Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.8 LAccepted-AOC | L1 | Accepted-AOC Lowest bid value | |
| 2 | L2₹44.4 L+₹94,942.50 (2.19%)Rejected-AOC | L2 | Rejected-AOC Higher bid value | |
| 3 | L3₹45.2 L+₹1.8 L (4.21%)Rejected-AOC | L3 | Rejected-AOC Higher bid value | |
| 4 | L4₹45.5 L+₹2.1 L (4.83%)Rejected-AOC | L4 | Rejected-AOC Higher bid value | |
| 5 | L5₹46.3 L+₹2.9 L (6.64%)Rejected-AOC RANGAPAHAR CROSSING RAILWAY GATE NO 1 DIMAPUR 797 112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L5 | Rejected-AOC Higher bid value |
Tender Value
₹43.0 L
EMD Value
₹85,960
Closing Date
21 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
PROVN OF COVERED AREA WITH FLOOR TILING BETWEEN BOUNDARY WALL AND BLDG NO T-01 DRAINAGE OF RAIN WATER 04X LIGHTS POINT AND 02X CEILING FANS AT 113 MC MF DET AT DIMAPUR ADDN ALT TO CGI SHEET TO GALVALUME SHEET ROOF AND MISC BR WORK OF BLDG NO T40 IN
2023_MES_611898_1
8570/C/E8
Open Tender
Civil Works
Item Rate
180 days
RANGAPAHAR
CLASS D, CATEGORY a(i )
2 documents required · 2 mandatory
₹500
Yes
GE 868 EWS
₹85,960
28 Sept 2023
3 Aug 2023
23 Aug 2023
3 Aug 2023
21 Aug 2023
16 Aug 2023
3 Aug 2023 - 10 Aug 2023
Amount
Dismantling of Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings etc complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness,including Nanital or similar pattern roof covering etc complete all as specified and directed.
Dismantling wall and ceiling boards (fibre pulp insulation etc) or insulation boards, slabs, blankets any thickness, incl cover fillets etc complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed.
Dismantling of framed work timber scantling 40 Sq cm and over in section in any position etc complete all as specified and directed.
Dismantling of frame work timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section ® etc complete all as specified and directed.
Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing etc complete all as specified and directed.
Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches etc complete all as specified and directed.
Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws etc complete all as specified and directed.
All as per Item No-11 here-in-above but plain sheet as in ridges, roof covering or in cladding etc complete all as specified and directed.
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer board E-Board Classic etc complete all as specified and directed. Note:- Grid shall be Measured and paid separately.
S&F size of grid 605 x 605 mm GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre etc complete all as specified and directed.
M&L for preparation of new wooden surface exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and directed.
All as per Item No 15 here-in-above but applying one coat on old surfaces etc complete all as specified and directed.
M&L for Second class clean sawn hardwood in scantling fixed in timber framed work etc complete all as specified and directed.
M&L for Plain fillets, square, rectangular or triangular in section, clean swan, secured with nails or breads sectional area exc 3 sqcm but not exc 6 sqcm etc complete all as specified and directed.
Supply and fixing in repair 0.71 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc in walls, ceilings, stanchions, beams etc, including all laps cutting and waste etc complete all as specified and directed.
S&F Welded steel wire fabric weight not exc 4.00 kg per Sqm ,complete to wood or steel members etc complete all as specified and directed.
M&L for rendering 15 mm thick cement plaster in CM (1:4) on brick work/concrete surfaces finished even and fair with and including WPC @ 2% by weight of cement content and without using extra cement etc complete all as specified and directed.
Material and labour for rendering 15 mm thick plaster in CM (1:4) with and including using water proofing compund @ 2% by weight of cement content on one side of lathing finished even and smooth with out using extra cement etc complete all as specified and directed.
Material and labour for rendering 15 mm thick plaster in CM (1:6) on other side one side of lathing finished even and smooth with out using extra cement etc complete all as specified and directed.
S&F for joist, channels, angles, or tee sections, fixed independently, without connecting plates, etc, (cut to ordinary lenght i.e. Within 20mm of the lenght indicated conforming Fe-410-W (Gde E-250 quality -A) etc complete all as specified and directed.
S&F Rolled sections as in roof truss, purlins including cleats GDE Fe 410-0-or Fe 310-0 etc complete all as specified and directed.
S&F plates (plain or chequered) channels. Square cut or notched ) (ordinary and counter sunk) forming holes, without any attachment, Fe 410-W etc complete all as specified and directed.
S&F bands, straps or stays , plain angle cleats or flat irons cleats or securing purlins to wooden trusses or rafters, knee pieces and similar small articales etc conformings to Fe-290 Grade E-165 complete all as specified and directed by Engr-in-charge.
S&F mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other end to be fitted with washer and one hexagonal or squre nut n exc 15cm long 12mm dia etc complete all as specified and directed.
M&L for applying two coats of OBD on new plastered surfaces of walls over a coat of chalk white primer including preparation of newly plastered surfaces etc complete all as specified and directed.
M&L for applying two coats of Cement base paints on new plastered surfaces of walls over a coat of chalk white primer including preparation of newly plastered surfaces etc complete all as specified and directed.
M&L for applying one coat of OBD on old plastered surfaces of walls including preparation of old plastered surfaces etc complete all as specified and directed.
M&L for applying one coat of cement base paint on old plastered surfaces of walls including preparation of old plastered surfaces etc complete all as specified and directed.
M&L for applying two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any des-cription, over 10cm in width or girth, not otherwise described etc complete all as specified and directed.
All as per Item No 33.00 here-in-above but on old surfaces etc complete all as specified and directed.
M&L for preparation of new steel surfaces of any description, n exc 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer etc complete all as specified and directed.
M&L for preparing new plaster surfaces of wall and applying three coats of white wash on walls etc complete all as specified and directed.
M&L for Virified Ceramic tiles (Light shade) 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc. laid over and including screed bed of 15 mm thick in CM (1:6) etc complete all as specified and directed.
All as per Item No 37.00 here-in-above but in vertical surfaces such as skirting over and including backing coat of 10 mm thick in CM 1:4 etc complete all as specified and as directed.
S&F steel work in Grills, Gates etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 etc complete all as specified and directed. Note:- The cost of making the semi-circular structure is deemed to be included in the rate quote.
S&F steel work in tubular trusses including (purlins and rafters) special shaped washers etc complete using ERW or induction butt welded tubes etc complete all as specified and directed.
M&L for Aplying two coats of synthetic paint (anticorrosive paint) on steel surfaces over a coat of primer including preparation of Surfaces of any description, over 10cm in width or girth,not otherwise described etc complete all as specified and directed.
Supplying, fabricating and fixing wall cladding (for all height) of aluminium composite panel in metallic/ non metallic colour of approved shade made out of 3mm thick aluminium composite panel material consisting of 2mm thick mineral core sandwiched between two aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with kynar 500 based PVDF/Lumiflon based fluoropolymer resin coating of approved colour and shade on exposed face and polymer (service) coating on other face, fixed over and including base frame fabricated with aluminium square pipe of size 25mmx20mm with 1mm wall thickness in 600mmx600mm size grid including stainless steel screws, nut, bolts, washers, cleats, weather silicone sealent for groove filling, backer rods etc, complete all as per Manufacturer instruction etc complete all as specified and directed.
Excavation in trenches, n.exc. 1.5m wide and n.exc. 1.5m in depth for foundation etc. or for shafts, wells cesspits, manholes, pier holes etc. n. exc. 10 Sqm on plain and n.exc 1.5m depth and getting out soft/disintegrated rock etc complete all as specified and directed.
Surface Excavation not exceeding 30Cm deep in any type of soil etc complete all as specified and directed.
Excavation in post holes (or similar holes) each n. exc 0.50 m and getting out ,in soft/disintegrated rock etc complete all as specified and directed.
M&L for PCC (1:4:8) type D-2 using 40mm graded stone agg as in foundation filling & mass concrete etc complete all as specified and directed.
M&L for PCC (1:3:6) type C-2 (using 40mm graded stone agg) as in foundation, filling and mass concrete etc complete all as specified and directed.
M&L for RCC (1:2:4) Nominal mix, Type B-1 using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; base for columns, etc.; basement slabs, unde-reamed piles and mass concrete etc complete all as specified and directed.
M&L RCC (1:2:4), Type B-1 using 20 mm graded stone aggregate, Nominal mix as in coloums, pillars, piers, posts and struts etc complete all as specified and directed.
M&L RCC (1:2:4), Type B-1 using 20 mm graded stone aggregate,Nominal mix as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies ,canopies, deck slabs and in shelve and like etc complete all as specified and directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips etc complete all as specified and directed.
All as per item No. 51 here-in-above, but 5mm dia and over upto 10mm dia as in stirrups, spacers and binders etc complete all as specified and directed.
Material and labour for brick work with sub class `B` bricks, old size burnt bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) etc complete all as specified and directed.
M&L for brick work with sub class B bricks(using old size burnt bricks) straight or curved on plan to any radius in half brick thick walls built in CM (1:4) etc complete all as specified and directed.
M&L for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in coping/benching incl necessary form work etc complete all as specified and directed.
M&L for Rendering (screed bed) 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) to receive tiles etc on verticle surfaces of walls etc complete all as specified and directed.
M&L for Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) to receive tiles etc on ceiling surfaces of walls etc complete all as specified and directed.
M&L for Glazed earthenware coloured tiles 200mmx100mmx6mm thick, in verticle surfaces, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed.
M&L for formwork to sides and soffits of concrete foundations, footings, bases of columns, and plinth beams and similar work, etc complete all as specified and directed.
M&L for formwork to the sides of columns for fair finished surfaces of concrete etc complete all as specified and directed.
M&L for formwork to soffits of suspended slabs, floor slabs, landings and similar work etc complete all as specified and directed.
Returning filling and spreading, leveling wartering and well ramming in layer n.exc 25cm in soft/ disintegrated rock etc complete all as specified and directed.
Removal of excavated soil n.exc. 50m and deposited where directed at level n.exc. 1.5m above the starting point in soft/ disintegrated rock etc complete all as specified and directed.
M&L for hard core with broken stone over rammed earth gauge n.exc 63 mm deposited, spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surfaces etc complete all as specified and directed.
M&L for 100mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base etc complete all as specified and directed.
M & L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in sub base, surface finished fair and even etc complete all as specified and directed.
M&L for 40 mm thick PCC type B-1, (1:2:4) (20mm graded stone aggregate) as in floors, Finishing cement concrete surface even and smooth using extra cement etc complete all as specified and directed.
M&L for 100mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in hard standing finished even and smooth without using extra cement etc complete all as specified and directed.
M & L for forming 12mm thick & 150mm deep expansion Joint sfilled with pre formed bituminous filler and top 30mm primed and sealed with sealing compound Grade 'B' etc complete all as specified and directed.
M & L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'B' etc complete all as specified and directed.
M & L for Machine pressed precast concrete interlocking paver block of any colour any shape and size conforming to IS 15658-2006 of rubber moulded 60mm thickness, M-35 Grade with grey cement and pigment etc complete all as specified and directed.
M & L for 25mm thick Sand filling under floors or in foundation including watering and consolidation etc complete all as specified and directed.
M&L for Precast factory made manhole cover/Drain covers with plain faces using RCC (1:2:4) type B-1 and set in CM 1:4 including formwork etc of required sizes etc complete all as specified and directed.
M & L for chequered cement concrete tiles of size 20x20x25 mm thick laid with grey cement and pigment set jointed and pointed in neat cement slurry, in floor etc complete all as specified and directed.
S&F 100 mm UPVC half round Pipe (SCH-40) including all necessary fitting etc complete all as specified and directed.
Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as specified and directed.
M&L for Point wiring complete with 1.5 Sqmm single core PVC insulated cable, with multi stranded copper conductors FRLSH 1100 volt grade, drawn through and including PVC casing and caping with all conduit accessories and making good to the disturbed surfaces of walls, ceiling, floors etc. to match with the existing surface ) and including provision of 1.5 Sqmm FRLSH PVC insulated copper cable as earth continiuty conductor connected to common earth dolly complete with PVC switch board for fixing switch socket etc as specified and as directed.Make:- Finolex/Richa/RR Kabel Make of caping/casing & PVC boxes :- Prestoplast/Finolex/supreme/Richa
(a) One light/Call bell point controlled by one, one way switch .
(b) One Exhaust/Ceiling fan point controlled by one, one way switch.
(c) One 3 pin socket outlet 5 Amps on the same board with other switches.
(d) One 3 pin socket outlet 5 Amps on the Independent board.
All as per item No- 77.00 here-in-before but with 2.5 Sq mm for 3 pin 16 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly etc complete all as specified and as directed.
S&F for Switch piano flush type single pole, one way 5A complete all as specified and as directed. Make :Anchor/Havells/Legrand
S&F for Socket outlet, 2 in 1, 3 pin 5A flush type complete all as specified and as directed. Mcomplete all as specified and as directed. ake :Anchor/Havells/Legrand
S&F for Switch socket combination 2 in 1, 6A flush type complete all as specified and as directed. Make :Anchor/Havells/Legrand
S&F for Switch socket combination 2 in 1, 6A/16A, 5 in 1 flush type complete all as specified and as directed. Make :Anchor/Havells/Legrand
S&F for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed.Make :Anchor/Havells/Legrand
S&F for stepped type electronic fan regulator 100 watt socket size flush type on the existing phenolic laminatied sheet complete all as specified and as directed. nchor/Plaza/SSK
M&L for sub main wiring with two runs of 4.00 Sq mm and one run of 4.00 Sq mm for earth wire with multi stranded copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- Two runs of 4.00 Sq mm + one run of 4.00 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length.
S&F for, LED light fitting 1 x 20 W (4 FT), wall /surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in & incl flexible house from ceiling rose to fitting complete all as specified and as directed. Make : Havells/Bajaj/Philips/CG
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with bushless direct current motor (BLDC) complete all as specified and as directed.Make : Usha/Bajaj/CG
Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 20 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting complete all as specified and as directed.
M&L for MCB Distribution board double door type SPN 4 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed. :- Legrand Cat No 507611 or equivalent in ABB/Siemens
M&L for MCB SPN 32 Amps 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB complete all as specified and as directed. Legrand Cat No 408617 or equivalent in ABB/Siemens
M&L for MCB SP 6-32 Amps 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB complete all as specified and as directed. Make:- Legrand Cat No 408587-95 or equivalent in ABB/Siemens
das enterprises
M/S Lucky Builders
TOSHIKA SUMI
SHRI MADAN SINGH
M/S ABHISEK TRADING COMPANY
M/S SANGITA TRADERS
M/S RAHUL TRADING CO.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .