Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.9 LAccepted-AOC | L1 | Accepted-AOC Accepted
being L1 | |
| 2 | L2₹37.8 L+₹3.5 L (10.1%)Rejected-AOC | L2 | Rejected-AOC Rejected being L2 | |
| 3 | L3₹38.2 L+₹3.8 L (11.1%)Rejected-AOC | L3 | Rejected-AOC Rejected being L3 | |
| 4 | L4₹38.5 L+₹4.2 L (12.1%)Rejected-AOC | L4 | Rejected-AOC Rejected being L4 | |
| 5 | L5₹38.8 L+₹4.5 L (13.0%)Rejected-AOC | L5 | Rejected-AOC Rejected being L5 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
19 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 867 EWS
GE 867 EWS C/O 99 APO PIN 913867
REPAIRS TO EXTERNAL WATER SUPPLY LINES AND ALLIED WORKS IN ZONE A AND ZONE B AREA AT KALIMPONG UNDER GE 867 EWS
2022_MES_531042_1
CA NO GE/867/TOKEN/ 07 OF 2022-2023
Open Tender
Civil Works - Water Works
Item Rate
270 days
Kalimpong
Refer tender documents
8 documents required · 8 mandatory
₹500
GE 867 EWS
₹60,000
Yes
3 Sept 2022
15 Jun 2022
20 Jul 2022
15 Jun 2022
19 Jul 2022
29 Jun 2022
15 Jun 2022 - 23 Jun 2022
60 days
Amount
Excavation in trenches ,n.exe 1.5m wide and n.exe 1.5m deep for foundation, laying of pipes etc., or for shafts, wells, cesspits, manholes etc., n.exe 10 sqm on plan and n. exe 1.5 m in depth and getting out in soft/ loose soil complete all as directed by Engineer-in-Charge.
Excavation in trenches ,n.exe 1.5m wide and n.exe 1.5m deep for foundation, laying of pipes etc., or for shafts, wells, cesspits, manholes etc., n.exe 10 sqm on plan and n. exe 1.5 m in depth and getting out in hard/ dense soil complete all as directed by Engineer-in-Charge.
Returning, filling in soil, including spreading leveling, watering and well ramming in laying not exceeding 25 cm thick complete all as directed by Engineer-in-Charge.
Removing excavated soil to a distance n.exe 50m and depositing where directed at a level n.exe 1.5m above the starting point complete all as directed by Engineer-in-Charge.
M&L for taking up or down existing 20 mm dia bore water tubing and connections and cleaning & re-laying with and including new ISI marked pipe fittings, in new or old position in trenches, floors, etc., or fixed to wall complete all as specified and as directed by Engineer-in-Charge. NOTE: Excavation and earth work shall be measured and paid separately.
All as per item No. 5 above but 25 mm dia bore.
All as per item No. 5 above but 40 mm dia bore.
All as per item No. 5 above but 50 mm dia bore.
All as per item No. 5 above but 80 mm dia bore.
S&F 20 mm dia bore medium grade galvanised iron tubing with all fittings and fixtures fixed to wall, roof, floor complete including taking up or down existing water tubing and connections complete all as specified and as directed by Engineer-in-Charge.
All as per item No. 10 above but 25 mm dia bore.
All as per item No. 10 above but 40 mm dia bore.
All as per item No. 10 above but 50 mm dia bore.
S&F 20 mm dia bore medium grade galvanised iron tubing with all fittings and fixtures complete laid in trenches or on ground including taking up or down existing water tubing and connections complete all as specified and as directed by Engineer-in-Charge. NOTE: Excavation and earth work shall be measured and paid separately.
All as per item No. 14 above but 25 mm dia bore.
All as per item No. 14 above but 40 mm dia bore.
All as per item No. 14 above but 50 mm dia bore.
All as per item No. 14 above but 80 mm dia bore. Make for Item No. 10 to 18: TATA/ ZENITH / JINDAL
Fixing only 25 mm dia bore medium grade galvanised iron tubing with all fittings and fixtures fixed to wall, roof, floor or laid in floor or in trenches complete including taking up or down existing water tubing and connections complete all as specified and as directed by Engineer-in-Charge.
All as per item No. 19 above but 40 mm dia bore.
All as per item No. 19 above but 80 mm dia bore. Note for Item No. 19 to 21: GI pipe shall be issued under scbedule 'B' "Free for fixing only. All pipe fittings shall be contractors supply and rate quoted shall be deemed to be included for the same. .
Supply and fixing Rotational moulded polyethylene water storage tank cylindrical vertical double layered, 500 ltrs capacity with closed top hoisted and fixed in position all as specified in SSR Part I including taking down existing water tank complete all as specified and directed by Engineer-in-Charge.
All as per item No. 22 above but 750 ltrs capacity.
All as per item No. 22 above but 1000 ltrs capacity.
All as per item No. 22 above but 2000 ltrs capacity. Make for Item No. 22 to 25: SINTEX/ INFRA/ GP/ ROTEX/ ORIPLAST/ ASHISH/ POLYCON or equivalent ISI marked make as approved by GE.
S&F gun-metal, globe or gate valves of with iron wheel head, screwed both ends for iron pipe of 20 mm dia bore and fixed including taking down existing unserviceable valve complete all as specified and directed by the Engineer-in-Charge.
All as per item No. 26 above but 25 mm dia bore.
All as per item No. 26 above but 40 mm dia bore.
All as per item No. 26 above but 50 mm dia bore. Make for Item No. 26 to 29:LEADER/NETA/ANCHOR/NMC/ DURGA/ZOLOTO or equivalent ISI marked make as approved by GE.
S&F PVC cover (lid) for polythene water storage tanks of 500 to 1000 capacity of different make like sintex/polycon/Titaki etc, with suitable nuts, bolts and locking arrangement incl removing the broken unserviceable cover complete all as specified and directed by Engineer-in-Charge.
M & L Fe 290 Gde -E-165 mild steel angles or tees etc., as in staging of water tanks with web and flanges cut to shape, drilled and counter-sunk for screw, including bending and weilding angles as necessary , gusset plates, riveting etc, brackets n exc 10 kg each including painting exposed surfaced with two coats of black bituminous paint over one coat of red oxide zinc chrome primer, including taking down existing steel work complete all as specified and as directed by Engineer-in-Charge.
M&L for Plain cement concrete 1:3:6 mix type C2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete etc., all as specified and directed by Engineer-in-Charge.
M & L Plain cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in coping including necessary formwork, weathering, slightly rounded or chamfered andgles, finishing of exposed surfaces of concrete to even and smooth without using extra cement all as specified and directed by Engr-in-charge.
M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:4 finished fair and even complete all as specified and directed by Engr-in-charge.
M&L for factory made precast cement block masonry with solid blocks made of Plain cement concrete 1:3:6 mix type C1 (using 20 mm graded stone aggregate) exceeding 10cm width and setting in cement mortar 1:6 including demolition of existing block masonry complete all as specified and directed by Engineer-in-charge. Make : Shankar Saw Mills/Sangam Prefeb Products or equivalnt as approved by GE.
M&L for construction of Valve chamber of internal dimension/size 1100 x 900 x 1000 mm, with 200mm thick pre-cast PCC solid block masonry (made of PCC 1:3:6 type C-1 : using 20mm graded crushed stone aggregate) wall in cement mortar 1:6, with 1.6 mm thick MS sheet cover, fixed with 25x25x6 mm stiffner welded around, welded over angle iron frame of size 65 x 65 x 6 mm with locking arrangements including applying two coats of first grade synthetic enamel paint (of approved tint) over a coat of red oxide primer on steel surfaces, necessary earth work in soft/loose soil with and including 100 mm thick PCC (1:3:6) Type C-2 (using 40mm graded stone aggregete) as in foundation, 50 mm thick PCC (1:2:4),Type B-1 (using 20mm graded stone agregate) as in coping on top including rendering 10mm thick in cement mortar 1:6, finished even and fair and applying three coats of white wash on exposed surfaces, complete including demolition of existing unserviceable valve chamer complete all as specified and directed by the Engineer-in-Charge. (The chamber shall be 150 mm above the ground level.)
M&L for construction of Valve chamber of internal dimension/size 900 x 900 x 1000 mm, with 200mm thick pre-cast PCC solid block masonry (made of PCC 1:3:6 type C-1 : using 20mm graded crushed stone aggregate) wall in cement mortar 1:6, with 1.6 mm thick MS sheet cover, fixed with 25x25x6 mm stiffner welded around, welded over angle iron frame of size 65 x 65 x 6 mm with locking arrangements including applying two coats of first grade synthetic enamel paint (of approved tint) over a coat of red oxide primer on steel surfaces, necessary earth work in soft/loose soil with and including 100 mm thick PCC (1:3:6) Type C-2 (using 40mm graded stone aggregete) as in foundation, 50 mm thick PCC (1:2:4),Type B-1 (using 20mm graded stone agregate) as in coping on top including rendering 10mm thick in cement mortar 1:6, finished even and fair and applying three coats of white wash on exposed surfaces, complete including demolition of existing unserviceable valve chamer complete all as specified and directed by the Engineer-in-Charge. (The chamber shall be 150 mm above the ground level.)
M & L Fe 290 Gde -E-165 mild steel angles or tees etc., as in modification of existing staging of water tanks and door or door frames of valve chambers etc., with web and flanges cut to shape, drilled and counter-sunk for screw, including bending and weilding angles as necessary , gusset plates, riveting etc, n exc 10 kg each brackets including painting exposed surfaces with two coats of black bituminous paint over one coat of red oxide zinc chrome primer including taking down existing steel work complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of treated surfaces of steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint all as specified and directed. Make: ASIAN/ SHALIMAR/ BERGER/ JENSON&NICHOLSON/IEL/NEROLAC/IEL
S&F Symet ball valve 25 mm with high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed min weight for 25 mm 455 gms, including taking down existing unserviceable ball valve complete all as specified and directed by Engineer-in-Charge.
S&F Symet ball valve 20 mm with high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed min weight for 20 mm 210 gms, including taking down existing unserviceable ball valve complete all as specified and directed by Engineer-in-Charge. Make for Item No. 40&41:- PRAYAG/POLYTUFF or equivalent as approved by GE.
Supply only Calcium based granular disinfectant for water treatment as per direction of Engineer-in-Charge. Make: Puri chlor brand/Decliback/Aquafit or any equivalent make as approved by GE.
M&L for Cleaning of semi under ground water sumps of 1,00,000 Glns capacity in three compartments by removing residual/balance water, taking out solid residual loose dirt, scales, mud, fungus, vegetation growth, scrubbing the complete inner surface of wall and floor with wire brushes and cleaning with water and again cleaning and washing completely using bleaching powder and fresh water, drying the entire surface and applying two coats of lime wash internally and writing the date of cleaning on external surfaces with thick synthetic enamel paint in bold Capital letters (not exceeding 15 cm high) complete all as directed by the Engineer-in-Charge.
All as per item No. 43 above but 1,00,000 Glns capacity in two compartments
All as per item No. 43 above but 50,000 Glns capacity
All as per item No. 43 above but 30,000 Glns capacity
All as per item No. 43 above but 20,000 Glns capacity
M&L cleaning and removing all scale & dirt etc., from PVC water tanks of capacity exceeding 1000 ltrs and not exceeding 2000 ltrs and mouths of circulating pipes etc., by using bleaching powder and writing/marking MES Number and date of cleaning on external surfaces with thick synthetic enamel paint in bold Capital letters (not exceeding 15 cm high) complete all as specified and directed by the Engineer-in-Charge.
All as per item No. 48 above but PVC water tank of capacity exceeding 500 ltrs and not exceeding 1000 ltrs.
All as per item No. 48 above but PVC water tank of capacity exceeding 250 ltrs and not exceeding 500 ltrs.
M & L for taking down existing 80mm sluice valve including taking out connecting pieces, bolts, nuts, packing sheet etc., and repairing the sluice vale parts, such as rings, spindle, rubber gasket, gland clamps with bolts of suitable dia and couples and reassebling and refixing complete all as specified and as directed by Engineer-in-Charge.
M & L for taking down existing 100mm sluice valve including taking out connecting pieces, bolts, nuts, packing sheet etc., and repairing the sluice vale parts, such as rings, spindle, rubber gasket, gland clamps with bolts of suitable dia and couples and reassebling and refixing complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of 80 to 100 mm sluice valves and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge. Make: ASIAN/ SHALIMAR/ BERGER/ JENSON&NICHOLSON/IEL/NEROLAC/IEL
S&F 80 mm bore cast Iron sluice valve, PN 1.6, ISI marked, both ends flanged, with iron wheel, stainless spindle complete with jointing materials, nuts, bolts, washers and rubber gasket etc., including Disconnecting and taking out the old unserviceable sluice valve complete all as specified and as directed by Engineer-in-Charge. Make:- ZOLOTO Art No. 1079B of 80mm or equivalent model of VENUS/UPADHYAY/SCUD/ KARTAR/ DURGA/ KIRLOSKAR or equivalent ISI marked make as approved by GE.
S&F 100 mm bore cast Iron sluice valve, PN 1.6, ISI marked, both ends flanged, with iron wheel, stailess spindle complete with jointing materials, nuts, bolts, washers and rubber gasket etc., including Disconnecting and taking out the old unserviceable sluice valve complete all as specified and as directed by Engineer-in-Charge. Make:- ZOLOTO Art No. 1079B of 100mm or equivalent model of VENUS/UPADHYAY/SCUD/ KARTAR/ DURGA/ KIRLOSKAR or equivalent ISI marked make as approved by GE.
Taking out 3 HP capacity induction motor from installed position removing the burnt out winding and rewinding with sam gauge of super enameled copper wire, varnishing, testing and commissioning, refixing complete all as specified and directed by Engr-in-Charge.
Taking out 2 HP capacity induction motor from installed position removing the burnt out winding and rewinding with sam gauge of super enameled copper wire, varnishing, testing and commissioning, refixing complete all as specified and directed by Engr-in-Charge.
Servicing of 3 HP capacity induction motor from installed position removing from connected pipe lines and serviceing, cleaning of all parts, replacement of minor parts etc and re-fixing the same position, testing and commissioning, complete all as specified and directed by Engr-in-Charge.
Servicing of 2 HP capacity induction motor from installed position removing from connected pipe lines and serviceing, cleaning of all parts, replacement of minor parts etc and re-fixing the same position, testing and commissioning, complete all as specified and directed by Engr-in-Charge.
M& L for cutting of existing steel tubing for alterations or additions (each cut measured) and inserting new Tee, bend, elbow etc 25 to 40 mm dia GI pipe complete all as specified and directed by Engr-in-Charge,
SM& L for cutting of existing steel tubing for alterations or additions (each cut measured) and inserting new Tee, bend, elbow etc 50 to 80 mm dia GI pipe complete all as specified and directed by Engr-in-Charge,
Taking down and refixing of old serviceable PVC water storage tanks including GI fittings wherever required in new or old position of 1000 ltrs capacity complete all as specified and as directed by Engr-in-Charge.
Taking down and refixing of old serviceable PVC water storage tanks including GI fittings wherever required in new or old position of 750/500 ltrs capacity complete all as specified and as directed by Engr-in-Charge.
S & F in replacement of single phase 230 volt direct ON line starter as per existing capacity with all necessary electric connection etc complete all as specified and directed by Engr-in-Charge. Make:- Legrand/Seimens/L&T or equivalent as approved by GE.
Sub Total of Schedule 'A'
Schedule of Credit (Minus) Rs. 98,140.00 B/F from Ser page No. 27 NOTE: Bidder shall insert credit amount as rate Rs. 98,140.00 in Green field under Col-M. If bidder does not insert the amount the same will be deducted from total amount of Schedule 'A' and accordingly total amount of tender will be considered in deciding the lowest tender.
Sub Total of Schedule of Credit
ANTHONY PRADHAN
G K SUTHAR
DEEP CHANDRA JOSHI
SUNIL PRADHAN
SANJAY SAW MILL
MANOJ JINDAL
Sri Gupta Construction
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .