Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹68.5 LAccepted-Finance | ₹68.5 L | L1 | Accepted-Finance L1 |
| 2 | L2₹74.0 L+₹5.5 L (8.00%)Accepted-Finance | ₹74.0 L+₹5.5 L (8.00%) | L2 | Accepted-Finance L2 |
| 3 | Rejected-Technical | - | - | Rejected-Technical Bidder is not qualified in Technical Evaluation |
| 4 | Rejected-Technical | - | - | Rejected-Technical Bidder is not qualified in Technical Evaluation |
| 5 | Rejected-Technical NO 9 SIRI NAGAR LAYOUT BSF STS CIRCLE BAGALURU MAIN ROAD KATTIGENAHALLI IAF POST YELAHANKA BENGALURU 560063 | BENGALURU URBAN | KARNATAKA | 560063 | - | - | Rejected-Technical Bidder is not qualified in Technical Evaluation |
| Sl No | Description | Qty | Unit | SSBA BUILDERS PRIVATE LIMITED L1 | RSK CONSSTRUCTIONS L2 |
|---|---|---|---|---|---|
| 1.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 Cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) | 85.14 | Cum | 6,750 ₹5,74,695 Lowest | 7,200 ₹6,13,008 |
| 2.00 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding | 1,147.51 | Kgs | 180 ₹2,06,551.8 | 126 ₹1,44,586.26 Lowest |
| 3.00 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm | 1,111.1 | Sqm | 1,440 ₹15,99,984 | 1,233 ₹13,69,986.3 Lowest |
| 4.00 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete.. Size of Tile 600x600 mm | 50 | Sqm | 1,600 ₹80,000 | 1,239 ₹61,950 Lowest |
| 5.00 | Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineering-in-Charge | 430.09 | Sqm | 5 ₹2,150.45 Lowest | 18 ₹7,741.62 |
| 6.00 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion:Powder coated aluminium (minimum thickness of powder coating 50 micron) | 2,583.08 | Kgs | 540 ₹13,94,863.2 Lowest | 666 ₹17,20,331.28 |
| 7.00 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately):For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots, locking arrangements, handles, making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required etc., complete as per the directions of Engineer in-charge :Powder coated aluminium (minimum thickness of powder coating 50 micron) | 2,240.4 | Kgs | 630 ₹14,11,452 Lowest | 774 ₹17,34,069.6 |
| 8.00 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | 50 | Sqm | 1,000 ₹50,000 Lowest | 1,620 ₹81,000 |
| 9.00 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) | 30 | Sqm | 1,200 ₹36,000 Lowest | 1,620 ₹48,600 |
| 10.00 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors to the alumium shutters with necessary fittings complete etc., as per the directions of Engineer in-charge: Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides | 1,323.21 | Sqm | 1,100 ₹14,55,531 Lowest | 1,160 ₹15,34,923.6 |
Tender Value
₹76.8 L
EMD Value
₹1.5 L
Closing Date
30 Dec 2025, 3:20 pmClosed
The Dean
ESIC MCH at KK Nagar Chennai
Special Repair of Civil works to raising of the flooring in the Ayurvedic and PMR ward corridor includ. Tiles in A-block, GF and SS Mosquito net with aluminum section in staff qtrs and allied works at ESIC MCH, KK Nagar, Chennai-78
2025_ESIC_889220_1
02/EE/PMD/ ESIC/TN/KKN/SR/2025-2026
Open Tender
Civil Works
Works
120 days
ESIC MCH at KK Nagar Chennai
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹1.5 L
7 Apr 2026
10 Dec 2025
31 Dec 2025
10 Dec 2025
30 Dec 2025
10 Dec 2025
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 Cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineering-in-Charge
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion:Powder coated aluminium (minimum thickness of powder coating 50 micron)
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately):For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots, locking arrangements, handles, making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required etc., complete as per the directions of Engineer in-charge :Powder coated aluminium (minimum thickness of powder coating 50 micron)
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors to the alumium shutters with necessary fittings complete etc., as per the directions of Engineer in-charge: Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : (125 mm)
Providing and fixing aluminium tower bolts, ISI marked, anodised ( anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade, with necessary screws etc, complete (200 X 10 mm)
stage.html
html • 0.04 MB
techsummary_934687.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 21.25 MB
BOQ_934687.xls
BOQ • 0.33 MB
AblockNITSRwithGCC.pdf
Tender Documents • 21.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .