PROVN OF TOILET 04X INDIAN CLOASET AND 02 URINAL PT FOR STUDENT WITH WATER TANK BEHIND BLDG NO T-12 IN CARIAPPA COY AT AEC TRG COLLEGE AND CENTRE PACHMARHI

Amount

Surface excavation in soft / loose soil nexc 30 cm deep and averaging 15 cm deep and getting out

Excavating in trenches in Hard/Dense soil n exc 1.5 m wide and n exc 1.5 m depth and getting out for foundation.

Returning filling in including spreading levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil.

Removing excavated materials n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone as in foundation /sub base of floor, filling and mass concrete.

Material and labour modular brick work in with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6.

M&L for 40 mm thick damp proof course in cement cocrete ratio 1:2:4 type B0 to horizantal surface including neccesary formwork complete all as specified and directed.

S&F TMT bars 10 mm dia and over as in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire [annealed] not less than 0.9 mm dia or scruing with clips.

All as per item no 8 above but 5mm dia and over upto and including 10mm in stirrups, spacers and binders complete all as specified and directed.

M&L PCC type B-1, 1:2:4 (using 20mm graded aggregate) as in coping ,benching, haunching including all necessary form work.

M&L for precasted cement concrete slab type B-1, 1:2:4 using 20mm graded aggregates as in manholes cover slab set in cement mortar 1:6.

M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in beams, lintels upto 1.5mtr span complete all as specified

M&L for formwork to the side and soffit of floor or roof beam,girders cantilevers , lintel shelves etc complete all as specified and directed.

M&L 10 mm thick plaster in cm(1:6) finished even &smooth with trowel without using extra cement sahll be provided over all internal surfaces of wall .

M&L external surfaces shall be plastered 15 mm thick in two layers on fair faces of brick work first layer (rendering coat) of plaster shall be 10mm thick in CM (1:6) & second layer (finishing Coat) shall be 5mm thick in cm(1:4).

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe 410 -W (Gde- E- 250) quality- A.

M&L for broken stone/boulders for hardcore of gauge nexc 63 mm, deposited, spread and levelled in layers nexc 15 cm thick in two layers watered and rammed to true surface.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40 mm graded stone as in sub base of floor.

M&L for 75mm thick PCC type C2, 1 :3 :6 using ( 20mm graded aggregate ) as in plinth protection / floor finishes surface with using extra cement.

S&F tubes 15 mm bore "medium grade" with all fittings & fixed complete to wall and ceilings or laid in floor all as specified and directed.

S&F tubes 20 mm bore "medium grade" with all fittings & fixed complete to wall and ceilings or laid in floor all as specified and directed

M&L for non skid, joint free, coloured ceramic tiles 7-8mm thick (Square/Rectunglar), area of each tile exc .06Sqm But not exc .11 Sqm etc set in floor and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles laid with and including over 15mm thick screed bed in CM (1:4), area of each tiles shall be of following complete all as specified and directed :-

M&L for glazed ceramic tiles in vertical surfaces 350 x 250 x 7 mm / 450 x 350 x 7 mm [thick] set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over 10mm thick screed in CM 1:3 (Note : screed bed will not be measured paid separately)

M&L for chequered cement concrete tiles 25mm thick etc set in floor and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles laid with and including over 15mm thick screed bed in CM (1:6), area of each tiles shall be of following complete all as specified and directed

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt I. capacity of tank 500litres

S&F Ball brass valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 20 mm bore pipe .

S & F 20 mm dia gun metal or gate valve with ironwheel head screwed both for iron pipe and fixed

S&F Vitreous China wash down water closet pan squatt pattern (orrissa pattern) of size 630x450mm white ( excluding flushing cistern and flush pipe)including trap

Supply only PVC valveless, syphonic action type 10 ltrs flushing cistern low level white with inlet, ball valve float and handle incl brackets [Make :Parryware( Slimline) / Commander (champion) / Hindware] complete all as specified & directed.

Supply only PVC connection 15mm size with PTMT nut of length 300mm

S&F 15mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F vitereous china wash basin, white flat back, size 550x400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, incl 32 mm dia brass CP waste fittings (coupling) including 32 mm waste pipe.

Vitreous China urinals, half stall type, complete including providingand fixing plugs, bedding urinalagainst wall in cement mortar 1:2, securing urinal to plugs withand including 60mm long brassscrews, pointing urinalback in cement; fixing automaticflushing cistern with brackets,flush pipe,grating and Union fordischarge pipe. (Exclusive offixing supply pipe to flushing cistern, trap and waste pipe)

Supply only 15mm dia pillar taps cast copper alloy chromium plated ,screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe (bore of pipe 15mm)

Supplied only Liquid water proofing compound.

S& F brass chromium plated tubular towel rail 20mm dia D type, 60 cm long between flanges

S&F 110mm PVC(SWR) bends any radius complete all as specified and directed.

PVC door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with MS square tube, suppling & fixing in opening as per specn & drg

S&F 100 mm size butt hinges extruded cold rolled with mild steel pin,bright polished type B11 medium weight, cold rolled.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F for sliding door bolt ofAluminium alloy anodised 250 mm complete

S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed

S&F 125 mm extruded aluminium alloy handles, fabricated type, anodised

S&F PVC (SWR) pipes 75 Dia single socketed, in any length with rubber ring joints, laid in trenches or in floors

M&L (SWR) 75mm dia floor trap plain with grating including jointing with solvent cement

S&F 75mm bore PVC (SWR) junction single, (single Tee) equal or unequal with access door

S &F 75mm bore (SWR) pipe single socketed in any length with rubber ring joints,fixed to walls

S&F 75mm bore PVC (SWR) vent cowl

S&F 75 mm bore PVC (SWR) bend of any radius

S&F Bib tap 15mm bore fancy type chromium plated , cast copper alloy with crutch or butterfly handle screwed down for iron pipes all as specified and as directed.

Material and labour for applying Three coat of white wash to newly treated plastered surfaces of wall complete all as specified and directed .

M&L 100 mm bore Salt - glazed stone ware drain pipes, ('A' grade) laid in trenches and jointed as specified.

M&L Plain cement Concrete ( 1:4:8) type D2 bed to 100 mm bore drain pipes including packing under , and haunching against the sides of pipes after they are laid and tested ;in complete all as specified.

S&F, Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified

S&F Steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F ordinary quality 3 mm sheet glass and glazed with oil putty n exc 0.50 sqm in each pane complete all as specified and directed.

M&L for preparation of newly surface and applying two coat of synthetic enammel paint over a coat of red oxide exceeding 10 cm width or girth complete all as specified and directed.

M&L for on site Hume Pipe septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Bk work, Vent shaft, RCC cover slab in M25/ SFRC cover and plaster in CM 1:4 as per TD Drg for 10 users etc.including removal of soil complete.

Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.2 M dia X 3 M effective depth

M&L for point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators complete for one light point or one exhaust fan point controlled by one switch.

S&F Switch piano flush button single pole one way 6 amp complete.

S&F ceiling rose 3 plates polycarbonate body complete.

S&F MCB distribution board SPN, 240 volts, 4 ways, powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces all as per Legrand cat ref no 607710 or equivalent in Hager or Schneider as approved.

S&F MCBs of breaking capacity 10 KA, 'C' series ISI marked double pole 6 amp provided in MCB DB.

S&F MCBs of breaking capacity 10 KA, 'C' series ISI marked single pole 6 amp provided in MCB DB.

S&F Exhaust fan 300mm sweep grey with bird guard to protect the fan in running condition with double ball bearings heavy duty motor with robust construction complete all fixing arrangement. Make : Havells. Model : Ventilair DB (FHVVEMTDBB12) or equivalent in Bajaj or USHA.

S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable as required all as per Philips cat ref no. WT202W LED6S CW PSU S1 PC or equivalent in Havells or GE Lighting as approved.

S&F LED 20 Watt streetlight made up of prressure die cast housing with prismatic polycarbonate diffuser and individual LED's with secondary optics and IP 65 protection complete with fixing arrangement and connection as directed as per Bajaj cat ref No. BCLST 20W LED I code 169829 or equivalent in C&S Elect or Havells as approved.

S&F angle holder, insulated polycabonate body with back plate complete. Make - Havells Reo / Anchor Penta PC / Indoasian as approved.

S&F LED batten (1.2 m) made of CRCA sheet housing with a PC glossy difusser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not more than 19 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make - Philips cat ref no. ENDURALED BATTEN "BN 108C LED 20S PSU CDL WH" or equivalent in Havells,or GE Lighting as approved.

M&L earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x6.0mm thick buried directly under ground vertically to a depth not less than 2.25 meter below ground level with top edge of the plate at a depth not less than 1.5m below ground level connected to and including galvanized iron wire 4.0mm not exceeding 7.5meters for each earth without protection pipe, by means of bolts, nuts, check nuts, and washers made out of GI all as shown on plate No 5 of SSR Part I to the extent applicable to this item including necessary making PCC pit of size 0.3 m x 0.3 m x 0.3 m (inner size) in mix 1:3:6 type C1 with RCC 1:2:4 type B-1, 40 mm thick cover reinforced with 6 mm dia MS bars 3 Nos both ways with lifting hook made out of 6 mm dia bar and complete all as specified and directed.

Cutting existing steel tubing for alterations or aditions of pipe size 40/50 mm bore and screwing complete.

Supply and lay pipe galvanized, “Medium class”, including fittings 20 mm (3/4”) dia.

Supply and fix Valve, stop, screwed, 20 mm (3/4”) dia pipe.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core.

M/S RAKESH TRADERS

DEEPAK JAISWAL

MODI CORPORATION