Establishment of Kalaignar Centenary Park at Dr.Radhakrishnan Road in Chennai

Amount

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Providing Pre - construction Anti - termite treatment and creating a chemical barrier to the building by injecting chemical emulsion of required concentration under grade slab and grade beam, all round the Pile Caps, Catch basins, trenches, pits, tunnels, wall trenches, back fill, plinth filling, junction of wall and floor. External perimeter of building, surrounding of pipes, expansion joints, below U.G. sump and retaining/side walls etc. as per instructions of chemical manufacturer as directed by the Department officer/ Architect. The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 or equivalent BS specification. The chemical to be used as insecticide for the treatment shall be Biflex Tc, TC stands for Termiticide Concentrate for Termite Control (Bifenthrin) and the application shall be diluted 1 part of chemical Biflex Tc with 49 parts of water to get 0.05% emulsion and strictly in accordance with the manufacturer’s specification.Including cost of chemicals labour charges,transport and storing etc complete and as directed by the department officers

Supplying and filling in foundation, basement, etc with filling M-sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:4:8 (One Cement, Four sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Providing and Laying M 25 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Raft, Grade beam, Shear wall, RCC walls, Lift walls, Plinth beams, Column, footings, Grade slab, Roof slab & beam, Curved slab, beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box binders basement retaining wall, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. Rate to include all leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, curing etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer- in-charge

Upto Basement

b)First Floor

Supplying and erecting steel centering sides and soffits including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm center to center or at suitable intervals, etc. complete in all floors complying with standard specification. (Payment for centering shall be given after the concrete is laid)

b) Centering column footings, column pedestals, plinth beams, grade beams, staircase steps, etc.

c) For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCCSlab, etc.

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

For constructing special scaffoldings for a 16m high glasshouse with an Built up area of 520 sqm, use high-strength steel scaffolding systems compliant with IS 2750:1964 standards. Ensure the scaffolding is designed to support the specific load requirements of glass panels and glazing equipment. Equip the structure with adjustable base plates for stability and secure it with diagonal bracing. Install guardrails, toe boards, and access ladders for worker safety, and include non-slip platforms. Regularly inspect the scaffolding for stability and wear, adhering to local safety regulations and manufacturer guidelines. Ensure the scaffolding covers the entire 520 sqm Built up area effectively.

Supplying ,fabricating and placing the arch type truss of required span using the MS Hollow section for given detail, rafter and tie as per design drawing given by the depart mental officers including cutting the beam required size with the aid of gas cutting machine and welding rigidly with aid of 10 guage electrode grinding smoothy and with 25 x 6 mm flat and labour for fabrication and prtty iron works and fixing the purlin cleat etc conveying the materials to the site and erecting the same to height of 10 m from ground level and finally painting two coats of SEP over primer etc complete complying with standard specification and as directed by the departmental officers at site of work.

Supply and laying of pebble pathway Including Earthwork,foundation and concrete all Necessary civil work and material ,Transporation,labour charges,Neatly finshing , Etc.,Complete complying with standard specification

Supplying high end Holographic Display system with high brightness (6 feet) and Story boarding and creating Holographic immersive visuals as per approved by the department in Panoramic aspect ratio using CGI, timelapse footages, compositing, licensing aspects, animating and rendering in Holographic farmat with alpha support and Encoding into Holographic data for cloud server etc., complete.

Wall 1 – Fruits

Holograph Display System (Hardware type)

Holograph Visuals (Software type)

Holographic Coeval (Software type)

Wall 2 – Vegetables

Holograph Display System (Hardware type)

Holograph Visuals(Software type)

Holographic Coeval (Software type)

Wall 3 – Flowers

Holograph Display System (Hardware type)

Holograph Visuals (Software type)

Holographic Coeval (Software type)

Wall 4 – Plants and Insects/Birds Relationship

Holograph Visuals (Software type)

Holographic Coeval (Software type)

Installation and others

Creating an unreal experience touch and react sensory with flowers at 360 degrees in a dark room for the audience to experience in a magical and artistic way.4 with 4 contents with sensors, system, saftware, programming and animation , High End Laser Pojectors 6 Nos with short throw and Ultra large projection.

Work 1 – Sunflower & Chrysanthemum Contents (Software type)

Work 2 – Roses & Rose Petals Contents (Software type)

Work 3 – Branching Tree and Growing Flowers Contents (Software type)

Work 4 – Flowers & Butterflies and Garden with Insects & Butterflies (Software type)

Work 5 - Softwares

Work 6 - Computer (Hardware type)

Work 7 - Sensors (Hardware type)

Work 8 – Projectors (Hardware type)

Work 9 - Installation and others

Estimation for Simulation and Calibration (Soft ware type)

Supplying and Installing two 3D shows: Real flowers and animated garden in 3D along with full setup including projection 3D glasses 20 Nos and Audio system.(Rod extension and plate has to be provided to fix the projector mount on it.) and Supplying high-end 3D Computer with 10 Nos True-D 3D glasses with charger and 3D HDMI cable for a full colour 3D.

Work 1 – Speakers, Computer & 3D Glasses (Hardware type)

Work 2 - Projector (Hardware type)

Work 3 - Content (Software type)

Work 4 – Installation and others completed

Complimentary – 3D Glasses and Training and others completed

Providing Cup-board shutter using termite/water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as hydraulic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer before use on work

Melamine Polish

Hydraulic door closer of various sizes of approved quality using aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment like HARDWYN (make) 'GAZEL' (or) equivalent (with ISI Monogram)

Supplying and fixing of High Pressure Mist Nozzles - 0.2 mm with 10/24" threaded connection. MoC – Brass coated with Chrome Nickel plating. Expected Particle size of the water droplet is 150 to 200 microns. Ceramic orifice with anti-drip function. The rate includes cost of material and labour charges for fixing and other necessary requirements.

Supplying and fixing in position of 3/8th High pressure stainlesssteel water conveyence tube 70 bar

Supplying and fixing in position of 1inch High Pressure Hydraulic tube with Operating pressure - 70 bar and burst pressure - 100 bar

Supplying and Fixing in position of High Pressure Pump -10 LPM - 70 bar.3HP - Three Phase - 415V. Maximum Pressure - 90 bar. Operating pressure - 70 bar.

Supplying and fixing in position of R.O Filter Planlet 20inch combo filter

Supplying and fixing in position of Protective cover for Nozzles

Supplying and fixing of three phase Electrical panel with 4P MCB 20A, 3P Conductor,3P OLR, On OFF Delay timer,Volt/Amps meter and other necessary wirs etc.

Supplying and fixing in position of 40mm dia stainless steel pipe grade 304N of 2mm thick with required bend provision for holding stainless steel water conveyance tube asdirected by departmental officers, The includes cost of mataterial, bending charges and koading unloading chares etc.

Plastering the new walls with Cement Mortar 1:3 12 mm thick using the river sand including curing and finishing neatly complying with standard specification and as directed by the departmental officers etc.

White washing one coat with freshly burnt white shell lime in all floors including cost of lime, blue powder, fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed by the departmental officers.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

For New Iron work Two coats including primer

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, etc complete complying with standard specification.

Fabricating and supplying and erecting the main gate / Wicket Gate / grill with necessary bolts and nuts including with one coat of red oxide primer and zinc chromate etc., complete complying with standard specification and an directed by the departmental officers.

AUTOMATIC MS GATE (Q)

Supplying and fixing in position of PVC water tank of capacity 5000litres for three times filling (Nozzle discharge = 150 ml /minute or 9 litre / hour,Quantum of water required = 324 nos x 9 lph = 2916lph ,Assuming 5 hours of Operation per day = 2916 x 5 = 14580 litre/day or 15000 litres/day,Tank capacity required = 15000 litres

Pump - i) Supply, Installation, Testing and Commissioning of 7.5HP Openwell Submersible pump with Suction Strainer(ss304) and neccessary PP Ropes. Make: KIRLOSKAR

ii) Supply, Installation, Testing and Commissioning of 3HP Openwell Submersible pump with Suction Strainer(ss304) and neccessary PP Ropes. Make: KIRLOSKAR

Interconnecting Plumbing- Supply, Installation, Testing and Commissioning of Interconnecting Plumbing between Well(Outer wall of Well), Nozzles and Upper Pond with UPVC pipes of sizes 4", 3", 2" & 1-1/2" & UPVC Fittings and Control Valves.

SS Mesh for the Dust Collecting Chamber- Supply, Installation, Testing and Commissioning of SSMesh Frame for Dust Collecting Chamber fabricated out of ss304 grade materials covered with SS Mesh as required.

Illumination - i) Supply, Installation, Testing and Commissioning of Stainless Steel body Underwater light fitting with glass shade and chord seal cable entry operating on 12V DC Supply with 12W LED Bulb Warm White including Fixing Bracketss as required.

ii) Supply, Installation, Testing and Commissioning of Stainless Steel body Underwater light fitting with glass shade and chord seal cable entry operating on 12V DC Supply with 24W LED Bulb RGB including Fixing Brackets as required.

Fountain Controller Unit- Supply, Installation, Testing & Commissioning of Indoor type Control Panel with powder coated finish along with – 1 no. 4P-63A MCB for Incoming Mains, 2no. Starter with O/L Relay for pump, 1no. Single Phase Preventor, 1no. 1P-6A MCB for Lights, 2no. 12V Power Supply, 2no. 24Hr Timer for Automatic ON/OFF Operation , Indicating Lamps including Panel wiring.

Showcase -1 (Mango tree, Banana bunch, jackfruit tree) 3D Model as per design Supply and fixing of Mango tree, Banana bunch, jackfruit tree 3D model as per design, displayed at the size of 65inch length, 39 inch height and 15 inch width. As per the following specifications. Sculpting Mangoes, Mango tree and branches, Banana bunch, Jackfruit trees and Branches, Banana bunch, jackfruit trees and branches and jackfruit with clay work.The mould is taken in Plaster of praise material over the formed figer.The place where the mould is taken is filled with 2 layer fiberglass material and then the fiber is made with a thickness of 4mm. Make Different shape leaves in fabric cloth materials by manual and stencil cut. Provide fabric dye colours in leaves. Leaves are arranged by Manual work.Provide sand floor in FRB material at the size of 65inch length, 15 inch width and 2 inch height . Finally painted with Duco multi color paint finish with a spray gun and artist manual work. The rate included materials,loading and unloading, transportations, fixing and all labour charges. Size - 65" x 39"x 15"

Showcase -2 (Grapes and Pinapple) 3D Model as per design Supply and fixing of Grapevine plant and Grape bunches, Pineapple fields and fruit 3D model as per design, displayed at the site of 65inch length, 39 inch height and 15 inch width. As per the following specifications. Sculpting Grapes bunches and pineapple fruits with clay work.The mould is taken in Plaster of praise material over the formed figer.The place where the mould is taken is filled with 2 layer fiberglass material and then the fiber is made with a thickness of 4mm. Provide 2 Nos FRB Stone Fencing pillar at the size 3 by 3 inch width 36 inch height.Make artifical leaves in branches.Provide sand floor in FRB material at the size of 65inch length, 15 inch width and 2 inch height . Finally painted with Duco multi color paint finish with a spray gun and artist manual work. The rate included materials,loading and unloading, transportations, fixing and all labour charges. Size - 65" x 39"x 15"

Showcase -3 (Apple and Kinnow Mandarin tree and Fruits ) 3D Model as per design Supply and fixing of Apple and Kinnow Mandar in tree and fruit 3D model as per design, displayed at the size of 65inch length, 39 inch height and 15 inch width. As per the following specifications. Sculpting Apple and Kinnow Mandarin tree and fruits with clay work.The mould is taken in Plaster of praise material over the formed figer.The place where the mould is taken is filled with 2 layer fiberglass material and then the fiber is made with a thickness of 4mm. Provide 10 Nos FRB Apple , Kinnow Mandarin fruit 15 Nos. Make Different shapes leaves in fabric cloth materils by manual and stencil cut.Provide fabric dye colours in leaves vine leaves are arranged by manual work. Provide sand floor in FRB material at the size of 65inch length, 15 inch width and 2 inch height . Finally painted with Duco multi color paint finish with a spray gun and artist manual work. The rate included materials,loading and unloading, transportations, fixing and all labour charges. Size - 65" x 39"x 15"

Showcase -4 (Anthurium,Orchid, Tuberose ) 3D Model as per design Supply and fixing of Anthurium,Orchid, Tuberose 3D model as per design, displayed at the size of 82inch length, 39 inch height and 15 inch width. As per the following specifications. Manual making work of Anthurium,Orchid, Tuberose stumps are made in metal wires, all over covered with fabric canvas materials, Flowers Petals making in canvas cloth with manual work.Provide 3 Nos FRB flower pot at the size of 15 inch height .Make Different shapes leaves in fabric cloth materils by manual and stencil cut. Finally painted with Duco multi color paint finish with a spray gun and artist manual work. The rate included materials,loading and unloading, transportations, fixing and all labour charges. Size - 82" x 39"x 15"

Showcase – 5 Pumpkin and Pumpkin Vine 3D Model as per Design (Pumpkin 4 No) Supplying and Fixing Pumpkin and Pumpkin Vine as per given Design, Displayed at the size 75-inch length, 36-inch width, and 10-inch height. As per the following specifications. Sculpting Pumpkin with clay work. The mould is taken in Plaster of Praise Material over the formed Figer. The place where the mould is taken is filled with 2-layer fiberglass material and then the Figer is made with a thickness of 4 mm. Provide Sand Floor in FRB Material at the size of 75-inch length 34-inch width, and 2-inch height.Make Different Shape Leaves in Fabric Cloth Materials by Manual and Stencil Cut. Provide Fabric Dye Colours in Leaves. Pumpkin vine Leaves are arranged by Manual Work. Finally Painted with Duco multi-color paint finish with a spry gun and Artist Manual work. The Rate included Materials, Transportation, Fixing, and Labor Charges. Size - 75” x 30” x 10”

Showcase – 6 Water Melon and Water Melon Vine 3D Model as per Design (Water Melon 4 No) Supplying and Fixing Water Melon and Water Melon Vine as per Design, Displayed at the size 75-inch length, 36-inch width, and 10-inch height. As per the following specifications. Sculpting Water Melon with clay work. The mould is taken in Plaster of Praise Material over the formed Figer. The place where the mould is taken is filled with 2-layer fiberglass material and then the Figer is made with a thickness of 4 mm. Provide Sand Floor in FRB Material at the size of 75-inch length 34-inch width, and 2-inch height. Make Different Shape Leaves in Fabric Cloth Materials by Manual and Stencil Cut. Provide Fabric Dye Colours in Leaves. Pumpkin vine Leaves are arranged by Manual Work. Finally Painted with Duco multi-color paint finish with a spry gun and Artist Manual work. The Rate included Materials, Transportation, Fixing, and Labor Charges. Size - 75” x 30” x 10”

Showcase – 7 Pepper, Pepper Vine, Nutmeg, and Clove Cashew Tree, Cashew Furit 3D Model as per Design Supplying and Fixing Pepper, Pepper Vine, Nutmeg, and Clove Cashew Tree, Cashew Fruit as per Design, Displayed at the size 84-inch length, 39-inch Height, and 15-inch width. As per the following specifications. Sculpting Pepper Bunches, Nutmeg Fruit, Clove Bunches, and Cashew Fruit with clay work. The mould is taken in Plaster of Praise Material over the formed Figer. The place where the mould is taken is filled with 2-layer fiberglass material and then the Figer is made with a thickness of 4 mm. Provide Sand Floor in FRB Material at the size of 84-inch length 15-inch width, and 2-inch height. Provide Nutmeg Branches in FRB Materials, Make Different Shape Leaves in Fabric Cloth Materials by Manual and Stencil Cut. Provide Fabric Dye Colours in Leaves. Pepper vine Leaves are arranged by Manual Work. Finally Painted with Duco multi-color paint finish with a spry gun and Artist Manual work. The Rate included Materials, Transportation, Fixing, and Labor Charges. Size - 84” x 39” x 15”

Showcase - 8 Tomato, Brinjal, and Chilli Plant 3D Model Supplying and Fixing Tomato, Brinjal, and Chilli Plants as per Design are displayed at 67-inch length, 39-inch height, and 15-inch width. As per the following specifications: Sculpting tomatoes, brinjal, and chilli with clay work. The mould is placed in plaster of praise material over the formed iger. The place where the mould is taken is filled with 2-layer fiberglass material, and then the Figer is made with a thickness of 4 mm. Provide a sand floor in FRB material at the size of 84 inches in length, 15 inches in width, and 2 inches in height. Tomato, Brinjal, and Chilli Stumps are provided in FRB Materials, and different fabric cloth materials used for leaf, shapes are provided by manual cutting and stencil cutting. Provide fabric dye colours in leaves. Artificial leaves are arranged in plant branches by manual work. Finally painted with Duco multi-color paint and finished with a spry gun and artist manual work. The rate included materials, transportation, fixing, and labour charges. Size - 67” x 39” x 15”

Showcase – 9 Potato, Carrot, Beetroot, Onion, and Radish 3D Model as per Design Supplying and Fixing Potato, Carrot, Beetroot, Onion, and Radish as per Design are displayed at the size 67-inch length, 12-inch height, and 8-inch width. As per the following specifications. Sculpting Potato, Carrot, Beetroot, Onion, Radish, and Sand with clay work. The mould is taken in Plaster of Praise Material over the formed Figer. The place where the mould is taken is filled with 2-layer fiberglass material and then the Figer is made with a thickness of 4 mm. Provide Sand Floor in FRB Material at the size of 67-inch length 12-inch width, and 8-inch height. Make Different Shape Leaves in Fabric Cloth Materials by Manual and Stencil Cut. Provide Fabric Dye Colours in Leaves. Artificial Leaves are arranged in plant Branches by Manual Work. Finally Painted with Duco multi-color paint finish with a spry gun and Artist Manual work. The Rate included Materials, Transportation, Fixing, and Labor Charges. Size - 65” x 12” x 8”

Showcase – 10 Bitter gourds, Bottle Gourd, snake gourd, and Ridge gourd 3D Model as per Design ” Supplying and Fixing Bitter gourd, Bottle Gourd, snake gourd, and Ridge gourd Vine as per Design are Displayed at the size 65-inch length, 15-inch width, and 39-inch height. As per the following specifications. Sculpting Bitter gourd, Bottle Gourd, snake gourd, and Ridge gourd with clay work. The mould is taken in Plaster of Praise Material over the formed Figer. The place where the mould is taken is filled with 2-layer fiberglass material and then the Figer is made with a thickness of 4 mm. Provide Sand Floor in FRB Material at the size of 65-inch length 15-inch width, and 2-inch height. Provide 3 NOs FRB Stone Fencing Pillar at the size 3 by 3-inch width 36-inch height. Provide Sand Floor in FRB Material at the size of 65-inch length 15-inch width, and 2-inch height. Make it Different Leaves Shape in Fabric canvas Materials by Manual and Stencil Cut. Provide Fabric Dye Colours in Fabric Leaves. vine Leaves are arranged by Manual Work. Finally Painted with Duco multi-color paint finish with a spry gun and Artist Manual work. The Rate included Materials, Transportation, Fixing, and Labor Charges. Size - 65” x 39” x 15”

Atmosphere Background : Designing, Printing and supplying Foam Board Print at the size of 72 inch length,39inch height. As per the following specifications, Provide Atmosphere background in Eco Solvent Print mounted on 3mm Foam Board with Matt lamination. The rate included designing, Printing, Transportation, fixing and labour charges

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Earth work excavation in all classes of soils except hard rock requiring blasting depositing on bank with initial lead of 10M and lift of 2M including all labour charges

Providing, Laying, Spreading and compacting graded stone aggregate to Wet Mix Macadam(WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in sub base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

Providing, Laying, Spreading and compacting graded stone aggregate to Water Bound Macadam(WBM) specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in WMM on well prepared surface and compacting with vibratory roller to achieve the desired density.

Providing, Laying, Spreading and compacting graded stone aggregate to Dense bituminous macadam(DBM) specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in WBM on well prepared surface and compacting with vibratory roller to achieve the desired density.

Bituminous Concrete 30 mm consolidated thickness using bitumen 60/70 grade as per clause 504 of MoRTH specification

Providing and laying Prime coat over WMM surface using 7.0 kgs. of emusion for 10 sqm.area including cost and conveyance of bituminous binder including labour charges for preparing the surface and applying the required quantity of bitumen as tack coat by bitumen sprayer etc., complete as per clause 503 of MOST specification

Providing and laying tack coat over BT surface using 2.5kgs. of emusion for 10 sqm.area including cost and conveyance of bituminous binder including labour charges for preparing the surface and applying the required quantity of bitumen as tack coat by bitumen sprayer etc., complete as per clause 503 of MOST specification

Providing And Fixing All Side Machine Cut Granite Stone Kerbs Using 0.40M Height 0.100M Thick And 0.6M Length Granite Stone Kerb Without Fragmentation For Platform Kerbs Including Cost And Conveyance of Granite Kerb From Available Source To Work Site Including Labour Charges For Fixing The Granite And Pointing With cm. 1:3 And All Other Incidental Charges Etc. Complete.

GST at 18 percentage

D KAMARAJ (BID ID -1077710)