Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.4 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹45.1 L+₹1.8 L (4.13%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹48.9 L+₹5.6 L (12.9%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 | |
| 4 | L4₹50.0 L+₹6.7 L (15.4%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 | |
| 5 | L5₹51.8 L+₹8.5 L (19.6%)Rejected-Finance | L5 | Rejected-Finance Being other than L1 |
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
14 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 862 EWS
GE 862 EWS PIN 913862 c/o 56 APO
Repair/replacement of boundary walls, chain link fencing, retaining walls and other connected items in Zone A under AOR of AGE B/R Dett B of GE 862 EWS.
2022_MES_518528_1
GER-06/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE 862 EWS
As per tender documents
9 documents required · 9 mandatory
₹500
GE 862 EWS
₹1 L
Yes
10 Jun 2022
18 Apr 2022
16 May 2022
18 Apr 2022
14 May 2022
2 May 2022
60 days
Amount
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed.
M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.
M&L for brick work with sub class 'B' bricks,(except bricks, using old unserviceable brick after cleaning), old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.
M&L for stone walling of random rubble masonry, uncoursed, well bonded, bedded and soilidly hearted, built in cement mortar (1:6), complete all as specified and directed.
M&L for stone walling of random rubble masonry (except stones, using old unserviceable stone after cleaning), uncoursed, well bonded, bedded and soilidly hearted, built in cement mortar (1:6), complete all as specified and directed.
M&L for extra over stone walling of any type of stone for hammer dressing to face stones and dressing of face beds with maximum depression on face from straight edge held against the dressed surface n exc 40 mm and joints, as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and directed.
M&L for hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level using brocken stone or boulders complete all as specified and directed.
M&L for PCC type B-1, 1:2:4 (using 20mm graded aggregate) as in coping, benching, hold fast, water troughs, bed block and the like including weathering, slightly rounded or chamfered angle and throating including necessary form work complete all as specified and directed
M&L for PCC type D-2 (1:4:8), (using 40 mm graded stone aggregates) in foundation, filling and mass concrete complete all as specified and directed.
M&L for use & waste of formwork to sides of pillars, posts, struts, pieras, columns and stanchions square or rectangular in section, in rough finished flat surface of concrete complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality comfarming to Fe-410-W as in columns complete all as specified and directed.
M&L for mild steel TMT bars 5mm to 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends as in stirrups, spacers and binders including binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality comfarming to Fe-410-W complete all as specified and directed.
M&L for demolition of cement concrete of any description and in any position not otherwise specifically provided for as in louvers, jallied complete all as specified and directed.
M&L for 25mm thick precast cement concrete louvers and jallies 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) set in cement mortar (1:4) including all moulding but exc frames complete all specified and directed.(Note- Pattern of jallies shall be as approved by GE).
M&L for reinforced cement concrete M-25 (design mix) (20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns and the like complete all as specified and directed
M&L for reinforced cement concrete M-25 (design mix) (20mm graded stone aggregate) as in walls, retaining walls, basement walls, ballast walls and the like complete all as specified and directed
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick on concrete/brick surface on wall in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 20 mm thick on stone surface on wall in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over and including a coat of alkali resistand primer complete all as specified and directed.
M&L for preparation of old plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed by GE.
M&L for Preparation newly plastered surface and applying two coats of exterior weather coat paint of Apex Ultima of Asian or equivalent make in camouflage of two or more colours pattern over and including a coat of primer complete all as specified and directed.
M&L for Complete removal of existing treatment on wall/roof surface including cornices and chajjas etc and applying two coats of exterior weather coat paint of Apex Ultima of Asian or equivalent make over and including a coat of primer complete all as specified and directed.
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground as post embedded in concrete, brick work, masonry work etc complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing surplus soil to a distance n exc 50m and making good surface in any type of soil complete all as specified and directed.
S&F for angle iron posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. (Note :- Size of angle shall be as per standard drgs).
M&L for PCC type C2 (1:3:6), using 40 mm graded stone aggregates as in sub base, foundation filling and mass concrete of post complete all as specified and directed.
M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F for galvanised iron chain link fencing with 3.8mm to 4mm dia wire mesh size 75 X 75 x 3mm (as per sample approved by GE) after dismantling of old unserviceble chainlink fencing of any type complete all as specified and directed.
S&F for mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other with washers of length exc 10 to 15mm and n exc 5 cm after taking down of old nuts and bolts complete all as specified and directed.
S&F for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line of wire to be measured) after dismantling of old unserviceble barbed wire complete all as specified and directed.
S&F for concertina coil 1050 mm dia, 56 loops, 2.5mm core wire heavy galvanised (wire-275 GSM & strip-200 GSM), tensile strength of wire 1400-1500 N/Sqmm, weight 14.63 Kg/coil, stretchable length 12M inlcuding securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc after dismantling of old concertina coil of any type complete all as specified and directed.
S&F for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and also fastening conforming to Fe-290 Gde E-165 after taking down of old mild steel frame work of any type and any locations complete all as specified and directed.
Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m depth for laying of cable and foundation of poles and stays and n. exc 10sqm on plan and getting out in soft/loose soil complete all as specified and as directed.
Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.
M/S SV CONSTRUCTIONS
SUBASH CHANDER
M/S BADRI NATH GUPTA
RAJINDER CHOUDHARY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .