CERTAIN REPAIR/ MAINTENANCE OF MD ACCN IN A-3 AREA AND REPAIRS TO COMPOUND WALL, DRAINS, FENCING AND HARDSTANDING IN A-2 AND A-3 AREA OF AGE B/R-I UNDER GE (WEST) JALANDHAR CANTT

Amount

Demolition of cement concrete in ground floors and pavings not exc 15 cm thick below or above ground level complete all as specified and directed.

Material and labour for 40mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate), as in leveling concrete in floor finished concrete surface even & smooth without using extra cement complete all as specified and directed.

Material and labour for 75 mm thick PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in plinth protection, laid in panels, concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

Material and labour for 100mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate), as in sub floors, sub base; concrete surfaces finished even & fair to receive topping floor finish/layer all as specified and directed.

Material and labour for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate), as in foundation filling etc all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store complete all as specified and directed.

Material and labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.

Material and labour for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc 0.06 Sqm but not exceeding 0.11 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

Material and labour for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

Material and labour for Non skid ceramic coloured tiles, 7-8mm thick (Square/rectangular), area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm; as in dado/skirting etc, set and jointed in neat cement slurry and pointing in white or coloured cement to match the surface over and including 10mm thick backing layer of cement mortar (1:4) complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles, size 300mm x 200mm x 6-7mm thick as on vertical surfaces such as dado/skirting etc set and jointed in neat cement slurry and pointing in white cement with pigment to match the surface over and including 10 mm thick rendering or backing layer of cement mortar (1:4) complete all as specified and as directed.

Material and labour for chequered cement concrete coloured tiles 30cm x 30cm x 25mm thick, with grey cement and pigment, jointed and pointed in neat cement slurry in floor laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and labour for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

Material and labour for 60mm thick machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-35 grade, with grey cement and pigment, laid in floor/ path/ hardstandings in any pattern as approved, laid over sand cushion and interstices filled with sand using plate vibrator complete all as specified and directed. Note: Sand for sand cushioning shall be measured and paid for separately.

Material and labour for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all specified and as directed.

Demolition of brick work or stone/ boulder masonary built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks, straight or corvered on plan exc. 6.0m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks, straight or corvered on plan exc. 6.0m mean radius built in cement mortar 1:6 but except brick complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks, old size, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4) complete all as specified and directed.

Taking down cement plaster of any description on brick or stone masonary, including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified & directed. Note-The quoted rate should including scaffolding and other necessary arrangements upto height upto 9.0 mtr.

Material and labour for 15mm thick rendering in cement mortar 1:4 on brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and as directed. Note-The quoted rate should including scaffolding and other necessary arrangements upto height upto 9.0 mtr.

Material and labour for 15mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and as directed. Note-The quoted rate should including scaffolding and other necessary arrangements upto height upto 9.0 mtr.

Material and labour for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of chalk whiting primer complete all as specified and as directed by Engr-in-Charge.

Material and labour for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Material and labour for preparation of newly plastered surface or unplastered surface of walls and applying two coats of exterior emulsion paint over wall primer as per manufacturer's instructions complete all as specified and as directed.

Material and labour for preparation of new plastered surface of walls and applying three coats of white washing complete all as specified and directed.

Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters (Without taking off shutters from the frames complete all as specified and directed.

Taking down Chowkhat or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutters (Without taking off shutters from the frames complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and directed.

Supply and fixing for 165 x 60 mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specified and directed.

Material and labour for PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in filling hollow pressed steel door frame, hold fasts and similar articles complete all as specified and directed.

Material and labour for cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc. half brick but not exc. one brick complete all as specified and directed.

Material and labour for 35mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and as directed.

Material and labour for 2nd class hard wood glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.

Supply and fixing in repair 19mm thick factory made flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and as directed.

Supply and fixing of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

Supply & fixing of Factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.

Supply and fixing galvanized mild steel wire cloth 0.56mm nominal dia and average width of aperture 1.18mm and fixed with tinned tacks or galvanised steel staples complete all as specified and as directed.

