Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.6 LAccepted-AOC 184 TENGPUNA PULWAMA PULWAMA PULWAMA JAMMU KASHMIR 192301 UDYAM JK 15 0009999 | PULWAMA | JAMMU AND KASHMIR | 192301 | L1 | Accepted-AOC Being Lq | |
| 2 | L2₹15.6 L+₹62,857.50 (4.20%)Rejected-Finance KOIL KOIL PULWAMA PULWAMA JAMMU KASHMIR 192301 | PULWAMA | JAMMU AND KASHMIR | 192301 | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | L3₹16.0 L+₹1.0 L (6.79%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN L1 | |
| 4 | L4₹16.2 L+₹1.3 L (8.67%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN L1 | |
| 5 | L5₹16.6 L+₹1.6 L (10.8%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN L1 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
14 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) AWANTIPUR
GE (AF) AWANTIPUR, 8 FBSU, AF AWANTIPUR
CERTAIN REPAIRS TO WATER SUPPLY PIPELINES, PUMPING SETS, DG SETS AT WATER SUPPLY INSTALLATION AT GE AF AWANTIPUR
2023_MES_618974_1
GE (AF) AWA-32/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (AF) AWANTIPUR
AS PER NIT AND TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE (AF) AWANTIPUR
₹40,000
Yes
14 Nov 2023
15 Sept 2023
16 Oct 2023
15 Sept 2023
14 Oct 2023
30 Sept 2023
Amount
Taking up U/S CI water main(incl all fitting) with spigot & socket/ MS pipe or any other type of pipe or lead joint incl burning out joint & recovering lead from pipe of 100 mm bore for laying/ rerouting of serviceable pipe after, cleaning, complete all as specified and as directed.
All as per Srl item No.1 above, but 150 mm dia bore, complete all as specified and as directed.
M&L for laying of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes 100 mm with Spigot & Socket end, Class K-7 conforming to IS: 8329/2000 suitable for (push-on) rubber gasket jointing with centrifugally applied inside cement mortar lining with Sulphur Resistant Cement and external Metallic Zinc Coating with a finishing layer of Black Bitumen coating on external surfaces . The standard lengths of the pipes are 5.5 meter (subject to tolerance as per clause 15.5.1 of IS: 8329:2000) with Ethylene Propylene Diene Monomer (EPDM) rubber gasket conforming to IS:5382 of Bulb-Type-2 as per IS:5382; Heel- Type-5, as per IS:5382 will be supplied. Pursuant to clause 15.5.1 of IS8329, 10% of pipes in each size, may be supplied in shorter lengths on surface/ over masonary pillar and connection to old or new position, complete all as specified and as directed. Note: DI fitting /lead joint / Tyton joint will be measured and paid seperately all the dismanted / demolished /taking down material shall be reused or removed from site. Excavation work shall be carried out in civil land necessary permission has to be accorded by contractor. No other payments shall be paid on this account. Work may be carried out on any terrain or inclinations.
M&L for laying of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes 150 mm with welded flanged ends, Class K-7 conforming to IS: 8329/2000 with centrifugally applied inside cement mortar lining with Sulphur Resistant Cement and external Metallic Zinc Coating with a finishing layer of Black Bitumen coating on external surfaces . The standard lengths of the pipes are 5.5 meter (subject to tolerance as per clause 15.5.1 of IS: 8329:2000), with rubber gasket nut bolts washers complete 10% of pipes in each size, may be supplied in shorter lengths on surface/ over masonary pillar and connection to old or new position, complete all as specified and as directed. Note: DI fitting /lead joint / Tyton joint will be measured and paid seperately all the dismanted / demolished /taking down material shall be reused or removed from site. Excavation work shall be carried out in civil land necessary permission has to be accorded by contractor. No other payments shall be paid on this account. Work may be carried out on any terrain or inclinations.
M&L DI bend flanged ends any type radius and angle tapers any type straght bend increacing decreacing or double socket etc) tee pipe single branch y juction double branch cross(all socket and spiogat collars caps and plug for the pipe socket & spiogat of the following size upto 150 mm dia, complete all as specified and as directed. (lead/ gasket for fitting shall be measured and paid separately)
Buring out lead joint in position, including removing old lead of size 100 mm bore, complete all as specified and as directed.
Buring out lead joint in position, including removing old lead of size 150 mm bore, complete all as specified and as directed.
Buring out lead joint in position, including removing old lead of following size 200 mm bore, complete all as specified and as directed.
M&L for run laid laid joint for follwing size of CI pipe of size 100 mm bore, complete all as specified and as directed.
M&L for run laid laid joint for follwing size of CI pipe of size 150 mm bore, complete all as specified and as directed.
M&L for ruber gasket joint/ tyton joint for DI pipe upto size 150 mm bore, complete all as specified and as directed.
Taking down carefully cast iron sluice valve of size 200 mm bore from CI water mains, dismantling parts and reassembling, replacement of ss spindle for sluice valve, class PN 1.0, and repacking stuffing box of sluice valve spindle, refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc., complete all as specified and as directed.
Taking down carefully cast iron sluice valve of size 150 mm bore from CI water mains, dismantling parts and reassembling, replacement of ss spindle for sluice valve, class PN 1.0, and repacking stuffing box of sluice valve spindle, refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc., complete all as specified and as directed.
Taking down carefully cast iron sluice valve of size 100 mm bore from CI water mains, dismantling parts and reassembling, replacement of ss spindle for sluice valve, class PN 1.0, and repacking stuffing box of sluice valve spindle, refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc., complete all as specified and as directed.
Taking down carefully cast iron sluice valve of size 80 mm bore from CI water mains, dismantling parts and reassembling, replacement of ss spindle for sluice valve, class PN 1.0, and repacking stuffing box of sluice valve spindle, refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc., complete all as specified and as directed.
Taking out existing U/S CI sluice valve of any size any pattern up to 200 mm bore from 80 mm bore, complete all as specified and as directed.
S&F Cast iron gate sluice valve of size 100 mm dia Stainless steel stem PN- 1.6 ( Flanged) conforming to IS 14846 hand wheel operated, complete all as specified and as directed.
All as per Srl Item No 17 above but 150 mm dia, complete all as specified and as directed.
Taking up or down GI tubing and connection fixed to wall or laid in trenches of size 15 mm dia, complete all as specified and as directed.
Taking up or down GI tubing and connection fixed to wall or laid in trenches of size 20 mm dia, complete all as specified and as directed.
Taking up or down GI tubing and connection fixed to wall or laid in trenches of size 25 mm dia, complete all as specified and as directed.
Taking up or down GI tubing and connection fixed to wall or laid in trenches of size 40 mm dia, complete all as specified and as directed.
Taking up or down GI tubing and connection fixed to wall or laid in trenches of size 50 mm dia, complete all as specified and as directed.
Taking up or down GI tubing and connection fixed to wall or laid in trenches of size 80 mm dia, complete all as specified and as directed.
Taking up or down GI tubing and connection fixed to wall or laid in trenches of size 100 mm dia, complete all as specified and as directed.
Supply and laying of galvanised steel water tubing medium grade (in replacement) trenches / wall /floor with all fittings , connections as required at site of size 15 mm bore, complete all as specified and as directed.
All as per Srl Item No. 26 above but bore of pipe 20 mm, complete all as specified and as directed.
All as per Srl Item No. 26 above but bore of pipe 25 mm, complete all as specified and as directed.
All as per Srl Item No 26 above but bore of pipe 40mm, complete all as specified and as directed.
All as per Srl Item No 26 above but bore of pipe 50mm, complete all as specified and as directed.
All as per Srl Item No 26 above but bore of pipe 80mm, complete all as specified and as directed
All as per Srl Item No 26 above but bore of pipe 100mm, complete all as specified and as directed
S&F gun metal globe valve (in replacement) with iron handle screwed both ends for iron pipe and fixed of size 15 mm bore, complete all as specified and as directed
All as per Srl Item No 33 above but bore of pipe 20mm, complete all as specified and as directed
All as per Srl Item No 33 above but bore of pipe 25mm, complete all as specified and as directed
All as per Srl Item No 33 above but bore of pipe 40mm, complete all as specified and as directed
All as per Srl Item No 33 above but bore of pipe 50mm, complete all as specified and as directed
Taking out existing U/S NRV of size 80-200 mm bore, complete all as specified and as directed
Suply and fixing cast iron NRV flanged end of size 200 mm dia with all fitting and accessories, complete all as specified and as directed.
All as per Srl Item No 39 above but 150 mm dia, complete all as specified and as directed.
All as per Srl Item No 39 above but 100 mm dia, complete all as specified and as directed.
All as per Srl Item No 39 above but 80 mm dia, complete all as specified and as directed.
M&L for cement concrete PCC 1:2:4 type B1 in plain cement concrete 20 mm graded coarse aggregate, complete all as specified and as directed.
M&L for road cutting and making good the same by bitumen, complete all as specified and as directed.
Replacement of Union in repair of 80 mm dia pipe in existing position of pipe including smoothing of threading etc., complete all as specified and as directed. Note:- Earth work will be measured and paid seperately
Replacement of Union in repair of 100 mm dia pipe in existing position of pipe including smoothing of threading etc., complete all as specified and as directed. Note:- Earth work will be measured and paid seperately
Replacement of Socket in repair of 80 mm dia pipe in existing position of pipe including smoothing of threading etc., complete all as specified and as directed. Note:- Earth work will be measured and paid seperately
Replacement of Socket in repair of 100 mm dia pipe in existing position of pipe including smoothing of threading etc., complete all as specified and as directed. Note:- Earth work will be measured and paid seperately
S & F in repair Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed fancy type of size 15mm bore dia. including taking out old unserviceable bib tap, complete all as specified and as directed.
Taking down the electric motor of 3 to 5 HP of centrifigual/monoblock Pumpset and transportation to any workshop for repair and back to Pump house after repair work, complete all as specified and as directed. (i) Dismantling the motor by taking out rotor and rewinding the burnt stator windings with standerd enamelled copper wire of existing size including packing/insulating material etc and varnish with 'F' class insulation varnish . (ii) Assembly after repair work and coupling with existing pumpset , including testing the pumpset to the satisfaction of the Engineer-in-Charge, complete all as specified and as directed. Any minor work adjustment /repair as in pump set deemed to be included in the job work.
Transportation of submersible pumpset 15 HP/17.5 HP complete with motor from MES(AGE E&M Sub divn) to any authorised workshop and back to store after carrying out thr repair work. (i) Dismantling the Pumpset and taking out thr burnt out motor and rewinding thr motor with std super enamelled copper wire of existing size including packing/insulating material/varnish etc. (ii) M&L for brass bush made to shape in lathe and fixing the same with shaft including any turning work required-01 job (iii) Assembly of motor and pump,testing the operation of pumping set to the satisfaction of the Engineer-in-Charge, complete all as specified and as directed by Engineer-in-Charge. Any minor work adjustment /repair as in pump set deemed to be included in the job work.
Brick masonry valve pit of size 90x90x90cms (internal dimension) with earth work in any type of soil, plain cement concrete M-10 type C-2 as in foundation, brick work in cement mortar 1:6 (01 cement : 06 coarse sand) 23cms thick, 15mm thick plaster in cement mortar 1:4 (01 cement : 04 coarse sand) internally and externally flush pointed in same mortar as the work proceeds flooring shall be 40mm thick in plain cement concrete M-15 (Nominal mix) laid over 75mm thick hard core top cover shall be made out of mild steel sheet 3.15mm thick fixed in angle iron frame made out of angle size 40x40x6mm with two number of hinges on one side and locking aggangement at other side with 50mm pad lock complete including painting with two coats of sythetic enamel pait over a coat of red oxide primer, complete all as specified including demolition Unserviceable pit & pit cover.
Supply and fixing in replacement of star delta starter 415 volts, 3 Phase suitable for submersible motor cap 15/17.5HP, complete all as specified and as directed.
Supply and fixing in replacement of star delta starter 415 volts, 3 Phase suitable for submersible motor cap 30 to 60HP, complete all as specified and as directed.
Supply and fixing in replacement of power contactor suitable for 100 Amps 415 volts, complete all as specified and as directed.
Supply and fixing in replacement of power contactor 60 Amps, 3 phase, 415 volts, complete all as specified and as directed.
Supply and fixing in replacement of thermal overload relay upto 100 Amps 3 phase, 415 volts, complete all as specified and as directed.
Supply and fix in replacement of thermal overload relay 30-45 Amps, complete all as specified and as directed.
Supply and fixing in replacement fuel filter of approved make for DG Set 12.5 KVA, complete all as specified and as directed.
Supply and fixing in replacement fuel filter of approved make for DG Set 50 KVA, complete all as specified and as directed.
Supply and fixing in replacement fuel filter of approved make for DG Set 62.5 KVA, complete all as specified and as directed.
Supply and fixing in replacement fuel filter of approved make for DG Set 82.5 KVA complete all as specified and as directed.
Taking of FIP from the Engine and Calibration of FIP (Fuel Injection Pump) 62.5 KVA DG Set at admissible pressure including minor spares etc testing and refitting, complete all as specified and as directed.
Supply and fixing in replacement air filters of approved make for DG Set 12.5 KVA, complete all as specified and as directed.
Supply and fixing in replacement air filters of approved make for DG Set 50 KVA to 82.5 KVA, complete all as specified and as directed.
Supply and fixing in replacement Lub oil filter of approved make for DG Sets 12.5 KVA, complete all as specified and as directed.
Supply and fixing in replacement Lub oil filter of approved make for DG Sets 50 KVA to 82.5 KVA complete all as specified and as directed.
Supply and filling Coolant in radiator assembly, complete all as specified and as directed.
S&F Alternator 12 V suitable for DG set 50 KVA to 82.5 KVA including dismantling of unserviceable alternater, complete all as specified and as directed.
Supply and filling lub oil 20 W 40 for topup/replacement including draining out old oil from Engine chamber, complete all as specified and as directed. Make:- Castrol,Servo or Equivalent.
Routine maintenance of DG set of capacity 82.5 KVA by carrying out the test check for belt tensioin,adjustment of valve clearance with clearance gap 0.4 mm for both inlet and exhaust valve and adjustment of tapped with filer gauge,replacement of changing gear and Flywheel and oil,cleaning of injector/Nozzles and spray check,servicing of self starter by replacement of carbon bushes,Terminal wires including cleaning with vaccum cleaner to wipe out unwanted materials/dust from alternator and other minor repairs/servicing of Engine, complete all as specified and directed.
All as per Srl item No. 71 above but of capacity 62.5/50 KVA DG set, complete all as specified and directed.
All as per Srl item No. 71 above but of capacity 12.5 KVA DG set., complete all as specified and directed.
Supply and replacement of battery copper lead minimum length 1 meter (-ve & +ve) as per existing size, complete all as specified and directed.
Supply and fixing in replacement fan belt V type suitable size for upto 82.5 KVA DG set, complete all as specified and as directed.
Supply and fixing in replacement of brass terminals heavy duty with clamp for battery lead (-ve & +ve), complete all as specified and directed.
Supply and fixing of battery12 V, 180 AH, complete all as specified and directed.
S&F Stop solenoid assy 12v/24v for DG set upto 82.5 KVA, complete all as specified and as directed.
S&F Starter switch for DG set upto 82.5 KVA, complete all as specified and as directed.
S&F fuel pipe from filter to FIP with benzo bolt as per sample suitable for DG sets upto 110 KVA, complete all as specified and directed.
S&F self Starter 12V as per sample suitable for DG set of capacity 50 KVA 12v operated, complete all as specified and directed.
Repair of battery charger suitable charging for 12 to 24 Volt including of replacement of defected parts as per existing-transformer 1 no., diode 2 nos complete and testing on site after repair and directed.
S&F ignition switch.suitable for DG set upto 82.5 KVA, complete all as specified and as directed.
Dismantling of self starter and remove of defected parts and replace suitable for DG set of 50 /82.5 KVA and fixing the same including testing, complete all as specified and as directed. (Defective spares part to be paid seprately)
Supply & fix in replacement Solenoid Switch, complete all as specified and as directed.
Supply & fix in replacement Armature, complete all as specified and as directed.
Supply and fix in replacement Field coil copper complete with all connected accessories including taking down, complete all as specified and as directed.
Supply and fix in replacement Carbon Brush along with connected accessories, complete all as specified and as directed.
Supply and fix in replacement gun metal gland bush, complete all as specified and as directed.
Supply and fix in replacement CI impeller suitable for upto 60 HP as on site pumping set as per existing size complete including replacement of bearing or bush complete including lathe work required to be done lathe or any other connected associated works, complete all as specified and as directed by Engr-in-Charge
Supply and fix in replacement MS coupling complete with rubber type complete with nuts, bolts and washers etc as per existing size, complete all as specified and as directed.
Dismantling of existing worn out/burnt induction motor 415 volts, 3 phase, 30 to 60 HP.complete including transportation to civil workshop and re-assembling after repairing as in original position and testing on completion with following, complete all as specified and as directed.
Re-winding of induction motor 415 volts upto 60 HP including dismantling and reinstallation motor with super enamelled copper winding wire of existing size complete including packing material and insulating varnishing, complete all as specified and as directed.
Supply and fixing in replacement MCCB 160A, 3 Pole 35 KA, complete all as specified and as directed.
Supply and fixing in replacement MCCB 125A, 3 Pole 16 KA, complete all as specified and as directed.
Supply and fixing in replacement MCCB 100A, 3 Pole 16 KA, complete all as specified and as directed.
Supply and fixing in replacement of digital amp meter of range 0-200 amps CT operated with CT aux supply 230 volt, complete all as specified and as directed.
Supply and fixing in replacement of indicator lamp assembly complete with indicator lamp Red/Yellow/Blue, complete all as specified and as directed.
M&L for Turbo charge repair kit complete suitable for DG set of capacity 82.5 KVA, complete all as specified and as directed.
Taking out the radiator assembly from DG Set of capacity 82.5 KVA to 50 KVA for cleaning/servicing and cleaning the radiator externally/internally and reinstallation after carrying out the job work, External Cleaning :- Removel of light deposits by using low pressure hot stream jet with addition of detergent and incase stuuborn deposits experienced the radiator to be immersed in a heated Alkali degreasent solution for 30 minutes and then washing off with hot water hose, complete all as specified and directed
All as per Srl item No. 102 above but Internal Cleaning:- Internal cleaning be done by prepration of solution of inhivited acid solvent with fresh water and circulation of acid solution in radiator for severel times descaling the acid solution by adding 700 gm of soda with 20 ltrs boiling water. Refining be done after pressure check, complete all as specified and directed.
Carrying out top over hauling of DG set 50 KVA to 82.5 KVA including opening of upper portion of diesel engine including taking out heads, pistons, water sleeve, inlet and exhaust valve to facilate the repair work, and assembly of engine after carrying out the overhauling work.The rates for transportation of Engine to any workshop and back to insttalation deemed to be included in the job. the labour charges for fixing item will also be part of job.The item requirefor fixing will be paid Supply and fix in replacement as under . Assemblng of engine after carrying out overhauling work and testing the same for its firing, prevention of any leakage and testing the same to the satisfaction, complete all as specified and as directed.
Supply and fix in replacement following parts to be fixed under above item No. 104 for DG set of capacity 50 KVA to 82.5 KVA, complete all as specified and as directed. (a) Fuel filter primary. (one new will be replaced during routine maintinance due after overhauling)
(b) Fuel filter secondary (one new will be replaced during routine maintinance due after overhauling)
(c) Lub oil filter (one new will be replaced during routine maintinance due after overhauling)
(d) Air cleaner filter
(e) Hose pipe set with clamps
(f) Flexible pipe with end connector
(g) Fan belt for charging alternator
(h) Fan belt for radiator
(i) Stop solenoid actuator
M & L for head decarbonising, grinding of valve seat, lapping of inlet and outlet valves refixing the same after replacement of rubber rings of 50 KVA to 82.5 KVA DG Set, complete all as specified and as directed.
Piston ringset of 50 KVA to 82.5 KVA DG Set after decarboising the piston grooves for proper control of oil flow, complete all as specified and directed.
Supply water sleeve assembly of 50 KVA to 82.5 KVA DG including cleaning and smoothing of bore of engine top block and testing the same for free movement of piston in the sleeve, complete all as specified and directed.
Head gasket set of 50 KVA to 82.5 KVA DG Set, complete all as specified and directed.
Supply and fix in replacement O-Tolidine Reagent for residual chlorine test for water analysis, complete all as specified and directed.
Supply and fix in replacement water testing kit for the estimation of residual chlorine test, complete all as specified and directed.
Calcium Hypochlorite 65% to 70% Chlorine content (Calcium based granular disinfectant for water treatment much more stronger than chlorine gas, and stronger than bleaching powder & sodium hypochloride packed in 45 Kg drums, complete all as specified and directed.
S& F PVC insulated Submersible copper cable 16 Sqmm 3 core, complete all as specified and directed.
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of new/serviceable cables or for fault finding in existing cable and getting out soil in soft/loose soil, complete all as specified and directed.
Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm, complete all as specified and directed.
Removing excavated material not exceeding 50 mtr and depositing where directed in a level not exceeding 1.5 mtr above the starting point of any type of soil, complete all as specified and directed.
M&L for sand cushioning to under ground cable provided with a layer of sand 8 cm depth before laying of cable and 15 cm depth after laying and stretching the cable, complete all as specified and directed. Note: Punned thickness of sand shall be measured & paid.
M&L for well burnt sub class 'B' bricks of nominal size 230X115X75 mm abutting each other for mechanical protection of cable with width equal to lenght of brick, complete all as specified and directed.
Taking out old underground serviceable/unserviceable cable of any type and size and keeping aside for the purpose of rerouting/relaying in new location/for requisite replacement/further disposal complete including taking out bricks, complete all as specified and directed.
Supply,Laying or passing through pipe underground cable PVC sheathed, XLPE insulated armoured LT 1100 volts grade with aluminium conductor of size 25 Sqmm, 4.0 core including making electrical connection, complete all as specified and directed.
Note :- An amount of Rs. 1,30,650.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.
M/s Gh Qadir and Sons
M/S ABBAS M. ENTERPRISES
M/S ABDUL RASHID AND CO
M/s M Ashraf and Brothers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .