Construction of ware House for storage of Electronics Voting Machines (EVMs) and VVPATs for Distt. Shimla. At Fagu Tehsil and Distt. Shimla HP

Amount

Cutting in earth work in by mechanical means all heights and depths in all kinds of soils, including saturated soils comprising of pick work , Jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (Where blasting is prohibited) and their intermediate classification of soil including, dewatring where required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in - charge at site, according to the HP.PWD. specification of 1990( One Thousand Nine Hundred ninety) Volume-I (One) and sorting out useful and unuseful matreial and Transportation of the unuseful matreial for disposing at dumping site ( To be arranged by the Contractor) as per satisfacation of Engineer -in- Charge through all modes of transportation including head load , animal load or mechnical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechnical means and labour( If required). All useful material such as stone , shingles aggregate and slates Shall be properly Stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation as per direction of the Engineer -in -charfe . The recovery for stones, weather useful or not, for the minimum quatom of 33.00 cubic meter @ Rupee 300/- Only (Rupees. Three hundred) per cubic meter Shall be effected on pro rata basis in all circumstances. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Excavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the engineer -in-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used /removed as per the direction of the Engineer - in- charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Excavation in drain and channel in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the engineer -in-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing off to dumping site (To be arranged by the contractor) as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used /removed as per the direction of the Engineer - in- charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing form work with steel plates 3.15 mm (three point one five milimetre) thick welded with angle iron in frame 30x30x5 mm,so as to give a fair finish including centring ,shuttering,strutting and propping etc. with wooden /steel battens and ballies, height of propping and centring below supporting floor to ceiling in all heights and level and removal of the same for in situ reinforced concrete & plain concrete work including carriage of materials through all mode of transportation with in all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge in :-Foundation footing and basis of columns, etc. and mass concrete.

Flat surfaces such as soffits of suspended floors,roofs,landings and the like of any thickness in all Floor level in all hieghts.

Vertical surfaces such as walls (any thickness) partitions and the like in all Floor level in all heights.

Columns,pillars,posts and struts Square,rectangular or polygonal in plan in all Floor level in all heights.

Stair cases with sloping or stepped soffits excluding landing in all Floor level in all heights.

Beams, Cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels in all depth and hights.

Edges of slabs and break in floors and walls in any width.

Providing and laying cement conrete 1: 6:12 (One cement : Six sand: twelve graded/ crushed stone aggregate 40 mm (Forty milimetre) nominal size) mechnically mixed and compacted the concrete with vibrator and curing complete excluding the cost of form work in foundation and plinth including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and laying cement concrete 1:5:10 (One cement isto five sand isto ten crushed stone aggregate 40 mm (Forty millimeter) nominal size) mechanically mixed and vibrated curing complete excluding cost of centering and shuttering in foundation and plinth and as per HP. PWD. specifications of 1990 volume-I. including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and laying cement concrete 1:4:8 (One cement: Four sand :Eight graded cursed/broken stone aggregate 40mm) (forty millimeters nominal size) mechanically mixed and curing complete, including cost of form work in R/wall & B/wall including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and laying cement concrete 1:4:8 (One cement: Four sand :Eight graded cursed/broken stone aggregate 25mm) (tewnty five millimeters nominal size) mechanically mixed and curing complete, excluding cost of form work in foundation and plinth including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and laying cement concrete 1:1.5:3 (one cement: one point five sand: three graded stone aggregate 20 mm (Twenty millimeter) nominal size) mechanical mixed and vibrated including curing complete excluding cost of form work and reinforcement for R.C.C including carriage of materals, labour, tool and plants through all modes of transportations with in all leads and lifts, as per PWD.specifications and as per direction of the Engineer-in-charge in :- Foundation, footings, bases of columns and the like and mass concrete in all depth.

Column, pillars post and struts in super structure for all floor in all heights.

Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and contilevers in super structure for all floor and in all heights

Stair cases (except spiral stair case) excluding landing but including preparing of the surface and finishing of nosing in superstructure for all heights.

wall (any thickness) less then 0.10meter thickness including attached pillaster butteres, plinth and string coureses etc. from top of foundation.

Providing and laying in all floor level in all heights reinforced cement concrete 1:1.5:3 (one cement : one point five Sand : three graded stone aggregate 20mm (twenty milimetre) nominal size) to give a smooth and even surface including centring and shuttering etc. but excluding cost of reinforcement in string courses, copings, bed plates, anchor blocks, plain windows sills and the like including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-Charge

Providing and laying cement concrete 1:2:4 (one cement : two Sand : four graded stone aggregate 20mm(twenty milimetre) nominal size) and curing comlpete excluding cost of form work and reinforcement forreinforced in Suspended floors and the like including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-Charge

Providing Tor steel reinforcement of TATA Tiscon/SAIL/Rashtria Ispat incluiding cost of binding wire for R.C.C. work including cutting, bending, binding and placing in position complete in all floor levels in all heights including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-Charge.

Brick work using common burnt clay building bricks in foundation and plinth in Cement Mortar 1:6 (One cement : Six sand) Second Class Bricks including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-Charge.

Brick work using common burnt clay building brick in Rat Trap bond bricks masonry (on 3" edge) cavity should be broken after six layers, the course below sill and lintel to be a soild course. The masonry on the side of the opening also to be solid in superstructure cement mortar 1:4 (one cement : four sand) with second class bricks upto all floor level in all heights complete as per HP.PWD specification volume-I including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and laying brick work using common burnt clay building brick in Cement Mortar 1:6 (one cement:six sand) 2nd class bricks in super structure for all floors and heights including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-Charge.

Providing and laying second classs half brick masonry in common burnt clay building bricks in foundation and plinth level in Cement Mortar 1:4 (One cement: Four sand) including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and laying 2nd class half brick masonry in common burnt clay building bricks in cement Mortar 1:4 (one cement: four sand) in super structure for all floor in all heights including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and laying random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (One cement : Six sand : twelve graded stone aggregate 20mm (twenty milimeter) nominal size in cement mortar 1:6(One cement : Six sand) in breast walls and retaining walls including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge

Providing and laying square rubble masonry coursed with hard stone of approved quality in foundation and plinth in R/wall, B/wall and boundary wall including reking out joints in cement concrete 1:6:(One cement : Six sand) including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge

Stone soling under floor dry hand packed with hard stone of approved quality consolidated properly with hand or mechanical hammer to required level as per HP.PWD specification 1990 Volume-1 including carriage of materials, labour tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Stone filling behind return wall / edge wall complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing weep holes in brick masonry/stone masonry/plain reinforced concrete abutment, wing wall, return wall with 100mm dia PVC pipe extending through the full with of the structures with slope of 1 (v):20 (H) to wards draining face complete as per specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing PGI sheet 0.63mm(zero point six three milimetre) thick lining on inside of the shutter with approved adhesive screws or nails etc. complete as per HPPWD specification 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing 40mm thick pannelled door shutter with frame of 1st class deodar wood and 12mm (twelve milimetre) thick prelaminated board both side bwp phenol bonded exterior/ interior grade including bright finished/ black enamelled iron butt hinges with necessary screw as per HPPWD specification of 1990 volume -I including carriage of material, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in-Charge.

Providing and fixing 19mm (Nineteen milimetre) thick commercial board ISI marked of uniply/green ply or its equivalent) for shutter of cup board with butt joints & fixing with nails & screws etc. complete as per HPPWD specification 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing 19mm (Nineteen milimetre) thick commercial board (ISI marked) in shelves/boxes for cup boards including fixing with nickel plated piano hinges with screws etc. complete as per HPPWD specification 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge

Providing and fixing 1.00mm (one milimetre) thick coloured or plain lamination sheet (ISI mark) (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete as per HPPWD specification 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing first class Indian teak wood plain square edged cover fillets beading 19 x 6mm (Ninteen milimetre into six milimetre) section including mitring at junction with wooden screws and nails complete as per HPPWD specification 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge

Providing and fixing 6mm (six milimetre) thick water proof plywood lining with butt jointing and nails (back side of cupboards) with necessary screws and adhesive complete as per HPPWD specification 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge

Providing and fixing all weather proof ACP imported sign pannel all weather proof multicolour computerised reflected digital pannel 3mm(three milimetre) thick mounted on powder coated G.I. frame work fixed/hanging with wall or ceiling etc. with specified clamps and G.I. wires and rawl plugs etc. complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing 2nd class Kail wood work in frames of false ceiling partition etc. sawn and put up in position including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing M.S sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws and nuts etc. complete including carriage of materials through all modes of transportations with in all leads and lifts and as per HPPWD specification 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge:-300 X 16 mm(three hundred into sixteen milimetre) size

250 X 16 mm (two hundred fifty into sixteen milimetre)size.

Providing and fixing M.S. tower bolts (Barrel type) to required shade and colour with screws etc. complete includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge:-250 x 10 mm (two hundred fifty into ten milimetre)size

200 x 10 mm (two hundred into ten milimetre)size

Providing and fixing M.S. handles anodized transparent or dyed to required colour and shade with necessary screws etc. complete includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge:-125 mm (One hundred twenty five milimetre)size

100 mm (one hundred milimetre)size.

Providing and fixing oxidied M.S. single acting spring hinges 125mm (One hundred twenty five milimetre) as per NCL seccolor company specification etc. complete includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge

100mm (One hundred milimetre)

Providing and fixing bright finished magnetic catcher (M15) as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing150mm (One hundred fifty milimetre)M.S hasps and stapples anodoized transprent or died to requried shade and colour (safety type) with necessary screws etc complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing 100mm(One hundred milimetre) bright finished brass floor door stopper with rubber cushion screws etc. tosuit shutter thickness complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing bright finished brass furniture handles as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing M.S. hooks and eyes complete 150mm (One hundred fifty milimietre) including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing plain M.S. grills of required pattern in steel frames of windows and ventilators etc, with M.S. flats, square or round bars well welded with steel frame of window and ventilator and as per HP. PWD. specifications of 1990 volume-I. including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and laying 50mm thick cement concrete flooring 1:2:4 (one cement : two sand: four graded stone aggregate 20 mm (twenty milimetre) nominal size) crushed stone aggregate mechanical mixed laid in one layer finished with a floating coat of neat Cement includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge

Providing and laying 2 mm (two milimetre) thick pvc(Heavy duty) Homogeneous of Almost antistatic vinyl flooring plain or coloured curbed mosaic or metalled finish laid with approved adhesive on sub floor (damp proof treatment to be measured and paid for separately) as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge

Providing and laying 25mm (twenty five milimetre)thick prepolished kota stone slab flooring laid on 20mm(twenty milimetre) (average ) thick base of cement mortar 1:4 (one cement:foursand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete in all floors including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and laying 25mm thick prepolished kota stone slab in risers of steps. skirting dado and pillars laid on 12mm (tweleve milimetre) (average) thick cement mortar 1:3 (one cement:three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete in all floors including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and laying Duro stone vetrified tiles (300x300mmx10mm)(three hundred into three hundred milimetre into ten milimetre) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm(twelve milimetre) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-Charge.

Providing and laying marble work (Table rubbed and polished) in flooring on 20mm (twenty milimetre) thick base in cement mortar 1:3(one cement:three sand) including jointing with cement mortar 1:2(one white cement:two marble dust) with an admixure of pigment to match the shade of the marble. 20 mm (twenty milimetre) thick White makrana marble complete including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-Charge.

Providing and fixing white glazed tiles 6mm (six milimetre) thick in skirting risers of steps and dado on 12mm (twelve milimetre)thick cement mortar 1:3 (One cement : Three sand) and jointed with cement slurry for all floor including entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications of 1990 vol. I and as per direction of Engineer-in-Charge.

Providing and laying red sand stone slab flooring 40mm (forty milimetre) average thick on 20mm (twenty milimetre) average thick base of cement mortar 1:4 (one cement : four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab i/c rubbing and granite polish finish complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and laying 60mm (sixty milimetre )thick heavy duty precast cement concrete inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm (twenty five miliemtre) thick average thickness of cement mortar 1:4 (one cement : four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing, rubbing & polishing complete (Sub base concrete floor to be paid for complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Making moulded nosing in terrazzo including returned moulded ends and angles to mouldings complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing 0.60mm (zero point sixty milimetre) thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing ridges or hips 60 cm(sixty centimetre) overall with 0.60mm (zero point sixty milimetre) thick prepainted steel sheets of TATA Durashine in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing valley 90 cm (ninety centimetre) overall 0.60mm (zero point six zero milimetre) thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing flushing 38cm(thre eight centimetre) overall with 0.60mm(zero point six zero milimetre) thick P.G.I. sheet of TATA Durashine in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm(six milimetre) dia meter & prepainted G.I. limpet & bitumen washers complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing 30 cm wide 120 cm (One hundred twenty centimetre)overall box type 0.63mm (zero point six three milimetre) thick PGI sheet gutter including making necessary connections with rain water pipe complete as per design complete with all accessories complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing on wall face 150mm(One hundred fifty milimetre) dia M.S rain water pipe of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing on wall face M.S. accessories for rain water pipe including filling the joints with approved adhesive complete 150mm (One hundred fifty milimetre) nominal size including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge. :-M.S. Plain bend 150mm(One hundred fifty milimetre) dia.

