Fabrication, Supply and Installation of Entrance Canopy System including Stainless Steel Structure, Spider Glazing, Accessories and Associated Works at World Trade Centre, Nauroji Nagar, New Delhi, 110029

Bill of Quantity (BOQ)

MARKET RATE MR AMOUNT

S.No. DSR/NS Description of item of work Unit QTY INLCUDING COST AMOUNT IN

Providing, fabricating, erecting and fixing Stainless Steel Grade 316 tubular framework comprising SS 316 square/rectangular hollow sections

of approved sizes and thicknesses, including cutting, bending, drilling, welding with SS electrodes/filler wire, grinding, buffing, polishing, fixing

in position with SS 316 bolts, nuts, washers, anchor fasteners, cleats, brackets, base plates, gussets and all necessary accessories complete

as per approved drawings and directions of Engineer-in-Charge. The rate shall include all labour, materials, tools & plants, scaffolding,

transportation, loading/unloading, handling, erection, alignment and finishing complete. Measurement shall be made on the basis of actual

weight of stainless steel members only.

Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The

Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear

toughened glass + 1.52 SGP interlayered + 12mm thick toughened glass ( 25.52 thick laminated fritted glass ) held together with SS- 316

Grade Stainless steel Spider & bolt assembly.The Glass panel assembly shall be connected to SS tubular structure of grade SS-316 by

means of SS- 316 Grade stainless steel brackets & Anchor bolts a using fastener & anchor bolts, non staining weather sealants of approved

make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved

2 NS drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass Sqm 165 26219.6 4326234

panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the

entire system fully water proof & dust proof.

The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other

incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS

channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the

portion of Glass panel inside the SS channel shall be measured.

Providing and fixing 50 mm dia stainless steel pipe tension rod assembly comprising stainless steel pipe, 12 mm thick stainless steel ear

plates at both ends, including cutting, bending, drilling, welding, grinding, polishing, fixing with stainless steel bolts, nuts and washers, complete

as per approved shop drawings and directions of Engineer-in-Charge, including all labour, materials, tools and tackles required for proper

completion of the work.

Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum

4 NS 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7

microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :

i) NS Gutter ( 600mm over all girth ) Metre 41 1430.16 58636.56

ii) NS Flashing/Aprons ( upto 600 mm ) Metre 41 1430.16 58636.56

'Removing existing glazing panels, including all associated fittings, fixtures, beading, gaskets, sealants, and accessories complete, as

required, to make the area available for installation of stainless steel framework for glass canopy. The work shall be carried out carefully

without damage to the glazing panels and adjoining structures. The dismantled glazing panels and accessories shall be stacked safely and

transported to the location as directed by the Engineer-in-Charge within a lead of 100 metres, complete in all respects

'Refixing of dismantled glazing panels, including providing and fixing all necessary fittings, fixtures, sealants, gaskets, and accessories

complete, ensuring proper alignment, weather-tightness, and finish to match the existing glazing system in all respects.

Grand Total- 18018109.12

Grand Total- 18018109.12

Digitally signed by RAJ PAL