Construction of balance work of Govt. Ayurvedic Dispensary Building at Sarar Tehsil Salooni Distt. Chamba HP

Amount

Providing and laying mechanically mixed plain cement concrete in foundation and plinth, plain concrete mix 1: 4: 8 (one cement: four sand : eight graded crushed stone aggregate 40mm (forty millimeters) nominal size with 15% ( Fifteen percent) plum and curing complete, including the cost of form work in Retaining Wall, Breast Wall and parapets etcetera, the size of plum should be 150mm to 300mm ( one hundred fifty millimeters to three hundred millimeters), complete as per the drawing and HPPWD technical specification and direction of Engineer-in-Charge including hauling /carriage of labour equippments and materials to various location through all modes of transportation all leads, lifts and other incidental complete in all respect.

Providing and fixing 10.00 (Ten) litres capacity P.V.C low level flushing cistern with a pair of G.I.or mild steel brackets complete with fittings such as lead valve less syphone 15mm (fifteen millimeter) nominal size bras ball valve with polythene float C.P. Brass handle unions and coupling for connections with inlet, outlet and overflow pipes, 40mm (forty millimeter) dia C.P. flush bend including cutting holes in walls and making good the same and connection the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white i/c cutting holes and making good the same including fitting (Flat back) 630x450mm (six hundred thirty into four hundred fifty millimetre) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing 32mm (Thirty two milimetres) diameters C.P. brass waste (Heavy duty make ISI marked NO-8931 & 8934) for wash basin or sink. Within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing 32mm (Thirty two milimetres) nominal size diameters rubber plug for wash basin sink, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing 32mm (Thirty two milimetres) nominal size diameters M.I. union for wash basin sink, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing 32mm (Thirty two milimetres) nominal size diameters PVC waste pipe for wash basin sink including check nuts, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing 100mm (One hundred milimetres) nominal size diameters CP iron grating for nalhni trap complete, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing 600mmx450mm (six hundred millimeter into four hundred fifty millimeter) beveled edge mirror of superior glass mounted on 6mm (six millimeter) thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. screws and washers including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass brackets fixed to wooden plugs with C.P. brass 600x20mm (Six hundred nto twenty millimetre) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing 600x120mm (Six hundred into one hundred twenty milimetres) glass shelf with C.P. brass brackets and guard rail complete fixed to wooden plugs with C.P. brass screws, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing 15mm (Fifteen milimetres) diameters C.P. brass bib tap with capstan head, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing casealed C.P. brass stop cock 15mm (fifteen millimetre) dia (Heavey duty makes ISI marked No. 8931 & 8934) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing C.P. brass pillar tap with capstan head 15mm (fifteen millimetre) dia (Heavey duty makes ISI marked No. 8931 & 8934) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing PVC connection 15 mm including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and placing water tank of makes (sintex) having capacity 500 ( five hundred ) litres each with necessary fitting including over flow pipes scour pipe and bull valve and with cover locking arrangement including providing pads of sizes as required for inlet and outlet and inside painting of good quality all complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing angle valve 15mm (fifteen millimetre) with wheel including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and fixing brass ball valve ( Horizontal plunger type) high pressure with copper float 15mm (fifteen millimetre) nominal bore within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and laying to galvanized mild steel tubes (medium grade) in tenches including all tube fittings such as nipples, elbows, unions, tees and clamps (earth work trenches paid for seperately) including within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. i) 20mm (Twenty millimeters nominal bore/diameters.

Providing and fixing sand cast/cast iron spun spigot and socket soil, waste and ventilating pipes (lead caulked joints to be measured and paid for separately) including entire carriage of materials within all leads and lifts as per directions of Engineer-in-Charge.(b) 100mm (one hundred millimeter) nominal size/diameter.

Providing and fixing 100mm (one hundred millimetre) sand cast iron grating for gully, floor or nalhni trap including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing and laying to galvanized mild steel tubes (medium grade) in tenches including all tube fittings such as nipples, elbows, unions, tees and clamps (earth work trenches paid for seperately) including within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. ii) 15mm Fifteen millimeters nominal bore/diameters.

Puran Chand (BID ID -470037)