M.S.Plain Shoe 150mm(One hundred fifty milimetre) dia.

Providing and fixing M.S. sheet holder bat clamps of approved design to 150mm (one hundred fifty milimetre) dia M.S pipes embeded in and including cement concrete blocks 10x10x10 cm of 1:2:4:mix (One cement two sand four stone graded stone aggregate 20 mm (twenty milimetre) nominal size) and cost of cutting holes and making good the wall etc. complete as per HP.PWD., specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing M.S. BP Sheet 2mm (two milimetre)thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) complete as per HP.PWD., specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing steel work of TATA SALT or RASHTRIYA ISPAT welded in built up sections/hollow section in trusses and framed work, including cutting,hoisting , fixing in position and applying a priming coat of red lead paint complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.:-In trusses and trussed purlings in buildings

In gratings, framed, guards, bars ladders and railing, brackets and similar works.

Providing and fixing angle iron door,window,clerestory window frame manufactured from steel iron section of 40X40X6 mm,(forty into forty into six milimetre)thickness including hinges jamb,lock jamb,beed and if required angle thrashold ofmild steel angle 50X25 mm (fifty into twenty five milimetre)welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm(two point five milimetre) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing door ,windows and ventilators frames manufactured from M.S. channel section 75x40mm with with M.S. flat 40 x 12mm(forty into tweleve milimetre) welded together to make one frame complete including applying a coat of steel primer after treatement surface complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing moulded hand rail of M.S. hollow pipe 50mm (fifty milimetre)dia welded in straight length over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat and balusters of railings shall be measured and paid separately including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm lugs 10 cm.long embedded in cement concrete blocks 15 cmx10cmx10cm (fifteen centimetre into ten centimetre into ten centimetre)size of 1:3:6(one cement: three sand: six graded stone aggregate 20mm(twenty milimetre) nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings, including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. :-Fixed steel window

Side hung window

Applying priming coat over new steel and other matel surfaces after and including preparing the surface by thoroughly cleaning oil, grease,dirt and other foreign matter, sand papering and knotting. ready mixed priming paint brushing red lead red oxide/ zinc oxide chrome for all floor including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Painting two costs (excluding priming cost on new steel and other metal surfaces with enamel paint other than white brushing to give an even shade including cleaning the surface of all dirt,dust and other foregin matter paint complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease,dirt and other foreign matter, sand papering and knotting. readymixed paint brushing wood primer pink for all floor including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Painting two coats (excluding priming costs) on new wood and wood based surfaces with enamel paint other than white to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters sand papering and stopping for all floor including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-Charge.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Finishing wall with water proof exterior grade emulsion of of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface of all dirt, dust and other foreign matter sand including sand papering smooth complete for all floors in all heights including carriage of materials through all modes of transportationswith in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Applying priming coat with readymixed primer on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Painting two coats(excluding priming coat on new concrete/ masonry/plaster surfaces with readymixed paint of approved brand and manufacture for use on floors to give an even shade including cleaning the surface of all dirt,dust and other foreign matter and sand papering as required with Paint other than white complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge

Providing 6mm(six milimetre) thick cement plaster to ceiling. in cement mortar 1:4 (one cement : four sand) in all floor level including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing 15 mm (fifteen milimetre) thick cement plaster in single coat on the rough side of brick/concrete walls for internal /external plastering in all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80 mm(eighty milimetre) in girth and finished even and smooth cement mortar 1:6 (one cement : six sand) including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing 15 mm (fifteen miliemtre) cement plaster in single coat on fair side of brick/concrete walls for internal /external plastering in all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar 1:6 (One cement : Six sand) including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing 20mm (twenty milimetre)cement plaster in single coat on rough side of brick/ stone masonry for internal plastering in all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80 mm (eighty milimetre) in girth and finished even and smooth. Cement mortar 1:4 (One cement : four sand) including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Distempering two coats with Ist quality oil bound washable distemper of approved shade and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer for all floors including entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge.

Providing plinth protection 50 mm(fifty milimetre) thick in cement concrete 1:3:6 (One cement: Three sand : Six crushed stone aggregate 20 mm (Twenty milimeter) nominal size) including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing under layer for plinth protection of 75mm(Seventy five milimetres) thick (un-consolidated) bed of dry brick/stone aggregate 40mm(Forty milimetres) nominal sizes well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of materials through all modes of transportationswith in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and laying heavy duty 60 mm( Sixty) thick precast cement conrete inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm (Twenty Five) thick average thickness of cement mortar 1:4 (ONe cement : Four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for separately.

Constructing coursed rubble hammer dressed U shape open surface drain with side wall 15x22cm (fifteen into twenty two centimetre) in cement mortar 1:6 (One cement : Six sand) and inside plastering with cement plaster 1:3 (One cement : three sand) including earth work and laying 10cm cement concrete in 1:5:10 (one cement: five sand: ten crushed stone aggregate of 40mm(forty milimetre) nominal size) and 7.5cm(seven point five centimetre) cement concrete 1:2:4 (One cement: Two sand: Four crushed stone aggregate of 20mm(twenty milimetre) nominal size) and finished with a floating coat of neat cement as per standard design including entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge.

Providing fixing electric coiled wite fencing on boundary wall complete job as per drawing including entire carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge.

Providing and laying in trenches, galvanised mild steel tubes (medium grade), tube fittings (earth work in trenches to be measured and paid separately) including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.:-20mm (twenty milimetre) nominal bore.

25mm (twenty five miliemtre)nominal bore.

15mm (fifteen milimetre)nominal bore.

Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm (twenty milimetre to forty milimetre) nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Fixing water meter stop-cock 25mm (twenty five milimetre) nominal bore in galvanised mild steel tube including necessary fittings such as mild steel galvanised jam nut, sockets, etc. cutting and making long screws complete (water metre and stop-cock to be measured and paid for separately) complete including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Providing and fixing vitreous China wash down, water closet squatting pan (Orissa Pattern of Hindware Indian type W.C pan) Cat No.20004 having size 58x40 cm (fifty eight into forty centimetre) (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) as per HP.PWD., Specifications of 1990 volume-I including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing vitreous China wash down, water closet Anglo Indian Universal coset of Hindware (European type. W.C. pan) Cat No.20049 of Hindware or its Equivalent with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(one cement : one sand) (Seat and over to be measured and paid for separately) including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing 100 mm (One hundred milimetre)dia. PVC ‘P’ or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers SOLID TYPE white plastic seat and cover including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings Flat back 550mmx400mm (five hundred fifty milimetre into four hundred milimetre) including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge

Providing and fixing C.P. Brass waste for wash basin or sink 32mm (thirty two milimetre) dia including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge

Providing and fixing M.I. Union for wash basin or sink 32mm (thirty two milimetre) dia including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge

Providing and fixing 600mm x 450 mm (six hundred milimetre into four hundred fifty milimetre) bevelled edge mirror of superior glass mounted on 6mm(six milimetre) thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing PTMT jet spray of approved quality and colour with one metre tube including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing 100 mm(One hundred milimetre) dia chromium plated grating of superior quality for floor, gully or nahani trap including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing C.P. Brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. Brass screws 600mm x 20mm (six hundred milimetre into twenty milimetre)including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing toilet paper holder C.P. brass including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge

Providing and fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge

Providing and fixing C.P. brass bib tap with Capstan head 15mm(fifteen milimetre) dia including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

C.P brass pillar tap with Capstan head 15mm (fifteen milimetre) dia including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing C.P. brass angle valve 15mm(fifteen milimetre)without Nuts and pipe including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing vitreous China bowl pattern urinal including connection the urinal waste pipe by means of white lead mixed with chopped hemp ( waste pipe) to be measured and paid for separarely (Size 430 x 269 mm x 359mm (size four hundred thirty into two hundred sixty nine milimetre) into three hundred fifty nine milimetre)flat back) including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Cutting chase in stone/ brick masonry walls for fixing sand cast iron / cast spun iron pipe and fitting including making good the same with stone/ brick work in cement mortor 1:3(one cement : three sand) including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.:-75mm (seventy five milimetre)nominal dia

100mm (One hundred milimetre)nominal dia

Providing and fixing P.V.C connection with brass unions 300/450mm length 15mm nominal bore including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing Plytheline – Aluminium - Polyethylene (PE-AL-PE) composite pressure pipe U.V. stabilized with carbon black confirming to IS-15450-2004 water supply including clamp at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipes exposed on wall Internal work-Exposed on wall including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.:-1216 (16 mm(sixteen milimetre) O.D. pipe).

