CERTAIN REPAIR TO PLASTER, JOINERY, FLOORING ETC AT CMVL, 32 MVH, FASF UNDER AGE BR II OF GE NORTH MEERUT CANTT

Amount

M&L for providing cement concrete 1:2:4 Type B 1 (using 20 mm graded crushed stone aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs hold fast water troughs, filling in pressed steel door frame and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed.

M&L for providing reinforced cement concrete 1:2:4 (nominal mix) type BO (using 12.5mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

All as per Srl item No 03 here-in-before but except bricks. Note : Old bricks retrieved from demolition of brick work shall be re-used.

S&F glazed, gauzed and skeleton shutters 35 mm thick 2nd class hardwood (SAL/ CHAMP / HOLLOCK) open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); for doors and fitted to chowkats complete all as specified and directed.

S&F plain, framed, panelled shutters (any number of panels), of 2nd class Hardwood (HOLLOCK / CHAMP / SAL) 35mm thick with panels of timber flaton both sides (feather edges), or of veneered particle board medium density, wood particle board with commercial face veneers; and fitted to chowkats complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood facepanels, commercial type on both sides, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exc. 1.5 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) exc 1.5 sqm but not exc. 4 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Taking down and refixing in the same opening PVC doors by making edging etc complete all as specified and directed

Taking down shutters of any description exc 1 but n exc 2 sqm each, including builders hard ware fittings complete all as specified and directed.

M&L for second class hard wood as in purlins, rafter etc complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing on srl page No 156 of SSR Part-II complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing shown on page 160 of SSR Part-II complete all as specified and directed.

S&F anodised aluminium frame for doors , windows, ventilators with one or more rebates with and including weight of joining cleat for fixing etc complete all as specified and directed

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m with and including necessary joining aluminium cleats, aluminium glazing clips, ruber neoprene packing suitable size of aluminium, handles of size 150mm 2 Nos in each door, stainless steel hinges anodised aluminium snap beading for fixing glass panes / other filling material in panels, screws etc complete all as specified and directed. Note:- Glass panes / other filling materials in panels shall be measured and paid separately.

Supplied and fixed anodised aluminium window and ventilator with side hung shutters without sash bars aluminium section weighing 0.55 kg/RM with and including, necessary jointing cleat, glazing,clip, rubber packing,,anodised aluminium snap beading, screws anodised aluminium fittings such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 no) suitable handle (1 no) complete all as specified and directed.

Supplied and fixed steel windows with pressed steel frame made out from 1.25 mm thick steel with one or more rebate with glazed shutters and fly proofing shutters including guard bars, hinges, peg stay , handles tower bolts lugs including treated with tar or coal tar black paint on steel surfaces in contact / embedded in concrete / masonry work complete all as specified and shown on drawings (Note : Disturbed surface of wall shall be made good to true surface)

S&F in repair aluminium (extruded section body) door closer hydraulically regulated, designation No 3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor, over all length of cover plate 150mm complete all as specified and directed.

S&F 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt having shoot / dia of bolt not less than 10mm complete all as specified and directed.

S&F in repair 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt having shoot / dia of bolt not less than 10mm complete all as specified and directed.

S&F PTMT tower bolt 200mm size fixed with machine screws complete all as specified and directed Make : Symit

S&F PTMT bow handle 150mm size fixed with machine screws complete all as specified and directed Make : Symit

S&F 250 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

S&F stainless steel butt hinges of 100 mm size, complete all as specified and directed.

S&F Butt hinges of 100 mm size, Medium weight, cold rolled mild steel and fixed, complete all as specified and directed.

S&F in repair Butt hinges of 100 mm size, Medium weight, cold rolled mild steel and fixed, complete all as specified and directed.

S&F 125mm size Mild steel pressed handles, oval type, stove enamelled black, complete all as specified and directed.

S&F in repair 125mm size Mild steel pressed handles, oval type, stove enamelled black, complete all as specified and directed.

S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless steel wire staples including necessary beadings complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and directed.

S&F mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), clamps; hold fasts; wall ties; hooks for hanging fans, small articles including necessary riveting and / or welding conforming to Fe 290 (Gde-E 165) complete all as specified and directed.

M&L for mild steel TMT bars 6mm to 8mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

S&F rolled mild steel in rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

Supplied and fixed mild steel work as in door frame chowkhat including all necessary cutting drilling,bolting or revetting or welding etc and similar work confirming to Fe 290 (Gde E 165) complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges,. Steel peg stay and including treated with tar or coal tar black paint on steel surfaces in contact / embedded in concrete / masonary work complete all as specified and directed. (Note : Disturbed surface of wall shall be made to good to tune surface)

Dismantling of aluminium snap grid frame work in false ceiling complete all as directed.

Supplied and fixed 6 mm thick Non-asbestos cement corrugated or semi corrugated sheets roof covering fixed with J-type or cranked hook bolts in roofing complete all as specified and directed.

M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg / sqm including cleaning the surface complete all as specified and directed

M&L for bitumastic gola, with 80/25 bitumen and coarse snad mixture 1:3 by weight 8cm x 8cm at the junction of roofing to vertical surfaces complete all as specified and directed

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding / ridge to wall, fixed with self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

Supplied and fixed Tee grid suspension system of size 600 mm x600 mm type-1 made out of rolled framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm ,main runner shall be 0.3 mm thick of section 24 mmX33 mm cross runner 0.3 mm thickof section 24 mmx25 mm,wall angle shall be 0.63 mm thick of section 24 mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod ,system exposed portion shall be pre painted polyster coated in off white/white in colour complete with material,fixing, jointing etc all as per manufactures instructions and directed. ( Make:- METROC or METACIL or any other equivalent make as approved by GE.

Supplied and fixed fibre cement coloured textured designer ceiling board 4mm thick of size 595x595 mm conforming to IS : 14862 & IS : 2380 Part-XIV fixed to timber / GI / Aluminium frame work with screws/clips complete all as per manufactures instructions and as directed. Make : Everest, Charminar, UPAL.

M&L for 16-20 mm thick kota stone in flooring of size 580 x 580mm mirror polished laid and jointed with grey cement and pigment to match the colour of the slab including cutting, rubbing and polishing complete all as specified and directed

M&L for 16-20 mm thick machine cut Kota stone on vertical surfaces, such as skirting / dado etc set& jointed in neat cement slurry and pointed in coloured cement to match including rubbing and mirror polishing complete all as specified and directed.

M&L for providing coloured designer tiling exterior grade (ENDURA or equivalent as approved by GE) 10-12 mm thick set, jointed & pointed in neat cement slurry with gray cement and pigment to match shade / colour / matrix of tiles in floors complete all as specified and directed.

M & L for laying Non Skid ceramic tiles 7 to 8 mm thick, (square / rectangular) jointless area of each tile exc 0.11sqm but n.exc 0.18 sqm first quality coloured of grade B II (a) /B II (b) and of abrasion resistance - PE I -III or above , in floors etc, set in neat cement slurry over CM screed (screed shall be measured and paid for separately under respective item) complete all as specified and directed".

M & L for light shade vitrified tiles 10 to 12 mm thick (square / rectangular) polished, area of each tile exceeding 0.36 sqm but n exc 0.42 sqm , first quality , as in floors etc, set in neat cement slurry over CM screed (screed shall be measured and paid for separately under respective item), complete all as specified and directed".

M & L for light shade vitrified tiles 10 to 12 mm thick (square / rectangular) polished, area of each tile exceeding 0.36 sqm but n exc 0.42 sqm , first quality , on vertical surfaces skirting / vertical surface of wall etc, set in neat cement slurry over CM screed (screed shall be measured and paid for separately under respective item), complete all as specified and directed".

M&L for Glazed ceramic tiles coloured 300mmx 450mm X 7 mm thick first quality of grade B tiles on vertical surface such as skirting / dados etc set in neat cement slurry over and including 15mm th screed bed in CM (1:4) and incl roughning surfaces of old concrete floor etc complete all as specified and and directed

M&L for granite (of any type) slab 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and making suitable hole for gas pipe complete all as specified and directed.

M&L for PCC 1:1.5:3 type A-1, 100mm thick flooring (PCC procured through RMC plant) laid in altenate bays and finish even and smooth without using extra cement including making impressin with 12mm dia round bars in diagonal pattern of size 150 x 150mm whilest concrete is green complete all as specified and directed. Note :- Rate will be deemed in this item including of form work and making diagonal impression by 12mm plain bar.

M&L for 75mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in floor/plinth protection , finish even & smooth without using extra cement complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

Dismantling of floor, hearth or wall tiles / terrazzo including cement mortar bedding (but not backing),removal servicable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 50mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed. Make : NITCO, Mumbai ; Redsun tiles & Pavers, panchkula ; Star Tiles & Industries, Rama Devi, Kanpur ; Mayur tiles & Interlocking Pavers, Lucknow ; Mehatab tiles, indore ; Tulip Infrastructure, Saharanpur (U.P)

M&L in repair for laying 80 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-40 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 50mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed. Make : NITCO, Mumbai ; Redsun tiles & Pavers, panchkula ; Star Tiles & Industries, Rama Devi, Kanpur ; Mayur tiles & Interlocking Pavers, Lucknow ; Mehatab tiles, indore ; Tulip Infrastructure, Saharanpur (U.P)

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for backing coat 10 mm thick in cement mortar 1:4 on vertical surfaces complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on brick or concrete surfaces or on outer and inner surfaces of fuding manger, finished even and fiar without using extra cement complete all as specified and directed.

M&L for cement plaster 15mm thick in cement mortar 1:3 in chajjas / beam / ceiling etc with X PM if required to make up to original shape at any height complete all as specified and directed

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L neeru finish to plaster all as specified and directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and directed.

M&L for preparing the new plastered surfaces and applying three coats of white lime washing on walls complete all as specified and direcrted.

M&L for three coats of white wash on undecorated surfaces or unplastered surfaces of ceiling including preparation of surface complete all as specified and directed.

M&L for preparing of old decorated surfaces of walls ( plastered or un plastered ) including cornices etc and applying one coat of oil bound distemper, complete all as specified and directed

M&L for prepration of old surfaces of wall including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc (Plastered or un plastered surfaces) and applying one coat of white (lime) wash complete all as specified and directed

Complete removal of all existing treatment like white wash, colour wash, cement base paint, oil bound distemper etc from old decorated wall by scratching with MS patties, scrubbing down with sand paper and washing the surfaces to remove all existing treatment and spots complete all as specified and directed

M&L for prepration of old decorated surfaces of walls incl, scraping down smoke soot, moulds, moss & efflorescent salts & Trading oil and greesing spots etc & applying two coats of exterior emulsion paint over a coat of wall primer and over a coat of exterior grade wall putty to obtain smooth surface of wall including complete removal of existing treatment complete all as per manufacturers instructions.

M&L preparing new plastered surfaces of wall and applying two coatsacrylic emulsion paint in comouflage (pattern and colour combination as approved by GE) painting complete all as specified and directed

M&L for 3mm thick wall care putty as on wall including hacking out of old decorated surfaces of walls complete all as specified and directed

M&L for prepration of old decorated surfaces of walls incl, scraping down smoke soot, moulds, moss & efflorescent salts & Trading oil and greesing spots etc & applying one coat of exterior emulsion paint as per manufacturers instructions

M&L prepration of old decorated surfaces of walls and applying two coats acrylic emulsion paint in camouflage (pattern and colour combination as approved by GE) painting complete all as specified and directed

M&L prepration of old decorated surfaces of walls and applying one coat acrylic emulsion paint in camouflage (pattern and colour combination as approved by GE) painting complete all as specified and directed

M&L for taking down heavy duty steel gate from magzines care fully area of each leaf exc 5 sqm and weght of each leaf appx 550 kg and refixing in the same opening by repair / replacement of pintel hinges, sliding roller, necessary guiding rails, etc all as specified and directed by Engineer-in-Charge

M&L for preparing of old decorated surfaces of walls (plastered or un plastered) including cornices etc and applying one coat of cement base paint complete all as specified and directed

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying two coats of white / tinted synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces (complete removal of existing treatment) of any description not otherwise described over 10 in cm width or girth and applying two coats of white / tinted synthetic enamel paint complete all as specified and directed .

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of old painted steel surface (complete removal of existing treatment) of any description over 10 cm in width or girth and applying two coats of white / tinted synthetic enamel paint complete all as specified and directed

M&L for 3 mm thick sheet glass, ordinary quality and glazing with oil putty or glazing pins in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for 4.80 mm thick sheet glass, ordinary quality and glazing with oil putty or glazing pins in square exc 0.5 sq. m in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and directed.

Taking up or down GI water tubing 15mm bore and connection including cleaning serviceable pipes for refixing and unserviceable removal from the site complete all as secified and directed

Taking up or down GI water tubing 20mm bore and connection including cleaning serviceable pipes for refixing and unserviceable removal from the site complete all as secified and directed

Supplied and fixed GI water tubing 15 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Supplied and fixed GI water tubing 20 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

M&L in repair for 1mm thick MS plain sheet for making modified lid of water tank and fixed with 04 nuts and bolts for water tanks for water capacity n.exc 750 ltr complete all as specified and directed

S&F for repair 32mm dia urinal waste pipe plain size 50 x 800 mm complete all as specified and directed

S&F for repair waste pipe including 40mmdia cup of size 32 x 800mm complete all as specified and directed

Dismantling of old water tank exc 250 Ltrs & n.exc 500 Ltrs capacity and Supplied, hoisted and fixed inposition rotational moulded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm dia with brass float valve assembly complete all as specified and directed.

Dismantling of old water tank exc 500 Ltrs & n.exc 1000 Ltrs capacity and Supplied, hoisted and fixed inposition rotational moulded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 1000 Ltrs capacity with and including 20mm dia with brass float valve assembly complete all as specified and directed.

Cleaning of water tanks of capacity exceeding 500 ltr and not exceeding 1000 ltr by removing all scale and dirt, etc from tanks and from mouth of circulating pipes etc complete all as specified and directed

S&F in repairs 15mm bore dia Ball valve high pressure of PTMT with epoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 142 gms complete all as specified and directed.

S&F in repairs bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore long body, fancy type and fixed complete all as specified and directed.

Supplied & fixed stop valves, 15mm bore dia cast copper alloy, fancy type, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supplied & fixed stop valves, 20 mm bore dia, cast copper alloy, fancy type, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F in repair stop valve of PTMT any colour high pressure screwed for iron pipe of 15 mm bore and fixed. (Minimum weight 15mm- 90gms/20mm-92gms) complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified and directed. complete all as specified and directed.

S&F for PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed

S&F for 75 PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed

Supplied and fixed in repairs vitreous china WHB, white, flat back size 550x400mm including cutting for and pinning in ends of bracket or erecting stand with and including angle iron brackets, duly painted with two coats of synthetic enamel paint over one coat red oxide zinc chrome primer cast copper alloy capastan head C.P brass pillar tap fency type 01 No 15mm bore, CP brass waste coupling 32mm dia, PVC waste pipe 32mm dia and PVC connection 450mm long high pressure with PTMT nut complete all as specified & directed.

Taking down wash hand basin alongwith connected fittings and refixing in the same location.

S&F in repair chromium plated fancy type pillar tap 15 mm dia complete all as specified and directed.

Supply and fixing vitreous china squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern including provn of lime concrete bedding and making connection with & including PVC P Trap, etc including breaking up existing demaged WC seat and connecting flush pipe etc and make good to floor complete all as specified and directed.

Supply and fixing in repairs PVC low level flushing cistern of 10 Ltr capacity syphonic action type with inlet ball valve, float and handle including PVC brackets for mounting of cistern complete all as specified and directed.

Taking down PVC low level flushing cistern and refixing in the same location

S&F in repair PVC flushing cistern float valve complete all as specified and directed

Supplied and fixed in repair 125 mm size brass chormium plated shower roses with or without swivel joints including fixing to steel pipe or union 15mm bore complete all as specified and directed.

S&F in repair kitchen sink made of stainless steel 1mm thick with plugs, washers and waste cinlduing bedding in cement mortar over all size 495 mm x 420 mm bowl size 410 mm x 330mm x 160mm including waste coupling waste coupling and waste pipe complete all as specified and directed

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and directed.

Demolition of cement concrete in ground floors and paving n.exc 15cm thickness(below or above ground level) and including removal of debris & rubbish from the site complete all as specified and directed. Note : Stone slabs / tiles and hard core of any description shall not be measured & paid under this item.

Dismantling of timber scantling framed work 40sqcm and over in section in any position complete all as specified and directed.

Dismantling AC sheet corrugated or semi corrugated sheet of any description as in roof and including removal from the site complete all as specified and directed.

Dismantling of wall or ceiling board (fiber,pulp,insulation etc) any thickness and removal from the site complete all as specified and directed.

S&F in repairs steel window peg stays 300mm long with screws complete all as specified and directed.

S&F in repairs for mild steel window handles left / right with screws complete all as specified and directed.

S&F PVC Bath cabinet with mirror 18" x 22" x 4.25". Make : commander, Prayag or equivalent

M/S AMAR ELEKTRO CENTRE

SA construction co.

High Tech Metal India

veer enterprises