Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.9 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹26.4 L+₹2.5 L (10.6%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹27.4 L+₹3.5 L (14.5%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 | |
| 4 | L4₹27.9 L+₹4.0 L (16.8%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 | |
| 5 | L5₹28.1 L+₹4.2 L (17.4%)Rejected-Finance 179 URBAN ESTATE RAM TIRATH ROAD NR GURUDAWARA DARSHAN SINGH AMRITSAR PUNJAB 143001 | AMRITSAR | PUNJAB | 143001 | L5 | Rejected-Finance Being other than L1 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
14 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NAMS
GE NAMS AMRITSAR
CERTAIN REPAIR TO MES INSTALLATION UNDER 54 BDE AREA AT NAMS
2022_MES_558324_1
GE NAMS-71/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE NAMS
CLASS D CATEGORY a(i)
8 documents required · 8 mandatory
₹500
GE NAMS
₹60,000
Yes
2 Jan 2023
17 Oct 2022
16 Nov 2022
17 Oct 2022
14 Nov 2022
31 Oct 2022
Amount
Dismantling old posts or struts ( wood, steel or RCC) any section embeded below ground level with cement concrete, including taking out embedded portion comple all as specified and directed
Excavation in post holes (or similar holes) each not exc 0.5 cum, getting out, in soft/loose soil including returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed.
M&L for plain cement concrete (1:3:6) type B2, using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
Dismantling of chain link fencing, wire mesh of any type, and in any position by unscrewing nuts, fillets, clamps or cutting of rivets, and welded portion complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified and directed. Note: supply only chain link fencing, MS 10mm dia round bars as line wire and MS flat iron shall be measured and paid separately under respective item of this schedule.
Supply only Chain link MS galvanised fencing any size and shape (Approved by GE/EIC) any mesh, size and type to any of standards , rails , staining bolts, etc complete all as specified and directed.
S&F, galvanised, 2 strand, steel barbed wire, 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of strandard rails straining bolts, including securing and tying at crossing with and provisioning of galvanised mild steel wire, staples or steel pins incl dismantling of old existing barbed wire in any position complete all as specified and directed. Note: Each line wire shall be measured for payment
Description all as per above item Sl No 7.00 here-in –before but except barbed wire.
S&F, mild steel posts and struts in fencing cutting top to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for securing wire mess etc.) including all necessary drilling, bolting or reveting etc. and similar work conforming to Fe-290 (Gde E-165) complete all as specified and directed.
Description all as per above item Sl No 9.00 here-in –before but except mild steel
S/F in repair framed work such as grills, grating etc with end of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, wlk ways, raailing, framed ork of water tanks and similar work confirming to FE 290 Gde E-165 complete all as specified
Supply only mild steel flat iron, round bars etc complete conforming to Fe-290 (Gde E-165) complete all as specified and directed. Note:- 10mm dia MS rods 3 Nos shall be provided horizontally by interwewaving in the chain link and welded with MS flat iron.
S&F mild steel screw bolts 5 to 10mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc. 5cm long complete all as specified and directed.
M & L for brick work with sub class 'B' bricks in CM (1:6) straight or curved on plan exc 6 mtrs mean radius, including dismantling of old bricks complete all as specified and directed.
Description all as per above item Sl No 14.00 but except bricks complete all as specified and directed.
M&L cement plaster 15mm thick in CM 1:4 on Brick wall etc finished even and fair without using extra cement on External Wall all as specified.
M&L prepartion of new plastered surfaces of walls and applying two coat of Cement Based Paint over one coat of alkali resistant primer complete all as specified and directed.
Taking down cement plaster on brick walls incl racking out joints etc,hacking for key, scrubing down with water etc & dispose off debris upto a distance exc. 500 mtrs but n.exc 1.5 Km where directed complete all as specified.
M&L cement plaster 15mm thick in CM 1:6 on Brick wall etc finished even and smooth without using extra cement (Internal wall) all as specified.
M&L cement plaster 10mm thick in CM 1:3 on concrete surface as on ceilling finished even and smooth with out using extra cement all as specified.
M&L for preparation of new plastered surfaces of walls, pillars cornices etc and applying two coat of Oil Bound Distemper over a one coat of primer complete all as specified and directed.
M & L three coat of white wash incl preparation of new plaster surface of ceiling complete all as specified and directed.
M&L prepartion of Old plastered surfaces of walls and applying one coat of Cement Based Paint complete all as specified and directed.
M&L for preparation of Old plastered surfaces of walls, pillars cornices etc and applying one coat of Oil Bound Distemper complete all as specified and directed.
M & L one coat of white wash incl preparation of Old plaster surface of ceiling complete all as specified and directed.
S&F machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 25mm thick sand cushioning and joint filled with dry sand, incl dismantling of stone slab and tiles of any description of thickness in floors/aprons etc complete all as specified and directed.
Description all as per above item Sl No 26.00 here in before but except paver block shall be reused after necessary cleaning and making good all as specified.
M & L machine pressed coloured chequered tiles of size 300 x 300 x 25 mm thick laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry incl dismantling / demolition and removing rubbish off the primises etc complete all as specified and directed.
M&L 75mm thick Cement concrete in foundations, filling and mass concrete, Type D2 1:4:8 (using 40 mm graded stone aggregate) incl necessary form work, Including demolition of old cement concrete in any description complete all as spd and directed.
M & L for PCC 1:2:4 Type B-2 (using 20mm graded stone aggregate) as in flooring incl finishing the cement concrete surface even and smooth with using extra cement, rubbish off the primises and incl demolition complete all as specified & directed .
M&L for Hard core of (Broken bricks) of guage n.exc 63mm deposited spread and levelled in layer n.exc 15cm thick watered and rolled/ rammed to a true surface complete all as specified and directed.
S & F steel work in tubular trusses and tubular posts, vertical/horizontal bar, chin up bar and similar works including special shaped washers, chequered plate etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 including dismantling of old mild steel of any description complete all as specified and directed.
S&F for Pre- painted galvaume aluminum zinc coating GI based manglore/trapezoidal/semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding, fixed with self tapping screws as incl dismantling of plain or corrugated steel sheeting in roof covering all as specified and directed by EIC.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ ridge hipe valley to wall, fixed with self tapping screws as specified
M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
Material and labour for preparation of old steel surfaces of exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for 35 mm thick precast cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in louvers or jallies (measured solid), including all mouldings but excluding frame, set in cement mortar (1:4) including taking down old Jallies complete all as specified and directed.
M&L, in repair for precast RCC pillar in 1:2:4 type B0 (using 12.5mm graded aggregate) decorative type of size (100mmx100mm & 750mm high for RCC jalli incl fixing in conc etc incl dismantling existing pillar complete all as specified and directed.
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing (Fe 410-W(Gde E- 250) qualityA including dismantling of old iron gate or other section complete all as specified and directed.
Taking down steel gate exc 6 Sqm but n.exc 12 Sqm any weight and refixing in the same opening on bearing after repairing , painting of gate and making good distrurbed portion complete all as specified
M&L for Granite 15-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin platform, treads, risers and like laid in cement 15 mm thick cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl rounding of edging and rubbish off the primises etc complete all as specified and directed.
Material & labour for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (a) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (b) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf
(c) MS Tower bolt 150mm long - 2 No per leaf (d) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (e) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (f) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf (g) 12 mm square guard bar, 10 cm centre to centre. (h) 25x4 mm flat iron all around for joint of both frame. (j) One coat of Red oxide primer to MS window and guard bar. Note : Including taking down old steel / wooden window and making good dismantled portion with PCC 1:2:4 type B0 including hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge.
Roop Sons and Co
M/s MAHAJAN CONSTRUCTION CO.
Mahajan Builder
M/S MAHAJAN CONSTRUCTION CO
BISHAN DASS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .