Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.3 LAccepted-AOC 135 CHAKRANA TIWARI CHAKA NAINI PRAYAGRAJ 211008 UTTAR PRADESH | PRAYAGRAJ | UTTAR PRADESH | 211008 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹21.0 L+₹1.1 L (5.40%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹21.9 L+₹2.0 L (9.94%)Rejected-Finance 11 1 7 P D KYDGANJ PRAYAGRAJ U P PIN 211003 | PRAYAGRAJ | UTTAR PRADESH | 211003 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹22.9 L+₹3.0 L (14.9%)Rejected-Finance 22B HEMILTAN ROAD GEORGE TOWN PRAYAGRAJ UP 211001 | PRAYAGRAJ | UTTAR PRADESH | 211001 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹25.0 L+₹5.1 L (25.7%)Rejected-Finance DEHRADUN | L5 | Rejected-Finance Other than L1 |
Tender Value
₹38 L
EMD Value
₹76,000
Closing Date
11 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST PRAYAGRAJ
GE WEST PRAYAGRAJ PIN-211001
REPAIR AND MAINTENANCE OF B/R WORK IN MD ACCN AT CHHEOKI.
2023_MES_603888_1
8651/E8
Open Tender
Civil Works
Item Rate
270 days
NEW CANTT PRAYAGRAJ
As per Tender Documents
8 documents required · 8 mandatory
₹500
GE WEST PRAYAGRAJ
₹76,000
Yes
18 Aug 2023
17 Jun 2023
12 Jul 2023
17 Jun 2023
11 Jul 2023
29 Jun 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding( bur not backing) , and removing rubbish off the premises complete all as specified & directed.
Demolition of cement concrete in roofs, floors, beams, staircase, landing,chhajjas,and similar suspended works complete all as specified & directed.
Demolition of brick wok built in cement mortar including all quoins,arches,pillars,etc but excluding ashlar facing, dressed stone work, precast concrete article complete all as specified
M&L for brick work with sub class B; bricks ,straight or curve on plan exc 6m mean radius built in cement mortsr 1:6 complete all as specified and directed
All as per Srl item 04 here-in before but except bricks complete all as specified & directed. Note:- Brick obtained from demolition shall be used.
Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc, complete allas specified
M&L for rendering 15mm thick cement plaster on fair faces of brick work or concrete surface in CM 1:6 finished even and smooth with out using extra cement complete all as specified
M&L for rendering 15mm thick cement plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth with out using extra cement complete all as specified
M&L for glazed ceramic coloured tiles in vertical surface 350x250x7mm/450mm x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement mortar 1:4 finished rough to receive wall tiles etc complete all as specified & directed..
M&L for non skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm but not exc. 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bedding in CM 1:6 complete all as specified and directed
M&L for non skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bedding in CM 1:6 complete all as specified and directed
M&L for glazed ceramic coloured tiles 300 mmx 200 mm x 6 to 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in cement mortar 1:4 finished rough to receive wall tiles etc complete all as specified and directed
M&L for Vitrified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
S&F in repair for bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed.
S &F in repair bib tap 15mm dia, fancy type chromium plated with long shank & cup (concealed type) screwed end for iron pipes or for union and fixed complete all as specified and directed.
