Special repair and maintenance of Himachal Emporium at Rangmahal Chamba Distt. Chamba (HP).

Amount

Demolition below G.L.Un-reinforecd cement concrete upto all Thickness & upto all depth and disposal of unserviceable materials within all lead and lifts.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) including curing and carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing 10mm thick anti skid water proof stain and impect resistent doublecharged heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carraige of material within all lead and lifts.

Dismantling cement asbestos celotax/hard board in ceiling or partition wall including stacking of serviceable materials and disposal of un-serviceable materials within all lead and lifts.

Providing and fixing PVC false Ceiling made up of high quality PVC panels (5-9 mm thick) including necessary aluminium frame work, screws etc.complete in all respects

Providing and fixing 3mm thick ACP Sheet of required shade as approved by the Enginner in Charge including fitting with necessary screws complete including carriage of material with in all lead and lifts.

Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built upstandard tubular sections/ appropriate Z sections andother sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of requireddia and size, including necessary filling up the gaps atjunctions, i.e. at top, bottom and sides with requiredEPDM rubber/ neoprene gasket etc. Aluminium sectionsshall be smooth, rust free, straight, mitred and jointedmechanically wherever required including cleat angle,Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-incharge including carriage of material with in all lead and lifts: (A) For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and Fixing board partitions with butt jointing and nails (frame work and cover fillets to be measured and paid for separately) Particle board bwp phenol bonded exterior/interior grade in partitions Prelaminated board bwp phenol bonded exterior/interior grade both sides. 12mm thick including carriage of material with in all lead and lifts

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.) glazing with glass panes of 4mm thickness (weight not less than 10.00 kg/sqm.) including carriage of material with in all lead and lifts

Providing and fixing chromium plated brass handles with necessary screws etc. complete including carriage of material with in all lead and lifts. (a) 100 mm

Providing and fixing 65x35mm special quality chromium plated brass cup board lock with six leavers including necessary screws etc. complete including carriage of material with in all lead and lifts

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. Complete including carriage of material with in all lead and lifts. (a) 100x10mm

Taking out doors, windows and clerestory windows shutters (steel or wood) including stacking & carriage of material with in all lead and lifts

Providing and fixing fly proof galvanised M.S. wire gauge of IS gauge designation 85 g with wire of dia 0.56 mm to windows and clerestory windows including beading aluminium including carriage of material with in all lead and lifts.

Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws Plain grill including carriage of material with in all lead and lifts.

Supplying and fixing rolling shutters of approved make made of 80 mm X 1.25mm M.S laths interlocked together through their entire length and joined together at the end by end locks mounted on specially designed pipe shaft,with brackets side guides and arrangements for inside and outside locking with push pull operation complete but excluding the cost of the top cover and spring. Shutters having width below 3.5 metres including carriage of material with in all lead and lifts.

Providing and fixing 27.5 centimetre long wire spring grade No.2 for rolling shutters including carriage of material with in all lead and lifts.

Providing and fixing top cover for rolling shutters. Shutters having width bElow 3.5 metre. including carriage of material with in all lead and lifts.

Providing and fixing ball bearing for rolling shuttersincluding carriage of material with in all lead and lifts.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade .painitng two or more coat including carriage of material with in all lead and lifts.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete 250x16mm including carriage of material with in all lead and lifts.

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete including carriage of material with in all lead and lifts.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including carriage of material with in all lead and lifts.

Brick work using common burnt clay building bricks in superstructure in Cement Mortar 1:6 (1 Cement : 6 Sand) First Class Bricks including carriage of material with in all lead and lifts.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth.Cement Mortar 1:6 (1 cement:6 sand) including carriage of material with in all lead and lifts.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.) glazing with glass panes of 8mm thickness toughened glass including carriage of material with in all lead and lifts.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete

MAHINDER SINGH (BID ID -454353)

VINAY SHARMA (BID ID -454436)