Repairing of Gates and Gearing system, Hoisting structure and Painting of Gate No. 15-21 to Stop Leakage of Hussainiwala Head Works

Amount

Providing and fixing Trolley Plates size 4440x150x20 mm

Providing and fixing Roller Outer dia = 138 mm & Length = 171.5 mm

Providing and fixing Roller Pin of dia 45 mm & Length of 246.5 mm

Providing and fixing G.M Bush Outer dia 42.5 mm, inner dia 31.8mm & length 171.5 mm

Providing and fixing of trolly plate Stud

Providing and fixing Guide Plate of Trolly Plate

Supply and Installation of New steel wire Rope in Position including linking gates and hoist mechanism complete in all respect.10-20mm dia

Providing and fixing Side Bulb Rubber Seal 120/44 mm

Providing and fixing Bottom Flat /Wedge Rubber Seal 120x20 mm

Providing and fixing Side Seal clamp plate M.S Flat 65x8 mm CR No. 56

Providing and fixing Bottom clamp Seal plate M.S Flat 100x10 mm

Providing and fixing Vertical Stiffener ISMC 125x65

Painting two or more coat with Anti corrosive bitumastic paint to give an even shade (CSR Item No. 16.27) @Rs. 54.00 + 5.35% = Rs. 56.89/Sqm

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. (CSR Item No. 16.17) @Rs. 66.00 + 5.35% = Rs. 69.53/Sqm

Scrapping, brushing to remove paint to bare metal surface (CSR Item No. 16.36) @Rs. 101.00 + 5.35% = Rs. 106.40/Sqm

Filling cement bags with sand, sewing and laying in position with in 30 mtrs in water i/c cost of EC bags and strings. CSR Item No. 23.27 Rs. 22.00 + 5.35% = Rs. 23.18/each

Supply of Mazdoor for removal or Ring Bundh/ for clearing the silt which was deposit in front of gates

Proving and fixing Grease Nipple as per site condition.CR.27

Painting new letters & Figures of Black synthetic enamel paint to an even shade with ordinary qulity paint. (CSR Item No. 16.47) @Rs. 2.64 + 5.35% = Rs. 2.78/cm height/letter

Removing providing and fixing chequered plate 8mm

Fixing and Holding the gate with the help of 35 tonne capacity crane.CSR 2.13

Fillet Welding with high strength steel rods, complete in all respects and to entire satisfaction of engineer in charge 12mm wide

Providing and applying injection grouting using cement slurry admixed with Fosroc Chemical Conplast WL or any other equivalent compound @ 300 ml/ Bag of cement through the uPVC nozzles ( 12mm dia uPVC/ Plastic Nozzles- 4" to 9" long @ 5 No: / Sqm of area) , provided into the cracks/ honeycombed areas using 140 PSI hand operated Grouting Pump under pressure till the refusal,doing final Cement slurry Grouting (after 28 Days),, finally cutting & sealing of Nozzle. including all labour, supervision, tools and tackles and transportation etc. complete as per direction of Enginner -in- charge.CSR 13.94

Any Other Item

JAGIR SINGH CONTRACTOR (BID ID -637057)

S.K SOOD (BID ID -635630)