1620 (20 mm (twenty milimetre)OD pipe).

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc.:-Equal Tees:- 1620

Equal Tees:-1216

Reducing Tee:- 1620 x all branches.

2025 x with all branches

Female branch TEE:- 1620 X 1620 X 20 mm(One thousand six hundred twenty into One thousand six hundred twenty into twenty milimetre) thread

1216 X 1216 X 15 mm (One thousand two hundred sixteen into One thousand two hundred sixteen into fifteen milimetre) thread

Female elbows:- 1620 X 15 mm (One thousand six hundred twenty into fifteen milimetre) thread.

1216 X 15 mm ( One thousand two hundred sixteen into fifteen milimetre) thread

Male thread connector:- 1620 X 15 mm (One thousand six hundred twenty into fifteen milimetre)thread.

1216 X 15 mm (One thousand two hundred sixteen into fifteen milimetre) thread.

Female thread connector:- 1620 X 15 mm(One thousand six hundred twenty into fifteen milimetre)thread.

1216 X 15 mm thread.

Couplers:- 1620

Couplers 1216

Reducers:- 1620 x 1216.

Providing and fixing PVC 2000 litres (two thousand liters) net capacity water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm(fifteen milimetre) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.:-110 mm x 90 mm(one hundred ten milimetre into ninety milimetre)

110 mm x 75 mm.(one hundred ten into seventy five milimetre)

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.:-75mm (seventy five milimetre) dia.

110 mm (one hundred ten milimetre)dia.

150 mm (One hundred fifty miliemtre)dia.

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.:-110 mm (one hundred ten milimetre)dia.

75mm (seventy five milimetre) dia.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.:-110 mm (one hundred ten milimetre) dia.

75mm (seventy five milimetre) dia.

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.:-110 mm(one hundred ten milimetre) dia.

75mm (seventy five milimetre)dia.

Providing and fixing M.S. sheet clamps of approved design with steel screws and rawal plugs etc. complete including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.:-110 mm (one hundred ten milimetre)dia.

75mm (seventy five milimetre)dia.

Providing and fixing15mm(fifteen milimetre) dia brass stop cock complete including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.

Providing and fixing PVC low level flushing cistern. 10.00 liters (ten point zero litres) capacity (full flush) European standard control with a pair of C.I. brackets ,With fittings such as lead valve syphon, 15mm(fifteen milimetre) nomilal size PVC ball valve with polythene flot ,with push botten, coupling for connection with complete with inlet, outlet and overflow pipes ,40 mm(forty milimetre) dia C.P. flush bend etc. complete.No. 2603 of CERA/ HINDWARE including carriage of materials through all modes of transportationswith in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Constructing manhole with R.C.C. top slab in 1:2:4 mix (one cement : two sand : four graded stone aggregate 20mm (twenty milimetre) nominal size), foundation concrete 1:4:8 ( one cement ; four sand : eight graded stone aggregate 40 mm(forty milimetre) nomonal size), inside plastering 15mm (fifteen milimetre)thick with cement mortar 1:3 (one cement : three sand) and finished with floating coat of neat cement and making channels in cement concrete 1:2:4 mix (one cement : two sand : four graded stone aggregate 20mm(twenty milimetre) nominal size) finished smooth complete including curing and testing including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.:-Inside size 800mm x800mm and 1000 mm (eight hundred milimetre into eight hundred milimetre and one thousand milimetre) deep including man hole cover size 500mm x 650mm x 62.5 mm(five hundred milimetre into six hundred fifty milimetre into sixty two point five milimetre) of precast reinforced cement concrete 1:1.5:3 (one cement :one point five Sand :three crushed stone aggregate 20mm (twenty milimetre) nominal size) complete with 200mm(two hundred milimetre) thick walls of brick masonary using common burnt building bricks in cement mortar 1:3 (one cement : three sand).

Providing and fixing 300 x 300mm (Three hundred milimiter istoThree hundred milimeter) size reianforced cement concrete man hole cover 75mm (seventy five milimetre) thick with iron frame i/c including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 600 x 455mm (Four hundred fifty five milimiter isto six hundred milimeter) size reianforced cement concrete man hole cover 75mm (seventy five milimetre) thick with iron frame i/c including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Supplying and filling brick bats in depression trenches as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Om Parkash Sharma

J L Chauhan

Ramesh Hetta