NAYA GAON KANSAL CW

Amount

Construction of pump chamber 3.05x3.70 mtr has been proposed at site including cost of electrical wiring sanitary installation as per public health standard with toilet outside th pump chamber.

Partially Constructied pump chambers 3.70x4.30 mtr at site as per following details Complete in all respect.

12.5mm thick plaster in 1:4 under side of ceiling

Pump chamber

Hollock wood cup board shutter with plywood panels or faced on both side fixed in position (excluding the cost of handles, bolts hasp with staple but including the labour for fixing them)

30mm thick Cup Board

Kiln seasonal Hollock wood cup board chowkats including iron hold fasts, iron hinges corner straps, wooden knobs or handles fixed in position (Size 45 x 60mm).

30mm thick Cup Board

Applying Pink Primer or-aluminium priming coat including preparation of surface With special quality paint

For Door, Ventilator ,Windows & Cup board

Painting two coats excluding priming coat with ready mixed paint in all shades on new wood work With special quality paint

Applying priming coat with methal primer on new steel or iron work incluing preparation of surface and Painting two coats with ready mixed paint for metallic surfaces in all shades on steel or iron work with special quality paint.

For Grills in windows & ventilator,R.S. Joint on roof

Steel work, fixed independently without connecting plates, including cutting, hoisting and fixing in position

R.S. Joist

White washing 3 coats inside of pump chamber.

Finishing wall with exterior decorative cement based paint such as snowcem robbiacem etc. on new work in two coats to give even shade.

Providing and fixing of Glass strips 4mm thick in floors

50mm wide

40mm wide

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of Paris and chalk mitti including finishing the surface to the required finish complete. Inside pump Chamber.

Distempering with dry distemper of approved manufacture two coats over one priming coat to give an even shade.

Supplying & fixing glass panes with glazing clips and special metal sash puttyof approved make.

Glass panes 4mm thick above 0.40 sqm area.

Ventilator & Windows

RECESSED CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES:

Wiring in PVC insulated copper conductor single core FRLS cable (ISI marked), 1100volts grade to be laid in heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for having electronic fan regulators (socket size), bell push, electronic buzzer, 3pin 6Amp., 3pin 16/20 Amp. Sockets and 6 Amp./16/20Amp. Swithces (flush piano type accessories) etc.and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., & including the cost of flush piano type switches/sockets, step type electronic fan regulator 100 watts, PVC connector (For Fan Box andElectronic Buzzer), PVC Bush, Steel Hooks, Circular Inspection Box (Recessed Type and Deep Type) conduit pipe & copper wire and other petty material etc. including the cost of cutting and filling up of chases:-

Wiring fan point without fan box in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts (socket size).

Wiring light point in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade.

Wiring 3 Pin 6 Amp. Plug control comprising wall socket and switch including bonding to existing earth with PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1 sq. mm, 1100volts grade complete.

Wiring 3 pin 16/20 amp. power plug control and switch.

GALVANIZED IRON PIPES AND G.I. EARTHING:

Supply & erection of G.I. pipe for wiring purposes including Bends, inspection boxes etc., where necessary including Painting as per PWD General Specifications 2010:-

Earthing of Sheet metal/ iron clad Switches and metallic cases etc., with No. 7/12 S.W.G. (7/2.80mm dia.) G.I. wire in 20mm dia G.I. pipe partly recessed and partly on surface complete with 135cm long 50mm dia. G.I. earth pipe with G.I. reducing socket (50mm x 20mm) including erection of the same, 10 metre below ground level with necessary charcoal & salt mixture etc., up to 13 metre in length (including boring & refilling).

Providing and fixing ceiling fan of reputed quality such as crompton/Usha/Polar or equivalent of 56 inch size with regulator.

Providing and fixing LED Tube Rod set of reputed quality such as Philips/Salvania Laxman or equivalent. Full size

Providing and fixing LED bulb with holder of reputed quality such as Philips/Salvania Laxman or equivalent. Full size

Construction of toilet outside pump chamber complete in all respect

Provinding & installing, testing & commissioning one No. electronically actuaed, Diaphragm operated, metering system , Chemical dosing Chlorinator, suitable for delivering 0.5 to 6 litres of bleaching powder solution/sodium hypo solution per hour under maximum delivery pressure upto 7 kg cm², and suction lift not less than 1.5m, as per DWSS standard specifications

Construction of masonry sluice valve chamber size 0.60m x 0.60 m as per standard Drawing D-13 & Analysis A-13

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department of Size 0.9m x 0.9m

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).

80mm i/d Sluice Valves flanged

Providing, Stringing out PVC pipes as per ISI-4985 (ISI marked with prior approval of Engineer in charge )casting along the Trenches and laying the same in Trenches To correct alignment and gradients, cutting. Jointing and testing, including excavation & specials. Complete in all respect (MANUAL)

PVC pipe 110 mm o/d 6 kg/cm²

PVC pipe 90 mm o/d 6 kg/cm²

Supplying and fixing of ISI Marked CI D-joint (complete with nut, bolts & rubber ring) as per IS:8794 for repair of pipe line including cutting , jointing and testing etc. but excluding cost of excavation complete. (CSR 28.10 )

Dismantling of concrete interlocking pavers and relaying of old pavers with coarse sand base using old pavers where required 80 mm thick factory made cement concrete interlocking pavers complete as per directions of engineering incharges