S&F in repair 15mm dia bib tap standard of PTMT fancy type any colour, high pressure screwed for iron pipe with minimum weight 105 gms complete all as specified and directed
S&F in repair stop valve angular type 15mm dia, fancy type chromium plated with long shank & cup (concealed type) screwed end for iron pipes or for union and fixed complete all as specified and directed
S & F in repair two way angle valve with wall flange 15mm bore fancy type, quarter turn, cast copper alloy, chromium plated with long shank and cup, screwed both ends for iron pipe or for union complete all as specified and directed
S & F in repair two way bib tap with wall flange 15mm bore, fancy type, quarter turn, brass chromium plated, long body with capstan head and cup screwed down for iron pipe or for brass ferrule including accessories complete all as specified and directed
S & F in repair stop valve copper allowed down, high pressure with crutch or butterfly handles screwed down both ends for iron pipe or for unions, 15mm dia of pipes complete all as specified and directed
S & F in repair stop valve 15mm dia cast copper allowed CP fancy type with long shank and cup(concealed type)screwed down, high pressure with crutch or butterfly handles screwed both ends for iron pipe or for unions, and fixed in pipe complete all as specified and directed
S & F in repair for rubber door seal 32mm wide and 5mm thick with aluminium strip of size 19mm wide and 2mm thick fixed with machine steel screw with washer, complete all as specified and directed
Removing air lock from GI pipe of any size by opening of joints/ fittings and refixing the same after the job is completed all as specified ans directed
S & F in repair of ball valves high pressure of PTMT with epoxy coated aluminium rod& high density plastic ball screwed for iron pipe of 15 mm dia bore( min weight 142 gms) complete all as specified and directed
S & F in repair of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm dia bore (min weight 210 gms) complete all as specified and directed
S & F of center hole basin mixer 15 mm dia bore chromium plated brass with casted swinging spout including plugging and securing to wall, fixed in repair complete all as specified and directed
S & F of 15 mm bore CP wall mixer with telephonic shower with tube and hook, fixed in repairs complete all as specified and directed
S & F for chromium plated brass shower rose 75mm dia with swivel joints fixed in repairs complete all as specified and directed.
S & F in repair for hand shower 120 mm dia (multi function with cascade effect) as per sample approved kept in GE office complete all as specified and directed.
S & F of pillar tap, cast copper alloy with capstan heads, fancy type, chromium plated screwed down high pressure, with or with out lettered 'Hot" or 'Cold' with long screwed shank and fly nuts ,screwed for iron pipe 15 mm bore, fixed in repairs complete all as specified and directed
Repairs to leaking water in pillar taps, stop cock, angle valves, bib taps of any description by replacing the washer complete all as specified and directed
S & F of spindles for 15 mm brass or CP brass stop cocks, bib taps etc. Fixed in repair complete all as specified and directed
Cutting chases , pinning in making good to facing where required for concealed water tubing and making good cutting not exc. 10 cm girth in brick walls complete all as specified and directed
Taking up or down steel tubing and connection 15 mm bore complete all as specified and directed
Taking up or down steel tubing and connection 20 mm bore complete all as specified and directed
S & F of steel water tubing, medium grade, ISI marked galvanised, 15 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed
S & F of steel water tubing, medium grade, ISI marked galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed
S & F of ball valve of PVC flushing cistern fixed in repairs complete all as specified and directed
S & F of PVC handle for low level flashing cistern, fixed in repairs complete all as specified and directed
Repair/ adjustment to washers/ syphon etc. for high or low level flushing cistern any type and any make including replacement of washers, check nuts, plug etc. and making it functional complete all as specified and directed
S & F in repair PVC low level flushing cistern 10 liters capacity, white with all fittings and fixtures including brackets and 32 mm dia bore PVC flush pipe complete all as specified and directed
Repairs to leakage of small fittings , galvanised iron medium grade such as sockets, elbow, nipple for 15/ 20 mm dia bore of pipe complete all as specified and directed
S & F PVC flush pipe 32 mm dia for low level flushing cistern, fixed in repairs complete all as specified and directed
S & F of plastic water closet seat black/ white closed pattern with flat bottom and cover and mild steel chromium plated hinging devices fixed in repairs complete all as specified and directed.
S & F in repair vitreous china wash down water closet pan pedestal pattern white including connection in drain and in flushing pipe complete including 'P' trap or 'S' trap complete all as specified and directed.
S & F in repair vitreous china squatting pan Orissa pattern size 580x440 mm white with integral foot rest fixed in repairs including provision of lime concrete bedding complete and making good to floors all as specified and directed
S & F of flushing jet for pedestal pan pattern WC including flexible pipe and brass chromium plated nuts, fixed in repairs complete all as specified and directed
S & F of PVC connection 15 mm dia and 45 mm long with 2 Nos PTMT nuts, fixed in repairs complete all as specified and directed
S & F of grating doom 125 mm dia with waste hole of PTMT (min weight 40 gms) fixed on floor/nahani trap with cement mortar, fixed in repairs complete all as specified and directed.
S & F of PVC waste pipe 32 mm dia 60 cm long for WHB with cup, fixed in repairs complete all as specified and directed.
S & F of PVC waste pipe 40 mm dia 60 cm long for WHB with cup, fixed in repairs complete all as specified and directed.
S & F in repairs 75 mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and directed
S & F of sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, fixed in repairs complete all as specified and directed
S & F of extruded aluminium alloy handle, fabricated type anodised 125 mm size fixed in repairs complete all as specified and directed.
S&F of aluminium anodised barrel tower bolts of extruded section 150 mm long, fixed in repairs complete all as specified and directed.
S&F of aluminium anodised barrel tower bolts of extruded section 100 mm long, fixe d in repairs complete all as specified and directed
S&F of aluminium alloy, anodised sliding door bolt 300 mm long, with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts & extruded sections or cast aluminium alloy, fixed in repair complete all as specified and directed.
S&F of butt hinges medium weight cold rolled mild steel 100 mm size fixed in repairs complete all as specified and directed
S&F of butt hinges medium weight cold rolled mild steel 75 mm size fixed in repairs complete all as specified and directed
S&F of vitreous china wash basin, white flat back type of size 550x400 mm including brackets, cutting for and pinning in ends of brackets in CM 1:3 including 32 mm dia chromium plated waste coupling 32 mm dia 450 mm long waste pipe complete all as specified and directed
S&F of hasp and staple 125 mm size safety type, aluminium anodised including bolt to hinge plate, fixed in repair with screws complete all as specified and directed
S&F of 300 mm long mild steel sliding door bolts in repair plate type stove enameled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed in repairs complete all as specified and directed.
S&F in repair MS barrel tower bolts of extruded section 200 mm long complete all as specified and directed.
S&F of aluminium handle cost type anodised 150 mm size fixed in repair complete all as specified and directed.
S&F of galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanised wire staples, fixed in repairs complete all as specified and directed.
S&F of floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel fixed in floor with over all length of cover plate 140 mm fixed in repair complete all as specified and directed.
Hacking out old broken glass ( any thickness size, quality or description) from wooden/ steel frames glazed with putty or fixed with wooden beads/ metal pins complete all as specified and directed.
S& F of sheet glass 4mm thick ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane complete all as specified and directed
All as per Srl item No. 69 but except sheet glass any type complete all as specified and directed.
S& F of figured glass pin head type 3mm thick ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane complete all as specified and directed.
M&L for securing glass of any description in existing wooden frame/ metal frame glazed with putty/beads including removing loose or decayed putty/beads, painting/oiling one coat on rebate,grooves,reputtying and painting/oiling puttied surface to match existing work complete all as specified and directed.
S&F of Tubular towel rail brass chromium plated , 20mm dia 'D' type, 60cm long between flanges, fixed in repair complete all as specified and directed.
S&F in repair 300 mm ordinary rat tail rod pattern springs of brass including roller and roller plate fixed complete all as specified and directed.
S&F of steel window handles left/right and peg stay including welding to base plate, pin and handle/brackets fixed in repair complete all as specified and directed
S&F of 25 mm dia MS PVC coated drapery rod with bright polish of superior quality including final accessories etc fixed in repair complete all as specified and directed
S&F of 25 mm dia brass fancy type single bracket fixed with PNC gutty and screws, fixed in repair complete all as specified and directed
S&F of galvanised iron medium grade reducer socket 20x15 mm, fixed in repair complete all as specified and directed.
S&F of stainless steel plate rack (utensil rack) of size (600mmx750mm ) and depth 300 mm made with 0.63 mm thick stainless steel sheet provided with brass screw including necessary fittings nut/ bolts fixed in repairs complete all as specified and directed.
Welding at site in position MS butt hinges and projecting type hinges exc. 2.5 cm but n.exc. 5 cm in length and thickness of metal to be welded n. exc. 6mm thick complete all as specified and directed.
S&F in repair for 18 mm thick prelaminated MDF board, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work as in cup boards etc. complete all as specified and directed
Fixing only in repairs loose existing pelmet boxes by embedding wooden guties in cement mortar 1:3 with MS clips and screws etc.(length of pelmet boxes n. exc. 1.5m ) complete all as specified and directed.
S&F of PVC (SWR) pipes, single socketed, in any length with rubber ing joints, fixed to wall 110 mm bore fixed in repair complete all as specified and directed
S&F of PVC (SWR) bends any radius, 110 mm bore fixed in repair complete all as specified and directed
S&F in repairs rotational moulded, multilayer HDPE water storage tank of 500 ltrs capacity( cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos ,20 mm dia full threaded GI tank niple,20mm dia brass ball valve with epoxy coated aluminium rod with high density plastic float ball ( of minimum weight 210 gms) including fixing of inlet, outlet and over flow pipe etc. complete all as specified and directed
S&F in repairs rotational moulded, multilayer HDPE water storage tank of 1000 ltrs capacity( cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos ,20 mm dia full threaded GI tank niple,20mm dia brass ball valve with epoxy coated aluminium rod with high density plastic float ball ( of minimum weight 210 gms) including fixing of inlet, outlet and over flow pipe etc. complete all as specified and directed
S&F in repair CP toilet paper holder brass chromium plated as per sample kept in GE office complete all as specified and directed.
S&F in repair CP soap dish as per sample kept in GE office complete all as specified and directed.
S&F of stainless steel sink 1.0mm thick with drainage board for kitchen with plug waste pipe washers including cantilever cast iron bracket connecting union over all size 915mm x460 mm with bowl size 410mmx 330mmx160mm fixed in repair complete all as specified and directed
S&F of health faucet including PVC pipe with brass nuts for EWC fixed in repairs complete all as specified and directed.
S&F in repair door closer hydraulically regulated made up of aluminium extruded section body universal type, suitable for door shutters of 851 to 1000 main width complete all as specified and directed.
S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box ,main body with stainless steel cover, governing pivot made of brass other part made of mild steel heavy duty fixed to aluminium doors complete all as specified and directed.
S&F in repair steel lock fixed brass 2-lever of size 100 mm to aluminium doors complete all as specified and directed (Make- Godrej/ link)
M&L for refixing aluminium shutters of any description exceeding 1 sqm and not exc. 2.5 sqm each in the same opening after taking down ,easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete all as specified and directed
S&F in repair chromium plated towel ring fixed with screw to wall complete all as specified and directed
S&F of ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed
S&F in repair PVC cabinet mirror coloured of size 300x450mm fixed with screw and PVC gutty on wall complete all as specified and directed
S&F of aluminium alloy, anodised sliding door bolt 200 mm long with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
S&F of aluminium anodised barrel tower bolts of extruded section 150mm long fixed with screws complete all as specified and directed
S&F of aluminium anodised handle of extruded section 100mm long fixed with screws complete all as specified and directed
S&F of MS bends straps, support, or stays for rain water pipe, ventilating pipes including bolts, if required hook(stay),heavy for large gates hook and pestle hinges, large hasp and st hold fasts or similar articles conforming to Gde-290 E 165 complete all as specified and directed
S&F of 100 mm long polished hard wood handle fixed with screws complete all as specified and directed
S&F of ply wood 6 mm thick 5 ply grade BWP, type BB ,fixed with screws to timber frame work complete all as specified and directed.
S&F in repair telescopic basket( channel) 18"/20" length extruded stainless steel over rollers of approved make complete all as specified and directed.
Welding at site in repair at any position and any description exc. 2.5 cm but n.exc. 5 cm in length and thickness of metal to be welded n. exc. 6mm thick complete all as specified and directed.
M&L preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint on new wooden surfaces of any description over a coat of primer complete all as specified and directed.
Form work to sides and soffits of floor or roof beams, beam haunching,girders, bressummers, lintels, cantilevers, shelves, including support, overhangs etc complete all as specified and directed.
Form work to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20 cm wide all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame not exc 1.5 Sqm each all as specified and directed
Taking down chowkats or frames with shutters (without taking off shutters from the frame exc 1.5 Sqm but not exc. 4.0 Sqm each all as specified and directed
Resecuring with out taking down chowkats or frames with shutters (without taking off shutters from the frame not exc 1.5 Sqm each all as specified and directed
Resecuring with out taking down chowkats or frames with shutters (without taking off shutters from the frame exc 1.5 sqm but not exc 4.0 Sqm each all as specified and directed
Taking down shutters of any description not exc.1 Sqm each all as specified and directed
Taking down shutters of any description exc.1 Sqm not exc. 2 Sqm each all as specified and directed
Taking down shutters of any description exc. 2 Sqm each all as specified and directed
Resecuring or easing& adjusting without taking down of shutters exc. 1 Sqm but not exc 2 sqm each complete all as specified and directed
Resecuring or easing & adjusting without taking down of shutters not exc. I sqm each complete all as specified and directed
Dismantling of wall panelling and similar work complete all as specified and directed
S&F of solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.
S&F of factory made solid panel PVC door shutter 30mm thick (style) consenting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails& bottom rail on either side & as gap insert for top rail& bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the style and rail with suitable PVC sheet, beading and joined together with solvent cement supplying and fixing in the frame at site as sper specification & drawing complete all as specified and directed.
S&F 2nd class hard wood as in plain solid, straight chowkats and frames,wrought,framed rebated on the solid, rounded, or chamfered, put together with glue pinned at joints complete all as specified and directed.
S&F of 2nd class hard wood glazed and skeleton shutters 35 mm thick , open rebated and prepared to receive glass, gauge, etc,(without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass, etc. Sizes of members of shutters as specified in SSR part -I section 8,clause 8.24(a) complete all as specified and directed.
S&F of 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F of framed work such as grills, gratings, etc. with ends of bars shouldered and /or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk way, railings ,framework of water tanks and similar works conforming to Fe-290 gde E-165 complete all as specified and directed.
S&F of mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mils steel wire (annealed) not less than 0.90mm dia & securing with clips complete all as specified and directed.
All as per Srl item No. 125 above but 6 to 8mm dia complete all as specified and directed.
Dismantling structural steel work including doors, gates etc complete all as specified and directed.
S&F of framed work as in doors or gates of angle or other section with gusset plates,rails,braces etc complete, drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with hinges or steel hanging door fittings or other covering running rails and guide and fastening and fixing complete all as specified and directed.
S&F in repair of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
M&L for cement concrete type B-1 (20 mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth cources, string cources, lacing cources, parapets and railing upto 60cm in height, copings, lneelers, aprx stones, bed plate, kerbs and likes slightly rounded or chamfered complete all as specified ind directed.
M&L for cement concrete type B-2 1:2:4 ( 40mm graded aggregate) as sin surface channels and drains all as specified and directed.
M&L for providing cement concrete type B1 using 20mm graded aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete al as specified and directed
M&L for providing precast cement concrete type B0 1:2:4 using 12.5 mm graded aggregate) set in cement mortar 1:4 louvers and jalies, 40mm thick (measured solid) including all mouldings but excluding frame complete all as specified and directed.
M&L for reinforced cement concrete type B1 using 20mm graded aggregate as in slabs supported on walls, beams, and columns in floors, roofs landings, balconies ,canopies , deck slabs and in shelves and the like complete all as specified and directed
M&L for 18-20mm thick granite(of any type) work table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixureof pigment to match with shade of granite complete all as specified and directed
M&L for preparation of old existing surface by scrapping smoke soot, moulds and efflorescent salt and trading oil and greasy spots washing , rubbing down and stopping of distempered and painted by scrapping machine tool/electric hand grinder and cleaning the surface etc. and applying one coat of super coat acrylic exterior paint of approved make in required shade over a coat of primer over & including a layer of 1 to 2 mm thick putty existing on cleaned/primered surface by Mechanical spraying/painting machines) as per manufacturer's specification etc including all tools, plants scaffolding, safety belts complete all as specified and directed.
M&L for preparation of old existing surface by scrapping smoke soot, moulds and efflorescent salt and trading oil and greasy spots washing , rubbing down and stopping of distempered and painted by scrapping machine tool/electric hand grinder and cleaning the surface etc. and applying two coat of super coat acrylic exterior paint of approved make in required shade over a coat of primer over & including a layer of 1 to 2 mm thick putty existing on cleaned/primered surface by Mechanical spraying/painting machines) as per manufacturer's specification etc including all tools, plants scaffolding, safety belts complete all as specified and directed.
M&L for removing, scrapping & cleaning the existing plastered unplastered painted/ old painted surface by scrapping machine tool/electric hand grinder or removal of paint from wall surface completely from exposed brick/ plasterd surfaces and providing and applying and painting one coat of oil emulsion distemper over a coat of primer of coat and 3 mm thick wall care putty in required shade and even finish on over existing cleaned/primered surface by mechanical paint sprayers on exposed brick wall/ plain wall surface) as per manufacturer,s specification etc. including all tools, plants scaffolding, safety belts complete all as specified and directed
M&L for removing, scrapping & cleaning the existing plastered unplastered painted/ old painted surface by scrapping machine tool/electric hand grinder or removal of paint from wall surface completely from exposed brick/ plasterd surfaces and providing and applying and painting two coat of oil emulsion distemper over a coat of primer over & including a layer of 3 to 5mm thick putty in required shade and even finish on over existing cleaned/primered surface by Mechanical paint sprayers on exposed brick wall/ plain wall surface as per manufacturer's specification etc. including all tools, plants scaffolding, safety belts complete all as specified and directed
M&L for removing, scrapping & cleaning the existing old painted wooden surface and applying one coats of synthetic enamel paint on old painted surface of approved brand and shade etc. by mechanical paint sprayers complete all as specified and directed
M&L for removing, scrapping & cleaning the existing old painted wooden surface & applying two coat of synthetic enamel paint on old painted surface over one coat of pink primer of approved brand and shade etc. by mechanical paint sprayers complete all as specified and directed
M&L for removing, scrapping & cleaning the existing old painted surface by scrapping machine tool/electric hand grinder or removal of paint from wall surface completely from exposed brick/ plasterd surfaces including cornices etc. , scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots and removal of vegetation's etc making surface even and smooth and applying two coat of white wash on old surface of wall complete all as specified and directed
M&L for removing, scrapping & cleaning the existing old painted surface by scrapping machine tool/electric hand grinder or removal of paint from wall surface completely from exposed brick/ plasterd surfaces including cornices etc. , scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots and removal of vegetation's etckaking surface even and smooth by applying wall care putty and applying two coat of colour wash on old surface of wall complete all as specified and directed
M&L for preparation of old decorated surface of ceiling and applying one coat of white wash complete all as specified and directed
M&L for preparation of new plastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots and stopping of distemperd surface and applying two coat of oil emulsion distemper of approved shade over a coat of primer complete all as specified and directed
M&L for preparation of new surface of steel and iron based materials by brooming down or steel wire brushing ,scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots of any description, not otherwise described over 10cm in width or girth and applying two coat of synthetic enamel paint, white or tinted over a coat of red oxide primer complete by mechanical paint sprayers complete all as specified and directed
M&L for preparation of new surface of steel and iron materials by brooming down or steel wire brushing ,scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots of any description , not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted by mechanical paint sprayers complete all as specified and directed
M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots and removal of vegetation's by scrapping machine tool/electric hand grinder and making the surface even and smooth by applying one coat of cement base paint white or tinted by mechanical paint sprayers over a layer of 1 to 2 mm wall care putty complete all as specified and directed
M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots and removal of vegetation's by scrapping machine tool/electric hand grinder and applying two coat of cement base paint white or tinted on old surface of wall by mechanical paint sprayers complete all as specified and directed
M&L for 5 mm thick rendering on fair faces of brick or concrete ceiling surface in CM 1:3 finished even and smooth with out using extra cement complete all as specified and directed.
M&L for preparing of newly plastered wall surface and applying two coats of cement base paint over a coat of chalk whitening complete all as specified and directed.
M&L for preparation of new plastered surfaces , and applying two coats of oil emulsion distemper over a coat chalk whiting of approved shade complete all as specified and directed.
M&L for preparing of newly plastered ceiling surface and applying two coats of white wash complete all as specified and directed.
S&F rotational moulded, multilayer (three layer) HDPE water storage tank white colour of 2000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20 mm dia full threaded GI tank nipple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minimum weight 210 gms ) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.
M&L for RCC NP2 drain pipe 200 mm bore with collar laid in trenches and jointed in cement mortar 1:2 with spun yarn and tested complete all as specified and directed.
S&F in repair steel window box type comprising ERW Hollow 'P' section of size 60 x 25mm of 1:25 wall thick frame angle rebated skeleton shutter made of ERW section 50 x 20mm of 1mm wall thickness and operated leaf side huge with two Nos sash bars of "T" section 20 x 30 mm welded to frame of shutter and operable shutter prepared to receive sheet glass complete including cutting holes four prepared to receive sheet glass complete including cutting holes four Nos for each window and making good dismantling portion in PCC (1:2:4) TYPE B-1 including following fittings welded to frame/shutter :- (a) Hold fast 150mm out of 25x6mm flat iron made to shape 04 Nos for each window (02 Nos on each side). (b) Handle of 'Z' Section 20mmx25mm, 100mm long 01 No for each leaf. (c) MS tower bolt 150mm long - 02 NOs for each leaf. (d) 'Z' section 20 x 25mm, 100 mm long stopper 01 No for each leaf. (e) Cleat 55mm long of Hollow square section 15mm x 15mm of 24 gauge wall thickness. Welded to hinge of 55mm size 01 No for each leaf. (f) MS box type hinges of 75mm size - 03 Nos for each leaf. (g) Fabrication & fixing complete. Note. Glass panes & painting shall be measured & paid separately.
Ditto all as per Item No.156 but without sash bar to receive wire gauge.
S&F factory made steel window with side hung shutter including projecting type hinges with steel handle, steel peg stay, complete with glazing bar, dovetailed or welded complete all as specified and directed.
S&F factory made steel window with side hung shutter including projecting type hinges with steel handle, steel peg stay, complete without glazing bar, dovetailed or welded complete all as specified and directed.
S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.
S&F aluminium anodized single leaf door with shutter of frame size 101.60 X44.45 X 1.50 mm. The shutters having vertical stiles of size 83.50 X 44.45 X1.5 mm top and bottom rail of size 114.30x44.45x1.5mm and middle/ lock rails of size 83.50 X 44.45 X 1.5 mm. The glazing shall be done with 5.0mm thick glass as approved by GE and shall be fixed with glazing clip of size 18.20x16.60x1.0mm complete and the each shutter shall have the following provisions complete all as specified and directed:- (a) Handle 100mm dia dis type -02 Nos (b) Lock 6 levers -01 Nos (c) 200mm long tower bolt- 01 No (d) Floor spring heavy duty ISI marked of suitable size- 01 No
S&F aluminium anodized sliding windows with aluminium track section of size 62x30x1.20mm and shutter section of size 40x18x1.20mm sliding with nylon roller glazing with 4mm thick laminated glass/ non transparent glass glazing handle cleats and locking arrangements including aluminium expended grills thickness 5.50mm and stainless steel wire mesh 1.48mm aperture etc complete all as per specified and directed by Engineer-in-Charge.
S&F in repair of 18 mm thick solid PVC prelaminated board of approved make and specification coloured as in shelves etc. complete all as specified and directed.
Dismantling of wall and ceiling boards ( fiber, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness including cover fillets complete all as specified
M & L for E-board tiles ceiling on GI powder coated channel/Tee/Grid of frame work with the following specification including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0/Cement mortar 1:3 complete all as specified and directed with following:- (a) M & L Plugging to wall around the rooms & supplying & fixing GI powder coated angle of make (Armstrong or equivalent) of size 25 x 25 mm x 0.5mm (b) S & F 1.6mm dia GI wire suspenders with adjustable clamps and dash free fasteners with rawl plug and screws plugging in RCC slab placed @ 605mm centre to centre from perimeter of wall. (c) S & F 25x25x0.5mm thick GI tee powder coated as main and cross members at 595 mm centre to centre supported suspenders along with adjustable clamp to maintain level. (d) S & F 4mm thick E-boards of approved texture and finished ceiling tiles of size 595 mm x 595 mm , confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE
Taking down/adjusting/ re-fixing of existing ceiling to suit the size of ceiling board & M&L for 4mm thick for non asbestos fiber cement building boards to fixing of anodised aluminium snap grid frame work for ceiling all as specified.
Vibha Enterprises
M/S Akhilesh Enterprises
M/S VIVEK DUBEY
SUNIL ENTERPRISES
Comnet technologies
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .