ADDN ALTN AND IMPROVEMENTS TO ENTRANCE FOYER OF BLDG NO P-131 NBCD SCHOOL AND SPECIAL REPAIRS TO FALSE CEILING PANELLING OF MAIN ADMIN BLDG P-163 AND BLDG NO P-218 DAYASHANKAR BLOCK AT INS SHIVAJI LONAVLA

Amount

Excavation in trenches n.exc 1.5m wide, & n exc 1.5m deep and getting out in hard/dense soil.

Returning filling in, including, spreading levelling watering and well ramming in layers not exc 25cm in soft/loose soil etc complete.

Removing excavated material exc 100 m but n.exc 250 m and depositing where directed as in soils.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation and mass concrete.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

M & L for RCC M30 (Design mix) for foundation beams, plinth beams, bases for columns etc basement slabs, under reamed piles and mass concrete.

M & L for RCC M30 (Design mix) for columns, pillars, piers, posts etc.

Formwork to sides of pillars, posts, struts, piers, columns, and stanchions

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M&L for RCC M30 (Design Mix) for floor/roof beam supported on walls, beams and lintel above 1.5 m clear span complete all as specified

M&L for RCC M30 (Design Mix) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping)

M &L for RCC M 30 (Design mix)chajjas, and the like

Formwork to chullah hoods, chajjas, troughs and similar items including edges

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips on slab, MH cover etc. complete all as specified and directed by Engineer-in-charge.

All as per item above but bars of 8 mm dia

M&L for powdwer coated aluminium three track, three shutter (of equal width) sliding type window without sash bar including necessary jointing clip, rubber packing, neoprene rubber gasket, locking arrangement (star lock) bearing (two no's for each sliding shutter ) &4 mm thick plain glass for glazing with for two shutters and aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire stapless complete all as specified and directed for one shutter & including following powder coated section as given in 'JINDAL' catalouge complete all as specified and as directed (i) Frame (Bottom) -20620, (ii) Frame top & Side - 20621, (iii) Shutter Vertical (Handle Lock) - 20846, (iv) Shutter Vertical -(int lock) - 20845, (v) Shutter (Top) - 20844, (shutter Bottom) - 20847

M&L Brick work with sub-class `B' bricks, straight or curved on plan exc 6m mean radius built in cm 1:6

Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6

Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces.

Rendering to celing concrete surfaces in CM 1:3(5mm) thickness

Supply for material for Integral waterproofing compound for external plaster

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 25 cm thick, spread, levelled and rammed including watering

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L for 75 mm thick PCC (1:3:6) type C 2 (usin 40 mm gradded stone aggregate) as in sub base of flooring etc

M&L coloured /light shade vitrified ceramic tiles 10mm thick (square/regtangular) polished , area of each tiles not exc 0.36 sqm in floors etc and joineted neat in cement slurry and pointed in white or colour cement to match over 15 mm thick screed bed in CM 1:6

Ditto all as item No 28 above but as in skirting to match floor finish with 15 mm thick backing coat of cement plaster in CM (1:4)

M&L for Preparing newely plastered surface and primng with alkali resistant priming paint and applying 2 coats of oil bound distemper white or tinted on walls over 3 mm thk wall care putty

M & L for Preparation of newly plastered surfaces of wall and applying two coats of Anti fungal paint (Apex or Equivalent) over coat of acrylic primer on external walls of Bldg of height upto 15 m above GL including scaffolding all as specified.

Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete

S&F 12 mm thick toughened glass doors of any size and design with suitable stainless steel patch fittings, locking arrangement , floor springs and 02 nos 300 mm long matt finish handles includng necessary acid wash/itching complete all as specified and as directed.

M&L for granite(of any type) work(table rubbed and polished) cooking platform and like set in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to matach with shade of granite thickness of granite 18 to 20mm

Taking down existing steel/Aluminium ventilator/window and door of any size or an description.

Dismantling Asbestos cement (corrugated ted, semi corrugated, etc.) sheets in roof coverings

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Demolition of Concrete (reinforced)of any description and in any position not otherwise specifically provided for

Demolition of Brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles

M&L for reinforced cement concrete (Nominal Mix), M-20 grade (using 20mm graded stone aggregates) for floor/roof beams and lintels above 1.5m clear span complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 on other than fair faces of brickwork or stone masonry surfaces finished even & smooth (without using extra lime or cement) complete all as specified and as directed.

Cutting openings through cement mortor walls of any size for door, window and other openings or enlarging existing openings, etc., or cutting out defective masonry for underpinning including providing, fixing and removing, shoring, cleaning and stacking stone and removing surplus to store and rubbish off the premises complete all as specified and as directed.

M&L second class hard wood for plain solid, straight chowkats and frame rebated on the solid, rounded or chamfered put together with glue pinned at joints all as directed.

M&L for flush shutters 35mm thick with soild core construction with block board core and ply wood face panes with commenced type on one side and decorative face veneer with one side including lipping/pram to match all as directed by Engr-in-Charge .

S&F 150 mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed.

S&F 300 mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed.

S&F extruded brass handles, fabricated type, anodized of size 150 mm.

S&F stainless steel butt hinges of size 100mm with stainless steel screws

Dismantling Wall and ceiling boards of any type or insulation boards/slabs/blankets, any thickness, including cover fillets

S&F framework of aluminium box pipe of size 70 x 40 mm made out of 16 gauge aluminium sheet projected not exceeding 50 cm away from wall columns/corners/turnings and spacing not exceeding 90 cm c/c (both ways) etc complete all as specified and as directed.

S&F coloured aluminium composite panel, 4mm thick, fixed on projected frame work , joints sealed with and including silicon sealing agent etc complete all as specified and as directed. Notes for Item Nos :- (i) Make of aluminium composite panels- Cat No A-45 with colour shade AP-02 (Metalic silver) manufactured by Alupan plus or equivalent cat manufactured by "Eurobond/National bond". (ii) The tenderer is required to visit the site and makes himself thoroughly aquainted with the type of bldg and other relevant conditions where the work of panelling is to be executed. He is required to make himself fully familier with the nature of bldg and scope before tendering. For the purpose of inspection the contractor is required to contact the Assistant Garrison Engineer B/R-I who will provide the reasonable facilities as required by the tenderer. The tenderer is deemed to have visited the site before submitting the tender whether he does it or not and no claim of what so ever nature shall be entertained at later date. (iii) The grid work and panelling works as required shall be executed all as specified above and as per manufacturers instructions of the makes specified in the description of the item. The decision of the Garrison Engineer in this regard shall be final and binding. (iv) Makes of various materials required for above items shall be as under :- (a) Aluminium section- Jindal/Indal/Hindal Co. (b) Sealing agent - GE/Wacker/Dow Corning.

Dismantling of single layer Manglore pattern or similar tiles in roofing.

Dismantling battens for tiles,shingles etc,of any size including tilting fillets.

M&L ridge or hip tiles to suit mangalore pattern roofing tiles bedded and jointed in CM 1:6 using class AA Tiles.

M&L for fixing roof tiles Manglore pattern,interlocking at side joints,laid dry.

S&F MS tubular section of size 50x25x2.0 mm thick for rafters and 25x25x2 mm thick for batten fixed over galvalume sheet including Mild steel screw bolts & welding for supporting manglore pattern roof tile complete as directed by Engr-in-charge

S&F 0.63 mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed)with grade of zinc coating 275 L-type or J-type or cranked hook bolts in lieu of screws for ridges

M&L for Screwing eaves tiles (each tile screwed) to eaves battens with galvanised iron screws, GI and bitumen washers including drilling holes in tiles

M&L for powder coated aluminium snap grid frame work for false ceiling, with aluminium angle 25mmx25mmx1.5mm fixed to perimeter of wall, Main 'T' runner 38mmx25mmx1.5mm and secondary/cross 'T' runner 25mmx25mmx1.5mm to be interlocked in such a way that the size of grid shall be 605mmx 605mm including 6mm dia GI hangers (upto 1200mm length) adjusting level fixed to roof by means of ceiling cleats made out of GI flat 40x3mm, 60mm long and expansion hold fastners 12.5mm dia, 40mm long complete all as specified and as directed. Note:- The thickness of the powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE.

