Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.1 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹41.9 L+₹4.1 L (10.9%)Rejected-Finance RANGIYA DIST KAMRUP ASSAM 781365 | BAKSA | ASSAM | 781365 | L2 | Rejected-Finance Unsuccessful bidder |
Tender Value
₹33.5 L
EMD Value
₹67,000
Closing Date
9 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Tezpur
HQ CWE TEZPUR PO DEKARGAON DIST SONITPUR PIN 784501 (ASSAM)
SPL REPAIRS TO BLDG NO ET-264, ET-265, ET- 266, ET-270 AND OTHER SANCTION WORKS AT RANGIA AND CHANGSARI MILITARY STATION UNDER GE RANGIA
2022_MES_529196_2
CWE/TEZ(R)/T-12 of 22-23
Open Tender
Civil Works
Item Rate
180 days
GE Rangia
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Rangia
₹67,000
Yes
7 Sept 2022
27 Jul 2022
10 Aug 2022
27 Jul 2022
9 Aug 2022
27 Jul 2022
Amount
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as per specified and as directed by Engineer-in-charge.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as per specified and as directed by Engineer-in-charge.
Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25cm complete all as per specified and as directed by Engineer-in-charge.
Removing excavated material not exc. 50 m & depositing where directed at a level not exc. 1.5 m above starting point complete all as per specified and as directed by Engineer-in-charge.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius in cement mortar 1:6, complete all as per specified and as directed by Engineer-in-charge.
M&L for brick work with sub-class `B' old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-charge.
'M&L for sand filling under floors or in foundations spreading and levelling in layers not exc. 25 cm thick including watering and consolidation, complete all as per specified and as directed by Engineer-in-charge.
M&L RCC type B1 (1:2:4, 20 mm graded aggregate as in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, complete all as specified and as directed by Engineer-in-charge.
M&L for form work for edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed by Engineer-in-charge.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) including edges fair finished surface of concrete flat complete all as per specified and as directed by Engineer-in-charge.
M&L for mild steel TMT bars 10 mm dia. and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as per specified and as directed by Engineer-in-charge.
M&L for mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality confirming to Fe-410-S 0r Fe-410-O, complete all as per specified and as directed by Engineer-in-charge.
Supply only integral water proofing compound confirming to IS complete all as per specified and as directed by Engineer-in-charge.
M&L three coats of white wash on new plastered surfaces including preparation of surfaces, complete all as per specified and as directed by Engineer-in-charge.
M&L for PCC (1:4:8) type D2 ( using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as per specified and as directed by Engineer-in-charge.
M&L for hardcore of guage not exc. 63mm deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface of broken stone or boulders, complete all as per specified and as directed by Engineer-in-charge.
M&L for 75 mm thick PCC (1:4:8) type D2 (using 40 mm graded crushed stone aggregate) as in sub base of flooring/ hard standing complete all as specified and as directed by Engineer-in-charge.
M&L 75 mm thick Cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate) in footpath / hardstanding / pavings / plinth protections, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6, complete all as per specified and as directed by Engineer-in-charge.
S&F 4 mm thick sheet glass of ordinary quality in squares not exc. 0.5 sqm in each pane glazing with oil putty, complete all as per specified and as directed by Engineer-in-charge.
S&F MS steel work in tubular trusses including special shaped washers etc., complete using ERW or induction butt welded tubes confirming to IS 1161- 1979 graded St 240 along with one shop coat of zinc chromate primer paint , complete all as per specified and as directed by Engineer-in-charge.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated or semi-corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J hooks, complete all as specified and as directed by Engineer-in-charge.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube in opening complete all as per specified and as directed by Engineer-in-charge.
Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. .frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as per specified and as directed by Engineer-in-charge.
S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as per specified and as directed by Engineer-in-charge.
S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C-21, complete all as per specified and as directed by Engineer-in-charge.
S&F 150 mm long extruded Aluminium alloy handles, fabricated type, anodised, complete all as per specified and as directed by Engineer-in-charge.
S&F15 mm bore Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge.
S&F in repair fancy type 15mm dia bore pillar tap cast copper alloy with capston heads chroumium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe complete all as per specified and as directed by Engineer-in-charge.
S&F in repair fancy type, CP, stop valves 15 mm, cast copper alloy, screwed dowd, high pressure with crutch or butterfly handle, swrewed both ends for iron or for unions and fixed complete all as specified and as directed by Engineer-in-charge.
Supply and fix 100mm dia grating doom of PTMT with minimum weight 25 grams complete all as specified and as directed by Engineer-in-charge.
S&F 15mm dia PVC connection pipe with PTMT nuts of length 450 mm complete all as specified and as directed by Engineer-in-charge.
S&F Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand etc., complete all as per specified and as directed by Engineer-in-charge.
S&F in repair vitreous china wash down water closet pan (pedestal pattern) white, including seat cover, closed pattern with flat bottom and cover with chromium plated hinging device complete all as per specified and as directed by Engineer-in-charge.
S & F cromimum plated helth faucet shower with CP flexible pipe up 15 mm bore (ABS Body) with 1 mtr long Easy Flex tube in chrome finish, complete all as specified and as directed by Engr-in-Charge.
S&F CP toilet paper roll holder with flap including all necessary fittings, complete all as specified and as directed by Engr-in-Charge.
M&L for Granite (of any type) work (table rubbed and polished) 20mm thick in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed by Engineer-in-charge.
S & F Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges complete all as per specified and as directed by Engineer-in-charge.
S&F Corner glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chomium plated bracket guard & railing 45 cm long, complete all as specified and as directed by Engr-in-Charge.
S&F 32 mm dia waste coupling of PTMT (half or full threaded) complete all as specified and as directed by Engineer-in-charge.
S&F 32 mm dia low density polyethylene pipe (LDPE) of pressure rating @ 6Kgf per sqcm fixed to wall complete all as specified and as directed by Engineer-in-charge.
S&F 110 mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors, complete all as per specified and as directed by Engineer-in-charge.
S&F GI tube 15 mm bore medium grade with fittings and fixed complete to wall, ceiling or laid in floor complete all as specified and as directed by Engineer-in-charge.
S&F GI tube 20 mm bore medium grade with fittings and fixed complete to wall, ceiling or laid in floor complete all as specified and as directed by Engineer-in-charge.
S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position, complete all as per specified and as directed by Engineer-in-charge.
M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for pipe of internal dia. 150mm, complete all as specified and as directed by Engineer-in-Charge.
Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 50m, complete all as specified and as directed by Engineer-in-charge.
M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete block surfaces finished even and smooth without using extra cement, complete all as per specified and as directed by Engineer-in-charge.
M&L for glazed coloured ceramic tiles of size 350mmx250mm/ (450mm x 350mm ) X 7 to 8mm thickness in vertical surface set and jointed in neat cement slurry and pointed the tiles over 15 mm thick screed bed or bedding layers in CM (1:6), complete all as per specified and as directed by Engineer-in-charge.
S&F Anodised aluminium window and ventilator with frame and shutters, fixed type without sash bar, aluminium section including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws , including decco grils and lovours etc., complete all as specified and as directed by Engr-in-Charge. (glazing shall be measured and paid seperately under respective item).
M&L for preparation of new or previously untreated steel or iron surface of any description and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer over 10cm width or girth complete all as specified and as directed by Engineer-in-charge.
S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600x600mm comprising of wall/cleat angle of size 25x25x0.30 mm and cross tee of size 22x35x0.60mm with 4mm dia GI wire as suspender and including 4mm thick E-Board classic (decorative type) including fixing arrangement from steel truss of any type and applying three coats of white wash on exposed surface, complete all as per specified and as directed by Engineer-in-charge. (Note - Rate included for lowering/shortening of electric fittings such as fan, light fittings etc.)
M&L chequered cement concrete rubber moulded PU finish tiles 30cmx30 cmx25 mm thick in floor etc, set, jointed and pointed in neat cement slurry and pointed (grey cement & pigment) over 20mm thick screed bed or bedding layer of cement mortar 1:6, complete all as specified and as directed by Engr-in-Charge.
S&F glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chomium plated bracket guard & railing 60 cm long, complete all as per specified and as directed by Engineer-in-charge.
S&F CP towel-ring sqaure, complete all as per specified and as directed by Engineer-in-charge.
S&F 50 mm dia low density polyethylene pipe (LDPE) of pressure rating @ 6Kgf per sqcm fixed to wall complete all as specified and as directed by Engineer-in-charge.
S&F 50 mm PVC (SWR) floor trap with grating including jointing with solvent cement complete all as per specified and as directed by Engineer-in-charge.
S&F110 mm dia bore PVC (SWR) bends, complete all as specified and as directed by Engineer-in-charge.
S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed by Engineer-in-charge.
S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type B-21, complete all as per specified and as directed by Engineer-in-charge.
Dismantling Unframed timber scantlings 40 Sqcm and over in section and in any position, complete all as specified and as directed by Engineer-in-charge.
Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing, complete all as specified and as directed by Engineer-in-charge.
Demolition of brick work built in any cement mortar complete all as specified and as directed by Engineer-in-charge.
M&L for rendering 15 mm thick on othere side of lathing in cement mortar 1:4, surface finished even and smooth without using extra cementt, complete all as per specified and as directed by Engineer-in-charge.
M&L for G I Wire netting 0.9 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc., in walls, ceilings, stanchions, beams, etc., including all laps, cutting and waste, complete all as specified and as directed by Engineer-in-charge.
M&L for rendering 15 mm thick on other than fair faces of brick work or other side of lathing in cement mortar 1:6, surface finished even and smooth without using extra cementt, complete all as per specified and as directed by Engineer-in-charge.
M&L for preparing new plastered surfaces and applying two coats of distemper oil emulsion on wall surfaces including chalk whitening preparatory to distempering, complete all as per specified and as directed by Engineer-in-charge.
M&L for preparing new plastered surfaces and applying two coats of cement base paint on surfaces of walls over a coat of whitewash, complete all as per specified and as directed by Engineer-in-charge.
Dismantling Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings, complete all as specified and as directed by Engineer-in-charge.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J hooks, complete all as specified and as directed by Engineer-in-charge.
Taking down shutters of any description not exc. 1 sqm each, complete all as specified and as directed by Engineer-in-charge.
Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each, complete all as per specified and as directed by Engineer-in-charge.
S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., without sash bars , edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with (stiles and rails 80mm,muntins 60mm & glazing bars 45mm wide) as specified in SSR Pt I Section 8, clause 8.24 (b), complete all as per specified and as directed by Engineer-in-charge.
M&L S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both faces is covered with decorative face veneer with lipping/frame to match, complete all as specified and as directed by Engr-in-Charge.
S & F 75 mm long medium weight cold rolled mild steel Butt hinges with galvanized mild steel hinge, complete all as per specified and as directed by Engineer-in-charge.
S&F 75 mm Mild steel pressed handles, oval type, stove enamelled black, complete all as per specified and as directed by Engineer-in-charge.
S&F 100 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, complete all as per specified and as directed by Engineer-in-charge.
S & F 100 mm long medium weight cold rolled mild steel Butt hinges with galvanized mild steel hinge, complete all as per specified and as directed by Engineer-in-charge.
S&F 100 mm Double action spring hinges, mild steel with steel wire spring, stove enamelled, black, complete all as per specified and as directed by Engineer-in-charge.
S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as per specified and as directed by Engineer-in-charge.
S&F 100 mm long extruded Aluminium alloy handles, fabricated type, anodised, complete all as per specified and as directed by Engineer-in-charge.
S&F aluminium alloy 300 mm anodised sliding door bolts with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy, complete all as specified and as directed by Engineer-in-charge.
Dismantling wall and ceiling boards (fibre, pulp, insulation,etc) or insulation board/Slabs/blankets of any thickness including cover fillets, complete all as specified and as directed by Engineer-in-charge.
S&F in repair exposed GI powder coated snap grid frame work for false ceiling of grid size 600x600mm comprising of wall/cleat angle of size 25x25x0.30 mm and cross tee of size 22x35x0.60mm with 4mm dia GI wire as suspender and including 4mm thick E-Board classic (decorative type) including fixing arrangement from steel truss of any type and applying three coats of white wash on exposed surface, complete all as per specified and as directed by Engineer-in-charge. (Note - Rate included for lowering/shortening of electric fittings such as fan, light fittings etc.)
M&L 4 mm thick asbestos cement Plain building boards, fixed to timber frame work with screws in walls, complete all as per specified and as directed by Engineer-in-charge.
S&F 3 mm thick sheet glass, ordinary quality in squares not exceeding 0.5 Sqm in each pane fixed with cut & mitred beads, complete all as specified and as directed by Engineer-in-charge.
S&F galvanised mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with galvanised wire staples, complete all as specified and as directed by Engineer-in-charge.
S&F in repair galvanised mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with galvanised wire staples, complete all as specified and as directed by Engineer-in-charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as per specified and as directed by Engineer-in-charge.
S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:4, complete all as per specified and as directed by Engineer-in-charge.
S & F for Coloured Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and pointed in white or Coloured cement to match over 10 mm thick screed bed or bedding layers in CM 1:4, complete all as per specified and as directed by Engineer-in-charge.
S&F for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:4, complete all as per specified and as directed by Engineer-in-charge.
M&L for preparation of old painted surfaces of walls and applying one coat of OBD, complete all as per specified and as directed by Engineer-in-charge.
M&L for preparation of new or previously untreated wood or wood based surfaces of any description, exceeding 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint, complete all as specified and as directed by Engineer-in-charge.
M&L preparing old painted surfaces of walls including washing, rubbing down and stopping and applying one coat of cement based paint, complete all as per specified and as directed by Engineer-in-charge.
M&L for preparation of new or previously untreated wood or wood based surfaces of any description, exceeding 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed by Engineer-in-charge.
M&L for preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with two coats of cresote oil, complete all as specified and as directed by Engineer-in-charge.
S & F in repair Soap dish, chromium plated of size 160 x 160 x 90 mm complete all as per specified and as directed by Engineer-in-charge.
S&F in repair Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand etc., complete all as per specified and as directed by Engineer-in-charge.
S&F Vitreous China squatting pan "Orissa" patern size 580x440mm white with integral foot rest including connection to trap and to flushing pipe, anti-syphonage pipe, etc including 'P' or 'S' trap complete all as per specified and as directed by Engineer-in-charge.
S & F Vitreous china urinal, bowl type flat back of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws complete all as per specified and as directed by Engineer-in-charge.
Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed by Engineer-in-charge.
Taking down chowkat or frame exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutter from the frame), complete all as specified and as directed by Engineer-in-charge.
Taking down chowkat or frame not exceeding 1.5 Sqm each (without taking off shutter from the frame), complete all as specified and as directed by Engineer-in-charge.
Demolition of unreinforced cement concrete in ground floors and pavings nexc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engineer-in-charge.
Demolition of reinforced cement concrete in ground floors and pavings nexc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engineer-in-charge.
Dismantling of Boarding, any description and any position, fixed with Nails, complete all as specified and as directed by Engineer-in-charge.
Taking up or down 15 mm bore steel tubing and connections, complete all as per specified and as directed by Engineer-in-charge.
Taking up or down 20 mm bore steel tubing and connections, complete all as per specified and as directed by Engineer-in-charge.
S&F pressed steel frames of size 125 x 60 mm for double doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. including filling of PCC 1:3:6 type in 20mm graded stone aggregate, complete all as per specified and as directed by Engineer-in-charge.
S&F pressed steel frames of size 105 x 60 mm for double doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. including filling of PCC 1:3:6 type in 20mm graded stone aggregate, complete all as per specified and as directed by Engineer-in-charge.
M&L PCC (1:3:6) type C-1 as in bed block of hold fast using 20 mm stone agg steps etc., complete all as specified and as directed by Engineer-in-charge.
S&F 30 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, complete all as per specified and as directed by Engineer-in-charge.
S&F Factory made solid wire gauzed pvc door shutter 30mm thick (style) consisting of frame made out of M.S.tubes for top & bottom rails.M.S.frame shall be covered with heat moulded prelam PVC "C" channel having a prelam PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panells will be wire gaused in lieu of single side prelam PVC sheet panel. The wire gause shall be wrapped on an additional square 8 mm MS solid tube and this tube shall be welded to MS tubes. The wire gause shall be stretched to tighten firmly. And jointed to gether with solvent cement, suppling & fixing in the frame at site complete all as per specified and as directed by Engineer-in-charge.
M&L for rendering 15mm thick on fair faces of brick work or or concrete surfaces in cement mortar 1:4 , surface finished even and smooth without using extra cement using with WPC @ 2% by the weight of cement as per manufacturer's direction complete all as per specified and as directed by Engineer-in-charge. Note - WPC shall be measured and paid saparately.
M & L 10 mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces and finished the surface even & smooth without using extra cementt, complete all as per specified and as directed by Engineer-in-charge.
M&L applying two coats of distemper over a coat of 1 mm thick a layer of wall care putty on walls including preparation of surface complete all as per specified and as directed by Engineer-in-charge.
M&L for complete removal of existing treatment of old distempared surfaces and applying two coat of oil bound distemper on walls over 1 mm thick wall putty including one coat of chalk whiting primer, complete all as per specified and as directed by Engineer-in-charge.
M&L for preparing new plastered surfaces and applying two coats of cement based paint on walls over a coat of alkali resistant primer, complete all as per specified and as directed by Engineer-in-charge.
M&L for complete removal of existing treatment of old surfaces and applying two coats of cement based paint on walls, complete all as per specified and as directed by Engineer-in-charge.
M&L for 25 mm thick PCC (1:2:4) type B1 (using 40 mm graded crushed stone aggregate) as in floor finished rough to receive floor finish complete all as per specified and as directed by Engineer-in-charge.
M&L for 15 mm thick screed bed or bedding layer of mortar (1:6) for laying floor surface finishes, complete all as specified and as directed by Engineer-in-charge.
M&L for 10 mm thick screed bed or bedding layer of mortar (1:4) for laying floor surface finishes, complete all as specified and as directed by Engineer-in-charge.
S&F non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile 600mmx600 mm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match, complete all as per specified and as directed by Engineer-in-charge.
All as per serial item No. 125 above but on vertical surface.
S&F Non-skid colour ceramic tiles (300x300) x 6 to 7mm thick in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and as directed by Engineer-in-charge.
S&F Coloured glazed ceramic tiles 300 X 600 mm of 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in skirting, dado, etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match complete all as specified and as directed by Engineer-in-charge.
S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as per specified and as directed by Engineer-in-charge.
S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as per specified and as directed by Engineer-in-charge.
M&L for steel windows with side hung shuttres including box type hinges with steel handle and steel peg stay ,complete without glazing bars, dovetailed or welded, complete all as per specified and as directed by Engineer-in-charge.
M&L for steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay ,complete with glazing bars,dovetailed or welded, complete all as per specified and as directed by Engineer-in-charge.
M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as per specified and as directed by Engineer-in-charge.
S&F 125 mm long extruded Aluminium alloy handles, fabricated type, anodised, complete all as per specified and as directed by Engineer-in-charge.
S&F 250 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as per specified and as directed by Engineer-in-charge.
S & F 125 mm long medium weight cold rolled mild steel Butt hinges with galvanized mild steel hinge, complete all as per specified and as directed by Engineer-in-charge.
S&F floor door stopper 14cm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as per specified and as directed by Engineer-in-charge.
S&F in repair exposed GI powder coated snap grid frame of false ceiling 600 X 600 mm size of wall angle 25 X25 X 0.30mm size cross Tee 22 X 35 X 0.60mm with 4mm dia GI suspender fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm including supply and fixing of 4 mm thick E- board in false ceiling including fixing arrangement from roof and applying three coats of white wash on exposed surfaces, complete all as per specified and as directed by Engineer-in-charge. (Note- Rate included for lowering / shortening of electric fittings such as fan, light fittings etc.
S & F in repair 300mm, ordinary rat tail rod pattern door springs including roller and roller plate, complete all as per specified and as directed by Engineer-in-charge.
M&L 2nd class hard wood in scantling wrought timber unframed and fixed, complete all as specified and as directed by Engineer-in-charge.
M&L for 50 mm thick 2nd class hard wood boarding supplied and fixed with nails in any situation (except flooring and skirting) plained one side with butt joints complete all as per specified and as directed by Engineer-in-charge.
M&L for forming construction joint 30 mm deep x 10 mm wide filled with sealing compound grade "B", complete all as specified and as directed by Engineer-in-charge.
M&L cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in surface channels and drains, complete all as specified and as directed by Engineer-in-charge.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends complete all as specified and as directed by Engineer-in-charge.
M&L for RCC 1:1.5:3 ( 20 mm graded agg) as in Lintel/chajja etc. etc, complete all as per specified and as directed by Engineer-in-charge.
M&L for RCC 1:1.5:3 ( 20 mm graded agg) as in column, post etc, complete all as per specified and as directed by Engineer-in-charge.
M&L for form work for side of pillars, posts, columns & similar works vertical or batter complete all as specified and as directed by Engineer-in-charge.
M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., complete all as per specified and as directed by Engineer-in-charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed by Engineer-in-charge.
M&L for MS rolled section of grade Fe-410-W (Grade-E-250) quality-A (beam, tee, angle channel ot flat section) as in roof trusses (framed), trussed purlins, crane gantries rails, and fastening and heavy bracket framing including destance pieces, wind tie, cleats etc. complete all as specified and as directed by Engineer-in-charge.
All as per above serial no above 151 but erection and fixing only
S&F in repair PVC valve less, syphonic action type flushing cistern,10 Ltr caacity low level, white with inlet ball valve float and handle including brackets and flush pipe, complete all as per specified and as directed by Engineer-in-charge.
S&F in repair 15mm dia PVC connection pipe with PTMT nuts of length 450 mm complete all as specified and as directed by Engineer-in-charge.
S&F in repairs 15mm bore fancy type chromium plated bib taps with crutch or butterfly handle screwed down for iron pipes, complete all as per specified and as directed by Engineer-in-charge.
S&F in repair 15 mm stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as per specified and as directed by Engineer-in-charge.
S&F in repairs vitreous china wall hung wash basin white, size 200x550x400 mm excluding taps, waste, but including barkets with pedestal, complete all as per specified and as directed by Engineer-in-charge.
S&F fancy type 15mm dia bore pillar tap cast copper alloy with capston heads chroumium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe complete all as per specified and as directed by Engineer-in-charge.
Dismantling water tanks of capacity exc. 250 and not exc. 500 ltrs, complete all as per specified and as directed by Engineer-in-charge.
S&F rotational moulded polyethylene water storage tanks double layered ISI Marked (cylindrical, vertical with closed top) of 500 Ltrs capacity hoisted and fixed in position, complete all as per specified and as directed by Engineer-in-charge.
S&F in repairs 20mm ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minium weight 20mm- 210 gms) and fixed in position complete all as per specified and as directed by Engineer-in-charge.
S&F in repair Vitreous China squatting pan "Orissa" patern size 580x440mm white with integral foot rest including connection to trap and to flushing pipe, anti-syphonage pipe, etc including 'P' or 'S' trap complete all as per specified and as directed by Engineer-in-charge.
S&F in repair wall mixer , 3 in -1 system with provision for shower, chromium plated, fancy type, 15 mm bore, complete all as per specified and as directed by Engineer-in-charge.
S & F in repairs brass plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union, complete all as per specified and as directed by Engineer-in-charge.
Dismentling and breakingup drain pipes AC /CI /PVC set in cement mortar 100mm/75mm bore, complete all as specified and as directed by Engineer-in-charge.
S&F 110 mm dia PVC (SWR) pipes single socketed, in any length, fixed to wall or floors, complete all as per specified and as directed by Engineer-in-charge.
S&F in repair sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm, complete all as per specified and as directed by Engineer-in-charge.
M&L for old painted surface of steel or iron surface of any description and applying one coats of synthetic enamel paint over 10cm width or girth complete all as specified and as directed by Engineer-in-charge.
Dismantling of unframed fillets, rails, posts, rafters, purlins etc., under 40 Sqcm in section, complete all as specified and as directed by Engineer-in-charge.
M&L second class hard wood plain fillets, square or rectangular or triangular in section, clean sawn, secured with nails or brads having sectional area exceeding 6 sqcm but not exceeding 13 sqcm complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of new or previously untreated wood or wood based surfaces of any description, not exceeding 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed by Engineer-in-charge.
M&L for in repairs in patches n exc 5 sq. m each, G I Wire netting 0.9 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc., in walls, ceilings, stanchions, beams, etc., including all laps, cutting and waste, complete all as specified and as directed by Engineer-in-charge.
S&F in repair fancy type curtain/hanger rods of mild steel pre painted with fixing decorative bracket stops rollers etc complete all as per specified and as directed by Engineer-in-charge.
