PROVN OF GREASE TRAP AT VARIOUS MESSES AT VSV GURGAON PROVN OF PCC BASE FOR HF BROADBAND MONOCONE ANTENNA AT NTS GURGAON PROVN OF HARD STANDING TOILET CHARGING ROOM FOR SOLID WASTE MANAGEMENT AT VSV GURGAON AND CONSTRUCTION OF SHED FOR SALVAGE

Amount

B/R WORKS S&F and installation of cold water Grease trap made for separting oil/grease waste from kitchen/ dinning hall waste water & suitable for fixing above or below the GL. The complete grease trap made with stainless steel 2mm thick sheet grade SS304. The grease trap consist with three partations solid waste collection chamber with stainless steel moveable basket madeout with perforated sheet for arresting solid food waste having lifting handle upto top level for easy lifting, oil & grease seprating & collection chamber, treated water collection chamber, inlet, outlet pipes, air/vent pipe, taps, oil indicater etc, oil chamber shall arrengment & connected with container of 5 Ltr capacity with pulling out facility, including conecting to exsisting sewage line complete including all accessories as required to make grease sepration sytem effective & efficent. The over all size of the grease trap shall be 1200mm x 600mm x 900mm, walls made with stainless steel 2 mm thick sheet grade SS-304, with SS openable top cover, odour free when closed and eassy to clean from top complete with connection to kitchen trap and outlet with sewage line complete all as directed by Engr-in-charge. Note:- 1.The Grease Trap shall be procured from the manufacturer of design and shape approved by GE.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level), including removal of rubbish outside MoD land, complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed.

Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land, complete all as specified and as directed

M&L for brick masonry with sub class 'B', old size bricks straight or curved on plan exceeding 6m mean radius, built in Cement Mortar (1:4) complete all as specified and as directed.

All as above item No 5 but built in CM 1:6 etc complete all as specified and as directed

M&L for brick masonry with sub class 'B', old size bricks straight or curved on plan exceeding 6m mean radius in half brick thick walls , built in Cement Mortar (1:4) complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in coping, bed block, mud stops ,kneels, apex stones etc including weathering slightly rounded or chamfered including form work complete all as specified and as directed

All as above item No 8 but precast PCC solid blocks as in kerb stones laid and joine in CM (1:6 ) including necessary earth work complete all as specified and as directed

M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished even fair complete all as specified and as directed

M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified and as directed

M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete wall surface as backing coat of dado/skirting etc complete all as specified and as directed

M&L for 5mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Supply only integral waterproofing compound.

M&L for virified ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15 mm thick in cement mortar 1:6 complete all as specified and as directed.

All as above item No 15 but on vertical surfaces as skirting with 12mm thick backing coat in CM 1:4 inlieu of screed

M&L coloured glazed non skid ceramic tiles 400X400 mm size and 7 to 8 mm thick , in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile over and including screed bed 15 mm thick in cement mortar 1:6,complete all as specified and directed by Engineer-in-Charge.

M&L for Glazed ceramic tiles coloured 300mmx 450mm, 6 to 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match etc on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match etc complete all as specified and directed.

M&L for 75 mm thick, plain cement concrete (1:3:6), type C-2, (using 40 mm graded mechanically crushed stone aggregates), laid in 1:20 slope as in plinth protection including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/ 25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement, complete all as specified and as directed. Note: The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm.

S&F cast iron floor trap, 75 mm dia of out let, ISI marked, with CP grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1,complete all as specified and as directed.

S&F pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with and including back filling PCC (1:3:6), type C-0, complete all as specified and as directed.

S&F factory made flush shutters 35 mm thick, ISI marked, solid core construction, with block board core and plywood face panels, commercial type on both faces, complete all as specified and as directed.

M & L for 35mm thick of 2nd class hard wood plain framed factory made panelled shutters (any number of pannel) with panel of timber flat on both side (feathered edged) or of 12mm thick veneered particle boards with commercial faces vineers. Complete incl fixed to chowkhat the size of rails and styles as per IS 1003 or as described in SSR Part-I kiln seasoned and chemically preassure treated complete all as specified and directed by Engineer-in-Charge.

S&F IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed

S&F Mild steel butt hinges medium weight, cold rolled, 100 mm, ISI marked, complete all as specified and as directed.

S&F stainless steel 100 mm long butt hinges for PVC door shutters and frames complete all as specified and directed by Engineer-in-Charge.

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

S&F 200mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

Supply and fix 150mm size aluminum handle fabricated, 'D' type, anodized ISI marked complete all as specified and as directed.

S&F Double legged Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm.

S&F 300mm long ordinary rat tail rod pattern spring, including roller and roller plate.

S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

Supply and fixing, drapery rod of mild steel 25mm dia, ribbed/fancy type, PVC powder coated, any shade, including set of fixing brackets, for span not exceeding 2m, fixed to wall in repairs, with PVC finols/finnels, connected accessaries, rubber packing, required screws and PVC rawal plugs as required complete all as specified and as directed.

M&L for 2mm thick white wall putty on new/old surfaces of walls & making the surfaces fair and smooth complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint to achieve uniform and smooth surface having no sign of brush marks complete all as specified and as directed.

M&L for preparing plaster surface of wall and applying two coat of exterior weather proof paint over a coat of primer etc complete all as specified and directed.

M &Lfor complete of newly plastered surfaces as of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer to achieve uniform and smooth surface by roller brush having no sign of brush marks complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of 2mm thick wall care putty on wall over a coat of cement primer complete as specified and as directed

M &L for preparation of newly plastered ceiling surfaces and applying three coats of white lime wash to achieve uniform and smooth surface complete all as specified and as directed.

M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

M&L for preparation of new surfaces of steel and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F window / ventilator section of frame 72x55 mm fixed to wall or concrete surface with rowl plugs made, of galvanized steel powder coated and section of shutter 47x20 mm ,mulion section 72x50 mm (Base steel as per IS 513 "D" quality galvanized as per IS 277 with zinc of 120 gms/sqm.) glazed or gauged and wire gauge shutter prepare to receive wire mesh to the shutter(Double door shutter) with total coated thickness of 0.6 mm including grills/guard bars made of square bars powder coated fixed to windows frame with screws at 150mm c/c both ways, 4 to 5 mm thick sheet glass, 0.36mm stainless steel wire cloth with 1.40mm aperture necessory fittings and all builders hardware such as handles, tower bolts & stays etc. complete all as specified and as directed Make:- NCL type-4000 series or equivalent make as approved by GE.

Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed by Engineer-in-Charge .

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Add to (or deduct from) above item No 44 for every 7.50 cm or part thereof above or below 15 cm average depth

Excavation in trenches n exc 1.5 wide and n exc 1.5 m in depth for foundation etc or for laying cable etc n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

All as per above item No 46 but exc 1.5 m and not exc 3 m

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc for shaft wells cess pits manholes, pier holes not exc 10 Sqm on plan in any type of soil and getting out complete all as specified and as directed

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting outin hard/dense soil complete all as specified and directed by Engr-in-Charge.

Returning filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soil complete all as specified and directed by Engr-In- Charge.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting pointcomplete all as specified & directed by Engr -in charge.

Removing excavated material n exc. 250m and not exc 500 m and depositing where directed at a level n exc. 1.5 m above the starting pointcomplete all as specified & directed by Engr -in charge.

Removing excavated material (soil) exc. 1.50 km but n exc. 5 km and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and as directed

M&L for providing plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation and mass concrete complete all as specified and directed by Engr-In- Charge.

S&F rolled sections, MS Angles, MS tubular Structures, MS Channels, Tee, etc. (Fe 410-W Gde-E-250 quality-A)as in main and cross beams, hip and jack rafters, purlins , posts,trusses (framed or unframed) structures where connected to common rafter and running rails and guides for sliding doors, fixed with angles clleats or other connecting plates all as specified. Note:- The work including fixing of MS Members,Trusses at height up to 5.5 m above ground level hence the rates deemend to be included in the rates and nothing extra shall paid

M&L for preparation of new surface of any description and applying two coats of synthetic enamelled paint over a coat of red oxide primer on steel surface over 10cm width or girth complete all as specifed.

S & F pre-painted galvatume aluminium zinc coating GI based corrugated steel 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engineer-in Charge Note:- The work including fixing at height up to 5.5 m above ground level hence the rates deemend to be included in the rates and nothing extra shall paid

M&L for cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting purlin/ rafter of structural steel and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall n.exc half brick complete all as specified and as directed.

M&L for cement concrete (1:2:4), type B2 (using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) bends 110mm bore any radius complete all as specified and as directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.

S&F welded steel wire fabric supplied and fixed complete to wood or steel members weight n.exc 4kg per sqm complete all as specified and as directed

M&L for Cutting into existing manholes for connecting new drains 150mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as requiredcomplete all as specified and as directed

M&L for PCC (1:4:8), type D2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete etc complete all as specified and as directed

M&L for hardcore of gauge n exc. 63mm, with broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed (compected thickness to be measured)

M&L for 75mm thick PCC (1:4:8), type D2 (using 40mm graded crushed stone aggregate) as in sub base of flooring etc complete all as specified and as directed

M&L for 100mm thick PCC (1:4:8), type D2 (using 40mm graded crushed stone aggregate) as in sub base of flooring etc complete all as specified and as directed

M&L for 40mm thick PCC (1:2:4), type B1 (using 20mm graded crushed stone aggregate) as in flooring etc finished even and smooth without using extra cement and spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green including necessary form work if any complete all as specified and as directed

M&L for 60mm thick rubber pressed precast concrete coloured interlocking paver blocks any shape and size pointed with cement and pigment con forming t IS 15658-2006 , M-35 grade complete all as specified and as directed

Supply and filling river sand under the floors and in trenches including spreading levelling and ramming cushioning of LT UG cable complete all as specified and as dirceted..

M&L for forming construction joint 40mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and as directed

M&L cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in bed to drain pipes of 150mm bore including packing under and haunching gainst the sides of pipes after they are laid and rested complete all as specified.

M&L for reinforced cement concrete drain pipes of 150 mm bore class NP-2, laid and jointed complete with collars etc complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns,footing, plinth beam, roof beam, lintels, slabs and other similar structures etc., hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge

M&L for TMT steel bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia. Or securing with clips.

All as per item No 76 but 5mm dia and over upto and inclluding 10mm dia in stirrups, spacers and binders etc complete all as specified and directed by Engineer-in-Charge

M&L for Pre-Cast reinforced cement concrete 1:2:4 type B-1 with using 20 mm graded stone aggregates as in cover slabs (for manholes etc)chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plan faces set in cement mortar (1:4) including necessary use and waste form work etc complete all as specified and directed Note - Reinforcement shall be measured and paid separately

S&F framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk way railing, frame work of watertanks and similar work confiming to Fe.290, Gde E-165 etc complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe up to 150 mm internal dia of pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed

Construction of septic tanks, excavation in soft/loose soil, foundation In PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc., complete for 50 users complete all as shown on drgs, specified and directed by Engr-in-charge.

Construction of soakage wells of size 1.8 M dia X 4.50 M effective depth, including excavation in soft/loose soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 nominal mix concrete including intercepting chamber and screen chamber made of Brick masonary in CM 1:4, RCC cover slab in M25 nominal mix interconnecting pipes of RCC, complete filled with brick bats, complete all as shown on drgs, specified and directed.

Use and waste of form work to sides of concrete , foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work for rough finished surface complete all as specified and directed by Engineer-in-Charge.

Use and waste of form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings , opening in concrete walls, floors and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm etc.for fair finished surface complete all as specified and directed by Engineer-in-Charge.

Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions Suqare, rectangular fair finished surface.

M & L for Reinforced Cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concrete etc complete all as specified and directed by Engineer-in-Charge.

M&L for reinforced Cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in columns, pillars, piers, posts and struts

M & L for spreading and levelling excavated earth in layers n exc.25 cm thick and well ramming including watering as required complete all as specified and directed by Engineer-in-Charge

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed

S & F solid PVC door frame of size 50mm x 95mm made out of 5 mm single side prelam PVC sheet wood grain printed PVC sheet reinforced with Ms Squre Tube in opening etc complete all as specified and as directed

S&F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side Prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement including rawl plugs etc in the frame at site as per specification & drawing etc complete all as specified as directed.

S&F in repair vitreous China Squatting pan 'Orrisa' pattren size 580x440mm white with integral foot rest, 'P' or 'S" trap cement concrete bedding complete all as specified and directed.

Supply only 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve float, handle including bracket complete all as specified and directed with glaged finish.

S&F Vitreous China half stallUrinal flat back CAT PART No 60010 of HINDWARE or equivalent as approved White including CP waste coupling and waste pipe and spreader complete all as specified and as directed by Engr-in-charge

S&F in vitreous China wash basin white, flat back size 550x400mm including S&F 32mm dia waste coupling, waste PVC pipe complete all as specified and as directed..

S&F 15mm bore Pillar taps fancy type, cast copper alloy, with long swan neck, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed.

S&F PVC connection of 45 cm length including brass nuts complete all as specified and as directed

S&F tubular towel rail 20mm dia type brass chromium plated 600mm long between flanges complete all as specified and as directed

S&F tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and as directed

S&F in repairs Bib taps, cast copper alloy chromium plated, fancy type with crutch or butterfly handle , screwed down , scrwed for iron pipe or for brass ferrule and fixed for 15 mm dia bore dia pipe complete all as specified and as directed.

S&F 15mm dia stop valves/angle valve/concealed stop cock cast copper alloy chromium plated brass,fancy type, high pressure with crutch or butterfly handle screwed down complete all as specified and as directed by Engr-in-charge

S&F 500 litres capacity Rotational moulded polythylene water storage tanks (cylinderical vertical with close top) hoisted and fixed in position including 20mm size ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and tank nipple complete all as specified and as directed by Engr-in-charge.

S & F 20mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge

M & L 15mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and directed by Engineer-in-Charge.

M & L 20mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and directed by Engineer-in-Charge.

S & F for 100 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls complete all as specified and directed by Engineer-in-Charge

S & F for 75 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls complete all as specified and directed by Engineer-in-Charge

S & F for 50 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls 50 mm bore but fixed to walls including necessry GI stack clamps complete all as specified and directed by Engineer-in-Charge

S & F cast iron cowls of 50 mm size complete all as specified and directed by Engineer-in-Charge

S & F for 100 mm bore cast iron bends/tee/reducers of (any radius), dimnishing piecs or taper (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer-in-Charge

S & F for 100 mm bore cast iron branch piece , single (equal or unequal) ordinay or inverted (spigot or socket type ) or with parallel branches complete all as specified and directed by Engineer-in-Charge

S & F for 75 mm bore cast iron bends/tee/reducers of (any radius), dimnishing piecs or taper (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer-in-Charge

S & F gully trap 125/110mm, setting & jointing with solvent cement including mild steel cover complete all as specified and directed by Engineer-in-Charge

S&F MS joist channel , angle or Tee section MS tubes, plates, purlins posts, rafters etc. fixed indepently or framed with or without connecting plates confirming to Grade Fe 410-0 or Fe-310-0 including making special shape as required complete all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws including special shape complete all as specified and directed by Engr-in-Charge

S&F Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S&F expended steel wire fabric with steel member weight exc 4 kg/sqm etc complete all as specified and directed by Engineer- in - Charge

M&L for 150mm thick Cement concrete type D-2 , 1:4:8 (40 mm graded aggregate) as in sub base of floors.

M&L for 150mm thick Cement concrete type B-1, 1:2:4 (20 mm graded aggregate) as in floor Finishing cement concrete surface even and smooth without using extra cement.

E/M WORKS Supply, laying and testing in replacement of cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 Volts grade cross sectional area 4 core x 16 Sqmm. complete all as directed. Note : Provision of suitable double crimpped lugs and glands shall deemed to be included in quoted rates.

S/F Submain wiring alongwith earth wire with the FRLSH PVC insulated copper conductor, single core cable in PVC conduit 2 x 4.0 sqmm + 1 x 1.5 sqmm earth wire

S/F Rigid non metallic conduit inclusive of wall tees, Bends, elboews, Reducers, bell mouth, tube ends fixing accessories such as couplers, lock nut, saddlers, pipe hooks etc.

M&L for sub class ‘B’ bricks old size laid flat dry in trenches over cable, across the direction of cable complete all as specified & directed .

S&F DB SPN 12 way IP 43, IK-09 with metal door, Nos of module 12, Cat Part No-507612 Make : Legrand or equivalent in CG, L&T, Siemens & Havells

S&FMCB Double Pole 415 V B Curve, 40 Amps rating Cat Part No 408637 Make : Legrand equivalent in CG, L&T, Siemens & Havells

S&F MCB Four Pole 415 V, B Curve, 100 Amp rating Cat Part No 408702 Make : Legrand equivalent in CG, L&T, Siemens & Havells

S&FMCB SP 6-32 Amp 'B' Curve, 240/410 Cat Part No 408595 Make : Legrand equivalent in CG, L&T, Siemens & Havells

M&L for point wiring complete with stranded copper conductor 1.5 Sqmm size (Nominal area) PVC insulated unsheathed FRLSH Grade cable 1100 volts grade confirming to IS: 694 drawn in and including heavy duty PVC concealed pipe confirming to ISI marked not less than 25mm dia including single core stranded copper conductor 1.5 mm Sqmm PVC insulated unsheathed FRLSH cable as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete all as specified for one light point controlled by oneway switch 5 Amp Note :- Rates are deemed to be included for cutting of chases for conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.

S&F switch piano, flush type single pole, oneway, 5 Amps, 240 Volts as specified and directed

S&Fcelling roses PVC/Polycarbonate 3 terminal isolated body all as specified and directed

S&F in replacement of 20 watt (4 ft long) decorative box type filling with blue colored end caps for LED tube etc complete with all accessories internally pre-wired and includind connection up with twin core twisted flexible copper conductor cable from celling rose to terminal block and testing copmlete

AC WORKS S&F Air cooled split unit Air Conditioner Electric driven, single phase of capacity 1.5 TR, BEE 5 Star rated

S&F voltage stabilizer for automatic operator, single phase naturally air cooled indoor type and designed for input variatant between 170 V to 250 V + 2.5 % of capacity 4 KVA

RACON CONSTRUCTION

Shakashi Construction Co.

M/S ujjwal associates

M/S Sharan Kumar