1mm x 2mm or nearest available size all round, vertical styles & top horizontal member of size 50mm x 45mm x 2mm, bottom horizontal member of size 100mm x 45mm x 2mm of superior quality powder coated aluminium sections panelled with 5mm thick plain glass fixed with EPDM beading between panel and aluminium frame on all faces and glass fixed at a height of 1m from the top. Bottom half with 8mm thick particle board of height 1.2m from bottom frame including cost and labour charges for all materials and fixing etc., complete. The door is to be provided with 1no. door lock,1 no tower bolt, 4 nos anodized aluminium handles 150mm or nearest size one on each face of door shutter, 2 nos of door closer of approved make.

Providing and fixing in position powder coated aluminium single leaf door with outer frames vertical styles & top horizontal member of size 50mm x 45mm x 2mm, bottom horizontal member of size 100mm x 45mm x 2mm of superior quality powder coated aluminium sections panelled with 5mm thick plain glass fixed with EPDM beading between panel and aluminium frame on all faces and glass fixed at a height of 1m from the top. Bottom half with 8mm thick particle board of height 1.2m from bottom frame including cost and labour charges for all materials and fixing etc., complete. The door is to be provided with 1no. door lock, 2 nos anodized aluminium handles 150mm or nearest size one on each face of door shutter, 1no of door closer of approved make.

GRID CEILING Providing & Installing to true line and level commercial type Suspended Modular Ceiling suspended using suitable support system at every 1200mm intervals. General Requisites; Grids width: 24 mm finished in approved shade (white). The main runners & cross Tees to have "stab" installation system made of corrosion protected galvanized steel or approved equivalent. Tile Specification Tile type: Calcium Silicate ceiling Tile Size 600 x 600 x 15 mm thk. Edge detail: Tegular Ceiling Suspension System Grid Member Sizes. Main Runners: 24 x 32 x 0.30 mm or nearest available size Cross Tees: 24 x 24 x 0.30 mm or nearest available size Perimeter Section: 24 x 27 x 0.40 mm or nearest available size. False Ceiling will be measured on horizontal Plane only. Horizontal Plane measurements are to be inclusive of vertical drops, edge mouldings, fascias etc. All extra tiles occupied by lights and diffusers to be returned to department Rate quoted to include all cut outs required for light fixtures.

Supplying and fixing the following water supply fittings approved by the Engineer-in-charge, including cost and conveyance of all materials, all labour for fitting, all other incidental charges etc. complete for all levels.

15/20 mm dia angle cock

SS gratings - 125/150mm size

Brass ball valves 25 mm

Supplying, fixing, laying and jointing the following dia PVC pipes with pasted type joints of approved quality using solvent cement including all cost and conveyance of all materials, sundries etc. complete. The rate shall be inclusive of supplying and fixing necessary specials etc. as per the direction of the Engineer-in-charge.

25mm dia

110mm pasted PVC pipe(4kgf)

50mm dia (10kg/cm2)

Supplying and fixing ISI marked / best quality approved brand 110 mm PVC specials at all heights including cost and conveyance, all labour and all other incidentals etc. complete all as directed by the Engineer-in-charge.

Tees, door tees, bends etc.

Adapters, reducers, offsets, vent cowl etc.

Providing and fixing 600 x 450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard card ground fixed to wooden cleats with CP brass screws and washers complete.

Supplying and fixing PVC multi floor traps with 110mm dia including cost and conveyance of all materials, labour, other incidentals etc. complete.

Providing and fixing 15mm nominal bore CP brass long body bib cock with wall flange of approved quality and make.

Supplying and fixing PVC line traps including cost and conveyance of all materials, labour, other incidentals etc. complete.

Providing and fixing in position louver type ventilator using powder coated Aluminium frames of approved quality and shade using 48x38x1.5mm size or nearest available sections, louvers made with 4mm thick glass, screws, nails etc. including cost and conveyance of all materials, all labour etc. complete as directed by the Engineer in charge.

Providing and fixing in position fully glazed aluminium super sliding window/ventilator with lock system, powder coated aluminium heavy section with sliding shutters using following sizes or nearest available size 63.5 x 31.75 x 2mm for frames, 38.10 x19.5 x 2mm for shutter interlock, vertical and horizontal and plain glass 4mm thick including all fixtures like hinges, locking arrangements, handles, EPDM beadings etc including cost and conveyance of all materials, labour, other incidentals etc. complete.

Provinding and fixing electrification work inside material&HR office , toilet and bathrooms including all lights,switch boards,exhaust fans,AC etc list and work is attached.

SHMSHIPCARE

ABS MARINE ENGINEERING LLP

GS ENTERPRISES