Construction of 03 Addl. Classrooms (ACR) at Kunard Batpora

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:

P/l of stone soling including all carriages.by MT10km Avg Lead

P/l of RBM including all carriages.by MT10km Avg Lead

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: in 1:4:8 using 40mm nominal size aggregate.with

Providing and laying in position specified Grade of Reinforced cement concrete excluding the cost of centring, shutering and finishing of all work.1:1.5:3(1 Cement : 1.5 Coarse sand : 3 Graded stone aggregates 20 mm nominal size) Raft

Reinforced cement concrete work in beams, suspended floors, plinths roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: in 1:3:6 using 40mm nominal size aggregate.with 20% Plumusing 20mm n/s agg(Crsuher Bajri)

Providing & laying damp-proof Course of specified thickness 50mm with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg ) and curing complete job.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar1:6 ( 1 cement : 6 coarse sand) & Including Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length(KD Wood)

Providing and fixing 30 mm thick glazed shutter for windows and clearstory windows using 10kg/sqm (4mm thick)glass panes including black enamelled ISI marked M.S hinges with necessary screws. Imported wood (KD)

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood(KD) and well matched teak face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 30 mm thick

Providing and fixing 30 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge, imported (KD) wood

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.

Renewing (fixing) glass panes, with wooden fillets wherever necessary. Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)

Providing and fixing of Aluminium fittings. 150 mm tower Bolt

100mm tower Bolt

250mmx16 Al Drop

Centering and shuttering including strutting propping etc. and removal of form work; Foundations, footings, bases of columns, mass concreting.

Centering and shuttering including strutting propping etc. and removal of form work; Suspended floors, roofs, landings, balconies and access platforms.

12mm thick Plaster in cement Mortar 1:4 mix

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20mm nominal size stone aggregate.

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)(Snowsum)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete

Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded, Truss work with Soffit etc

Providing corrugated Colour coated G.S. sheet roofing including vertical / curvedsurface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses, soffit etc and including cutting to size and shape..0.50 thick

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.50 mm thick with zinc coating not less than 275 gram/m2

Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, (anchor) bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design, complete job

Providing and fixing electrical lighting points including wiring with 1.5 sqmm FRLS copper conductor PVC insulated wire of approved make (e.g., Polycab/Havells) in recessed medium-duty PVC conduit of suitable diameter, complete with modular switch, switch box, and bulb holder. Item includes supply and installation of LED bulbs of approved wattage (e.g., 9W/12W) and brand (e.g., Philips/Wipro), along with all accessories such as junction boxes, bends, tees, and saddles. All fittings shall be as per IS specifications and directions of Engineer-in-Charge. Complete job in all respects.

Providing and fixing electrical heating point comprising wiring with 2.5 sqmm FRLS copper conductor cable in heavy-duty ISI-marked PVC conduit, including modular 16A switch, socket outlet, power plug with indicator, junction boxes, bends, tees, saddles, and all accessories. The work includes complete installation, testing, and commissioning for single-phase heating appliances such as geysers or wall-mounted heaters. All materials shall be of approved make (e.g., Polycab/Havells for wiring, Anchor/Legrand for switches), and the installation shall conform to IS standards and site-specific requirements.

Providing and fixing electrical Fan points comprising wiring with 2.5 sqmm FRLS copper conductor cable in heavy-duty ISI-marked PVC conduit, including modular 16A switch, Dimmers socket outlet, power plug with indicator, junction boxes, bends, tees, saddles, and all accessories. The work includes complete installation, testing, and commissioning for single-phase heating appliances such as geysers or wall-mounted heaters. All materials shall be of approved make (e.g., Polycab/Havells for wiring, Anchor/Legrand for switches), and the installation shall conform to IS standards and site-specific requirements.

Carriage of Materials by MT from source to Works site. Sand/Bajri (Crusher 20mm) for an avg lead of 25km.

Carriage of Bricks for an Avg Lead of 140 KM

Provision for community information board and A4 size phtographs.