Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.1 CrAdmitted-Finance | ₹5.1 Cr | L1 | Admitted-Finance |
| 2 | L2₹5.4 Cr+₹25.8 L (5.06%)Admitted-Finance | ₹5.4 Cr+₹25.8 L (5.06%) | L2 | Admitted-Finance |
| 3 | L3₹5.5 Cr+₹38.8 L (7.61%)Admitted-Finance | ₹5.5 Cr+₹38.8 L (7.61%) | L3 | Admitted-Finance |
| 4 | L4₹5.6 Cr+₹54.0 L (10.6%)Admitted-Finance | ₹5.6 Cr+₹54.0 L (10.6%) | L4 | Admitted-Finance |
| 5 | Rejected-Technical | - | - | Rejected-Technical Non Responsive |
| Sl No | Description | Qty | Unit | M/S MEHRAJUDIN DAR L1 | MOHAMMAD AYOUB NAIK L2 | NAZIR AHMAD WANI L3 | SABZAR AHMAD ROY L4 |
|---|---|---|---|---|---|---|---|
| 1.00Felling trees of the girth (measured at height of 1 Mtr above ground level ) incld: cutting of trunk and branches, removing of the roots and stacking of serviceable material and disposal of unserviceable material etc complete | |||||||
| 1.01 | Beyond 30 Cm girth upto and incld: 60Cm girth | 70 | No | - | - | - | - |
| 1.02 | Beyond 60 Cm girth upto and incld: 120 Cm girth | 80 | No | - | - | - | - |
| 2.00 | Engagement of JCB for removing of undulations and surface correction incl. disposal of material as directed. | 8 | Hours | - | - | - | - |
| 3.00 | Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches, drains, pipes and cables etc. (not exceeding 1.5mtr in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5mtr including getting out excavated soil and disposal of surplus soil as directed, within a lead of 50 mtr. All kinds of soil | 2,084.86 | Cum | - | - | - | - |
| 4.00 | Providing/Laying stone soling Nallah hand packed on level in foundation trenches . Incld: all carriages complete | 167.47 | Cum | - | - | - | - |
| 5.00 | Suppling and Filling of RBM incl. Dressing, levelling and ramming of same, complete job incl. all carriages. | 344.06 | Cum | - | - | - | - |
| 6.00 | Labour Charges for available filling for inside plinth | 1,318.12 | Cum | - | - | - | - |
| 7.00 | P/Laying in position cement conc. Of specified grade excl. the cost of centering and shuttering. All works up to plinth level 1:4:8 mix. Using crushed aggregates. OPC JEHLUM/ OPC AMBUJA Incld: all Carriage | 329.61 | Cum | - | - | - | - |
| 8.00 | Providing / Laying Reinforced cement conc. In 1:1.5:3 mix excl. cost of centering, shuttering and finishing and reinforcement in 1:1.5:3 using 20mm crushed aggregates. All works upto plinth level. Cement OPC JEHLUM/ OPC AMBUJA/OPC ULTRATECH Incld: all Carriage | 326.86 | Cum | - | - | - | - |
Tender Value
₹6.1 Cr
EMD Value
₹12.2 L
Closing Date
30 Dec 2019, 4:00 pmClosed
Executibve Engineer RnB Division Kulgam
Executibve Engineer RnB Division Kulgam
Construction of 50 bedded integrated Ayush Hospital at Kulgam
2019_PWDJK_88263_1
96/2019-20/RNB/Kul/655-77 D14-12-2019
Open Tender
Civil Works
Item Rate
540 days
Kulgam
Please refer Tender documents.
12 documents required · 12 mandatory
₹8,500
Executive Engineer RnB Division Kulgam
₹12.2 L
Superintending Engineer RnB Circle Ang-Kulgam
24 Jan 2020
16 Dec 2019
31 Dec 2019
16 Dec 2019
30 Dec 2019
16 Dec 2019
23 Dec 2019
Amount
Felling trees of the girth (measured at height of 1 Mtr above ground level ) incld: cutting of trunk and branches, removing of the roots and stacking of serviceable material and disposal of unserviceable material etc complete
Beyond 30 Cm girth upto and incld: 60Cm girth
Beyond 60 Cm girth upto and incld: 120 Cm girth
Engagement of JCB for removing of undulations and surface correction incl. disposal of material as directed.
Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches, drains, pipes and cables etc. (not exceeding 1.5mtr in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5mtr including getting out excavated soil and disposal of surplus soil as directed, within a lead of 50 mtr. All kinds of soil
Providing/Laying stone soling Nallah hand packed on level in foundation trenches . Incld: all carriages complete
Suppling and Filling of RBM incl. Dressing, levelling and ramming of same, complete job incl. all carriages.
Labour Charges for available filling for inside plinth
P/Laying in position cement conc. Of specified grade excl. the cost of centering and shuttering. All works up to plinth level 1:4:8 mix. Using crushed aggregates. OPC JEHLUM/ OPC AMBUJA Incld: all Carriage
Providing / Laying Reinforced cement conc. In 1:1.5:3 mix excl. cost of centering, shuttering and finishing and reinforcement in 1:1.5:3 using 20mm crushed aggregates. All works upto plinth level. Cement OPC JEHLUM/ OPC AMBUJA/OPC ULTRATECH Incld: all Carriage
Providing / Laying cement conc. In 1:2:4 mix excl. cost of centering, shuttering and finishing in 1:1.5:3 using 20mm crushed aggregatCement OPC JEHLUM/ OPC AMBUJA/OPC ULTRATECH Incld: all Carriage
Brick work with F.P.S bricks of class designation 75 in super structure above plinth level up to floor v level in cement mortar 1:6 mix.ion of Ist Class imported wood incld: all carriages
Reinforced cement conc. In walls (any thickness) incl. attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc up to floor v level excl. cost of centering, shuttering and finishing and reinforcement in 1:1.5:3 using 20mm crushed aggregates. ( Cement OPC JEHLUM/ OPC AMBUJA/OPC ULTRATECH incld: all carriages
Reinforcement for RCC work incl. strutting, cutting, bending and placing in position and binding all complete. ( Fe 500 of STEEL SAIL / HIMALAYA PLATINUM )
Centring and shuttering incld: strutting , Propping etc and removal of form work for:-
Foundations/footings
Walls (Any Thickness)
Suspended floor, roofs , landings , balconies etc lintel beams
Columns, Pillars, beams etc
12mm thick cement plaster in cement mortar in 1:6 mix.
Providing and applying white cement based wall putty of required thickness over plastered surface to make the surface even and smooth complete.
Structural steel work welded in built up sections, trusses and framed work, incl. cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. ( SAIL STEEL )
Providing Bottle Green Ribbed Profile sheet of JINDAL / DURASHINE / TATA SHAKTI roofing fixed with polymer coated J or L hooks and nuts 8mm dia with bitumen and G.I limpet washers or with G.S limpet washers filled with white lead and incl. a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto pitch of 60 degrees) excl. the cost of purlins, rafters and trusses, 0.63mm thick with zinc coating not less than 275gm/sqm. Incl. Ridges as per drawingsglass incld. Nails, 20mm beadings etc complete
Finishing walls with water proofing cement paint of required shade (exterior finishing), new work two or more coats. ( Silver Colour )
Making Plinth protection 50mm thick of cement conc. 1:3:6 over 75mm thick dry solling all complete
Providing and Fixing of Ist quality Digital Vitrified Floor tiles ( Wooden shade ) of SOMANY, KAJARIA ( 600mm X 600mm ) or of similar make all complete
Providing / Fixing of Multi Red Granite of standard size and quality of approved manufacturer over 20mm thick cement conc. Base including double moulding wherever required as per directions.
Providing and Fixing of Ist quality Ceramic glazed wall tiles ( Wooden Approved Shade ) of SOMANY, KAJARIA or of similar make all complete
Providing / Fixing of Green Marble of standard size and quality of approved manufacturer over 20mm thick cement conc. Base including double moulding wherever required as per directions.
Providing and Fixing of Chequered Tiles for Ramps of size 30cm X 30cm of SOMANY or KAJARIA
Providing and Fixing of Color Coated Aluminium Frames for partitions, Aluminium Composite Panels (ACP), Glass panes 4mm thick Sheets for Doors, windows, ventilators and partitions with built up standard section of approved make conforming to IS - 173 and IS - 1285 fixed with rawal plugs and screws or fixing with clips incl. fitting up with required PVC. The Aluminium frame section 16 Guage 50mm X 100mm, Almunium Shutter Section 65mm X 45mm must be rust free, straight material and jointed incl. cleats, beading and necssary Hardware Fittings etc. complete job.