M & L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete.
M&L for for precast cement concrete (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge.
Roughening surfaces of old concrete floor by picking, sweeping clean & washing down with water to remove dust etc and brushing neat cement slurry at the rate of 3 kg per sqm, complete all as per specified and as directed by Engineer-in-charge.
S&F Terrazo tiles 20cm x 20cm x 20 mm thick with size of chips upto 6 mm, set jointed and pointed in neat cement slurry with white cement and pigment, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match complete all as specified and as directed by Engineer-in-charge.
M&L 100 mm thick Cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate) in path / hardstanding / sub base / plinth protections etc., finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
S&F anodised aluminium door using 96.6mm X 44.8 mm X 1.5 mm aluminium chowkhats, 84.0 x44.7mmX1.5mm section vertical styles and 101. 60X44.88X1.5mm rails mounted 04 Nos SS butt hinges 100 mm for each shutter with hydraulic door closer, mortice lock six lever vertical type mild steel 100 mm size, 150 mm , 200 mm 2 Nos door handles and fittings complete all as specified and directed by Engr-in-Charge bottom panel and top panel fixed with snap beading rubber of suitable size, complete all as per specified and as directed by Engineer-in-charge.
Supply and fix fancy type, CP, stop valves 15 mm, cast copper alloy, screwed dowd, high pressure with crutch or butterfly handle, swrewed both ends for iron or for unions and fixed complete all as specified and as directed by Engineer-in-charge.
Taking down carefully aluminum/copper point wiring (light fan, socket or power) complete incl fittings and fixtures such as switches, sockets, light fittings, ceiling rose, pendants, lamp holders, shade conical, regulators etc and separating serviceable fittings for reuse in the same work and removing unserviceable fittings and fixtures with wiring cable, battens, wooden boards etc from site and making good disturbed surfaces of walls, floors, ceiling etc all complete all as specified and directed complete all as per specified and as directed by Engineer-in-charge.
Taking down carefully unserviceable main switches and MCB/DB’s including wooden boards and removing from site including making good disturbed surfaces of walls complete all as per specified and as directed by Engineer-in-charge.
Dismantling of house service brackets of any size and type and making good the distrubed wall surfaces complete all as per specified and as directed by Engineer-in-charge.
M&L for point wiring with 1.5 sqmm size (nominal area) PVC insulated unsheathed single core multi stranded FRLSH copper conductor cable drawn into and incl PVC casing capping sleeves and caps of adequate width and length with all accessories and fittings like bends . elbow crosses etc with PVC round block and PVC terminal boxes with 3.00mm thick laminated sheet cover for mounting fittings etc like switches sockets and fan regulator incl 1.5 sqmm size PVC insulated multistranded FRLSH copper conductor cable as earth continuity conductor and connected to earth dolly complete all as specified and as directed for one light point controlled by one switch, complete all as per specified and as directed by Engineer-in-Charge.
All as per serial item No. 184 above but for one ceiling fan point controlled by one switch.
All as per serial item No. 184 above but for one exhaust fan point controlled by one switch.
All as per serial item No. 184 above but for one 3 pin 5 Amps socket outlet on same board with other switch.
All as per serial item No. 184 above but with 4 sqmm (nominal area) cable with 4.00 sq mm size copper earth continuity conductor of green colour for 15 A socket outlet on independent boards.
All as per serial item No. 184 above but for one 3 pin 5 Amps Switch socket combination outlet on independent board.
Supply and fix switch piano flush type, 6/5 Amps 240 volts single pole one way, complete all as specified and as directed by Engineer-in-charge.
Supply and fix socket outlet, 2 in 1, 3 pin 6/5 Amps, flush type, complete all as specified and as directed by Engineer-in-charge.
Supply and fix switch socket combination 2 in 1, 3 pin, 5/6 Amp flush type universal, complete all as specified and as directed by Engineer-in-charge.
Supply and fix switch socket combination multipurpose 3 pin 15 Amp and 3 pin 5 amp flush type 2 in 1 complete all as specified and as directed by Engineer-in-charge.
Supply and fix fan regulator electronic type, rotary step, Socket type 240 Volt, complete all as specified and as directed by Engineer-in-charge.
Supply and fix ceiling rose surface backelite three terminals, PVC/polycarbonate, insulated body, complete all as specified and as directed by Engineer-in-charge.
S&F PVC rectangular block for mounting, DBs, etc. with 3mm thick plastic laminated sheet cover of size 300 x 300 x 50 mm deep complete all as specified and as directed by Engineer-in-charge.
Supply and fix sheet metal enclosure powder painted for MCB SPN 08 way double door DB with din rail and suitable bus bar complete all as specified and as directed by Engineer-in-charge.
Supply and fix sheet metal enclosure powder painted for MCB SPN 04 way double door DB with din rail and suitable bus bar complete all as specified and as directed by Engineer-in-charge.
Supply and fix MCB SPN 40 Amp 10KA braking capacity 230/240 volt AC, complete all as specified and as directed by Engineer-in-charge.
Supply and fix MCB SPN 6 to 32Amp 10KA braking capacity 230/240 volt AC, complete all as specified and as directed by Engineer-in-charge.
Supply and fix MCB SP 6 to 32Amp 10KA braking capacity 230/240 volt AC, complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning, complete all as specified and as directed by Engineer-in-charge.
Supply and fix lamp holder, PVC/Polycarbonate type complete all as specified and as directed by Engineer-in-charge.
S&F LED tube rod (single side connection) ultra bright glass LED tube of Capacity 20W, 230V, with high efficacy for installation in existing fittings, single side connection retrofit LED tube batten G13 lamp holder, complete all as specified and as directed by Engineer-in-charge.
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 20 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and as directed by Engineer-in-charge.
Supply and fix LED tube light fittings with regal batten for LED, wall mounted, extruded head dissipation & integrated with crystal glass LED tube light (single side connection) 20 W LED 4', 230 V complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable from ceiling rose to tube light fitting complete all as specified and as directed by Engineer-in-charge.
S & F LED light fitting 1x9W /1X10W / 1X18W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-charge.
Taking down and Hanging/refixing only Ceiling/exhaust Fan of any sweep and make and connecting up electric connection from Ceiling Rose/Connector to Fan, complete all as specified and as directed by Engineer-in-charge.
M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 5 of SSR PT 1, 1991 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) including taking down old unserciveable cable, complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.
M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 5 of SSR PT 1, 1991 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs), complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.
S&F House service bracket (Hook type) complete with 40 mm dia GI pipe 3.00 m long, medium grade, two Nos. of 90 degree bends, M.S hook and stay or guy complete all as per specified and as directed by Engineer-in-charge.
Supply and fix exhaust fan having matalic blade and frame, AC, single phase 230/240V, 50 Hz of size 225 mm sweep with louvers including cutting of wall to suitable size to fix the exhaust fan with nut bolts etc., complete all as specified and as directed by Engineer-in-charge.
Supply and fix exhaust fan having matalic blade and frame, AC, single phase 230/240V, 50 Hz of size 300 mm sweep with louvers including cutting of wall to suitable size to fix the exhaust fan with nut bolts etc., complete all as specified and as directed by Engineer-in-charge.
S&F 1100 volts grade heavy duty 16 sqmm cable PVC insulated stranded aluminum conductor served with inner sheathing of PVC tape and overall PVC sheathed for service connection suspended by insulating hangers not more than 1 Mtr apart including 4 mm suspension wire one twin core cable flat or circular including taking down old unserciveable cable, complete all as specified and as directed by Engineer-in-charge.
S&F 1100 volts grade heavy duty 6 sqmm cable PVC insulated stranded aluminum conductor served with inner sheathing of PVC tape and overall PVC sheathed for service connection suspended by insulating hangers not more than 1 Mtr apart including 4 mm suspension wire one twin core cable flat or circular, complete all as specified and as directed by Engineer-in-charge.
Supply and fix electric water heater, storage type steel body with opper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, hermostate, NRV, connection piece etc., complete all as specified and as directed by Engineer-in-charge.
Making connection of PP-R distribution branch with existing main of following sizes by providing and fixing tee including cutting and making fusion joint etc for dia of pipe 40 to 50mm complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 25 mm bore pipe, 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 32 mm bore pipe 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and as directed by Engineer-in-charge.
S&F gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe of 25 mm bore, complete all as specified and as directed by Engineer-in-charge.
Dismantling and lowering down of old rusted top plate/roof sheet made out of 3.15mm thick mild sheet from pressed steel water tank on 40 feet staging carefully without making any damage to other members after necessary unscrewing bolts, nuts, etc. complete all as specified and as directed by Engineer-in-charge.
Supply, errection, hoisting and fixing of mild steel top plate/roof sheet 3.15mm thick made to required shape and drilling necessary holes for fixing of bolts & nuts and fixed on existing pressed steel water tank on 40 feet staging including necessary wire mesh jaly as required complete all as specified and as directed by Engineer-in-charge.
Refixing of serviceable top plate obtained from serial item No. 221 after properly cleaning with the help of wire brush complete all as specified and as directed by Engineer-in-charge.
Dismantling and lowering down 5 mm thick pressed steel side plates of size 1.22m x 1.22m from pressed steel water tank on 40 feet staging, carefully without damage to other members after necessary unscrewing of bolts, nuts, washers etc including separating serviceable side plates of following thickness and kept in safe custody for reuse in the same work complete all as specified and as directed by Engineer-in-charge.
Dismantling and lowering down 6 mm thick pressed steel side plates of size 1.22m x 1.22m from pressed steel water tank on 40 feet staging, carefully without damage to other members after necessary unscrewing of bolts, nuts, washers etc including separating serviceable side plates of following thickness and kept in safe custody for reuse in the same work complete all as specified and as directed by Engineer-in-charge.
Supply, errection, hoisting and fixing of new pressed steel side plate of 1.22mx1.22m and 5 mm thick, made to required shape and drilling necessary holes for fixing of bolts and nuts in existing pressed steel water tank on 40 feet staging complete all as specified and as directed by Engineer-in-charge.
Supply, errection, hoisting and fixing of new pressed steel side plate of 1.22mx1.22m and 6 mm thick, made to required shape and drilling necessary holes for fixing of bolts and nuts in existing pressed steel water tank on 40 feet staging complete all as specified and as directed by Engineer-in-charge.
Fixing only old serviceable pressed steel side plate of size 1.22mx1.22m obtained from serial item No. 224 here-in-before of 5 mm thickness with nuts, bolts and washers in existing pressed steel water tank after proper cleaning with the help of wire brush on 40 feet staging complete all as specified and as directed by Engineer-in-charge.
Fixing only old serviceable pressed steel side plate of size 1.22mx1.22m obtained from serial item No. 225 here-in-before of 6 mm thickness with nuts, bolts and washers in existing pressed steel water tank after proper cleaning with the help of wire brush on 40 feet staging complete all as specified and as directed by Engineer-in-charge.
M&L for fixing water level indicator comprising of CI float oval type 250 mm dia at centre, MS pulley of 150 mm dia, mild steel indicators of suitable size permanently marked stranded stainless steel rope of 10mm dia and 03 m long including connection and accessories required for smooth functioning and testing on completion including dismantling unserviceable one complete all as specified and as directed by Engineer-in-charge.
Dismantling and lowering down mild steel tie bar made out of angle iron size 65mm x 65mm x 6mm and 2.00 metre long each from pressed steel water tank on 40 feet staging without any damage to other members with necessary unscrewing of bolts, nuts and washers complete all as specified and as directed by Engineer-in-charge.
Supply, errection, hoisting and fixing mild steel tie bars made out of angle iron of size 65mmx65mmx6mm and 3.00 metre long Each and drilling necessary holes for fixing of bolts & nuts in existing pressed steel water tank on 40 feet staging complete all as specified and as directed by Engineer-in-charge.
Fixing only serviceable tie bars obtained from serial item No 231 above duly cleaned complete all as specified and as directed by Engineer-in-charge.
Supply and fixing mild steel machine made nut and bolt 16-20 mm dia and not exceeding 5 cm long nuts and bolts with washers for fixing of steel plates, tie bars, etc. complete all as specified and as directed by Engineer-in-charge.
Supply and fixing mild steel machine made nut and bolt 11-15 mm dia and not exceeding 5 cm long nuts and bolts with washers for fixing of steel plates, tie bars, etc. complete all as specified and as directed by Engineer-in-charge.
Fixing only serviceable nuts, bolts and washers dismantled items for fixing of pressed steel plates, tie bar, roof sheets, etc. complete all as specified and as directed by Engineer-in-charge.
M&L for fixing leak proof materials comprising of lead wire, glass wool and black putty in existing pressed steel tanks to ensure water tightness after taking out old existing jointing materials by burning with blow lamps and cleaning and jointing surface complete all as specified and as directed by Engineer-in-charge.
Taking down carefully existing vertical 80mm bore GI pipe with all fittings (inlet, Overflow, outlet, washout pipes) from PS over head tank and refixed to water tanks after disconnecting the same from the tank and cleaning and removing all scale and dirt, etc. from inside of pipe, cleaning and removing the old screw threads and providing the new jointing materials and other fixing accessories (after carrying out necessary repair and painting of water tanks as stated under relevant items) complete all as specified and as directed by Engineer-in-charge.
Taking down unserviceable vertical pipes 80 mm bore GI pipe with all fittings (inlet, Overflow, washout pipes) complete all as specified and as directed by Engineer-in-charge.
Suppply and fixing of medium grade GI Pipe of 80 mm dia (including all fittings) and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of painted Old steel surfaces (inside surfaces of water tank) by removing all foreign particals from steel surfaces and cleaning throughly the surfaces and complete drying the surfaces and applying one coat of black bituminous paint suitable for drinking purpose in pressed steel water tank on 40 feet staging complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of new steel surfaces (inside surfaces of water tank) by removing all foreign particals from steel surfaces and cleaning throughly the surfaces and complete drying the surfaces and applying two coats of black bituminous paint suitable for drinking purpose in pressed steel water tank on 40 feet staging complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of old steel surfaces of water tank (out side surfaces) and priming with red oxide primer and applying one coat of synthetic enamel paint of existing colour complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of new steel surfaces of water tank (out side surfaces of replaced pressed steel sheets and tie bars and angle irons) and priming with red oxide primer and applying two coats of synthetic enamel paint of existing colour complete all as specified and as directed by Engineer-in-charge.
M & L for writing the letters "PS TANK CAP 45000 Ltrs" and " SAVE WATER" on the tank having 40 feet staging with white synthetic paint on front side and "MES" on other side. Size of letter shall not be less than 40 cm complete all as specified and as directed by Engineer-in-charge.
S&F cast iron sluice valve for 180 bore pipe heavy duty (PN-1.6) with brass spindle and iron wheel head flanged both ends and including all jointing materials required viz rubber gasket 3mm thick, bots, nuts and washers, complete all as per specified and as directed by Engineer-in-charge. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.
M/S NARAYAN ENTERPRISE
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .