GE 861 EWS-49/2024-25

Amount

Surface dressing n exe 15 cm deep in hard/dense soil complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 depth for foundation etc or for shafts well cesspits manholes pier holed etc n. exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in hard and dense soil complete all as specified and directed.

Excavating over areas, n exc1.5 m deep and getting out in soft /loose soil complete all as specified and directed.

Excavating over areas, exc 1.5 m depth but n exc 3.0m depth and getting out in soft /loose soil complete all as specified and directed.

M&L PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate in foundation filling and mass concrete / Bed concrete complete all as specified and directed.

M&L for RCC M-25 (design mix) (using 20 mm graded crushed stone aggregate) as in foundation, including rafts, footing, foundation beams, plinth beams, bases for columns etc basement slabs complete all as specified and directed.

M&L for RCC M-25 Design Mix concrete (using 20mm graded crushed stone aggregate) as in columns, pillars, piers, post and struts. Complete all as specified and directed.

M&L for RCC M-25 Design Mix concrete (using 20mm graded crushed stone aggregate) as in RCC bands, lintels over 1.5 span etc. complete all as specified and directed.

M&L for form work to sides of concrete foundations, footings, bases of columns, sides and soffits, plinth beams and similar work complete all as specified and directed.

M&L for use & waste of form work sides of RCC bands etc. complete all as specified and directed.

M&L for use & waste of form work sides of columns etc. complete all as specified.

S&F for mild steel TMT bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 12 above 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders but in stirrups. Complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius laid dry complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in cm (1:4) complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surface, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered surface of walls and applying two coats of cement base paint on walls over a coat of alkali resitant primer complete all as specified and directed.

M&L for preparing new plastered surface of wall and applying three coats of white wash on walls etc complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for broken stone hard core of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15cm thick, watered and well rammed to a true surface all as specified and directed.

M & L for 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base, floors and pavings etc. all as specified and directed.

M&L for Non skid ceramic coloured joint free tiles 400mmx400 mm 7 to 8mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15 mm thick in cement mortar (1:4) laying floor finish complete all as specified and directed.

M&L for Glazed ceramic tiles coloured of size 300x200x7mm/ 300X450X7 mm thick on vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including cement screed bed 10mm thick in cement mortar (1:4) complete all as specified and directed.

M & L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate ) as in plinth protection and similar works 75mm thick finished fair and smooth without using extra cement including necessary form work complete all as specified and directed.

S & F for mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters etc complete all as specified and directed.

S & F for Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F for Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet as in ridge , 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F mils steel work for Hand rails, half round or other stock section , nosing to steps embedded in concrete and screwing etc. wind ties for roof including securing bolts and similar work conforming to Fe 290 gde E 165 complete all as specified and directed.

S & F for steel ventilators with top hung shutters including hinges, steel peg stay complete including one shop coat of red oxide primer complete all as specified and directed.

S & F figured glass, pin head type 3 mm thick, ordinary quaility, not exceeding 0.5 Sqm in each pane and glazed with oil putty in square complete all as specified and directed.

S & F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails complete to be prepared for hanging or sliding of doors etc. complete all as specified and directed.

S & F 1.25 mm thick mild steel, plain, black sheet as in door covering, wall cladding, steel gates and similar work, cut to size, holes punched; including round screws, cleats, nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed.

M & L for preparing New or previously untreated steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5 mm single side prelaminated PVC sheet reinforced with MS square tube manufactured as per SSR Part-I specifications and drawings complete all as specified and directed.

S&F factory made solid panelled PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and gap insert for top rail and bottom rail panelling of plain colour PVC to sheet to be fitted in the MS frame welded / sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

S&F aluminium anodised barrel tower bolts extruded section of size 150 mm long complete all as specified and directed.

S&F aluminium handle extruded fabricated type anodised of size 150 mm complete all as specified and directed.

S&F for butt hinges 100mm medium weight cold rolled mild steel complete all as specified and directed.

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connections of flush pipe to squat pattern closet including lime concrete bedding and all joint making good to the floor complete all as specified and directed.

S & F vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (min), with grating and union of suitable size including urinal spreader of PTMT any colour for fixing with 15 mm bore pipe. (Minimum weight 60gms) & pvc waste pipe) complete all as specified and directed.

S&F floor stainless steel gratings 125mm dia complete all as specified and directed.

S&F PVC valve less 10 litre capacity syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F Vitreous china wash hand basin, Vitreous china white, flat back, size 550 x 400 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand Including S&F 15mm bore CP pillar tap, CP brass waste coupling 32mm dia and 32mm dia PVC waste pipe) complete all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F 100 cast iron sanitary connection for WC complete all as specified and directed.

S&F 75 mm dia CI floor trap, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) complete all as specified and directed.

S&F cast iron Nahani trap 110 mm dia including jointing to pipe complete all as specified and directed.

S&F 15 mm bore fancy type CP bib taps cost copper alloy with crutch or butterfly nuts , handle, screwed down for iron pipe complete all as specified and directed.

S&F 15 mm bore CP stop/angle valve cost copper alloy screwed down , high pressure with crutch or butterfly handle fancy type complete.

S&F for Rotational moulded polyethylene 500 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed.

S & F for brass chromium plated towel rail, 20mm dia , "D" type, 60cm long between flanges including brackets both sides complete all as specified and directed.

S & F gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed for bore of pipe 20 mm complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor complete all as specified and directed.

S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor complete all as specified and directed.

S&F 75mm PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed

S&F 75mm PVC (SWR) vent cowl complete all as specified and directed.

S&F for 15 mm bore GI tubing medium grade galvanised with all fittings and fixed complete to walls & floors etc. Complete all as specified and directed

S&F for 20 mm bore GI tubing medium grade galvanised with all fittings and fixed complete to walls & floors etc. Complete all as specified and directed

M & L for PCC 1:4:8 type D2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested for pipes of 150 mm bore complete all as specified and directed.

M & L 150 mm dia Salt Glazed stone ware drain pipes laid in trenches and jointed with cement mortar 1:1 complete all as specified and directed.

M&L for cement concrete type B-1, 1:2:4 using 20mm graded crushed stone aggregate as in coping of masonry wall including weathering slightly rounded or chamferred angles and throating as directed including necessary form work complete all as specified and as directed.

M&L for Precast reinforced cement concrete 1:2:4, type B1 (Using 20 mm graded granite stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed.

Returning, filling in trenches, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated soil not exceeding 50 m distance and depositing where directed at a level n exc 1.5 metre above the starting point complete all as specified and directed.

M&L for 100 mm thick PCC (1 :3:6 ) type C2 (using 40 mm graded crushed stone aggregate ) as in sub base for floor finishes of floor complete all as specified and directed.

M&L for rubber moulded (rubberised) machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment, confirming to IS-15658-2006 of 60 mm thick M-40 grade laid over and including 40 mm thick sand cushioning complete all as specified

M&L for RCC M-25 ( Design Mix) concrete (using 20mm graded crushed stone aggregate) as in shelves /slabs supported on walls, beam and columns, in floors, roof, landings, balconies, slabs in helves and the like complete all as specified and directed.

M&L for form work to soffits of suspended slabs such as roof slabs/shelves floor slabs etc, landing and similar work, not exe 200mm thick (horizontal or sloping ) for fair finish surface all as spd.

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

Taking down chowkhat or frames with shutters exc 1.5 sqm but n exc 4 sqm each (w/o taking of shutters from the frame) complete all as specified and directed.

Taking down chowkhat or frames not exc 1.5 sqm each(w/o taking of shutters from the frame) complete all as specified and directed.

Demolition of cement concrete (unreinforced in ground floors & pavings n.exc 15 cm thick (below or above ground level) complete all as specified and directed.

Demolition of brick or stone masonry built in cement mortar including all necessary arches quoins etc. complete all as specified and directed.

M&L for 50 mm thick PCC 1:4:8, type D-2 and in sub base using 40 mm graded crushed stone aggregate complete all as specified and directed.

M&L for kota stone slab flooring 20-25 mm thick laid over and including 15mm thick screed bed in cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match th shade of the slab including rubbing and polishing laid over complete all as specified and directed.

All as per item No 83 above but on vertical surfaces of walls /skirting/dado etc laid over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for cement concrete type C-1, 1:3:6 (20mm graded crushed stone aggregate), 50mm thick as in plinth protections finishing even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:6 on other than fair faces of brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparation by applying 3 mm thick wall care putty on new plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer, preparatory to distempering complete all as specified and directed.

M&L for 2nd class hard wood, plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 2nd class hard wood 40 mm thick plain framed panelled shutter (two panel) with lock rail and panel of 9 mm thick B.W.P. commercial plywood or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated and fixed to chowkhats complete all as specified and directed.

Supply and fixed 30 mm thick 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc (internal sash bars) edges of framing plane, chamfered or rounded fitted and mitred beads for securing glass etc size of members as specified in SSR Part-I Section 8 clause 8.24(b) (kail) complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed

S&F aluminium anodised barrel tower bolts extruded section of size 200mm complete all as specified and directed.

S&F aluminium anodised barrel tower bolts extruded section of size 150mm complete all as specified and directed.

S&F aluminium handle extruded fabricated type anodised of size 150 mm complete all as specified and directed.

S&F aluminium handle extruded fabricated type anodised of size 100 mm complete all as specified and directed.

S&F butt hinges 100mm medium weight cold rolled mild steel complete all as specified and directed.

S&F for butt hinges 75 mm medium weight cold rolled mild steel complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness of roof covering complete all as specified and directed.

Dismantling wall and ceiling boards with snap grid (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F for anodised aluminium snap grid of size 605x605 mm frame work for false ceiling including straining with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F for 10 mm thick PVC insulation panels with EPS stuck to 1 mm thick plain PVC sheet suitably placed in false ceiling grid made of aluminium & GI/MS complete all as specified and directed.

M&L in repairs for weather boarding in 2nd class hardwood clean swan , plain, 20 mm thick or feather edeged , 15 mm to 20 mm th and fixed with 30 mm laps joints complete all as specified and directed.

M&L for two coats of synthetic enamel paint on NEW WOODEN surfaces over a coat of pink primer including preparation of surfaces, over 10cm width or girth complete all as specified and directed.

Material and labour preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint including preparation of surfaces complete all as specified and directed.

M&L for chequered cement concrete tiles 30cmx30cmx25mm thick with grey cement and pigment , set , jointed and pointed in neat cement slurry in floors laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Dismantling timber scantling 40 sqcm and over in section in any position in unframed work complete all as specified and directed.

S&F timber in framed work of second class hard wood as in scantling etc fixed complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft loose soil complete all as specified and directed.

Excavation in post holes each n.exc 0.5 cum and returning filling in and ramming earth or broken rubble mixed with earth around , in layers not exc 25 cm in hard and dense soil complete all as specified and directed.

M&L for cement concrete type B2, 1:2:4 (using 40mm graded crushed stone aggregate) for fixing of post complete all as specified and directed.

S&F mild steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-290 (Gde E 165) complete all as specified and directed.

S&F mild steel plates/flats, angle etc as in cleat gusset plate including drilling welding etc. Fe-290 (Gde E 165) complete all as specified and directed.

M&L Hard core of gauge exc 63mm but n.exc 100 mm, broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L for 100 mm thick PCC (1:2:4) type B2 (using 40 mm graded crushed stone aggregate) as in hard standing floor finishes etc. laid in alternate panels complete all as specified and directed.

M&L for cement concrete type C2 1:3:6 (40mm graded crushed stone aggregate) for fixing of fencing posts/posts complete all as specified and directed.

S&F in repairs for 20mm thick pre-polished granite slabs, machine cut, in vertical/horizontal surfaces over and including 15mm thick cement plastering (1:4) and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of the granite stone including grinding and polishing complete all as specified and directed.

M&L for loose filling with broken bricks aggregates of gauge 80 to 150mm in soakage pits and soakage wells complete all as specified and directed.

Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc. complete all as specified and directed.

M&L for point wiring complete for light/ fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLS PVC insulated multistranded unsheathed copper conductor, drawn in PVC casing & capping and including pipe hooks , elbows, junction covers and junction boxes, after fixing or cutting on wall chasing for conduits and sinkings for sunken cast iron/ pressed steel terminal boxes 60mm deep ,suitable length and thickness for mounting, switches, sockets, fan regulator with 3 mm thick plastic laminated sheet cover fixed with brass screwed and cup washers, duly fixed on wall or grouting and painted with red oxide metal primer and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly complete all as specified and directed.

All as per srl item No-119 here in above but for one 5A socket outlet on the same board controlled by one switch complete all as specified and directed.

All as per srl item No-119 here in above but for one 3 pin 5A socket outlet independent controlled by one switch complete all as specified and directed.

Description all as per item No 119 above but for 3 pin socket outlet 15 Amps independent board with 2.5 Sqmm complete all as specified and directed.

M & L for point wiring complete for 20 Amps independent /combined board with cable 4.0 sqmm (Nominal area) FRLS PVC insulated multistranded unsheathed copper conductor, drawn in PVC casing & caping and including pipe hooks , elbows, juction covers and junction boxes , after fixing or cutting on wall chasing for conduits and sinking's for sunken cast iron/ pressed steel terminal boxes 60mm deep ,suitable length and thickness for mounting, switches, sockets, fan regulator with 3 mm thick plastic laminated sheet cover fixed with brass screwed and cup washers, duly fixed on wall or grouting and painted with red oxide metal primer and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 2.5 sqmm copper PVC insulated cable for geyser sheet metal enclosure and connected to common earth dolly complete all as specified and directed.

S&F for Switch Socket combination 2 in 1, 5 Amps flush type, 230 volts complete all as specified and directed.

S&F for Switch Socket combination, 6 pin 5 and 15 amps multi purpose 2 in 01 flush type, 230 volts complete all as specified and directed.

S&F switch piano flush type 5/6 Amps single pole one way complete all as specified and directed.

S&F Socket 2 in 1, 5 Amps flush type, 230 volts complete all as specified and directed.

S&F fan regulator Electronic type complete all as specified and directed.

S&F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and directed.

Supply and fixing sheet metal enclosure with socket plug top single phase and neutral enclosure with a two pin and earth plug and socket complete with single pole MCB 20 amps, B curve complete all as specified and directed.

S&F LED lights fitting 1x20W, 230V, AC decorative box type with drive, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED lights fitting 1x10W, bulk head luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete ase of suitable size from ceiling rose complete all as specified and directed.

S&F ceilings fans complete with blades, down rods, electronic requlators and accessories, 230V, 1200MM sweep, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brush less direct current motor (BLDE) complete all as specified and directed.

S&F exhaust fan 300 mm sweep sturdy engineering plastic complete with louvers shutters, voltage 230V, 50Hz, RPM 1200, copper winding making hole in wall wherever required and connecting electrically to ceiling rose or connector block using PVC insulated and overall sheathed 3 core cable of size 1.50 Sqmm with flexible copper conductor complete all as specified and directed.

S&F in repair energy efficient highly rating heavy duty exhaust fan 300mm sweep with louvers including making hole in wall as it where required and connecting electrically to ceiling rose or connector block using PVC insulated and overall sheathed 3 core cables of size 1.50 sqmm flexible copper conductor all as required at site complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection pipe, PVC connection of 15 mm bore with brass chromium plated nuts of length 450 mm suitable for hot water and cold water for geysers ) including fixing arrangement like clamps , nuts, bolts washers, suitable type of fasteners and making good the disturbed surfaces as per existing etc complete all as specified and directed.

Supply and fixing MCB 32 to 40 Amps SP 240 volts, 10 kA ' B curve complete all as specified and directed.

Supply and fixing GI pipe 15 mm bore medium grade ISI marked with fitting and making connection for geysers inlet water in the existing GI pipe /tanks and making good the disturbed surface with cement mortar 1:4 complete all as specified and directed.

Supply and fixing stop valve cast copper alloy high pressure with crutch or butterfly handle 15 mm bore complete all as specified and directed.

S&F Bib tap, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F laying in trenches, pole, and along wall etc complete, XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 volt grade, cross sectional area 16 sq mm 2 core complete all as specified and directed.

S&F laying in trenches, pole, and along wall etc complete,XLPE insulated, armoured heavy duty electric cable with strended aluminium conductor,1100 volt grade,cross sectinal area 10 sq mm 2 core complete all as specified and directed.

Excavation in trenches in n. exc 1.5 mtr vide and 1.5 mtr in depth and getting out in soft/loose soil for laying of U/G cable complete all as specified and directed.

M&L for sand cushioning in trenches for cable protection complete all as specified and directed.

M&L for bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' bricks laid across the cable complete all as specified and directed.

S&F GI water tubing 40 mm bore, medium grade (ISI marked) laid in trenches including fittings as required at site complete all as specified and directed.

M&L for submain wiring with two single core PVC insulated flexible copper conductor cable of size 4 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 4 Sqmm as earth lead in & including concealed PVC casing capping medium grade 2mm thickness ISI marked cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification incl taking down old unserviceable gi pipe complete all as specified and directed.

S&F sheet metal enclosure MCB distribution board, double door with IP -43 protection single phase 240 volts 4 way, including suitable size copper bus bar and neutral link, fixed flush in wall including making chases in wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

S&F sheet metal enclosure MCB distribution board, double door with IP -43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

Supply and fix in replacement MCB SPN, 240 volts any rating from 40-63 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.

Supply and fixing MCB 32 to 40 Amps SP 240 volts, 10 kA ' B curve complete all as specified and directed.

M&L for MCB single pole 240 volts 5 to 32 amps as per site requirement , with rupturing capacity 10 KA as per IS-8828-1996 (IEC-60898), disconnect upper and lower terminals , integrated label holder to ensure circuit identification complete all as specified and directed.

Material & labour for earthing complete with galvanised cast iron earth plate electrode of size 600x600x6.0mm thick busied directly in ground less than 3.0m deep below normal ground level as earth electrode with top edge of the earth plate not less than 2.25mtr below ground level using GI strip 32x6 mm dia as earth continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC 1:3:6 adequate quantity of charcoal dust and salt and kalmi shora all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 3 of SSR part I 2009 or directed by Engineer-in-charge and incl testing on completion. (i) Main earthing lead from earth plate electrode to test point up to length of 7.5 meters shall deem to be included in the unit rate quoted against this item . (ii) GI protection pipe & earthing lead beyond 7.5 meter shall be measured and paid for separately under appropriate item. (iii) On testing after completion if the desired resistance is not obtained the contractor shall redo the earthing without any extra cost to the department .

M/S A.N CONSTRUCTIONs (BID ID -3121464)

BHAT CONSTRUCTIONS AND BUILFERS (BID ID -3135285)