Providing and Fixing of Color Coated Aluminium Frames for partitions, Reflective Glass panes 4mm thick Sheets for Doors, windows, ventilators and partitions with built up standard section of approved make conforming to IS - 173 and IS - 1285 fixed with rawal plugs and screws or fixing with clips incl. fitting up with required PVC. The Aluminium frame section 16 Guage 50mm X 100mm, Almunium Shutter Section 65mm X 45mm section must be rust free, straight material and jointed incl. cleats, beading and necssary Hardware Fittings etc. complete job.
Providing and Fixing of Color Coated Aluminium Wire Guage Shutters Almunium Shutter Section 65mm X 45mm for Doors, windows, ventilators and partitions with built up standard section of approved make conforming to IS - 173 and IS - 1285 fixed with rawal plugs and screws or fixing with clips incl. fitting up with required PVC. The Aluminium section must be rust free, straight material and jointed incl. cleats, beading and cost of wire guage etc. complete job.( Incl. Complete Hardware )
Providing and Fixing of Stainless Steel Grill of standard quality and size with Master poles, complete job
Providing and laying of 50mm thick cement concrete flooring/coping in 1:2:4 mix using 20mm nominal size crushed stones, complete job
Providing and fixing in position collapsible steel shutters with vertical channels 20x1 Ox2mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T -iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer
P/L of RR stone masonary 1st class with requisite dimension , uncoarsed of approved quarry in foundation and plinth in dry using bond stones incl. cost and Carriage of material, complete job
providing and Fixing of PVC and G.I Pipe incl. cutting and making walls good with required plaster / concrete ( concealed) with necessary fixtures and other requirements, complete job with all carriages.
15mm G.I Pipe B Class Prakash Surya
20mm G.I Pipe B Class Prakash Surya
50mm PVC Prince make B/C Grade
75mm PVC Prince make B/C Grade
100mm PVC Prince make B/C Grade
150mm PVC Prince make B/C Grade
15mm Union
20mm Union
Tanky Nipple 15mm
Tanky Nipple 20mm
GATE VALVE 20mm
BALL VALVE 15mm
BALL COCK 20mm
DOOR T 100mm
DOOR BEND 100mm
DOOR BEND 75mm
FLOOR TRAP 75mm
P TRAP 100mm
Providing and Fixing of C.P Fittings of approved brand or as directed by Engineer in charge with allied items required complete job with all carriages
BIB COCK
ANGLE VALVE
WALL MIXER
BASIN MIXER
C.P.NIPPLE
SOAP CASE
HEALTH FACET
TOILET PAPER HOLDER
C.P GRATINGS
C.P. TOWEL ROD ( 4' )
TOWEL RING
SINK MIXER
LOOKING MIRROR WITH SHELF ( SUPERIOR QUALITY )
PVC CONNECTION
Providing and Fixing of China ware Fittings / Items of approved make or as Directed by Engineer in charge incl. all necessary fixtures required and dismantelling and making of wall complete wherever required complete job with all carriage
W.C Indian ( Long size )
W.C English type
PVC Flushing cistern
Flushing Bend
WASH BASIN ( Long size )
Pedestal
Providing and Fixing of Triple Layered SINTEX PVC over head water tank & horizontal shape tanks for sump with necessary fittings.
Providing and Fixing of Manhole Cover C.I 18" X 18" Complete job.
Construction of Manhole Chambers Complete with C.I Manhole Cover 18" X 18" incl. excavation, stone soling, PCC (1:4:8), 9" thick Brick Masonary in 1:4 Mix Cement Mortar, 12mm plaster in 1:4 and cement concrete flooring with floating coat of cement and making the surface / slope to dispose the discharge easily. Complete job with all carriage of material having inner size (18" X 18"X 18" )
Providing and Fixing of 50 Litre Electric Geazers Havells/ Jacquar make incl. all necessary fitting/fixtures required.
Providing and Fixing of Approved Brand or as directed by Engineer in Charge 12" X 12" Exhaust Fans with all necessary
Providing of 1.5HP Power Jet Motor ( Crompton make ) incl. all necessary fittings, complete job.
MOHAMMAD AYOUB NAIK
NAZIR AHMAD WANI
SABZAR AHMAD ROY
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.22 MB
BOQ_165462.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .