REPAIRS TO CHAIN LINK FENCING AND OTHER MISC WORKS AT ARMY LAND UNDER GE (I) CAMPBELL BAY

Amount

Dismantling fencing post/struts (steel/ RCC/wooden) of any section including taking out embedded portion and making good disturbed ground, post embedded in cement concrete/natural ground .

Demolition of cement concrete (unreinforced) of any description and in any position as specified and directed by Engineer in Charge.

Dismantling wrought iron or mild steel work of any description as in fillets, fencing post ,gate,hinges etc all as specified and as directed by Engineer in Charge

Dismantling fencing wire mesh, any type.

M & L for Plain Cement Concrete 1:4:8 type D2 using 40 mm graded granite stone aggregate in foundations, filling and mass concrete.

M & L for Providing reinforced cement concrete 1:2:4 type B-1 , using 20 mm graded aggregate in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 sq. cm, but n. exc 250Sq.cm with or without chamfered angles and flat, splayed, rounded or mitred tops making hole , cuttining etc for receiving wire, etc all as specified and directed as directed and fixed

Mild steel TMT bars 10 mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips

Mild steel TMT 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips

Mild steel round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips confirming to Fe-410-W(Gde.E-250)quality-A or Fe290(Gde-E-165)

S&F of flat iron fillets for securing wire mesh etc. including all necessary drilling holes for bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 all as specified and directed by Engineer-in-charge.

S&F of PVC coated chain link fencing of mesh size 50 x 50 mm , 3 mm overall dia wire with 1.0 mm PVC coating fixed to any type of standards, rails, posts, straining bolts etc. all as specified and directed by Engineer-in-charge.

M&L for MS screw bolts (machine made) 10mm to 12 mm dia with hexangonal or squre head at one end screwd other or screwd end fitted with wishers and one hexogonal or square not exc 125mm long with 3 mm thick one washer all as directed.

S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 -W, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete.

M&L preparation of new or previously treated surfaces of steel and iron surfaces not exc 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and directed.

Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

Note : An amount of Rs 12,942.00 towards Schedule of Credit shall be deducted to arrive the Contract sum.

bansal construction

M/S G S GREWAL