Providing and Fixing of River Wash Kota in Footpath at Devka Garden, Nani Daman

Amount

Civil work

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc.

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations, land scaping features, development work etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering. Item shall be also consider for crating mounts in gardening work.

Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable materials (B) By manual in area of thorny jungle

Providing material and labour for Filling in plinth under floors or base of foundation / open areas as per architectural requirement with sand including watering ramming, consolidating and dressing etc complete as directed by Engineer in charge.

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

Providing material and labour for laying Plain cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6- crushed stone aggregates 20 mm nominal size) in Foundation, Plinth and development work including cost of formwork, compacting, finishing, curing etc complete for all level, all height/ depth as directed by engineer in charge.

Providing Thermo Mechanically Treated bar (T.M.T.) Fe-500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level. including providing fusion bonded epoxy coating not less than 175 micron thickness and upt o 300 micron to reinforcement bars as per IS-13620-1993/ASTM-775 M including testing of coating at plant and all taxes. (A) 10 mm to 16 mm dia bar.

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401

Providing material and labour for laying average 25 mm thick machine cut polished Green kota stone slab of size upto 1.5mt length with uniform thickness for tread, window jambs & sills, coping over 20 mm (average) thick base of cement mortar 1:6 (1 cement : 6 coarse sand) laid over and jointed with gray cement slurry including pencil sharped exposed edges, polishing, rubbing, curing, finishing, buffing after final polishing, maintaining upto handling ovre the project etc complete as directed by engineer in charge. All Expose edges of stone shall be pencil sharped and in even thickness and polished at all floors any heights, any lead and lift etc complete. as directed by Engineer Incharge. Sample and mockup shall be approvd before procurement of material.

Grass Paver/Grid Paver Providing and laying grey/non colored grass paver blocks (grid paver) of high density 75 mm thick M-30 grade of approved make. Grid paver shall be laid on existing levelled good soil Including 40 mm thick average FYM Soil filling and approved quality lawn in gap of grid paver. Laid paver block shall be mechanically compacted. The work of the paving blocks shall be executed in line and level by skilled mason of flooring work only. Cutting of paver block by machine cut only and laying to be done by skilled flooring mason. Paver blocks shall be compacted and shall be re-laid if necessary. (Cost of FYM soil and lawn shall be paid separately).(Make -Vyara)

Providing material and labour for layin Coursed rubble masonry with stone of approved quality in foundation, plinth and other development work in Cement Mortar 1:5 (1-Cement : 5-coarse sand) etc. complete. in any shape and thickness including finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge

RAJRATH CONSTRUCTION (BID ID -8743)