Construction of Training Hall and Digital Library at Jharsuguda Forest Division Office

Brick work with Fly ash Bricks in cement mortar (1:6) in super structure having crushing strength not less than 75.00 kg/cm2 immerging the bricks in water not less than six hours before use in masonary. all complete as per the specification and direction of Engineer-In-charge For wall, Mummty Wall,Parapet wall

Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position for Roof

Supplying, straightening, cutting, bending, placing in position and binding reinforcement steel work in RCC/reinforced brick works as per drawing and specification including preparation of respective bar bending schedule and binding (Binding wire to be used as per the IS code) etc. all complete as per direction of Engineer-in charge.Cold Twisted bars, Thermo-Mechanically-treated bars for slab

Providing, fabricating,transporting,assembling & erection in position of steel members for steel columns,builtup beams using structural tubular sections (TATA, SAIL, JSL, APL Apollo) (round, square or rectangular hollow tubes etc. confirming to IS 4923/ IS 1161, yield strength 310 Mpa as per latest IS code) to the required profile & shape as per the drawing & specifications. This item also includes the shear connectors/ Studs & fusion weld to top of horizontal member. This item also includes preparation of shop drawings & their approval, necessary templates, adequate temporary supports, scaffolding & staging all cutting, grinding, sliding & all labour, tools , plants & equipments & operations etc. required to complete the job as per drawing & specification every precaution to be taken to prevent rusting of sections. This item also includes all test on materials & welded fabricated parts as per specifications & direction of Engineer In Charge for floor,facade works,louvers,Service Ladder & add for HSFG nut & bolts

Fixing G.C.I. Sheet (Dura shine, Coloured sheet) in roof drilling holes in wind ties including fixing of ridges valleys wind ties etc. including cost of fitting per 1 Sqm (Vide AR-125/32) 0.50 mm thick with zinc coating not less than 275 gm/m² and Add for Edge Cover

12 mm cement plaster on external smooth side of RCC/brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. all complete as per the specification and direction of Engineer-In-charge for Mummty Wall, Parapet wall

Supplying & Fixing Granite tiles 10mm thick in floors/ platform trades or steps and landing on 20 mm thick bed of Cement motar 1:4 Jointed with neat cement slury moxed with pigment to match the shades of the tiles including rubbing and polishing including cost of all meterials etc. complete for Toilet Floor, Pantry Thresholds

Supplying, Fitting, Fixing Vetrified Tile (600 x 600) or (1200x600) coloured /Printed series (Homogenous) of approved make confirming to IS 13755 in floors treads or steps and landing laid on 25mm thickbed of cement mortar1:4(1cement : 4sand) filling joints with white cement of approved quality including cost of all materials labour T & P etc required for the work all complete as per direction of Engineer in Charge. (For New Work Only) for floor, Toilet/Pantry Walls, Add for skirting

Supplying, fitting, fixing up window (sliding type) made up aluminum Section 9778, as windows frame section No. 4095, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-incharge for Ventilator

Providing and fixing of fixed 12mm thick ST167 toughned glass Glazing with part Top hung of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6 mm thick "D" quality, galvanized as per IS-277 with zinc of 120 Gm/Sq.mtr) with paint pecification being with primer of 5-7 microns and finished paint with polyster paint (Black/Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed headings are of 18x25 mm for outside

Providing and fixing in position, prefab 150mm thick factory made polyurethane foam (PUF) wall/ roof/ floor panals made of 0.05 mm plain profile JsW/Jindal/TATA PPGL Sheet white color in both the directions and on both faces of panel, The PUF core shall consist of 150mm thick PUF of density not less than 40kg/ per cum with closed cell content +93% and Fire performance DIN 4102 including all the accessories. Fixing operations of wall/roof/floor panels shall be completed in all respect as per drawings and specifications and under the overall direction of the Engineer-in-charge for outside

Providing and fixing M.S grill of required patterns for windows/verandahs etc. with M.S flats, square or round bars etc. including applying a coat of approved steel primer and two or more coats of synthetic enamel paint of approved make & shade, all complete as per drawing & specification. (All steel sections contractor's own supply) for Chanel

Providing & Applying priming coat with Cement primer of approved brand and manufacture on plaster surface as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete for exterior

Wall painting 2 coats with weather coat of approved shade on new work over a coat of primer to give an even shade including cost of paint. For exterior

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surfaces to prepare the surface even and smooth as per the instruction of Engineer-In Charge at all elevations including all material & labour complete for Inside, above glass work

Providing & painting two coats of Plastic emulsion paint with 1st quality of approved brand and manufacturer to give an even shade as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete for inside, above glass work

Providing & Painting with synthetic enamel paint of approved brand and manufacture to give an even shade as per the instruction of Engineer-In-Charge at all floors and all heights including all material & labour complete for Roof, Column/Beams, Façade

Providing and laying grading conc. 25 mm (avg. thickness) cement concrete of required slope of mix 1:2:2 (1cement:2sand:2 graded stone aggregate of 10 mm nominal size) mixed with approved water proof compound as per manufacturer's specification on top of slab including cement slurry, all complete, including the cost of water proofing admixture, which should be approved by the Engineer-In-Charge prior to material procurement by the contractor for Gola/haunch

Providing waterproofing for Toilet/SukenSlab:- Cleaning the inside surface & & Application of two coats of Perma/sika Top seal 109 hi @ 2.2 Kg/Sqm & Perma/Sika Fab-1 to the battom slab & side wall surface to protect against leakage & seepage finally covered with a cement mortar (1:4). Proper care should be taken to fill the pipe penetration points with sikagard 694 fi (moisture resistant epoxy putty) complete as per manufacture specification and direction of Engineer-In-Charge at all floors and all heights. Brand - Perma/Sika or equivalent for Roof

Please Enable Macros to View BoQ information