Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.6 LAccepted-AOC 10TH MILE RISHI ROAD KALIMPONG DISTRICT DARJEELING PIN 734301 | KALIMPONG | DARJEELING | WEST BENGAL | 734301 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹41.7 L+₹10,930 (0.26%)Rejected-AOC | L2 | Rejected-AOC NOT LOWEST | |
| 3 | L3₹42.7 L+₹1.1 L (2.67%)Rejected-AOC | L3 | Rejected-AOC NOT LOWEST | |
| 4 | L4₹43.1 L+₹1.5 L (3.62%)Rejected-AOC | L4 | Rejected-AOC NOT LOWEST | |
| 5 | L5₹43.5 L+₹1.9 L (4.62%)Rejected-AOC | L5 | Rejected-AOC NOT LOWEST |
| Sl No | Description | Qty | Unit | GARGO TRADERS L1 | M/S G. K. SUTHAR L6 | PRASAD PRADHAN AND SON L2 | HEM RAJ GURUNG L3 | RAJU TAMANG L7 | MANOJ JINDAL L4 | M/S JAYSHREE CONCERN L8 | GYANENDRA THAPA L5 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or salimar pattern roof coverings, complete all as specified and as directed. | 170 | Sqm | 75 ₹12,750 | 85 ₹14,450 | 75 ₹12,750 | 76 ₹12,920 | 79 ₹13,430 | 77 ₹13,090 | 79 ₹13,430 | 73 ₹12,410 Lowest |
| 2.00 | Supply & Installation Pre-painted, High Tensile 550 Mpa yield strength, Bare Galvalume Steel Sheet having maximum pitch of 250mm c/c & minimum 30mm crest depth in length as per site requirement. The galvalume sheet is to be manufactured out of 0.50mm (TCT) (Total Coated Thickness), with zinc-aluminium alloy of AZ-150. The GI based steel sheet shall have a hot dip metallic zinc-aluminium alloy coating of zinc (43.5%), aluminium (55%) & Silicon (1.5%). The profile is having return leg for proper side lap. The sheet shall be fixed using self Drilling/Self Tapping Screw with EPDM Seal Complete all as per manufacturers specifications, complete all as specified and as directed. | 155 | Sqm | 1,690 ₹2,61,950 Lowest | 1,780 ₹2,75,900 | 1,700 ₹2,63,500 | 1,742 ₹2,70,010 | 1,793 ₹2,77,915 | 1,759 ₹2,72,645 | 1,810 ₹2,80,550 | 1,776 ₹2,75,280 |
| 3.00 | Supply & Installation Pre-painted, High Tensile 550 Mpa yield strength, Bare Galvalume plain Steel Sheet. The galvalume sheet is to be manufactured out of 0.50mm (TCT) (Total Coated Thickness), with zinc-aluminium alloy of AZ-150. The GI based steel sheet shall have a hot dip metallic zinc-aluminium alloy coating of zinc (43.5%), aluminium (55%) & Silicon (1.5%). The profile is having return leg for proper side lap. The sheet shall be fixed using self Drilling/Self Tapping Screw with EPDM Seal Complete all as per manufacturers specifications, complete all as specified and as directed. | 15 | Sqm | 1,650 ₹24,750 Lowest | 1,800 ₹27,000 | 1,650 ₹24,750 Lowest | 1,691 ₹25,365 | 1,740 ₹26,100 | 1,707 ₹25,605 | 1,757 ₹26,355 | 1,724 ₹25,860 |
| 4.00 | Dismantling wrought iron or mild steel work of any description, complete all as specified and as directed. | 3.3 | Qtl | 1,000 ₹3,300 Lowest | 1,050 ₹3,465 | 1,000 ₹3,300 Lowest | 1,025 ₹3,382.5 | 1,055 ₹3,481.5 | 1,035 ₹3,415.5 | 1,065 ₹3,514.5 | 1,045 ₹3,448.5 |
| 5.00 | S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410-W (Gde 250 quality A), complete all as specified and as directed. | 250 | Kg | 200 ₹50,000 Lowest | 225 ₹56,250 | 220 ₹55,000 | 225 ₹56,250 | 232 ₹58,000 | 227 ₹56,750 | 234 ₹58,500 | 229 ₹57,250 |
| 6.00 | S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A), complete all as specified and as directed. | 80 | Kg | 200 ₹16,000 Lowest | 225 ₹18,000 | 220 ₹17,600 | 225 ₹18,000 | 219 ₹17,520 | 227 ₹18,160 | 234 ₹18,720 | 229 ₹18,320 |
| 7.00 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet, complete all as specified and as directed. | 72 | Sqm | 70 ₹5,040 | 68 ₹4,896 Lowest | 70 ₹5,040 | 71 ₹5,112 | 73 ₹5,256 | 72 ₹5,184 | 74 ₹5,328 | 69 ₹4,968 |
| 8.00 | Dismantling timber scantling 40 sqcm and over in section, in any postion (frame work), complete all as specified and as directed. | 0.75 | Cum | 1,600 ₹1,200 Lowest | 1,650 ₹1,237.5 | 1,600 ₹1,200 Lowest | 1,640 ₹1,230 | 1,688 ₹1,266 | 1,656 ₹1,242 | 1,704 ₹1,278 | 1,672 ₹1,254 |
| 9.00 | Dismantling timber in fillets, rails, posts, rafters, pulins etc. under 40 sqcm in section fixed in any position framed work, complete all as specified and as directed. | 90 | RM | 10 ₹900 | 12 ₹1,080 | 10 ₹900 | 9 ₹810 Lowest | 10 ₹900 | 10 ₹900 | 10 ₹900 | 10 ₹900 |
| 10.00 | S&F false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmX600mm. Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmX600mm. Suspensor system (Grid) made out of GI sheet main Tee of size 23.5mmx38.50mmX0.36mm and cross Tee of size 23.5mmX23.5mmX0.36mm and angle size 19mmx19mmX0.36 mm. Grid of modular size 600mmX600mm shall be supported by 4 mm dia G.I. wire from purlins/soffit with and including 4mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part 4, 5, 6, 7 & 8, complete all as specified and as directed.