S&F for Plastic Ceiling tiles decorative surface of 595x595x7mm hot transfer printing and good dimensional stability when the temperature is below 45 degree and suitably fixed in false ceiling aluminium snap grid frame with staples or screws complete all as specified and as directed Make :- Adorn or Equivalent

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L rendering in CM (1:4) 15mm thick cement plaster as in backing coat of brick/concrete surface with necessary adhesives finished rough to receive wall claddings/ cladding tiles

M&L for External Wall tiles area of tiles n exc 0.20 Sqm eachj (With a tolerance of +- 4% in thickness) fixed with blended powder polymer modified cement based stone tile adhesives of thickness of approx 3-6 mm thick combed with notched trowel and placed and tapped properly to ensure complete coverage of backside of tiles over adhesives including cleaning/ preparation of newely plastered surfaces to be tiled and making it free from wax, grease, polish,paints etc all as per manufacturers instructions Note :strictly apply the adhesive paste which can be tiled withing 10-15 minutes (Makes: Somany External wall tiles/Johnson tiles. Roff Stone tile adhesives/Dr. Fixit Fevimate TL tile fixing adhesive Note : Item is required to be carried out at height upto 15 m above GL. Rate deemed to include for all necessary scaffolding and protective measures to work at above height

M&L for complete removal of existing treatment of old painted wall surfaces and applying two coats of exterior grade weather resistant, antifungal acrylic paint over one coat of primer on walls complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm but n exc 2 sqm each

Taking down steel/aluminium windows/ventilator /partition of any size with all fittings complete

S&F powder coated aluminium (15 micron anodised) Single leaf door on pivots alongwith hydraulic door closer lock handels & other necessary builders hardware 5mm thick tinted glass fixed with rubber beading in top panel and glazing clips MS clamps and 12 mm thick both side laminated MDF board upto 1.25 m height from bottom with approved aluminium sections as given in JINDAL catelogue @ 1.2Kg/Sqmtr as approved by GE.

S&F aluminum powder coated partitions partly panelled and partly glazed with 12mm thick both side laminated MDF board in bottom panel and 5 mm thick tinted glass in top panel fixed with clips , aluminium beads, rubber gaskets etc centre to centre distance of vertical member shall n.exc 1mtr and horizontal members shall n.exc 1.10 mtr using following aluminum powder coated sections as mentioned in Jindal Catalogue complete all as specified & as directed :- (a) SP – 20048 (b) DP - 20047 (c) Glazing clips - 19352 Note - (i) The thickness of powder coating should not be less than 0.50 micron and tint shall be as decided by GE.

S&F Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats of 2nd class hardwood 30 mm thick

S&F aluminium handles cast type anodised 125mm size.

S&F aluminium anodised barrel tower bolts of extruded section and fixed 150 mm size.

S&F aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of sextruded sections or cast aluminium alloy and fixed 300 mm length.

Preparing new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F in repair 4mm thick Non asbestos fibre cement building fixed or laid/inserted to timber/GI/Aluminium framework with screws

M&L for rendering 15 mm thick in cement mortar 1:4 on stone masonry surfaces and finished even and smooth without using extra cement on walls

Taking down copper/aluminum wiring (light, fan, socket or power) complete and including (fitting and fixture such as switches, socket ,ceiling rose ,pendent ,regulators , etc to be measured separetaly) NOTE:- Job including for taking out old gutties,screw,nails etc and making good to disturbed surface of wall ,floor etc including to match with the existing surface.

M & L for point wiring complete with 1.5 sq mm single core PVC insulated cable 1100 V grade with multistranded copper conductor drawn through PVC casing and capping with all accessories fixed to wall /roofs ceiling etc and incl provision of 1.5 sq mm PVC insulated and unsheathed copper conductor as earth continuity conductor and connected to common earth dolly incl PVC fiber boxes of suitable size for one Fan point controlled by one switch mounting the switches , socket outlets , fan regulators etc all as s specified and directed for following. Note :- PVC fiber Box/ Ms cocealed box with laminated sheet will be fixed on requirment of site.

S & F switch piano flush type single pole one way 5 amp.

S & F ceiling rose three Phase/PVC polycarbonate, isolated body complete all as specified.

Supply & fix fans ceiling complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated

S&F MCB SPN 16-32 A including Sheet Metal enclosure of CRCA sheet with thickness of 3.15 mm for outdoor usage, spray painted and provision for fixing on wall all as specified

M&L for sub main wiing drawing through and including suitable size of PVC Conduit with two runs of single core 1.5 Sqmm and one run of 1.5Sqmm as earth wire of standed copper conductor PVC insulated and unsheathed FRLS cable of 1100 volts grade all as directed.

Supply and fix LED street light 70/75W IP 65.

RK AND SONS CREATION

M/s S.D Construction Co