Providing Raw Water arrangements by pumping for four No WW village Niyana Kharar Alipur Kulana and Mayyar

Amount

Supply & Erection of Horizontal spindle split casing type pumping sets of minimum Four (4) Star rating duties directly coupled to AC squirrel cage induction type motor with 1440 RPM, 3 phase, 50 Hz and accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. A) Raw water pump set 6000 Lpm , 50 mtr head

Supply and fixing following CI D/F pipe and specials/ bell mouth/ including cost of joining materials, laying, jointing, refilling including making adequate support of masonry/concrete for delivery and suction pipe from bell mouth in the collecting tank upto the rising main laid by the Department as per plan shown from the foundatiion wall of pump chamber for all the raw water and clear water pumping sets at water works in position, as per specification given in schedule No.II For Pumping Machinery A) Detail of pipe and specials a) CI D/F bends, Reducers, tees , tappers, tail piece blank flange etc

B) CI D/F pipes ii. 250mm i/d for delivery

iii. 300mm i/d for suction

c) Bell Mouth c) 250mm i/d

Supply, erection, testing and commissioning of Wall mounted electrical panel board , fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900mm having following items : a) For Raw water pump sets for 6000 Lpm x 50 M head = 2 No. a) Main switch 165 Amp 2 No.(L&T, Siemens, ABB) b) Volt meter 100 x 100mm range 0 to 1000 volt 1 No.(AE/KAPPA/L&T) c) Amp meter 100x100mm range 0 to 250 Amp 2 Nos(AE/KAPPA/L&T) d) CT 250/5 3 Nos (AE/KAPPA/L&T) e) VSS 1 No. & ASS 2 No. of approved make f) SPP 2 No. of approved make g) Motor starter, star delta, 2 No. for 6000 LPM x 50 M Head Motor (L&T Siemens, AAB) h) Capacetor of suitable capacity = 2 No i) Indicating Lamp-One set j) Change over switch 165 Amp = 1 No

Supply erection, testing of ISI marked Aluminium wire for 2 Nos motors with under ground system in PVC and flexible pipes copper wire size 2 x 70 sq Sq mm complete in all respects with accessories like thimble etc.

Supply erection, testing of ISI marked Aluminium wire for 1 No panel boards from mainswitch to panel and wiring of panel with size 120 sq mm (Aluminium wire) ISI marked complete in all respects with accessories like thimble etc. complete in all respect

Supply ,erection, testing of light fittings including wire in the Pump Chamber with material upto 10 points including switch, button, plug, PVC conduit pipe & copper wire etc. as per approved specifications complete in respects.

Providing and fixing exhaust fans 18" i/d (450 mm) complete with suitable G.I. sheet of approved make compete in respects.

Providing and fixing ceiling fan 1400 mm (56") with speed adjuster of reputed make compelte ( make Crompton, Usha, Bajaj, Orient) comp-lete in respect

Supply, erection, testing, of reputed make CFL Vapour light 100 watts with fitting and accessories complete in respect

Supply, erection, testing & commissioning of standard make 160 KVA 11/0.433 KVA 3 phase 50 cycle copper wound outdoor type transformer with annual tape charge and termination complete in all respect as per details in DNIT (Kirloskar / ABB/ GE make)

Supply, erection, testing & commissioning of 3 HP electric driven dewatering pumping set capacity 5m3 per hour 15 meter total head with wiring starter, switches and G.I. pipes and specials canvas hose and accessories as per specification in schedule No. II etc. complete in all respects.

Distribution System A) DI Plain Ended Tees, Bends, Reducers etc. for distribution system

Supply, erection, testing and commissioning of 200 KVA Diesel generating set noise control acoustic enclosure radiator cooled 3 phase, 4 wire , 50 cycles 415 + (-) volts AC alternator coupled directly through a set of flexible coup;ong on a common MS fabricated base frame with diesel engine complete as per approved NIT. The rating should be at 1500 RPM a) Diesel Engine c) Alternator c) Base Plate d) Battery 24 V e) 1x120 sq mm 3.0 core XLPE Aluminium = 20 mtr f) Tools AMF Panel a) Motorized change over switch 250 Amp 4 P with fuse base and HRC links 250 Amp b) Under voltage/over voltage relay = 2 No 415 VAC c) Engine starter relay 24 VDC 1 No d) Electronic Timer 24 VDC 1 No. e) Electronic Timer 24 VAC 2 No f) Auxiliary relay 220 VAC 2 No g) Auxiliary relay 220 VAC 3 No h) Metering set 415 VAC 1 set (Amp meter, volt meter, ASS, VSS, Phase indicators, control fuse, frequenecy meter CT's) i) Metering set 24 VDC (Amp motor, volt meter) j) Over load protection for DC 1 No k) Battery charger 24 VDC (Blueron Make) l) Copper bus bar of suitable size m) KWH meter 96 square mm size n) Starting fuse botton and key switch (on/off) o) Engine protection unit with audio visual alarm and shut down for low lubricating oil pressure and high coolent temperature p) Indicating lamp for low lubricating oil pressure high coolant temperature, set running, loan on , DC control on. Note :- Control panel shall have the provision to provide auto manual failure panel (AMFP)

Operatiion & Maintenance of water works (disinfection material supplied by the PHED) as per schedule IV for a period of 5 years ( 60 months) after three months of trial run (will be charged to the A/Mtc.Estimate) i) Operatiion & Maintenance during the defect liability period (Operatiion only)

Ist year Operatiion & Maintenance after defect liability period

2nd year Operatiion & Maintenance

3rd year Operatiion & Maintenance

4th year Operatiion & Maintenance

Bidder Name

Amount

RAM PHAL SINGH CONT

NASEEB SINGH CONTRACTOR

Subham Construction Company

JAI SINGH CONTRACTOR

THE GARHI ADARSH COOP L AND C SOCIETY LIMITED

Subham Construction Company

THE GARHI ADARSH COOP L AND C SOCIETY LIMITED

NASEEB SINGH CONTRACTOR

RAM PHAL SINGH CONT

THE GARHI ADARSH COOP L AND C SOCIETY LIMITED

JAI SINGH CONTRACTOR

NASEEB SINGH CONTRACTOR

RAM PHAL SINGH CONT