Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹83.9 LAccepted-AOC 6 SAI KRUPA SONAWANE PARK BEHIND TILAK NAGAR BUS STOP OZAR MIG NASHIK 422206 | NASHIK | NASHIK | MAHARASHTRA | 422206 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹89.5 L+₹5.5 L (6.57%)Rejected-Finance FLAT NO 104 SAI VIHAR APARTMENT A WING INFRONT OF NASIK HOSPITAL KATHE GALLI NASIK 422 011 | NASIK | NASHIK | MAHARASHTRA | 422011 | L2 | Rejected-Finance NOT LOWEST |
Tender Value
₹85 L
EMD Value
₹1.5 L
Closing Date
15 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE DEOLALI
HQ CWE DEOLALI, ONSLOW ROAD, DEOLALI (MH)
AS PER TENDER DOCUMENTS
2022_MES_544821_1
86860/E8
Open Tender
Civil Works - Roads
Item Rate
180 days
DEOLALI
AS PER NIT
7 documents required · 7 mandatory
₹1,000
Yes
GE DEOLALI
₹1.5 L
Yes
14 Nov 2022
11 Aug 2022
17 Sept 2022
11 Aug 2022
15 Sept 2022
2 Sept 2022
12 Aug 2022 - 19 Aug 2022
Amount
Repairs to pot holes any depth, not exceeding 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 Sqm of paving bitumen, VG-10 putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m of paving bitumen, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of pot holes exceeding 30mm all as specified and directed.
M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and applying evenly priming/ tack coat with bituminous primer (Paving VG - 10 grade bitumen) @ 2.50 Kg per 10 Sqm complete all as specified and directed.
M&L for preparing existing WBM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and applying evenly priming/ tack coat with bituminous primer (Paving VG - 10 grade bitumen) @7.5 Kg per 10 Sqm complete all as specified and directed.
M&L for premixed bituminous semi-dense asphaltic concrete 30mm consolidated thickeness laid using mechanical paver for any width of road with max 5.0% binder content, paving butimen VG-30 grade by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all specified & directed. Note : 5.0% binder content shall be for pricing purpose only. Any deviation in minus side shall be adjusted as specified in Clause 9.1 of Particular specifications and no price adjustment shall be made for plus side variation.
M&L for premixed bituminous macadam laid using mechanical paver for any width of road, rolled & compacted to required gradient and camber (consolidated thickness 75mm or less) with binder content (paving VG - 30 grade bitumen) of min. 4% by weight of total mix all as specified & directed Note: 4% binder content shall be for pricing purpose only. Any deviation in minus side shall be adjusted as specified in Clause 10 of Particular specifications and no price adjustment shall be made for plus side variation.
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all specified and as directed.
M&L for painting line, dashes, arrow, letters etc. on road pavement (parking etc.) providing & applying 2 mm thick road marking strips (reflective) of specified shade /colour using hot thermoplastic material fully / semi-automatic application machine fitted with profile shoe heater driven by experienced operator on road surfaces including preparation of previously treated surfaces , cleaning surfaces of all dirt, scales, oils, grease & foreign materials etc. complete all as specified and directed by Engineer- in- charge.
S&F for MS Delineator SVD-3, 1200mm long, 76.1mm dia (OD) M.S. pipe light grade (3.25mm thick) filled with PCC 1:2:4, with HIP 76.1mm around. Three strip 50mm width with blue, white, red or any other colour directed by Engr-in-charge, HI reflective tape and with MS jali/mesh 2mm dia aperture 25mmx25mm in pipe shape as guard bar, (Mesh having size c/c dia 120mm, Ht 250mm) mounted on 1.25mm thick MS circular plain sheet and top closed with same circular sheet including necessary excavation and foundation PCC in cement concrete 1:2:4 of size 30x30x30cm, including pepration of steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F in repairs cats eye stud of size 100mm x 90mm (ABS) Yellow body fixed complete all as per Manufacturers instructions and as directed. Make : 3M, Green lite or equivalent as approved by GE
S&F in repair steel cat eyes "Solar type" heavy duty round/ rectangular, Double-Sided-Flashing, Three LED on each side, fixed on road with nails all as specified and approved. Make : 3M, Green lite or equivalent as approved by GE
M&L for Providing, precast cement concrete Type B1 1:2:4 (20 mm graded aggregate in window or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex/kerb stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting cement mortar 1:4 complete with joints to match including demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.
Preparation of new or previously untreated stone, concrete or plaster surface of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel over a coat of primer complete all as specified and directed.
Preparation of new or previously untreated stone, concrete or plaster surface of any description over 10cm girth or width, not otherwise described and applying one coat of synthetic enamel complete all as specified and directed.
S&F retro reflective sheet, blue, white, red, green or any other colour as directed by Engineer in Charge on existing boards complete all as specified and directed.
S&F repairs road side convex mirror of 60cm dia ourdoor mirror in blind spot for driveways etc all as per manufacturer instructions. Make: 3M or equivalent as approved by GE.
Demolition of stone slabs and tiles laid bedded and pointed in any mortar of any description or thicness in floors, apron etc all as specified.
Demolition of concrete in ground floors & paving not exc 15cm thickness (below or above ground level) complete all as specified.
M & L Machine pressed precast concrete interlocking paver block of any colour any shape and size confirming to IS 15658-2006 of rubber moulded 80mm thickness, M-40 Grade with grey cement and pigment complete all as specified. Make: TOPAZ/Mehtab Tiles/NITCO/ULTRA/Any other ISI Marked as approved by GE
M & L for Sand filling under floors or in foundation including watering and consolidation
M & L for Cement concrete as PCC 1:4:8 type D-2 using (40mm graded stone aggregate) as fin sub base to receive floor finish complete all as specified.
M&L for Plain Cement concrete type B-O, 1:2:4 (using 12.5mm graded aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth coures, string courses water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.
M&L for chequrred cement concrete tiles rubber moulded, 30cm x 30cm x 25 mm thick conforming to IS 13801-1993 set, jointed and pointed in neat cement slurry with grey cement and pigment in floors including cement mortar 1:6 screed bed 15mm thick complete all as specified and directed.
M/S K.K.BINNAR
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .