Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.7 LAccepted-Finance | L1 | Accepted-Finance BOQ Rate accepted | |
| 2 | L2₹9.3 L+₹59,058.60 (6.77%)Accepted-Finance | L2 | Accepted-Finance BOQ Rate accepted |
Tender Value
Refer Docs
EMD Value
₹10,500
Closing Date
24 Jul 2023, 2:00 pmClosed
SE Civil TTPS TTN 4
Office of the SE Civil TTPS TTN 4
Raising the floor and providing culvert in front of C and D Stores and minor repair works at Central Stores
2023_EB_336844_1
Spec.No.SE CIVIL TTPS 132 2023 2024
Open Tender
Civil Works - Others
Item Rate
120 days
Tuticorin Thermal Power Station
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹10,500
Yes
26 Jul 2023
6 Jul 2023
25 Jul 2023
6 Jul 2023
24 Jul 2023
6 Jul 2023
Amount
Earth work excavation in all soils such as sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soil and depositing on bank with an initial lead of 10m and initial lift of 2m including cost of all materials, labours, lead, lift, etc. complete.
Providing Quarry Rubbish including cost of all materials, labour, lead, lift, hand packing consolidation by watering with plastic state etc., complete.
Providing PCC 1:2:4 using OP cement with 12mm to 20mm machine crushed HBG metal including cost of all materials, labours, lead, lift, curing, etc. complete.
Dismantling the existing RCC for the required width & depth as per the instructions of engineer in charge including cost of all materials, labours, lead, lift, curing, etc. complete.
Providing centering and shuttering using steel structures & props 10 to 13 cm dia including cost of all materials, labours, lead, lift, etc. complete.
Providing R.C.C 1:1½:3 using O.P Cement with 12-20mm machine crushed HBG metal including cost of all materials, labour, T and P, leads, lifts, curing, etc., complete but including cost of reinforcement and form work etc., complete.
Supplying fabrication and fixing in position of RTS rod for reinforcement including cutting bending tying and fixing in position including cost of all materials, labour, binding wire lead, lift, etc., complete.
Plastering with C.M 1:3, 12mm thick including cost of all materials, labours, lead, lift, curing, etc. complete.
Brick work in CM 1:5 using class II bricks including cost of all materials, labours, lead, lift, curing, etc. complete.
Clean removal of cement plaster from wall surface including cost of all materials, labours, lead, lift, curing, etc. complete.
Plastering with CM 1:5, 12mm thick including cost of all materials, lead, lift scaffolding, curing, white washing etc., complete.
Providing two coats of Acrylic distemper of approved quality, brand & colour in new inner surfaces over a coat of primer including cost of all materials, scaffolding charges, labours, lead, lift, curing, etc. complete.
Providing two coats with ready mixed plastic emulsion (exterior walls) of first class quality paint & approved colour over a priming coat including cost of all materials, scaffolding charges, thorough cleaning of surface, labours, lead, lift, curing, etc. complete.
Dismantling the existing pressed tiles including cost of all materials, labours, lead, lift, curing, etc. complete.
Terrace flooring with one course of pressed tiles 200 x 200 x 20mm over CM 1:3, 20mm thick mixed with crude oil 10% by weight of cement and pointing with the same oiled mortar with required slope over RCC roof slab including cost of all materials, labours, lead, lift, curing, etc. complete.
Painting of two coats with ready mixed enamel paint with primer for the old steel surface including cost of all materials, scaffolding charges, labours, lead, lift, curing, etc., complete.
Repairing and overhauling and cutting the leaves & side channels of the rolling shutters by dismantling the springs, clamps etc., and removing the bends and reshaping the plates, repairing the shutter and guide channel both sides including straightening, applying new grease completely, cleaning all bolts and nuts using diesel and providing bolts & nuts and screws etc., wherever required for easy operation rate including cost of all materials, scaffolding, labour, lead, lift, etc., complete.
Dismantling and fixing of steel door & hinges after cutting including cutting, labour, lead, lift, etc., complete.
Providing PCC 1:2:4 using OP/PP cement with 6mm machine crushed HBG metal including cost of all materials, labours, lead, lift, curing, etc. complete.
Plastering with C.M 1:3, 20 mm thick including cost of all materials, labours, lead, lift, curing, etc. complete.
S. THIRUMAL
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .