SPECIAL REPAIR TO BLDG NO ET-19 (OR LIVING ACCN) AT HATTIGOR MIL STN UNDER GE RANGIYA

Amount

Dismantling Unframed timber scantlings 40 Sq. cm and over in section and in any position complete all as specified and directed

M&L 2nd class hard wood in scantling wrought timber framed and fixed complete all as specified and directed

S&F Mild steel work in hand rails, wind ties, posts and struts in fencing screwed or welded to shape as directed, including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 410 - O or Fe 310 - O complete all as specified and directed

Demolition of reed lathing any type in walls including battens and plaster or chicken wire lathing complete all as specified and directed

M&L G I Wire netting 0.9 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc., in walls, ceilings, stanchions, beams, etc., including all laps, cutting and waste complete all as specified and directed

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed

M&L Brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed

M&L for rendering 15 mm thick on fair faces of brick work or one side of lathing in cement mortar 1:4 , surface finished even and smooth without using extra cement complete all as specified and directed

M&L10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished smooth and even without using extra cement complete all as specified and directed

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed

M&L for 4mm thick E-board of size (595x595)mm fixed in Powder coated GI frame work(snap grid) of standard section as per manufacturers instructions and hang with 3mm thick GI wire in ceiling complete all as specified and directed

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness complete all as specified and directed

M&L 40 mm thick Cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) in flooring finished even and smooth without using extra cement complete all as specified and directed

S&F 38mm wide glass strip, 3mm thick,inserted in position ,conform to design complete all as specified and directed

M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in hard standing/pavings/plinth protections, finished even and smooth using extra cement complete all as specified and directed

Taking down shutters of any description not exceeding 1 Sq. M each complete all as specified and directed

Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each complete all as specified and directed

M&L 35 mm thick second class hardwood glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc (without sash bar) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of member (Bottom 250mm,stiles 100mm,top 120mm & lock rail160mm wide) as specified in SSR part I section & clause 8.24 (a) complete all as specified and directed

S&F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with (stiles and rails 80mm,muntins 60mm & glazing bars 45mm wide) as specified in SSR Pt I Section 8, clause 8.24 (b) complete all as specified and directed

S&F 35mm thick Flush shutters,solid core construction,with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F 4 mm thick Sheet glass, ordinary quality in squares not exceeding 0.5 Sq. M in each pane fixed with cut & mitred beads complete all as specified and directed

S&F Second class hard wood plain wrought fillets square, rectangular or triangular in section, bull nosed splayed chamfered or rounded on one edge or face sectional area exceeding 3 and not exceeding 6 Sqcm fixed with nails or brads complete all as specified and directed

S&F stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanized wire staples fixed to aluminum window with aluminium beads and screws complete all as specified and directed

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed

S&F 125 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed

S&F 75 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 21 complete all as specified and directed

S&F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 21 complete all as specified and directed

S&F 125 mm long extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed

S&F 150 mm long extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed

S&F 300 mm long Mild steel ordinary rat tail rod pattern spring, including roller and roller plate complete all as specified and directed

Dismantling asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings complete all as specified and directed

Dismantling boarding, any description fixed in any position with nails complete all as specified and directed

S&F Pre-painted galvatume aluminium zince coating GI based corrugated steel sheet of makeTATA Blue scope 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J hooks complete all as specified and directed

S&F Pre-painted galvatume aluminium zince coating GI based plain steel sheet of make(TATA Blue Scope) 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J hooks complete all as specified and directed

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed

M&L for preparing new plastered surfaces and applying two coats of cement base paint on surfaces of walls. Incl primer complete all as specified and directed

M&L preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and directed

Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed

Preparation of newly untreated wood or wood base surfaces of any description, not exceeding 10 cm width or girth, not otherwise described and applying two coat of Synthetic Enamel paint over a coat of pink primer complete all as specified and directed

M&L anti termite treatment of soil under existing floors using emulsion @ one lit /hole 3oomm apart incl drilling holes and plugging 12mm dia holes with CM 1 : 2 to match existing floor complete all as specified and directed

All as per item No 42 here-in-before but along the external wall below concrete using emulsion @ 2.25 lit/linear metre incl drilling and plugging holes complete all as specified and directed

M&L ATT at point of contact of wood work by chemical emulsion @ 0.50 lit per hole by drilling 6mm dia holes at down ward angle of 45 Degree 150mm c/c and sealing the same complete all as specified and directed

Surface excavation n. exc. 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed

M&L 75 mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded stone aggregate) in Path and hard standing finished even and smooth with extra cement and making impressions of XPM whilst the conc. Is green complete all as specified and directed

M&L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L 75mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and directed

M&L precast cement concrete chequered tiles 300x300x25mm thick finish set jointed and pointed in with grey cement and pigment laid over and incl 20mm thick screed bed in CM 1:4 in floorings complete all as specified and directed

M&L for preparation of old painted surfaces of wood and wood based materials of any description, not otherwise described and applying one coat of Synthetic enamel paint over 10 cm width or girth complete all as specified and directed

M&L preparing old painted surfaces including washing, rubbing down and stopping and applying one coat of cement based paint on walls incl primer complete all as specified and directed

E/M Portion:- Taking down carefully aluminium conductor point wiring (light, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. to match with the existing complete all as specified and directed

Taking down carefully U/S main switches and DB’s incl wooden boards and removing from site incl making good disturbed surfaces of walls all complete as specified and as directed.

Dismantling of house service brackets of any size and type and making good the distrubed wall surfaces complete all as specified and directed.

M&L for point wiring with 1.5 sqmm size (nominal area) PVC insulated single core multi stranded copper conductor cable drawn into and incl PVC casing capping sleeves and caps of adequate width and length with all accessories and fittings like bends . elbow crosses and PVC rectangular block of wall plastic laminated sheet cover thickness 1.5 mm as directed for mounting fittings etc like switches sockets and fan regulator incl 1.5 sqmm size PVC insulated multistranded copper conductor cable as earth continuity conductor and connected to earth dolly complete all as specified and as directed for the followings :-

One light point controlled by one switch

One ceiling fan, exhaust fan point controlled by one switch

One 3 pin socket combination 5 Amps on independent board with cables 1.5 sq.mm size

One 3 pin socket 5 amps on the same board with other switches with cables 1.5 sqmm size

M&L for point wiring with 4.0 sqmm size (nominal area) PVC insulated single core multi stranded copper conductor cable drawn into and incl PVC casing capping sleeves and caps of adequate width and length with all accessories and fittings like bends . elbow crosses etc and PVC rectangular block og wall & plastic laminated sheet cover thickness 1.5 mm as directed for mounting fittings etc like switches sockets incl 4.0 sqmm size PVC insulated multistranded copper conductor cable as earth continuity conductor and connected to earth dolly complete all as specified and as directed for one 3 pin socket outlet,15amps,independant board complete all as specified and directed.

S & F switch piano flush type single pole 5 AMPs 230 volts complete as specified and as directed

S & F socket outlet 2 in1,3 Pin, 5 AMPs flush type complete all as specified and as directed

S & F switch socket combination 2 in 1,3Pin 5 Amps flush type complete all as specified and as directed

S & F switch socket combination 5 in 1, 5A/16 Amps flush type complete all as specified and directed.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd including necessary electric connection complete all as specified and directed.

S & F ceiling rose three terminals PVC/Polycarbonate, isolated body complete all as specified and directed.

S&F Fluorescent tube light fittings REGAL BATTEN FOR LED, Wall mounted , extruded head dissipation & integrated with crystal glass LED tubelight (double/single side connection) 18 W LED (4ft), 230V, complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable from ceiling rose to tube light fitting complete all as specified and directed.

S & F lamp holder PVC/Polycarponate type with back plate suitable for batten fittings incl 10 Watt LED lamp complete all as specified and directed

S & F PVC rectangular block for mounting, DB,s etc. with 3mm thick plastic laminated sheet cover of size 250x200x40 mm deep complete all as specified and as directed.

S&F sheet metal enclosures for DB's when MCBs to be used single pole & neutral 8 way 240 volt with 100 Amps with rated bus bar complete all as specified and directed.

S&F for MCB single pole and neutral 32 Amps capacity 10 KA 240 Volt complete all as specified and directed

S&F for MCB single pole of capacity 6 to 32 Amps 10 KA 240 volt complete all as specified and directed.

S&F 1100 volts grade heavy duty cable PVC insulated and sheathed aluminum conductor in service connections suspended by insulating hangers not more than 1 Mtr apart including 4 mm suspension wire one twin core cable flat or circular of 16 Sqmm size with multistranded conductor incl taking down the existing complete.Note-Service wire from pole passing through insulating hangers,bracket and upto DB shall be measured as one length.

Taking down/Refixing of old ceiling/exhaust fan to its original location and testing complete all as directed.

Supply and Fixing LED wall security light fittings 15 W suitable for New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium housing with high power LED as light source and lens embedded PC cover having TOP OPENING separate driver compertment with IP65 protection and impact resistance of IK)& Make Havells/ Bajaj/Crompton/Surya, complete all as specified and directed.

S&F House service bracket (Hook type) complete with 3.0m long G.I pipe 40mm dia medium grade, two nos.90 degree bends, M.S hook and stay etc complete all as specified and directed.

M/L for earthing with galvanized steel earth plate 60cm X 60cm X 6 mm thick, buried directly in ground(earth pit not less than 2.25 mtr deep below ground level) with the top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel and earth plate surrounded by packed layers of coal dust and common salt 15 cm thick all around top and bottom all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including necessary excavation and earth work PCC (1: 3:6) type C1 earth pit, cast iron pit cover, funnel with water pipe 20mm dia light grade,1.5mtr long and 15mm bore light grade from earth plate to test point or main switch/DB as protection pipe and testing on completion including excavation earth work and disposal of surplus soils complete all as specified and directed.

S&F street light bracket made out of GI tubing medium grade 1.20 Mtr long bend to required shape as in bracket for street light fittings fixed with two pair or MS flat iron 40mm x 5mm size and 30cm long clamp of required shape with bolts nuts and washers suitable for steel tubular pole including painting of mild steel flat iron surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete of size 25 mm complete all as specified and directed.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the IRC specifications shall be followed. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule "A" notes for details.

M/S KIRAN ENTERPRISE

M/S NARAYAN ENTERPRISE

M/S S.S. Construction

M/S SITAL BUILDERS

G.K. TRADERS