Supply and fixing in repairs galvanized mild steel wire cloth 0.56mm nominal dia and average width of aperture 1.18mm and fixed with tinned tacks or galvanised steel staples complete all as specified and as directed.

Supply and fixing sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane, including hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads complete all as specified and directed.

Supply and fixing 200mm long aluminium anodised barrel tower bolt, of extruded section, with bright bolt and fixed complete all as specified.

Supply and fixing 300mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed.

Supply and fixing aluminium handle cast type anodised 150mm long complete all as specified and directed.

Supply and fixing butt hinges, 100mm long, medium weight, cold rolled mild steel complete all as specified and as directed.

Supply and fixing butt hinges, 75mm long, medium weight, cold rolled mild steel complete all as specified and as directed.

Material and labour Hasp and staple, safety type aluminium anodised 125mm size with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fixing mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Supply and fixing mild steel epoxy powder coated pelmet rods including 02 Nos of brackets complete all as specified and and directed.

Supply and fixing mild steel framed work for such as guard bars/ grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door, railings and similar work complete conforming to Fe-290 Gde E 165 including one shop coat of zinc chromate primer including taking down guard bars/ grills, gratings complete all as specified and directed.

Material and labour for preparation of new or previously untreated wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

Material and labour for preparation of new or previously untreated steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down existing water proofing from roof slab and cleaning the roof slab including scrapping of existing loose concrete from roof top and washing with water complete all as specified and directed.

Material and labour for 40 mm thick plain cement concrete 1:2:4 type B-1 as roof padding concrete to bring the existing slab in slope of 1:40 complete all as specified and as directed.

Material and labour for 12mm thick rendering on top of roof slab in cement mortar 1:4 by using water proofing compound @3% by the weight of cement, finishing the surface even and fair without using extra cement complete all as specified and directed.

Material and labour for plain cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete as in sunken floor complete all as specified and directed.

Material and labour 15mm thick rendering in cement plaster on brick or concrete surfaces in cement mortar (1:3) with integral water proofing compound @ 3% by weight of cement in top 5mm thick finishing the surfaces with even and smooth with using extra cement complete all as specified and directed. (WPC shall be measured and paid seperately).

Supply only integral water proofing compound complete all as specified and directed.

Material and labour for applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 Kg per Sqm over applying primer bitumen coat @0.30 kg per sqm including cleaning surfaces complete all as specified and directed.

Fixing only 500 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) including dismantling the existing tank and cleaning and removing all scale and dirt etc from tanks and mouths of circulating pipes etc complete all as specified and as directed.

Supply and fixing in repair Orissa pattern squatting pan with integral foot rest, vitreous china white of size 580mm x 440mm including making connection to trap, flush pipe, antisyphonic pipe (but excluding flushing pipe and flushing cistern), provision of lime concrete bedding etc and making good the floor surface complete all as specified and directed.

Supply and fixing vitreous china wash hand basin white flat back, size 550mm x 400mm, on and including cast iron cantilever brackets, cutting for and pinning in ends of brackets including waste pipe 32mm dia PVC, waste chain and plug and porcelain stopper, fixing of pillar tap, brass coupling 32mm bore chromium plated, restoring all connections complete all as specified and as directed.

Supply and fixing in repair 10 litres capacity PVC valveless syphonic action type, low level flushing cistern ISI Marked white with inlet, ball valve, float and handle including brackets fixed complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Supply, laying, jointing and testing 15mm bore galvanized iron steel tubing medium grade with all fittings such as bends, elbows, sockets, tees, reducers etc, fixed to walls, ceiling or laid in floors, including cutting through wall complete all as specified and as directed.

Supply, laying, jointing and testing 20mm bore galvanized iron steel tubing medium grade with all fittings such as bends, elbows, sockets, tees, reducers etc, fixed to walls, ceiling or laid in floors, including cutting through wall complete all as specified and as directed.

Supply and fixing in repairs for 15mm dia of pipe bib taps, cast copper alloy fancy type and chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fixing in repair 15mm bore stop valve cast fancy type copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and as directed.

Supply and fixing in repair 15mm bore angle valve cast fancy type copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and as directed.

Supply and fixing in repair 15mm bore fancy type stop valve/angle cock cast copper alloy chromium plated with long shank (Concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and as directed.

Supply and fixing in repair fancy type pillar tap, cast copper alloy chromium plated, with capston heads, 15mm bore dia of pipe screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

Supply and fixing in repair 450mm long PVC connection fiber reinforced, for Hot or Cold water 15mm size with PTMT nuts and washer on both ends complete all as specified and as directed.

Supply and fixing in repairs 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified and directed.

Supply and fixing in repairs Chromium plated grating 125mm dia circular of approved make and fixing with cement mortor 1:3 on Nahani trap or floor trap complete all as specified and directed.

Supply and fixing in repairs tubular towel rail brass chromium plated 20mm dia, D type 60cm long fixed with two plugs complete all as specified and directed.

Supply & fixing in repairs brass chromium plated health faucet for pedestal pattern water closet including PVC flexible pipe alongwith complete necessary fittings all as specified and directed by the Engr- in- Charge.

Supply and fixing in repair stainless steel plate rack of superior quality of size 31" x 30" weight not less than 8 Kg complete all as specified and directed.

Supply and fixing for rotational moulded polye- thylene water storage tanks, 500 litres capacity, (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position including 20mm PTMT float valve all as specified in SSR Part I, including dismantling of water tanks complete all as specified and directed.

Dismantling of 100/75mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out from floors or walls complete all as specified and as directed.

Supply and fixing 75 mm bore sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors or fixed in walls complete all as specifid and as directed.

Supply and fixing 100 mm bore sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors or fixed in walls complete all as specifid and as directed.

Supply and fixing cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate) diameter of outlet 75mm complete all as specified and as directed.

Material and labour for preparation of old decorated surface of walls and applying one coat of oil bound distemper complete all as specified and as directed by Engr-in-Charge.

Material and labour for preparation of old decorated surface of walls and applying one coat of cement base paint complete all as specified and as directed by Engr-in-Charge.

Material and labour for preparation of old decorated surface of walls and applying one coat of exterior emulsion paint complete all as specified and as directed by Engr-in-Charge. Note-The quoted rate should including scaffolding and other necessary arrangements upto height upto 9.0 mtr.

Material and labour for preparation of old painted wooden surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old painted steel surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling of fencing wire mesh, any type and size complete all as specified and directed.

Dismantling of fencing posts/ struts of any description (wood, steel or RCC) embedded in concrete, brick work, masonry etc. including taking out embedded portion and making good to disturbed surface complete all as specified and directed.

Demolition of Concrete concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour for providing PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in blocks, bends, roof curves, mud stopes, sunken floor rounded, coping, benching of manholes, drains, laid to shape and slope etc, haunching, slightly rounded or chamfered angle and throating etc including all necessary form work complete all as specified and directed.

Supply and fixing mild steel galvanised 2strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. fixed in repairs complete all as specified and as directed. (each line of wire to be measured)

Excavation in post holes (or similar holes) in soft/loose soil each n. exc. 0.5Cum, getting out, returning, filling in, and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to adistance n. exc. 50m and making good the disturbed surface complete all as specified and as directed.

Material and labour for cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation filling, fencing post, columns etc, complete all as specified and as directed.

Supply and fixing mild steel framed work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-W (Gde- E- 250) quality complete all as specified and as directed.

Material and labour for providing 25mm thick (measured solid) precast cement concrete louvres and jallies in PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregates) including all mouldings set in cement mortar (1:4), fixed in repairs complete all as specified and directed .

Add to (or deduct from) above item no 97 for each 10mm thickness or part thereof over, 25mm thick complete all as specified and as directed.

M/s Bharat Enterprises

KABEER CONSTRUCTIONS

KARTIK BUILDERS

M/S Kuldip Construction Co.

G S TRADERS

PAUL CONSTRUCTION CO.

M/s Nirmal Singh and Co.

M/S Vinod Kumar

AAY KAY ENGINEERS

JAGDISH KUMAR SEHGAL