Repair/replacement of damaged roof of M and N Type quarters at Ordnance Estate, Ambernath

Amount

Repair/replacement of damaged roof of ‘M’ & ‘N’ Type quarters at Ordnance Estate, Ambernath.

Dismantling of Single layer Mangalore pattern or similar tiles in roofing

Dismantling of Single layer Mangalore pattern or similar tiles embedded inin lime or cement mortar

Dismantling of Battens for tiles, shingles etc, of any size including tilting fillets, spaced exc 15cm.

Dismantling in fillets, rails, posts, rafters,purlins, etc. under 40 sq. cm in section unframed work

Dismantling of Wall and ceiling boards (AC sheet, wooden plywood etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Dismantling posts or struts (wood, steel or R.C.C.) any section, embaded in cement, brick, mesonary etc. including taking out embedded in Concrete, brick work, masonry, etc portion and making good disturbed ground

Dismantling barge boarding, any description, fixed in any position with nails

S&F Mangalore pattern or similar roofing tiles, interlocking at side joints, laid dry.

S&F Galvanised, corrugated mild steel sheeting, 0.63 mm thick with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275. ( make- Tata / Jindal/similar brand )

S&F plain galvainised, mild steel sheeting, 1.00 mm thick, in ridges, hips, valley gutters, drip and straight flashings, with grade of zinc coating 275. (make: Tata /Jindal/similar brand )

S&F Ridge tiles or hip tiles to suit mangalore pattern roofing tiles, bedded and jointed in cement mortar 1:6.

S&F IInd Class hard wood clean sawn, battens at 30 cm centre to centre, cross sectional area exc. 5 sqcm and n.exc. 15 sqcm

M&L for 2nd class hard wood in scantling, timber fixed with clean sawn wood.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

S&F in repairs, Asbestos cement plain building boards, 6mm thick, fixed to timber framework with screws add if fixed

Repairs or if refixed in old position, 2nd class hardwood, fillets. bullnosed, splayed, chamfered or rounded on one edge or face, Exc 3 & n. exc 6 sq.cm or rectangular exc. 6 sq.cm but n.exc. 13 sq.cm. bullnosed, splayed, chamfered or rounded on one edge or face

S&F Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections Fe 410 -W (Gde- E- 250) quality- A

M&L of Cement concrete in foundations, filling and mass concrete Type B2, 1:2:4 using 40mm aggregates.

S&F 2nd class hardwood Boarding, supplied & fixed with nails in any situation (except flooring and skirting) Planed one side with butt joints 20 mm thick

Applying & treating Tiles or slate battens, any size and spacing, prepared and treated all over (measured overall on one side only, spaces not deducted) with creosote.

M&L for Preparing surfaces of wood and wood based materials, new surfaces any description and girth, applying one coat of synthetic oil paint over a coat of pink primer.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6

M&L Rendering, plastering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6, finished even smooth finish using extra cement

M&L Preparation of new or previously untreated steel & iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying Two coats of synthetic enamel ordinary tint , over a coat of primer red oxide zinc chrome

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

M&L Cutting holes in brick walls built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, exc. half brick but not exc. one brick

S&F MS angle for wind ties roof including securing bolts including embeding in concrete including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 4.0 km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination

Dismantling & taking down of wrought iron or mild steel work of any description

Erection fixing only Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections Fe 410 -W (Gde- E- 250) quality- A

M&L Preparing surfaces plastered or unplastered old surfaces on ceilling applying two coat oil emulsion on ceilling surface

Old AC corrugated sheets (Credit Item)

Old MS angles, tee, GI plain sheet/corrugated sheet ,MS valley gutter etc. & other sections. (Credit Item)

KUGANCONSTRUCTIONS