(Make : Everest or equvalent as approved by GE) | 72 | Sqm | 2,200 ₹1,58,400 Lowest | 2,400 ₹1,72,800 | 2,200 ₹1,58,400 Lowest | 2,255 ₹1,62,360 | 2,321 ₹1,67,112 | 2,277 ₹1,63,944 | 2,343 ₹1,68,696 | 2,299 ₹1,65,528 |
Tender Value
₹37.5 L
EMD Value
₹75,100
Closing Date
28 May 2026, 6:00 pmClosed
GARRISON ENGINEER
GE 867 EWS c/o99 APO
SPL REPAIR TO BLDG NO P370 (OR MD ACCN) OF 527 ASC BN AT KALIMPONG MIL STN UNDER GE 867 EWS
2026_MES_763886_1
8576/E8
Open Tender
Civil Works
Item Rate
180 days
KALIMPONG
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE 867 EWS
₹75,100
11 Aug 2026
7 May 2026
4 Jun 2026
7 May 2026
28 May 2026
21 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or salimar pattern roof coverings, complete all as specified and as directed. | 170 | Sqm | - | - |
| 2 | Supply & Installation Pre-painted, High Tensile 550 Mpa yield strength, Bare Galvalume Steel Sheet having maximum pitch of 250mm c/c & minimum 30mm crest depth in length as per site requirement. The galvalume sheet is to be manufactured out of 0.50mm (TCT) (Total Coated Thickness), with zinc-aluminium alloy of AZ-150. The GI based steel sheet shall have a hot dip metallic zinc-aluminium alloy coating of zinc (43.5%), aluminium (55%) & Silicon (1.5%). The profile is having return leg for proper side lap. The sheet shall be fixed using self Drilling/Self Tapping Screw with EPDM Seal Complete all as per manufacturers specifications, complete all as specified and as directed. | 155 | Sqm | - | - |
| 3 | Supply & Installation Pre-painted, High Tensile 550 Mpa yield strength, Bare Galvalume plain Steel Sheet. The galvalume sheet is to be manufactured out of 0.50mm (TCT) (Total Coated Thickness), with zinc-aluminium alloy of AZ-150. The GI based steel sheet shall have a hot dip metallic zinc-aluminium alloy coating of zinc (43.5%), aluminium (55%) & Silicon (1.5%). The profile is having return leg for proper side lap. The sheet shall be fixed using self Drilling/Self Tapping Screw with EPDM Seal Complete all as per manufacturers specifications, complete all as specified and as directed. | 15 | Sqm | - | - |
| 4 | Dismantling wrought iron or mild steel work of any description, complete all as specified and as directed. | 3.3 | Qtl | - | - |
| 5 | S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410-W (Gde 250 quality A), complete all as specified and as directed. | 250 | Kg | - | - |
| 6 | S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A), complete all as specified and as directed. | 80 | Kg | - | - |
| 7 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet, complete all as specified and as directed. | 72 | Sqm | - | - |
| 8 | Dismantling timber scantling 40 sqcm and over in section, in any postion (frame work), complete all as specified and as directed. | 0.75 | Cum | - | - |
| 9 | Dismantling timber in fillets, rails, posts, rafters, pulins etc. under 40 sqcm in section fixed in any position framed work, complete all as specified and as directed. | 90 | RM | - | - |
| 10 | S&F false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmX600mm. Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmX600mm. Suspensor system (Grid) made out of GI sheet main Tee of size 23.5mmx38.50mmX0.36mm and cross Tee of size 23.5mmX23.5mmX0.36mm and angle size 19mmx19mmX0.36 mm. Grid of modular size 600mmX600mm shall be supported by 4 mm dia G.I. wire from purlins/soffit with and including 4mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part 4, 5, 6, 7 & 8, complete all as specified and as directed.
(Make : Everest or equvalent as approved by GE) | 72 | Sqm | - | - |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.18 MB
Tender.pdf
Tender Documents • 1.18 MB
BOQ_855633.xls
BOQ • 0.99 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .